office/remind: Added (A command-line calendar)

Signed-off-by: Niels Horn <niels.horn@slackbuilds.org>

4 files changed, 250 insertions, 0 deletions

diff --git a/office/remind/README b/office/remind/README
new file mode 100644
index 0000000000..88cfb6ffb9
--- /dev/null
+++ b/office/remind/README
@@ -0,0 +1,35 @@
+Remind is a sophisticated command-line calendar and alarm program
+with a sophisticated scripting language and intelligent handling of
+exceptions and holidays.
+
+There are several options to pass to this script at compile-time.
+Some of these options can be changed at run-time through SET
+commands, while others (language, date/time separators, character
+set, and the -u option) must be chosen at compile-time. Pass these
+using `VAR=value ./remind.SlackBuild`:
+LANGUAGE=LANG (default: ENGLISH), set the language. See the SlackBuild
+for possible language options.
+
+LAT_DEG=# (default: 45), set the latitudinal degrees
+LAT_MIN=# (default: 24), set the latitudinal minutes
+LAT_SEC=# (default: 0), set the latitudinal seconds
+LON_DEG=# (default: 75), set the longitudinal degrees
+LON_MIN=# (default: 39), set the longitudinal minutes
+LON_SEC=# (default: 0), set the longitudinal seconds
+LOCATION=location (default: Ottawa), set the location string
+See the SlackBuild for more information on these variables.
+
+DEFAULT_PAGE=Letter|A4 (default: Letter), set the default page size
+DATESEP=-|/ (default: -), set the date separator character
+TIMESEP=:|. (default: :), set the time separator character
+
+CHARSET=ASCII|ISOLATIN1|ISOLATIN2|IBMEXTENDED|IBM852
+(default: ISOLATIN1), set the character set to use
+
+WANTU=yes|no (default: yes), enable/disable the -u option (which
+runs remind with the uid and gid of the specified name)
+
+There are a number of graphical front-ends to remind. tkremind is
+included, but requires tcllib (available from SlackBuilds.org) as
+a run-time requirement. Using remind via the command-line (or via
+other front-ends) does not require tcllib.
diff --git a/office/remind/remind.SlackBuild b/office/remind/remind.SlackBuild
new file mode 100644
index 0000000000..c8f1ea81f7
--- /dev/null
+++ b/office/remind/remind.SlackBuild
@@ -0,0 +1,186 @@
+#!/bin/sh
+
+# Slackware build script for Remind
+
+# Written by T3slider <t3slider@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=remind
+VERSION=${VERSION:-03.01.10}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# Valid options for LANG are one of the following:
+# ENGLISH, GERMAN, DUTCH, FINNISH, FRENCH, NORWEGIAN, DANISH, POLISH, BRAZPORT,
+# ITALIAN, ROMANIAN, SPANISH, ICELANDIC
+LANGUAGE=${LANGUAGE:-ENGLISH}
+
+# You can also pass your location via the following variables (this ensures that
+# sunrise, sunset, etc. work as expected for your location):
+# LAT_DEG, LAT_MIN, LAT_SEC, LON_DEG, LON_MIN, LON_SEC, LOCATION
+# By default these point to Ottawa, Ontario. From custom.h:
+
+# LAT_DEG, LAT_MIN and LAT_SEC: Latitude of your location
+# LON_DEG, LON_MIN and LON_SEC: Longitude of your location
+# LOCATION: A string identifying your location.
+# All latitude and longitude numbers should be positive for the
+# northern and western hemisphere.  If you live in the southern
+# hemisphere, ALL latitude values should be negative.  If you live
+# in the eastern hemisphere, ALL longitude values should be negative.
+# The default values are initially set to Ottawa, Ontario, Canada.
+LAT_DEG=${LAT_DEG:-45}
+LAT_MIN=${LAT_MIN:-24}
+LAT_SEC=${LAT_SEC:-0}
+LON_DEG=${LON_DEG:-75}
+LON_MIN=${LON_MIN:-39}
+LON_SEC=${LON_SEC:-0}
+LOCATION=${LOCATION:-Ottawa}
+
+# Default page size to use for Rem2PS. Options are Letter or A4.
+DEFAULT_PAGE=${DEFAULT_PAGE:-Letter}
+
+# Default date separator (this works for input only). Options are
+# - or /
+DATESEP=${DATESEP:--}
+
+# Default time separator. Options are : or .
+TIMESEP=${TIMESEP:-:}
+
+# Character set to use. Options are ASCII, ISOLATIN1, ISOLATIN2,
+# IBMEXTENDED, or IBM852.
+CHARSET=${CHARSET:-ISOLATIN1}
+
+# If you do not want the -u option (which runs remind with the
+# uid and gid of the specified name), pass "no" (without quotes)
+# to this option.
+WANTU=${WANTU:-yes}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# You can also use Tcl/Tk's `wish` to configure and build remind graphically,
+# but this is untested. If you wish to try, uncomment the following line:
+#wish ./build.tk
+# Note that this would also require commenting out everything up to (but NOT
+# including) the "make install" line below, since that should (in theory) be
+# done by the build.tk script. I don't know how this would affect the package
+# directories. I would advise passing the options as variables without using
+# wish unless you want to have fun.
+
+# Set the proper options from the options passed to this script. Sorry for
+# the mess...
+sed -i "s/^\(#define LANG \).*/\1$LANGUAGE/" src/lang.h
+sed -i "s/^\(#define LAT_DEG \).*/\1$LAT_DEG/" src/custom.h
+sed -i "s/^\(#define LAT_MIN \).*/\1$LAT_MIN/" src/custom.h
+sed -i "s/^\(#define LAT_SEC \).*/\1$LAT_SEC/" src/custom.h
+sed -i "s/^\(#define LON_DEG \).*/\1$LON_DEG/" src/custom.h
+sed -i "s/^\(#define LON_MIN \).*/\1$LON_MIN/" src/custom.h
+sed -i "s/^\(#define LON_SEC \).*/\1$LON_SEC/" src/custom.h
+sed -i "s/^\(#define LOCATION \).*/\1\"$LOCATION\"/" src/custom.h
+if [ "$DEFAULT_PAGE" = "A4" ]; then
+	sed -i 's|^#define DEFAULT_PAGE {"Letter", 612, 792}|/* & */|' src/custom.h
+	sed -i 's|^\(/\* \)\(#define DEFAULT_PAGE {"A4", 595, 842}\)\( \*/\)|\2|' src/custom.h
+fi
+if [ "$DATESEP" = "/" ]; then
+	sed -i "s|^#define DATESEP '-'|/* & */|" src/custom.h
+	sed -i "s|^\(/\* \)\(#define DATESEP '/'\)\( \*/\)|\2|" src/custom.h
+fi
+if [ "$TIMESEP" = "." ]; then
+	sed -i "s|^#define TIMESEP ':'|/* & */|" src/custom.h
+	sed -i "s|^\(/\* \)\(#define TIMESEP '\.'\)\( \*/\)|\2|" src/custom.h
+fi
+sed -i "s/^\(#define ISOLATIN1 \).*/\1 0/" src/custom.h
+if [ "$CHARSET" != "ASCII" ]; then
+	sed -i "s/^\(#define $CHARSET \).*/\1 1/" src/custom.h
+fi
+if [ "$WANTU" = "no" ]; then
+	sed -i 's|^#define WANT_U_OPTION 1|/* & */|' src/custom.h
+fi
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  COPYRIGHT MICROSOFT-AND-APPLE README \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/office/remind/remind.info b/office/remind/remind.info
new file mode 100644
index 0000000000..348e0f4bb9
--- /dev/null
+++ b/office/remind/remind.info
@@ -0,0 +1,10 @@
+PRGNAM="remind"
+VERSION="03.01.10"
+HOMEPAGE="http://www.roaringpenguin.com/products/remind"
+DOWNLOAD="http://www.roaringpenguin.com/files/download/remind-03.01.10.tar.gz"
+MD5SUM="f6f7829d3ac92e0d6d463c59b5e6ce3f"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="T3slider"
+EMAIL="t3slider@gmail.com"
+APPROVED="Niels Horn"
diff --git a/office/remind/slack-desc b/office/remind/slack-desc
new file mode 100644
index 0000000000..8fea13e995
--- /dev/null
+++ b/office/remind/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+remind: remind (a command-line calendar)
+remind:
+remind: Remind is a sophisticated command-line calendar and alarm program
+remind: with a sophisticated scripting language and intelligent handling of
+remind: exceptions and holidays.
+remind:
+remind: There are a number of graphical front-ends to remind. tkremind is
+remind: included.
+remind:
+remind: http://www.roaringpenguin.com/products/remind
+remind: