system/sleepd: Added (power management daemon).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

6 files changed, 230 insertions, 0 deletions

diff --git a/system/sleepd/README b/system/sleepd/README
new file mode 100644
index 0000000000..593d544f7e
--- /dev/null
+++ b/system/sleepd/README
@@ -0,0 +1,15 @@
+sleepd is a daemon to to put a laptop to sleep if it is not
+being used or if the battery is low.
+
+You'll need to add the following lines to /etc/rc.d/rc.local.
+# Start sleepd
+if [ -x /etc/rc.d/rc.sleepd ]; then
+  /etc/rc.d/rc.sleepd start
+fi
+
+You should then add the following to /etc/rc.d/rc.local_shutdown.
+# Stop sleepd
+if [ -x /etc/rc.d/rc.sleepd ]; then
+  /etc/rc.d/rc.sleepd stop
+fi
+
diff --git a/system/sleepd/doinst.sh b/system/sleepd/doinst.sh
new file mode 100644
index 0000000000..d749cbc1ab
--- /dev/null
+++ b/system/sleepd/doinst.sh
@@ -0,0 +1,25 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.sleepd.new
diff --git a/system/sleepd/rc.sleepd b/system/sleepd/rc.sleepd
new file mode 100644
index 0000000000..bbfa1b0f15
--- /dev/null
+++ b/system/sleepd/rc.sleepd
@@ -0,0 +1,68 @@
+#!/bin/sh
+
+# /etc/rc.d/rc.sleepd
+# Start/stop/restart the Wicd daemon
+
+PIDFILE="/var/run/sleepd.pid"
+DAEMON="/usr/sbin/sleepd"
+
+# Define start and stop functions
+
+sleepd_start() {
+  if [ -e $PIDFILE ]; then
+    echo "sleepd appears to already be running."
+    echo "If this is not the case, then remove "
+    echo "$PIDFILE and try again..."
+    exit 1
+  else
+    echo "Starting sleepd: $DAEMON &"
+    sleepd 2>/dev/null 1>&2 &
+  fi
+}
+
+sleepd_force_stop() {
+  echo "Force stopping sleepd..."
+  if [ -e $PIDFILE ]; then
+    kill $(cat $PIDFILE) 2>/dev/null
+    rm -f $PIDFILE 2>/dev/null
+  else
+    killall -9 sleepd 2>/dev/null
+  fi
+}
+
+sleepd_stop() {
+  echo "Stopping sleepd..."
+  if [ -e $PIDFILE ]; then
+    kill $(cat $PIDFILE) 2>/dev/null
+    rm -f $PIDFILE 2>/dev/null
+  fi
+}
+
+sleepd_status() {
+  sleepctl status
+}
+
+# See how we were called and take appropriate action
+
+case $1 in
+  start)
+    sleepd_start
+   ;;
+  stop)
+    sleepd_stop
+   ;;
+  force_stop)
+    sleepd_force_stop
+   ;;
+  restart)
+    sleepd_force_stop
+    sleepd_start
+   ;;
+  status)
+    sleepd_status
+   ;;
+  *)
+    echo "Usage: $0 {start|stop|restart|status}"
+    exit 1
+   ;;
+esac
diff --git a/system/sleepd/slack-desc b/system/sleepd/slack-desc
new file mode 100644
index 0000000000..3f8263a845
--- /dev/null
+++ b/system/sleepd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+sleepd: sleepd (A daemon to put an inactive or low battery laptop to sleep)
+sleepd:
+sleepd: Sleepd is a daemon to put a laptop to sleep if it is not being used
+sleepd: or if the battery is low.
+sleepd:
+sleepd: It supports HAL, APM, and ACPI, although external programs must be
+sleepd: used to actually put the system to sleep.
+sleepd:
+sleepd:
+sleepd:
+sleepd:
diff --git a/system/sleepd/sleepd.SlackBuild b/system/sleepd/sleepd.SlackBuild
new file mode 100644
index 0000000000..693a06789f
--- /dev/null
+++ b/system/sleepd/sleepd.SlackBuild
@@ -0,0 +1,93 @@
+#!/bin/sh
+# Slackware build script for sleepd
+
+# Copyright 2017 Kenneth Chan <kenneth dot t dot chan at gmail dot com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM="sleepd"
+VERSION=${VERSION:-2.05}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+sed -i "s|share/man|man|"g Makefile
+
+make
+make install PREFIX=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.sleepd > $PKG/etc/rc.d/rc.sleepd.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a GPL INSTALL TODO $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/sleepd/sleepd.info b/system/sleepd/sleepd.info
new file mode 100644
index 0000000000..8dc87b89c5
--- /dev/null
+++ b/system/sleepd/sleepd.info
@@ -0,0 +1,10 @@
+PRGNAM="sleepd"
+VERSION="2.05"
+HOMEPAGE="https://joeyh.name/code/sleepd"
+DOWNLOAD="https://git.kitenet.net/index.cgi/zzattic/sleepd.git/snapshot/sleepd-2.05.tar.gz"
+MD5SUM="36c1109631b763879c1e3c3e84492acd"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Kenneth Chan"
+EMAIL="kenneth.t.chan@gmail.com"