blob: 5b8d5faf36056095fdc26b5f63594bb8d5af3351 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards. Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards. PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards. Those are set by
# the PCI hotplug subsystem.
#
# These are the official ports to use from pcmcia-cs:
#include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
# However, ports 0x810-0x81f hurt on some DELL machines and
# ports 0x3b0-0x3df hurt on some FSC machines, so we use this port
# list instead:
include port 0x100-0x3af, port 0x3e0-0x4ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
# High port numbers do not always work...
# include port 0x1000-0x17ff
# Extra port range for IBM Token Ring
include port 0xa00-0xaff
# Resources we should not use, even if they appear to be available
# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
#----------------------------------------------------------------------
# Examples of options for loadable modules
# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"
# Options for IBM Token Ring adapters
#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"
# Options for Raylink/WebGear driver: uncomment only one line...
# These are the default settings for use with the WebGear Windows driver:
#module "ray_cs" opts "essid=NETWORK_NAME hop_dwell=128 beacon_period=256 translate=0"
# Generic ad-hoc network
#module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1"
# Infrastructure network for older cards
#module "ray_cs" opts "net_type=1 essid=ESSID1"
# Infrastructure network for WebGear
#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256"
# Options for WaveLAN/IEEE driver (AccessPoint mode)...
#module "wvlan_cs" opts "station_name=MY_PC"
# Options for WaveLAN/IEEE driver (ad-hoc mode)...
#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"
# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"
|
