graphics/yafray: Removed from 13.0 repository

4 files changed, 0 insertions, 126 deletions

diff --git a/graphics/yafray/README b/graphics/yafray/README
deleted file mode 100644
index 2fdf3d036a..0000000000
--- a/graphics/yafray/README
+++ /dev/null
@@ -1,8 +0,0 @@
-YafRay is a powerful raytracer, under the LGPL license. It enables you to
-create fantastic images and animations of a photorealistic quality.
-
-YafRay's dependencies are:
-
-libc, libgcc, libstdc++, libjpeg, zlib included in Slackware 12.1. 
-
-scons, libopenexr, and ilmbase available at SlackBuilds.org.
diff --git a/graphics/yafray/slack-desc b/graphics/yafray/slack-desc
deleted file mode 100644
index 00f329994c..0000000000
--- a/graphics/yafray/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-yafray: Yafray (Free Raytracing for the masses)
-yafray:
-yafray: YafRay is a powerful raytracer, under the LGPL license. It enables
-yafray: you to create fantastic images and animations of a photorealistic
-yafray: quality. 
-yafray: 
-yafray: For more information, see: http://www.yafray.org/
-yafray: 
-yafray: 
-yafray: 
-yafray: 
diff --git a/graphics/yafray/yafray.SlackBuild b/graphics/yafray/yafray.SlackBuild
deleted file mode 100644
index 41ca01e256..0000000000
--- a/graphics/yafray/yafray.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for yafray
-#
-# This script is very fragile and works around the Scons setup, so be
-# careful when upgrading to a new version!
-#
-# Written by Brian Muramatsu (brian@fhobia.org)
-
-PRGNAM=yafray
-VERSION=0.0.9
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-# Extracts to "yafray" rather than "yafray-0.0.9" as might be expected.
-tar xvzf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM
-chown -R root:root . 
-chmod -R u+w,go+r-w,a-s .
-
-# SConstruct uses linux-settings.py to parse arguments. In the get_cxxflags,
-# it looks for "arch" and "tune" and doesn't seem to look at the regular 
-# CFLAGS and CXXFLAGS. These are the only optimization flags I saw in
-# linux-settings.py.
-if [ "$ARCH" = "i486" ]; then
-  SCONFLAGS="arch=i486 tune=i486"
-elif [ "$ARCH" = "i586" ]; then
-  SCONFLAGS="arch=i586 tune=i586"
-elif [ "$ARCH" = "i686" ]; then
-  SCONFLAGS="arch=i686 tune=i686"
-fi
-
-# linux-settings.py shows that there is only the "prefix" flag to control
-# where files will be copied to. Set the prefix to the SBo package directory,
-# so that we can work on the package there.
-SCONFLAGS="prefix=$PKG/usr $SCONFLAGS"
-
-# Equivalent to the usual "make" step...
-scons $SCONFLAGS
-
-# The Yafray wiki says you need to put the flags again or else the information
-# about the architecture will be lost, and it will compile it all over again!
-#
-# http://wiki.yafray.org/bin/view.pl/UserDoc/FaqEng#Compilation
-scons $SCONFLAGS install
-
-# Move /usr/etc/gram.yafray to /etc/gram.yafray. Other distributions like
-# Debian, Fedora, and Gentoo seem to do the same. At this point, I don't know
-# what the impact of moving this is, but it does not seem to impede Yafray's
-# function as described in the README.
-mkdir $PKG/etc
-mv $PKG/usr/etc/gram.yafray $PKG/etc/gram.yafray
-rm -rf $PKG/usr/etc
-
-# Yafray's code seems to hardcode /usr/local/lib...so create a symlink from
-# /usr/local/lib/yafray to /usr/lib/yafray. This made Blender work properly
-# with Yafray immediately after installing this package.
-mkdir -p $PKG/usr/local/lib
-ln -sf /usr/lib/yafray $PKG/usr/local/lib/yafray
-
-# Copy over documentation. The only difference is there are some technical
-# documents under the doc directory that are also copied besides the usual
-# suspects.
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a AUTHORS COPYING ChangeLog INSTALL LICENSE NEWS README doc $PKG/usr/doc/$PRGNAM-$VERSION
-find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \;
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Strip some libraries and binaries
-( cd $PKG
-   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-   find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-
-# Build the package
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/graphics/yafray/yafray.info b/graphics/yafray/yafray.info
deleted file mode 100644
index 5344d7e367..0000000000
--- a/graphics/yafray/yafray.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="yafray"
-VERSION="0.0.9"
-HOMEPAGE="http://www.yafray.org/"
-DOWNLOAD="http://www.yafray.org/sec/2/downloads/yafray-0.0.9.tar.gz"
-MD5SUM="7365122e0ca6f439988f51e8b4db935c"
-MAINTAINER="Brian Muramatsu"
-EMAIL="brian@fhobia.org"
-APPROVED="David Somero"
\ No newline at end of file