office/rastertospp: Removed (no SBo maintainer)

Nothing else in the repo needs this, so there's not any
good reason for us to continue carrying it.

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

4 files changed, 0 insertions, 142 deletions

diff --git a/office/rastertospp/README b/office/rastertospp/README
deleted file mode 100644
index 5dc271fafe..0000000000
--- a/office/rastertospp/README
+++ /dev/null
@@ -1,22 +0,0 @@
-SPP-2020 is a cheap photo printer from Samsung. The print quality is
-great and usage costs are acceptable. However the manufacturer doesn't
-provide a Linux driver which is somewhat strange for Samsung.
-
-The rastertospp is a CUPS raster converter that takes a cups-raster as
-its input, and on the output spits a stream of data suitable for direct
-sending to the printer. This is one possible form of a driver for CUPS,
-the one which makes most sense in the case of this printer.
-
-Print quality of this driver seems the same as from the Windows driver,
-no color profiling is done. As of version 1.1 there is an "Avoid
-clipping" option (default: on) which in some cases yields better results
-than stock Windows driver.
-
-Data format suitable for the printer was derived by analysing several
-print-to-files made on Windows.
-
-Only best-quality on 4x6" (~10-15cm) photo paper is implemented but it
-seems the only use-case anyway.
-
-NOTE: The ppd file required for this printer is located in
-/usr/share/cups/model/Samsung. It's called Samsung_SPP-2020.ppd.
diff --git a/office/rastertospp/rastertospp.SlackBuild b/office/rastertospp/rastertospp.SlackBuild
deleted file mode 100644
index 6d3269135f..0000000000
--- a/office/rastertospp/rastertospp.SlackBuild
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for rastertospp
-#
-# Copyright 2009 Pierre Cazenave <pwcazenave {at} gmail [dot] com>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=rastertospp
-VERSION=${VERSION:-1.1}
-BUILD=${BUILD:-2}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-chmod -R u+w,go+r-w,a-s .
-
-# Make an output
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/cups/filter
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-gcc -Wall $(cups-config --image --libs) -o $PKG/usr/lib${LIBDIRSUFFIX}/cups/filter/$PRGNAM ./$PRGNAM.c
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-# Add the ppd
-mkdir -p $PKG/usr/share/cups/model/Samsung
-install -m 644 Samsung_SPP-2020.ppd $PKG/usr/share/cups/model/Samsung/
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a README $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README$TAG
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/office/rastertospp/rastertospp.info b/office/rastertospp/rastertospp.info
deleted file mode 100644
index abcc68f062..0000000000
--- a/office/rastertospp/rastertospp.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="rastertospp"
-VERSION="1.1"
-HOMEPAGE="http://koprowski.org/rastertospp/"
-DOWNLOAD="http://koprowski.org/rastertospp/rastertospp-1.1.tar.gz"
-MD5SUM="386b6b6ef2273e772a8f49a2d65a7604"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Pierre Cazenave"
-EMAIL="pwcazenave <at> gmail {dot} com"
diff --git a/office/rastertospp/slack-desc b/office/rastertospp/slack-desc
deleted file mode 100644
index 85593e7926..0000000000
--- a/office/rastertospp/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-           |-----handy-ruler------------------------------------------------------|
-rastertospp: rastertospp (CUPS raster converter)
-rastertospp:
-rastertospp: The rastertospp is a CUPS raster converter that takes a cups-raster
-rastertospp: as its input, and on the output spits a stream of data suitable for
-rastertospp: direct sending to the printer. This is one possible form of a driver
-rastertospp: for CUPS, the one which makes most sense in the case of this printer.
-rastertospp: Print quality of this driver seems the same as from the Windows
-rastertospp: driver, no color profiling is done. As of version 1.1 there is an
-rastertospp: "Avoid clipping" option (default: on) which in some cases yields
-rastertospp: better results than stock Windows driver.
-rastertospp: Homepage: http://koprowski.org/rastertospp/