path: root/source/a/pkgtools/scripts/upgradepkg

#!/bin/bash
# Copyright 1999  Patrick Volkerding, Moorhead, Minnesota, USA 
# Copyright 2001, 2002, 2003  Slackware Linux, Inc., Concord, California, USA
# Copyright 2009, 2015  Patrick J. Volkerding, Sebeka, MN, USA
# Copyright 2015  Michal Nazarewicz <mina86@mina86.com>
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Modified to handle either old 8.3 or new package-version-arch-build.tgz
# packages, Sat Nov 17 14:25:58 PST 2001 volkerdi
#
# Rewritten to clean out _all_ old packages of a given basename, not just
# the first one found, Thu Apr  4 01:01:05 PST 2002 volkerdi
#
# Added --install-new and --reinstall, Fri May 31 14:11:14 PDT 2002 volkerdi
# Added --dry-run, Sat Apr 26 18:13:29 PDT 2003
#
# Sat Apr 25 21:18:53 UTC 2009
# Support new compression types and package extensions.
# Converted to use new pkgbase() function to remove pathname and
# valid package extensions.
#
# Sat 17 Jan 16:21:32 UTC 2015  mina86
# Various optimisation mostly resolving around avoiding having to fork
# and call cut, basename and other helper commands.  Slight
# refactoring of code calling removepkg.

# Return a package name that has been stripped of the dirname portion
# and any of the valid extensions (only):
pkgbase() {
  PKGRETURN=${1##*/}
  case "$PKGRETURN" in *.t[gblx]z)
    PKGRETURN=${PKGRETURN%.*}
  esac
  echo "$PKGRETURN"
}

usage() {
 cat << EOF

Usage: upgradepkg newpackage [newpackage2 ... ]
       upgradepkg oldpackage%newpackage [oldpackage2%newpackage2 ... ]

Upgradepkg upgrades a Slackware package (.tgz, .tbz, .tlz, .txz) from an
older version to a newer one.  It does this by INSTALLING the new package
onto the system, and then REMOVING any files from the old package that
aren't in the new package.  If the old and new packages have the same
name, a single argument is all that is required.  If the packages have
different names, supply the name of the old package followed by a percent
symbol (%), then the name of the new package.  Do not add any extra
whitespace between pairs of old/new package names.

Before upgrading a package, save any configuration files (such as in /etc)
that you wish to keep.  Sometimes these will be preserved, but it depends
on the package.  If you want to force new versions of the config files
to be installed, remove the old ones manually prior to running upgradepkg.

To upgrade in a directory other than / (such as /mnt):  

   ROOT=/mnt upgradepkg package.tgz (or .tbz, .tlz, .txz)

EOF
}

# Make sure there's a proper temp directory:
TMP=$ROOT/var/log/setup/tmp
# If the $TMP directory doesn't exist, create it:
if [ ! -d $TMP ]; then
  rm -rf $TMP # make sure it's not a symlink or something stupid
  mkdir $TMP
  chmod 700 $TMP # no need to leave it open
fi

# This script expects an 022 umask:
umask 022

# $ROOT defined?
if [ -d "$ROOT" ]; then
  export ROOT
else
  unset ROOT
fi

# --help or no args?
if [ "$1" = "" -o "$1" = "--help" -o "$1" = "-?" ]; then
  usage;
  exit 1;
fi

# Arg processing loop.  These must come before any packages are listed.
while [ 0 ]; do
  if [ "$1" = "--no-paranoia" ]; then
    # Enable --no-paranoia mode.  This is so not-recommended that we're
    # not even going to document it. ;)   If a file used to be directly
    # managed and now is moved into place, using --no-paranoia will cause
    # it to improperly disappear.  It does slightly speed things up, though.
    # Don't use it.
    NOT_PARANOID="true"
    shift 1
  elif [ "$1" = "--install-new" ]; then
    # Install packages that do not already have an installed version.
    # The usual default is to skip them.
    INSTALL_NEW="yes"
    shift 1
  elif [ "$1" = "--reinstall" ]; then
    # Reinstall packages even if the installed one is the same version.
    REINSTALL="true"
    shift 1
  elif [ "$1" = "--verbose" -o "$1" = "-v" ]; then
    # We're adding a --verbose mode that doesn't filter removepkg as much
    VERBOSE="verbose"
    shift 1
  elif [ "$1" = "--dry-run" ]; then
    # Output a report about which packages would be installed or upgraded
    # but don't actually perform the upgrades.
    DRY_RUN="true"
    shift 1
  else # no more args
    break;
  fi
done # processing args

# Here's a function to figure out the package name from one of those
# new long filenames.  We'll need this to double check the name of the
# old package.

package_name() {
  STRING=$(pkgbase "$1")
  case "$STRING" in
  *-*-*-*)
    # At least four segments, strip version arch and build and return name:
    echo "${STRING%-*-*-*}"
    # cruft for later ;)
    # BUILD=${STRING##*-}
    # STRING=${STRING%*-}
    # ARCH=${STRING##*-}
    # STRING=${STRING%*-}
    # VER=${STRING%*-}
    ;;
  *)
    # Old style package name with one segment or we don't have four
    # segments: return the old-style (or out of spec) package name.
    echo $STRING
  esac
}

ERRCODE=0

# Main processing loop:
for ARG; do
  OLD=${ARG%'%'*}  # first segment, = $ARG if no %
  NEW=${ARG#*'%'}  # second segment, = $ARG if no %

  # Simple package integrity check:
  if ! [ -f "$NEW" ]; then
    ERRCODE=4
    echo "Cannot install $ARG:  file not found"
    continue;
  fi

  # Figure out the names of the old and new packages:
  INCOMINGDIR=$(dirname $NEW)
  # These are the package names with the extension:
  NNAME=${NEW##*/}
  ONAME=${OLD##*/}
  # These are the package names without the extension:
  OLD=$(pkgbase $OLD)
  NEW=$(pkgbase $NEW)

  # Make sure the extension is valid:
  if [ "$NNAME" = "$NEW" ]; then
    # We won't throw an ERRCODE for this, but the package is skipped:
    echo "Cannot install $OLD:  invalid package extension"
    continue;
  fi

  # Check and fix the old package name:
  SHORT="$(package_name $OLD)"
  if [ ! -r $ROOT/var/log/packages/$OLD ]; then
    if ls $ROOT/var/log/packages/$SHORT* 1> /dev/null 2> /dev/null ; then
      for installed_package in $ROOT/var/log/packages/$SHORT* ; do
        if [ "$(package_name $installed_package)" = "$SHORT" ]; then # found one
          OLD="${installed_package##*/}"
          break
        fi
      done
    fi
  fi

  # Test to see if both the old and new packages are where we expect them
  # to be -- skip to the next package (or package pair) if anything's wrong:

  if [ ! -r $ROOT/var/log/packages/$OLD ]; then
    if [ ! "$INSTALL_NEW" = "yes" ]; then
      if [ "$DRY_RUN" = "true" ]; then
        echo "$OLD would not be upgraded (no installed package named $SHORT)."
      else
        echo
        echo "Error:  there is no installed package named $OLD."
        echo "        (looking for $ROOT/var/log/packages/$OLD)"
        echo
      fi
      ERRCODE=1
    else # --install-new was given, so install the new package:
      if [ "$DRY_RUN" = "true" ]; then
        echo "$NEW would be installed (new package)."
      else
        cat << EOF

+==============================================================================
| Installing new package $INCOMINGDIR/$NNAME
+==============================================================================

EOF
        /sbin/installpkg $INCOMINGDIR/$NNAME
      fi
    fi
    continue;
  elif [ ! -r "$INCOMINGDIR/$NNAME" ]; then
    if [ "$DRY_RUN" = "true" ]; then
      echo "$NEW incoming package not found (command line)."
    else
      echo
      echo "Error:  incoming package $INCOMINGDIR/$NNAME not found."
      echo
    fi
    ERRCODE=1
    continue;
  fi

  # Unless --reinstall was given, compare the package names
  # and skip any exact matches:
  if [ ! "$REINSTALL" = "true" ]; then
    if [ "$OLD" = "$NEW" ]; then
      if [ "$DRY_RUN" = "true" ]; then
        echo "$NEW would be skipped (already installed)."
      else
        cat << EOF

+==============================================================================
| Skipping package $NEW (already installed)
+==============================================================================

EOF
      fi
      continue;
    fi
  fi

  # Showtime.  Let's do the upgrade.  First, we will rename all the
  # installed packages with this basename to make them easy to remove later:

  TIMESTAMP=$(date +%Y-%m-%d,%T)
  SHORT="$(package_name $OLD)"
  if [ "$DRY_RUN" = "true" ]; then
    echo -n "$NEW would upgrade: "
    for installed_package in $ROOT/var/log/packages/$SHORT* ; do
    if [ "$(package_name $installed_package)" = "$SHORT" ]; then
      echo -n "$(pkgbase $installed_package)"
    fi
    done
    echo
    continue
  fi
  for installed_package in $ROOT/var/log/packages/$SHORT* ; do
    if [ "$(package_name $installed_package)" = "$SHORT" ]; then
      mv $installed_package ${installed_package}-upgraded-$TIMESTAMP
    fi
  done
  for installed_script in $ROOT/var/log/scripts/$SHORT* ; do
    if [ "$(package_name $installed_script)" = "$SHORT" ]; then
      if [ -r $installed_script ]; then
        mv $installed_script ${installed_script}-upgraded-$TIMESTAMP
      fi
    fi
  done

  # Print a banner for the current upgrade:
  cat << EOF

+==============================================================================
| Upgrading $OLD package using $INCOMINGDIR/$NNAME
+==============================================================================

EOF

  # Next, the new package is pre-installed:
  if [ "$VERBOSE" = "verbose" ]; then
    /sbin/installpkg $INCOMINGDIR/$NNAME
    RETCODE=$?
  else
    echo "Pre-installing package $NEW..."
    /sbin/installpkg $INCOMINGDIR/$NNAME 1> /dev/null
    RETCODE=$?
  fi
  # Make sure that worked:
  if [ ! $RETCODE = 0 ]; then
    echo "ERROR:  Package $INCOMINGDIR/$NNAME did not install"
    echo "correctly.  You may need to reinstall your old package"
    echo "to avoid problems.  Make sure the new package is not"
    echo "corrupted."
    sleep 30
    # Skip this package, but still try to proceed.  Good luck...
    continue;
  fi

  # Now, the leftovers from the old package(s) can go.  Pretty simple, huh? :)
  for rempkg in "$ROOT/var/log/packages/"*"-$TIMESTAMP"; do
    if [ "$VERBOSE" = "verbose" ]; then
      /sbin/removepkg "${rempkg##*/}"
    else
      /sbin/removepkg "${rempkg##*/}" | grep -v 'Skipping\.\|Removing files:'
    fi
  done
  echo

  # Again!  Again!
  # Seriously, the reinstalling of a package can be crucial if any files
  # shift location, so we should always reinstall as the final step:
  if [ ! "$NOT_PARANOID" = "true" ]; then
    /sbin/installpkg $INCOMINGDIR/$NNAME
  fi

  echo "Package $OLD upgraded with new package $INCOMINGDIR/$NNAME."
  ERRCODE=0
done

if [ ! "$DRY_RUN" = "true" ]; then
  echo
fi
exit $ERRCODE