diff options
Diffstat (limited to 'testing')
34 files changed, 6592 insertions, 0 deletions
diff --git a/testing/packages/linux-2.6.30.5/README_FIRST.TXT b/testing/packages/linux-2.6.30.5/README_FIRST.TXT new file mode 100644 index 00000000..86fa47b5 --- /dev/null +++ b/testing/packages/linux-2.6.30.5/README_FIRST.TXT @@ -0,0 +1,93 @@ + +Here are a set of 2.6.30.5 Linux kernel packages available for testing +with Slackware 13.0. These are not supported kernels, and we would +recommend that most users stick with the 2.6.29.6 kernels unless they +have a reason to use the newer kernel. A possible reason might be if +a system has some hardware that is better supported by the latest +kernel, such as certain recent wifi and video drivers. + +That said, we hope these kernel packages are helpful. + +To use these packages, install them with installpkg: + +installpkg kernel-*.txz + +Then, use mkinitrd to make an initial ramdisk. Use appropriate settings +for the kernel, filesystem module and type, and root device. Here's an +example for the i686 generic kernel using ext4 on root device /dev/sda2: + +mkinitrd -k 2.6.30.5-smp -m ext4 -f ext4 -r /dev/sda2 + +Here's an example using the x86_64 generic kernel and ext4 on /dev/sda2: + +mkinitrd -k 2.6.30.5 -m ext4 -f ext4 -r /dev/sda2 + +Now, you'll need to edit your /etc/lilo.conf. + +************** +* IMPORTANT! * +************** + +Due to the size of the 2.6.30.5 kernel and initrd, many BIOSes cannot boot +the kernel/ramdisk combination for i686, and most (if not all) will have +problems with the x86_64 kernel/ramdisk unless this option is added to the +/etc/lilo.conf: + +large-memory + +This allows LILO to use more than the first 15MB of RAM. LILO does not use +this option by default since it doesn't work with some older systems (BIOSes +from before around 2001). LILO tries to detect the amount of space that will +be required to decompress the kernel, but some adjustment to the code is +going to be needed, or perhaps we will have to investigate alternatives for +the bootloader. In any case, that's something for Slackware 13.1 or 14.0, or +whatever happens down the line. + +The option can go into the lilo.conf global section. It actually works just +fine to make it the first uncommented line of the file. + +************** + +Editing the /etc/lilo.conf file: + +With the large-memory option added to the file as described above, the next +step is to add a section to boot the new kernel and initrd. It's probably +a good idea to leave the section that boots the existing kernel in place at +first. + +An example for the 2.6.30.5-smp i686 kernel might look like this, added to +the bottom of /etc/lilo.conf: + +# Linux bootable partition config begins +image = /boot/vmlinuz-generic-smp-2.6.30.5-smp + initrd = /boot/initrd.gz + root = /dev/sda2 + label = L26305 + read-only +# Linux bootable partition config ends + +This uses the same configuration as the mkinitrd example for i686 above -- +adjust it to suit your needs. + +Once you've edited /etc/lilo.conf to add a boot section for the new kernel +and the large-memory option, you're ready to reinstall LILO. As root, +issue the "lilo" command. You should see output similar to this: + +# lilo +Warning: LBA32 addressing assumed +Added Linux * +Added Windows +Added L26305 +One warning was issued. + +If you get an error (not just a warning), you'll need to figure out how to +correct that and install LILO again BEFORE you try to reboot the machine! +Otherwise the machine may not reboot, and you'll need to use bootable media +to rescue it. + +Once LILO is installed without errors (warnings are probably OK), you may +reboot the machine and select the menu option for the new kernel. If all +goes well, your machine will start up running the 2.6.30.5 kernel. + +Hope this helps, and have fun. :-) + diff --git a/testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt new file mode 100644 index 00000000..8a2d40cc --- /dev/null +++ b/testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt @@ -0,0 +1,11 @@ +kernel-firmware: kernel-firmware (Firmware installed by the kernel) +kernel-firmware: +kernel-firmware: These are the firmware files from the Linux kernel. +kernel-firmware: +kernel-firmware: You'll need these to use certain hardware with Linux. +kernel-firmware: +kernel-firmware: +kernel-firmware: +kernel-firmware: +kernel-firmware: +kernel-firmware: diff --git a/testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt new file mode 100644 index 00000000..b99e5509 --- /dev/null +++ b/testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt @@ -0,0 +1,11 @@ +kernel-generic: kernel-generic (a general purpose SMP Linux kernel) +kernel-generic: +kernel-generic: This is a Linux kernel with built-in support for most disk +kernel-generic: controllers. To use filesystems, or to load support for a SCSI or +kernel-generic: other controller, then you'll need to load one or more kernel +kernel-generic: modules using an initial ramdisk, or initrd. For more information +kernel-generic: about creating an initrd, see the README.initrd file in the /boot +kernel-generic: directory. +kernel-generic: +kernel-generic: SMP is "Symmetric multiprocessing", or multiple CPU/core support. +kernel-generic: diff --git a/testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt new file mode 100644 index 00000000..27b46a0e --- /dev/null +++ b/testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt @@ -0,0 +1,11 @@ +kernel-headers: kernel-headers (Linux kernel include files) +kernel-headers: +kernel-headers: These are the include files from the Linux kernel. +kernel-headers: +kernel-headers: You'll need these to compile most system software for Linux. +kernel-headers: +kernel-headers: +kernel-headers: +kernel-headers: +kernel-headers: +kernel-headers: diff --git a/testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt new file mode 100644 index 00000000..56067d43 --- /dev/null +++ b/testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt @@ -0,0 +1,11 @@ +kernel-modules: kernel-modules (Linux kernel modules) +kernel-modules: +kernel-modules: A kernel module is a piece of object code that can be dynamically +kernel-modules: loaded into the Linux kernel to provide new kernel functions. Most of +kernel-modules: these modules provide support for devices such as CD-ROM drives, tape +kernel-modules: drives, and ethernet cards. You can choose which modules to load by +kernel-modules: editing /etc/rc.d/rc.modules. +kernel-modules: +kernel-modules: +kernel-modules: +kernel-modules: diff --git a/testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt new file mode 100644 index 00000000..eb2b0a30 --- /dev/null +++ b/testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt @@ -0,0 +1,11 @@ +kernel-source: kernel-source (Linux kernel source) +kernel-source: +kernel-source: Source code for Linus Torvalds' Linux kernel. +kernel-source: +kernel-source: This is the complete and unmodified source code for the Linux kernel. +kernel-source: +kernel-source: +kernel-source: +kernel-source: +kernel-source: +kernel-source: diff --git a/testing/source/bash/bash-4.0-patches/bash40-001 b/testing/source/bash/bash-4.0-patches/bash40-001 new file mode 100644 index 00000000..5c6bb34b --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-001 @@ -0,0 +1,162 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-001 + +Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> +Bug-Reference-ID: <200902211821.42188.vapier@gentoo.org> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00147.html + +Bug-Description: + +Bash has problems parsing certain constructs inside Posix-style $(...) +command substitutions, mostly with backslash-quoting and reserved word +recognition. This is an issue because the contents are parsed at the +time the word containing the command substitution is read. + +Patch: + +*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 +--- parse.y 2009-03-06 20:32:35.000000000 -0500 +*************** +*** 2928,2931 **** +--- 2932,2936 ---- + #define LEX_HEREDELIM 0x100 /* reading here-doc delimiter */ + #define LEX_STRIPDOC 0x200 /* <<- strip tabs from here doc delim */ ++ #define LEX_INWORD 0x400 + + #define COMSUB_META(ch) ((ch) == ';' || (ch) == '&' || (ch) == '|') +*************** +*** 3180,3184 **** + int *lenp, flags; + { +! int count, ch, peekc, tflags, lex_rwlen, lex_firstind; + int nestlen, ttranslen, start_lineno; + char *ret, *nestret, *ttrans, *heredelim; +--- 3188,3192 ---- + int *lenp, flags; + { +! int count, ch, peekc, tflags, lex_rwlen, lex_wlen, lex_firstind; + int nestlen, ttranslen, start_lineno; + char *ret, *nestret, *ttrans, *heredelim; +*************** +*** 3201,3205 **** + + start_lineno = line_number; +! lex_rwlen = 0; + + heredelim = 0; +--- 3209,3213 ---- + + start_lineno = line_number; +! lex_rwlen = lex_wlen = 0; + + heredelim = 0; +*************** +*** 3268,3271 **** +--- 3276,3319 ---- + } + ++ if (tflags & LEX_PASSNEXT) /* last char was backslash */ ++ { ++ /*itrace("parse_comsub:%d: lex_passnext -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/ ++ tflags &= ~LEX_PASSNEXT; ++ if (qc != '\'' && ch == '\n') /* double-quoted \<newline> disappears. */ ++ { ++ if (retind > 0) ++ retind--; /* swallow previously-added backslash */ ++ continue; ++ } ++ ++ RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); ++ if MBTEST(ch == CTLESC || ch == CTLNUL) ++ ret[retind++] = CTLESC; ++ ret[retind++] = ch; ++ continue; ++ } ++ ++ /* If this is a shell break character, we are not in a word. If not, ++ we either start or continue a word. */ ++ if MBTEST(shellbreak (ch)) ++ { ++ tflags &= ~LEX_INWORD; ++ /*itrace("parse_comsub:%d: lex_inword -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/ ++ } ++ else ++ { ++ if (tflags & LEX_INWORD) ++ { ++ lex_wlen++; ++ /*itrace("parse_comsub:%d: lex_inword == 1 ch = `%c' lex_wlen = %d (%d)", line_number, ch, lex_wlen, __LINE__);*/ ++ } ++ else ++ { ++ /*itrace("parse_comsub:%d: lex_inword -> 1 ch = `%c' (%d)", line_number, ch, __LINE__);*/ ++ tflags |= LEX_INWORD; ++ lex_wlen = 0; ++ } ++ } ++ + /* Skip whitespace */ + if MBTEST(shellblank (ch) && lex_rwlen == 0) +*************** +*** 3400,3428 **** + } + else +! ch = peekc; /* fall through and continue XXX - this skips comments if peekc == '#' */ + } +! /* Not exactly right yet, should handle shell metacharacters, too. If +! any changes are made to this test, make analogous changes to subst.c: +! extract_delimited_string(). */ +! else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (retind == 0 || ret[retind-1] == '\n' || shellblank (ret[retind - 1]))) + tflags |= LEX_INCOMMENT; + +! if (tflags & LEX_PASSNEXT) /* last char was backslash */ +! { +! tflags &= ~LEX_PASSNEXT; +! if (qc != '\'' && ch == '\n') /* double-quoted \<newline> disappears. */ +! { +! if (retind > 0) +! retind--; /* swallow previously-added backslash */ +! continue; +! } +! +! RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); +! if MBTEST(ch == CTLESC || ch == CTLNUL) +! ret[retind++] = CTLESC; +! ret[retind++] = ch; +! continue; +! } +! else if MBTEST(ch == CTLESC || ch == CTLNUL) /* special shell escapes */ + { + RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); +--- 3442,3454 ---- + } + else +! ch = peekc; /* fall through and continue XXX */ + } +! else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (((tflags & LEX_RESWDOK) && lex_rwlen == 0) || ((tflags & LEX_INWORD) && lex_wlen == 0))) +! { +! /*itrace("parse_comsub:%d: lex_incomment -> 1 (%d)", line_number, __LINE__);*/ + tflags |= LEX_INCOMMENT; ++ } + +! if MBTEST(ch == CTLESC || ch == CTLNUL) /* special shell escapes */ + { + RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 0 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 1 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-002 b/testing/source/bash/bash-4.0-patches/bash40-002 new file mode 100644 index 00000000..18bd25e7 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-002 @@ -0,0 +1,43 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-002 + +Bug-Reported-by: phil@Arcturus.universe +Bug-Reference-ID: <20090221143709.13878.qmail@Arcturus.universe> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00142.html + +Bug-Description: + +A line inadvertenly omitted from a submitted patch results in core dumps +when attempting filename completion while using the bash-completion +package. + +Patch: + +*** ../bash-4.0/pcomplete.c 2009-02-01 17:12:31.000000000 -0500 +--- pcomplete.c 2009-02-22 17:08:25.000000000 -0500 +*************** +*** 1033,1036 **** +--- 1033,1037 ---- + + pps = &ps; ++ save_parser_state (pps); + begin_unwind_frame ("gen-shell-function-matches"); + add_unwind_protect (restore_parser_state, (char *)pps); +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 1 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 2 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-003 b/testing/source/bash/bash-4.0-patches/bash40-003 new file mode 100644 index 00000000..cc941d5e --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-003 @@ -0,0 +1,70 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-003 + +Bug-Reported-by: Bernd Eggink <monoped@sudrala.de> +Bug-Reference-ID: <49A323F5.60503@sudrala.de> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00177.html + +Bug-Description: + +Under certain circumstances, constructs containing command substitutions +prevent PS1 from being re-evaluated and updated before being displayed. + +Patch: + +*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 +--- parse.y 2009-02-25 15:58:25.000000000 -0500 +*************** +*** 1616,1623 **** + int *ret; + +! ret = (int *)xmalloc (3 * sizeof (int)); + ret[0] = last_read_token; + ret[1] = token_before_that; + ret[2] = two_tokens_ago; + return ret; + } +--- 1616,1624 ---- + int *ret; + +! ret = (int *)xmalloc (4 * sizeof (int)); + ret[0] = last_read_token; + ret[1] = token_before_that; + ret[2] = two_tokens_ago; ++ ret[3] = current_token; + return ret; + } +*************** +*** 1632,1635 **** +--- 1633,1637 ---- + token_before_that = ts[1]; + two_tokens_ago = ts[2]; ++ current_token = ts[3]; + } + +*************** +*** 2669,2672 **** +--- 2671,2675 ---- + word_desc_to_read = (WORD_DESC *)NULL; + ++ current_token = '\n'; /* XXX */ + last_read_token = '\n'; + token_to_read = '\n'; +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 2 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 3 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-004 b/testing/source/bash/bash-4.0-patches/bash40-004 new file mode 100644 index 00000000..6ab6c4ee --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-004 @@ -0,0 +1,47 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-004 + +Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> +Bug-Reference-ID: <200902231720.30519.vapier@gentoo.org> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00176.html + +Bug-Description: + +In some cases, enabling the `checkjobs' shell option will cause the shell +to core dump when executing the `exit' builtin. + +Patch: + +*** ../bash-4.0/builtins/exit.def 2009-01-04 14:32:22.000000000 -0500 +--- builtins/exit.def 2009-02-23 22:56:58.000000000 -0500 +*************** +*** 114,118 **** + if (jobs[i] && STOPPED (i)) + stopmsg = JSTOPPED; +! else if (check_jobs_at_exit && stopmsg == 0 && RUNNING (i)) + stopmsg = JRUNNING; + +--- 114,118 ---- + if (jobs[i] && STOPPED (i)) + stopmsg = JSTOPPED; +! else if (check_jobs_at_exit && stopmsg == 0 && jobs[i] && RUNNING (i)) + stopmsg = JRUNNING; + +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 3 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 4 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-005 b/testing/source/bash/bash-4.0-patches/bash40-005 new file mode 100644 index 00000000..ccfde66d --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-005 @@ -0,0 +1,63 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-005 + +Bug-Reported-by: Pierre Gaston <pierre.gaston@gmail.com> +Bug-Reference-ID: <c440c9800902242338n69f594a4nd66b8748def9cf18@mail.gmail.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00206.html + +Bug-Description: + +The `declare' builtin dumped core when attempting to assign associative +array indices containing some special characters, even when they were +quoted before being expanded. + +Patch: + +*** ../bash-4.0/builtins/declare.def 2009-01-04 14:32:22.000000000 -0500 +--- builtins/declare.def 2009-02-26 11:40:16.000000000 -0500 +*************** +*** 296,299 **** +--- 296,306 ---- + if (t = strchr (name, '[')) /* ] */ + { ++ /* If offset != 0 we have already validated any array reference */ ++ if (offset == 0 && valid_array_reference (name) == 0) ++ { ++ sh_invalidid (name); ++ assign_error++; ++ NEXT_VARIABLE (); ++ } + subscript_start = t; + *t = '\0'; +*************** +*** 485,489 **** + /* declare -a name[[n]] or declare name[n] makes name an indexed + array variable. */ +! else if ((making_array_special || (flags_on & att_array)) && array_p (var) == 0) + var = convert_var_to_array (var); + #endif /* ARRAY_VARS */ +--- 492,496 ---- + /* declare -a name[[n]] or declare name[n] makes name an indexed + array variable. */ +! else if ((making_array_special || (flags_on & att_array)) && array_p (var) == 0 && assoc_p (var) == 0) + var = convert_var_to_array (var); + #endif /* ARRAY_VARS */ +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 4 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 5 + + #endif /* _PATCHLEVEL_H_ */ + diff --git a/testing/source/bash/bash-4.0-patches/bash40-006 b/testing/source/bash/bash-4.0-patches/bash40-006 new file mode 100644 index 00000000..3d044c72 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-006 @@ -0,0 +1,43 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-006 + +Bug-Reported-by: Evgeniy Zhemchugov <jini.zh@gmail.com> +Bug-Reference-ID: <e7bc8dd30902241016m8bd543ej775717d007df975b@mail.gmail.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00202.html + +Bug-Description: + +Bash did not parse pipelines using the |& construct correctly if the +pipeline elements were not simple commands. + +Patch: + +*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 +--- parse.y 2009-02-25 17:25:56.000000000 -0500 +*************** +*** 4478,4481 **** +--- 4478,4482 ---- + case AND_AND: + case BANG: ++ case BAR_AND: + case DO: + case DONE: +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 5 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 6 + + #endif /* _PATCHLEVEL_H_ */ + diff --git a/testing/source/bash/bash-4.0-patches/bash40-007 b/testing/source/bash/bash-4.0-patches/bash40-007 new file mode 100644 index 00000000..29071e12 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-007 @@ -0,0 +1,263 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-007 + +Bug-Reported-by: AnMaster <anmaster@tele2.se> +Bug-Reference-ID: <49A41C18.80807@tele2.se> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00188.html + +Bug-Description: + +Bash had a number of problems parsing associative array subscripts containing +special characters. The subscripts are supposed to be read as if they are +enclosed between double quotes. + +Patch: + +*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 +--- parse.y 2009-02-25 17:25:56.000000000 -0500 +*************** +*** 2919,2922 **** +--- 2919,2923 ---- + #define P_COMMAND 0x08 /* parsing a command, so look for comments */ + #define P_BACKQUOTE 0x10 /* parsing a backquoted command substitution */ ++ #define P_ARRAYSUB 0x20 /* parsing a [...] array subscript for assignment */ + + /* Lexical state while parsing a grouping construct or $(...). */ +*************** +*** 3134,3137 **** +--- 3134,3139 ---- + FREE (nestret); + } ++ else if ((flags & P_ARRAYSUB) && (tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '[')) /* ) } ] */ ++ goto parse_dollar_word; + } + /* Parse an old-style command substitution within double quotes as a +*************** +*** 3150,3153 **** +--- 3150,3154 ---- + /* check for $(), $[], or ${} inside quoted string. */ + { ++ parse_dollar_word: + if (open == ch) /* undo previous increment */ + count--; +*************** +*** 4277,4281 **** + (token_index == 0 && (parser_state&PST_COMPASSIGN)))) + { +! ttok = parse_matched_pair (cd, '[', ']', &ttoklen, 0); + if (ttok == &matched_pair_error) + return -1; /* Bail immediately. */ +--- 4277,4281 ---- + (token_index == 0 && (parser_state&PST_COMPASSIGN)))) + { +! ttok = parse_matched_pair (cd, '[', ']', &ttoklen, P_ARRAYSUB); + if (ttok == &matched_pair_error) + return -1; /* Bail immediately. */ +*** ../bash-4.0/arrayfunc.c 2009-01-04 14:32:21.000000000 -0500 +--- arrayfunc.c 2009-02-25 07:58:54.000000000 -0500 +*************** +*** 605,666 **** + } + +! /* This function assumes s[i] == '['; returns with s[ret] == ']' if +! an array subscript is correctly parsed. */ +! int +! skipsubscript (s, i) +! const char *s; +! int i; +! { +! int count, c; +! #if defined (HANDLE_MULTIBYTE) +! mbstate_t state, state_bak; +! size_t slength, mblength; +! #endif +! +! #if defined (HANDLE_MULTIBYTE) +! memset (&state, '\0', sizeof (mbstate_t)); +! slength = strlen (s + i); +! #endif +! +! count = 1; +! while (count) +! { +! /* Advance one (possibly multibyte) character in S starting at I. */ +! #if defined (HANDLE_MULTIBYTE) +! if (MB_CUR_MAX > 1) +! { +! state_bak = state; +! mblength = mbrlen (s + i, slength, &state); +! +! if (MB_INVALIDCH (mblength)) +! { +! state = state_bak; +! i++; +! slength--; +! } +! else if (MB_NULLWCH (mblength)) +! return i; +! else +! { +! i += mblength; +! slength -= mblength; +! } +! } +! else +! #endif +! ++i; +! +! c = s[i]; +! +! if (c == 0) +! break; +! else if (c == '[') +! count++; +! else if (c == ']') +! count--; +! } +! +! return i; +! } + + /* This function is called with SUB pointing to just after the beginning +--- 605,609 ---- + } + +! /* skipsubscript moved to subst.c to use private functions. 2009/02/24. */ + + /* This function is called with SUB pointing to just after the beginning +*** ../bash-4.0/subst.c 2009-01-28 14:34:12.000000000 -0500 +--- subst.c 2009-02-25 09:18:33.000000000 -0500 +*************** +*** 223,226 **** +--- 223,227 ---- + static char *extract_delimited_string __P((char *, int *, char *, char *, char *, int)); + static char *extract_dollar_brace_string __P((char *, int *, int, int)); ++ static int skip_matched_pair __P((const char *, int, int, int, int)); + + static char *pos_params __P((char *, int, int, int)); +*************** +*** 1375,1378 **** +--- 1376,1480 ---- + #define CQ_RETURN(x) do { no_longjmp_on_fatal_error = 0; return (x); } while (0) + ++ /* This function assumes s[i] == open; returns with s[ret] == close; used to ++ parse array subscripts. FLAGS currently unused. */ ++ static int ++ skip_matched_pair (string, start, open, close, flags) ++ const char *string; ++ int start, open, close, flags; ++ { ++ int i, pass_next, backq, si, c, count; ++ size_t slen; ++ char *temp, *ss; ++ DECLARE_MBSTATE; ++ ++ slen = strlen (string + start) + start; ++ no_longjmp_on_fatal_error = 1; ++ ++ i = start + 1; /* skip over leading bracket */ ++ count = 1; ++ pass_next = backq = 0; ++ ss = (char *)string; ++ while (c = string[i]) ++ { ++ if (pass_next) ++ { ++ pass_next = 0; ++ if (c == 0) ++ CQ_RETURN(i); ++ ADVANCE_CHAR (string, slen, i); ++ continue; ++ } ++ else if (c == '\\') ++ { ++ pass_next = 1; ++ i++; ++ continue; ++ } ++ else if (backq) ++ { ++ if (c == '`') ++ backq = 0; ++ ADVANCE_CHAR (string, slen, i); ++ continue; ++ } ++ else if (c == '`') ++ { ++ backq = 1; ++ i++; ++ continue; ++ } ++ else if (c == open) ++ { ++ count++; ++ i++; ++ continue; ++ } ++ else if (c == close) ++ { ++ count--; ++ if (count == 0) ++ break; ++ i++; ++ continue; ++ } ++ else if (c == '\'' || c == '"') ++ { ++ i = (c == '\'') ? skip_single_quoted (ss, slen, ++i) ++ : skip_double_quoted (ss, slen, ++i); ++ /* no increment, the skip functions increment past the closing quote. */ ++ } ++ else if (c == '$' && (string[i+1] == LPAREN || string[i+1] == LBRACE)) ++ { ++ si = i + 2; ++ if (string[si] == '\0') ++ CQ_RETURN(si); ++ ++ if (string[i+1] == LPAREN) ++ temp = extract_delimited_string (ss, &si, "$(", "(", ")", SX_NOALLOC|SX_COMMAND); /* ) */ ++ else ++ temp = extract_dollar_brace_string (ss, &si, 0, SX_NOALLOC); ++ i = si; ++ if (string[i] == '\0') /* don't increment i past EOS in loop */ ++ break; ++ i++; ++ continue; ++ } ++ else ++ ADVANCE_CHAR (string, slen, i); ++ } ++ ++ CQ_RETURN(i); ++ } ++ ++ #if defined (ARRAY_VARS) ++ int ++ skipsubscript (string, start) ++ const char *string; ++ int start; ++ { ++ return (skip_matched_pair (string, start, '[', ']', 0)); ++ } ++ #endif ++ + /* Skip characters in STRING until we find a character in DELIMS, and return + the index of that character. START is the index into string at which we +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 6 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 7 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-008 b/testing/source/bash/bash-4.0-patches/bash40-008 new file mode 100644 index 00000000..7a2576aa --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-008 @@ -0,0 +1,49 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-008 + +Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> +Bug-Reference-ID: <200902261030.54062.vapier@gentoo.org> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00230.html + +Bug-Description: + +Patch: + +*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 +--- parse.y 2009-02-26 17:22:15.000000000 -0500 +*************** +*** 3443,3448 **** + else + shell_ungetc (peekc); +! tflags |= LEX_HEREDELIM; +! lex_firstind = -1; + continue; + } +--- 3443,3451 ---- + else + shell_ungetc (peekc); +! if (peekc != '<') +! { +! tflags |= LEX_HEREDELIM; +! lex_firstind = -1; +! } + continue; + } +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 7 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 8 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-009 b/testing/source/bash/bash-4.0-patches/bash40-009 new file mode 100644 index 00000000..f5839192 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-009 @@ -0,0 +1,61 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-009 + +Bug-Reported-by: "Chris F.A. Johnson" <cfajohnson@gmail.com> +Bug-Reference-ID: <4d6b7$49a88cec$cef88ba3$16813@TEKSAVVY.COM> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00255.html + +Bug-Description: + +When the read builtin returned due to a timeout supplied with the -t option, +it did not restore any modified terminal attribtues. + +Patch: + +*** ../bash-4.0/builtins/read.def 2009-01-15 23:11:21.000000000 -0500 +--- builtins/read.def 2009-03-02 10:15:39.000000000 -0500 +*************** +*** 370,381 **** + if (code) + { +! #if 0 + run_unwind_frame ("read_builtin"); +- return (EXECUTION_FAILURE); +- #else + input_string[i] = '\0'; /* make sure it's terminated */ +! retval = 128+SIGALRM;; + goto assign_vars; +- #endif + } + old_alrm = set_signal_handler (SIGALRM, sigalrm); +--- 370,381 ---- + if (code) + { +! /* Tricky. The top of the unwind-protect stack is the free of +! input_string. We want to run all the rest and use input_string, +! so we have to remove it from the stack. */ +! remove_unwind_protect (); + run_unwind_frame ("read_builtin"); + input_string[i] = '\0'; /* make sure it's terminated */ +! retval = 128+SIGALRM; + goto assign_vars; + } + old_alrm = set_signal_handler (SIGALRM, sigalrm); +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 8 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 9 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-010 b/testing/source/bash/bash-4.0-patches/bash40-010 new file mode 100644 index 00000000..3229c573 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-010 @@ -0,0 +1,63 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-010 + +Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> +Bug-Reference-ID: <200903030122.56206.vapier@gentoo.org> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00023.html + +Bug-Description: + +Bash has problems parsing comments in case statements when they appear in +$(...) subshells. + +Patch: + +*** ../bash-4.0/parse.y 2009-03-07 15:18:35.000000000 -0500 +--- parse.y 2009-03-07 14:16:32.000000000 -0500 +*************** +*** 3413,3419 **** + tflags &= ~LEX_RESWDOK; + } +! else if (shellbreak (ch) == 0) + { +! tflags &= ~LEX_RESWDOK; + /*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/ + } +--- 3415,3433 ---- + tflags &= ~LEX_RESWDOK; + } +! else if MBTEST((tflags & LEX_CKCOMMENT) && ch == '#' && (lex_rwlen == 0 || ((tflags & LEX_INWORD) && lex_wlen == 0))) +! ; /* don't modify LEX_RESWDOK if we're starting a comment */ +! else if MBTEST((tflags & LEX_INCASE) && ch != '\n') +! /* If we can read a reserved word and we're in case, we're at the +! point where we can read a new pattern list or an esac. We +! handle the esac case above. If we read a newline, we want to +! leave LEX_RESWDOK alone. If we read anything else, we want to +! turn off LEX_RESWDOK, since we're going to read a pattern list. */ + { +! tflags &= ~LEX_RESWDOK; +! /*itrace("parse_comsub:%d: lex_incase == 1 found `%c', lex_reswordok -> 0", line_number, ch);*/ +! } +! else if MBTEST(shellbreak (ch) == 0) +! { +! tflags &= ~LEX_RESWDOK; + /*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/ + } +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 9 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 10 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-011 b/testing/source/bash/bash-4.0-patches/bash40-011 new file mode 100644 index 00000000..61d1d3a8 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-011 @@ -0,0 +1,49 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-011 + +Bug-Reported-by: Matt Zyzik <Matt@ice.filescope.com>n +Bug-Reference-ID: <20090312015018.C00741383ED@ice.filescope.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00092.html + +Bug-Description: + +When using the new |& operator following a simple command with a redirection, +the redirection of stderr through the pipe was not performed under certain +circumstances. + +Patch: + +*** ../bash-4.0-patched/parse.y 2009-03-08 21:24:47.000000000 -0400 +--- parse.y 2009-03-12 21:36:23.000000000 -0400 +*************** +*** 1123,1127 **** + REDIRECT *r; + +! tc = $1; + rd.dest = 1; + r = make_redirection (2, r_duplicating_output, rd); +--- 1123,1127 ---- + REDIRECT *r; + +! tc = $1->type == cm_simple ? (COMMAND *)$1->value.Simple : $1; + rd.dest = 1; + r = make_redirection (2, r_duplicating_output, rd); +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 10 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 11 + + #endif /* _PATCHLEVEL_H_ */ + diff --git a/testing/source/bash/bash-4.0-patches/bash40-012 b/testing/source/bash/bash-4.0-patches/bash40-012 new file mode 100644 index 00000000..014eae69 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-012 @@ -0,0 +1,47 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-012 + +Bug-Reported-by: "Clark J. Wang" <dearvoid@gmail.com> +Bug-Reference-ID: <a96f63770903132300v7816dfb7hb7f48d46048bf3cb@mail.gmail.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00129.html + +Bug-Description: + +A case statement using the ;& pattern terminator followed immediately by +"esac" caused a core dump due to a null pointer dereference. + +Patch: + +*** ../bash-4.0-patched/execute_cmd.c 2009-02-13 16:41:41.000000000 -0500 +--- execute_cmd.c 2009-03-14 13:23:00.000000000 -0400 +*************** +*** 2931,2935 **** + } + while ((clauses->flags & CASEPAT_FALLTHROUGH) && (clauses = clauses->next)); +! if ((clauses->flags & CASEPAT_TESTNEXT) == 0) + EXIT_CASE (); + else +--- 2931,2935 ---- + } + while ((clauses->flags & CASEPAT_FALLTHROUGH) && (clauses = clauses->next)); +! if (clauses == 0 || (clauses->flags & CASEPAT_TESTNEXT) == 0) + EXIT_CASE (); + else +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 11 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 12 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-013 b/testing/source/bash/bash-4.0-patches/bash40-013 new file mode 100644 index 00000000..df1fc493 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-013 @@ -0,0 +1,153 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-013 + +Bug-Reported-by: jidanni@jidanni.org +Bug-Reference-ID: +Bug-Reference-URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=519165 + +Bug-Description: + +Though references to $@ when there are no positional parameters will now +cause the shell to exit if the `errexit' option has been enabled, constructs +such as ${@:-foo} should not cause an exit. + +Patch: + +*** ../bash-4.0-patched/subst.c 2009-03-08 21:24:39.000000000 -0400 +--- subst.c 2009-03-14 19:04:10.000000000 -0400 +*************** +*** 86,89 **** +--- 86,90 ---- + /* Flags for the `pflags' argument to param_expand() */ + #define PF_NOCOMSUB 0x01 /* Do not perform command substitution */ ++ #define PF_IGNUNBOUND 0x02 /* ignore unbound vars even if -u set */ + + /* These defs make it easier to use the editor. */ +*************** +*** 264,268 **** + static int chk_arithsub __P((const char *, int)); + +! static WORD_DESC *parameter_brace_expand_word __P((char *, int, int)); + static WORD_DESC *parameter_brace_expand_indir __P((char *, int, int, int *, int *)); + static WORD_DESC *parameter_brace_expand_rhs __P((char *, char *, int, int, int *, int *)); +--- 265,269 ---- + static int chk_arithsub __P((const char *, int)); + +! static WORD_DESC *parameter_brace_expand_word __P((char *, int, int, int)); + static WORD_DESC *parameter_brace_expand_indir __P((char *, int, int, int *, int *)); + static WORD_DESC *parameter_brace_expand_rhs __P((char *, char *, int, int, int *, int *)); +*************** +*** 5196,5202 **** + NAME was found inside of a double-quoted expression. */ + static WORD_DESC * +! parameter_brace_expand_word (name, var_is_special, quoted) + char *name; +! int var_is_special, quoted; + { + WORD_DESC *ret; +--- 5197,5203 ---- + NAME was found inside of a double-quoted expression. */ + static WORD_DESC * +! parameter_brace_expand_word (name, var_is_special, quoted, pflags) + char *name; +! int var_is_special, quoted, pflags; + { + WORD_DESC *ret; +*************** +*** 5230,5234 **** + + ret = param_expand (tt, &sindex, quoted, (int *)NULL, (int *)NULL, +! (int *)NULL, (int *)NULL, 0); + free (tt); + } +--- 5231,5235 ---- + + ret = param_expand (tt, &sindex, quoted, (int *)NULL, (int *)NULL, +! (int *)NULL, (int *)NULL, pflags); + free (tt); + } +*************** +*** 5291,5295 **** + WORD_DESC *w; + +! w = parameter_brace_expand_word (name, var_is_special, quoted); + t = w->word; + /* Have to dequote here if necessary */ +--- 5292,5296 ---- + WORD_DESC *w; + +! w = parameter_brace_expand_word (name, var_is_special, quoted, PF_IGNUNBOUND); + t = w->word; + /* Have to dequote here if necessary */ +*************** +*** 5308,5312 **** + return (WORD_DESC *)NULL; + +! w = parameter_brace_expand_word (t, SPECIAL_VAR(t, 0), quoted); + free (t); + +--- 5309,5313 ---- + return (WORD_DESC *)NULL; + +! w = parameter_brace_expand_word (t, SPECIAL_VAR(t, 0), quoted, 0); + free (t); + +*************** +*** 6659,6663 **** + tdesc = parameter_brace_expand_indir (name + 1, var_is_special, quoted, quoted_dollar_atp, contains_dollar_at); + else +! tdesc = parameter_brace_expand_word (name, var_is_special, quoted); + + if (tdesc) +--- 6660,6664 ---- + tdesc = parameter_brace_expand_indir (name + 1, var_is_special, quoted, quoted_dollar_atp, contains_dollar_at); + else +! tdesc = parameter_brace_expand_word (name, var_is_special, quoted, PF_IGNUNBOUND); + + if (tdesc) +*************** +*** 6990,6994 **** + list = list_rest_of_args (); + +! if (list == 0 && unbound_vars_is_error) + { + uerror[0] = '$'; +--- 6991,6995 ---- + list = list_rest_of_args (); + +! if (list == 0 && unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0) + { + uerror[0] = '$'; +*************** +*** 7052,7056 **** + list = list_rest_of_args (); + +! if (list == 0 && unbound_vars_is_error) + { + uerror[0] = '$'; +--- 7053,7057 ---- + list = list_rest_of_args (); + +! if (list == 0 && unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0) + { + uerror[0] = '$'; + + +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 12 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 13 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-014 b/testing/source/bash/bash-4.0-patches/bash40-014 new file mode 100644 index 00000000..eeba336c --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-014 @@ -0,0 +1,113 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-014 + +Bug-Reported-by: smallnow@gmail.com +Bug-Reference-ID: <49C460FE.40307@gmail.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00166.html + +Bug-Description: + +When the fc builtin is run in a command substitution from a shell with history +enabled, it does not correctly calculate the command on which to operate. + +Patch: + +*** ../bash-4.0-patched/builtins/fc.def 2009-01-04 14:32:22.000000000 -0500 +--- builtins/fc.def 2009-03-21 14:03:43.000000000 -0400 +*************** +*** 89,92 **** +--- 89,93 ---- + extern int literal_history; + extern int posixly_correct; ++ extern int subshell_environment, interactive_shell; + + extern int unlink __P((const char *)); +*************** +*** 173,177 **** + register char *sep; + int numbering, reverse, listing, execute; +! int histbeg, histend, last_hist, retval, opt; + FILE *stream; + REPL *rlist, *rl; +--- 174,178 ---- + register char *sep; + int numbering, reverse, listing, execute; +! int histbeg, histend, last_hist, retval, opt, rh; + FILE *stream; + REPL *rlist, *rl; +*************** +*** 276,279 **** +--- 277,282 ---- + fprintf (stderr, "%s\n", command); + fc_replhist (command); /* replace `fc -s' with command */ ++ /* Posix says that the re-executed commands should be entered into the ++ history. */ + return (parse_and_execute (command, "fc", SEVAL_NOHIST)); + } +*************** +*** 294,298 **** + so we check hist_last_line_added. */ + +! last_hist = i - remember_on_history - hist_last_line_added; + + if (list) +--- 297,306 ---- + so we check hist_last_line_added. */ + +! /* Even though command substitution through parse_and_execute turns off +! remember_on_history, command substitution in a shell when set -o history +! has been enabled (interactive or not) should use it in the last_hist +! calculation as if it were on. */ +! rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list); +! last_hist = i - rh - hist_last_line_added; + + if (list) +*************** +*** 457,461 **** + HIST_ENTRY **hlist; + { +! int sign, n, clen; + register int i, j; + register char *s; +--- 465,469 ---- + HIST_ENTRY **hlist; + { +! int sign, n, clen, rh; + register int i, j; + register char *s; +*************** +*** 473,477 **** + so we check hist_last_line_added. This needs to agree with the + calculation of last_hist in fc_builtin above. */ +! i -= remember_on_history + hist_last_line_added; + + /* No specification defaults to most recent command. */ +--- 481,490 ---- + so we check hist_last_line_added. This needs to agree with the + calculation of last_hist in fc_builtin above. */ +! /* Even though command substitution through parse_and_execute turns off +! remember_on_history, command substitution in a shell when set -o history +! has been enabled (interactive or not) should use it in the last_hist +! calculation as if it were on. */ +! rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list); +! i -= rh + hist_last_line_added; + + /* No specification defaults to most recent command. */ +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 13 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 14 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-015 b/testing/source/bash/bash-4.0-patches/bash40-015 new file mode 100644 index 00000000..c3e8d334 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-015 @@ -0,0 +1,84 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-015 + +Bug-Reported-by: Lubomir Rintel <lkundrak@v3.sk> +Bug-Reference-ID: <1237654931.32737.13.camel@localhost.localdomain> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00174.html + +Bug-Description: + +Deferring handling of signals which should cause the shell to terminate until +it is "safe" to run the handler functions does not work for some terminating +signals. + +Patch: + +*** ../bash-4.0-patched/sig.c 2009-01-04 14:32:41.000000000 -0500 +--- sig.c 2009-03-22 14:47:56.000000000 -0400 +*************** +*** 449,452 **** +--- 449,494 ---- + int sig; + { ++ /* If we get called twice with the same signal before handling it, ++ terminate right away. */ ++ if ( ++ #ifdef SIGHUP ++ sig != SIGHUP && ++ #endif ++ #ifdef SIGINT ++ sig != SIGINT && ++ #endif ++ #ifdef SIGDANGER ++ sig != SIGDANGER && ++ #endif ++ #ifdef SIGPIPE ++ sig != SIGPIPE && ++ #endif ++ #ifdef SIGALRM ++ sig != SIGALRM && ++ #endif ++ #ifdef SIGTERM ++ sig != SIGTERM && ++ #endif ++ #ifdef SIGXCPU ++ sig != SIGXCPU && ++ #endif ++ #ifdef SIGXFSZ ++ sig != SIGXFSZ && ++ #endif ++ #ifdef SIGVTALRM ++ sig != SIGVTALRM && ++ #endif ++ #ifdef SIGLOST ++ sig != SIGLOST && ++ #endif ++ #ifdef SIGUSR1 ++ sig != SIGUSR1 && ++ #endif ++ #ifdef SIGUSR2 ++ sig != SIGUSR2 && ++ #endif ++ sig == terminating_signal) ++ terminate_immediately = 1; ++ + terminating_signal = sig; + +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 14 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 15 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-016 b/testing/source/bash/bash-4.0-patches/bash40-016 new file mode 100644 index 00000000..ace2e1e5 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-016 @@ -0,0 +1,104 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-016 + +Bug-Reported-by: Brian J. Murrell" <brian@interlinx.bc.ca> +Bug-Reference-ID: <1237564627.7666.12.camel@pc.interlinx.bc.ca> +Bug-Reference-URL:http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00160.html + +Bug-Description: + +There are several problems with the handling of $LINENO in an ERR trap. + +Patch: + +*** ../bash-4.0-patched/trap.c 2009-01-16 17:07:53.000000000 -0500 +--- trap.c 2009-03-20 21:37:00.000000000 -0400 +*************** +*** 756,760 **** + + flags = SEVAL_NONINT|SEVAL_NOHIST; +! if (sig != DEBUG_TRAP && sig != RETURN_TRAP) + flags |= SEVAL_RESETLINE; + if (function_code == 0) +--- 756,760 ---- + + flags = SEVAL_NONINT|SEVAL_NOHIST; +! if (sig != DEBUG_TRAP && sig != RETURN_TRAP && sig != ERROR_TRAP) + flags |= SEVAL_RESETLINE; + if (function_code == 0) +*** ../bash-4.0-patched/execute_cmd.c 2009-02-13 16:41:41.000000000 -0500 +--- execute_cmd.c 2009-03-21 14:16:11.000000000 -0400 +*************** +*** 569,572 **** +--- 569,573 ---- + /* Fork a subshell, turn off the subshell bit, turn off job + control and call execute_command () on the command again. */ ++ line_number_for_err_trap = line_number; + paren_pid = make_child (savestring (make_command_string (command)), + asynchronous); +*************** +*** 611,615 **** +--- 612,619 ---- + { + last_command_exit_value = exec_result; ++ save_line_number = line_number; ++ line_number = line_number_for_err_trap; + run_error_trap (); ++ line_number = save_line_number; + } + +*************** +*** 767,771 **** +--- 771,777 ---- + { + last_command_exit_value = exec_result; ++ line_number = line_number_for_err_trap; + run_error_trap (); ++ line_number = save_line_number; + } + +*************** +*** 2106,2109 **** +--- 2112,2116 ---- + COMMAND *tc, *second; + int ignore_return, exec_result, was_error_trap, invert; ++ volatile int save_line_number; + + ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0; +*************** +*** 2175,2178 **** +--- 2182,2186 ---- + ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0; + ++ line_number_for_err_trap = line_number; + exec_result = execute_pipeline (command, asynchronous, pipe_in, pipe_out, fds_to_close); + +*************** +*** 2180,2184 **** +--- 2188,2195 ---- + { + last_command_exit_value = exec_result; ++ save_line_number = line_number; ++ line_number = line_number_for_err_trap; + run_error_trap (); ++ line_number = save_line_number; + } + +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 15 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 16 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-017 b/testing/source/bash/bash-4.0-patches/bash40-017 new file mode 100644 index 00000000..ff42d778 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-017 @@ -0,0 +1,47 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-017 + +Bug-Reported-by: Lubomir Rintel <lkundrak@v3.sk> +Bug-Reference-ID: <1237654931.32737.13.camel@localhost.localdomain> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00174.html + +Bug-Description: + +Adding a null line to a here-document (e.g., by hitting EOF) causes the +shell to dump core attempting to dereference the NULL pointer. + +Patch: + +*** ../bash-4.0-patched/parse.y 2009-03-08 21:24:47.000000000 -0400 +--- parse.y 2009-03-21 14:38:42.000000000 -0400 +*************** +*** 1880,1884 **** + ret = read_a_line (remove_quoted_newline); + #if defined (HISTORY) +! if (remember_on_history && (parser_state & PST_HEREDOC)) + { + /* To make adding the the here-document body right, we need to rely +--- 1880,1884 ---- + ret = read_a_line (remove_quoted_newline); + #if defined (HISTORY) +! if (ret && remember_on_history && (parser_state & PST_HEREDOC)) + { + /* To make adding the the here-document body right, we need to rely +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 16 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 17 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-018 b/testing/source/bash/bash-4.0-patches/bash40-018 new file mode 100644 index 00000000..35f33e5f --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-018 @@ -0,0 +1,78 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-018 + +Bug-Reported-by: Dan Price <dp@eng.sun.com> +Bug-Reference-ID: <20090324171502.GA20582@eng.sun.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00184.html + +Bug-Description: + +A missing include file results in an empty function definition and a no-op +when checking whether or not the window size has changed. + +Patch: + +*** ../bash-4.0-patched/lib/sh/winsize.c 2008-08-12 13:53:51.000000000 -0400 +--- lib/sh/winsize.c 2009-04-06 10:44:20.000000000 -0400 +*************** +*** 31,44 **** + #include <sys/ioctl.h> + +! #if !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +! /* For struct winsize on SCO */ +! /* sys/ptem.h has winsize but needs mblk_t from sys/stream.h */ +! # if defined (HAVE_SYS_PTEM_H) && defined (TIOCGWINSZ) && defined (SIGWINCH) +! # if defined (HAVE_SYS_STREAM_H) +! # include <sys/stream.h> +! # endif + # include <sys/ptem.h> +! # endif /* HAVE_SYS_PTEM_H && TIOCGWINSZ && SIGWINCH */ +! #endif /* !STRUCT_WINSIZE_IN_SYS_IOCTL */ + + #include <stdio.h> +--- 31,57 ---- + #include <sys/ioctl.h> + +! /* Try to find the definitions of `struct winsize' and TIOGCWINSZ */ +! +! #if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ) +! # include <sys/ioctl.h> +! #endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */ +! +! #if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +! # include <termios.h> +! #endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ +! +! /* Not in either of the standard places, look around. */ +! #if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +! # if defined (HAVE_SYS_STREAM_H) +! # include <sys/stream.h> +! # endif /* HAVE_SYS_STREAM_H */ +! # if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */ + # include <sys/ptem.h> +! # define _IO_PTEM_H /* work around SVR4.2 1.1.4 bug */ +! # endif /* HAVE_SYS_PTEM_H */ +! # if defined (HAVE_SYS_PTE_H) /* ??? */ +! # include <sys/pte.h> +! # endif /* HAVE_SYS_PTE_H */ +! #endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ + + #include <stdio.h> +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 17 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 18 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-019 b/testing/source/bash/bash-4.0-patches/bash40-019 new file mode 100644 index 00000000..30efd680 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-019 @@ -0,0 +1,125 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-019 + +Bug-Reported-by: Oleksiy Melnyk <lex@upc.ua> +Bug-Reference-ID: <20090224142233.D2FEFC004@floyd.upc.ua> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00200.html + +Bug-Description: + +Using an external command as part of the DEBUG trap when job control is +enabled causes pipelines to misbehave. The problem has to do with process +groups assigned to the pipeline and terminal. + +Patch: + +*** ../bash-4.0-patched/jobs.c 2009-01-29 17:09:49.000000000 -0500 +--- jobs.c 2009-04-17 21:08:20.000000000 -0400 +*************** +*** 443,447 **** + the_pipeline = saved_pipeline; + already_making_children = saved_already_making_children; +! if (discard) + discard_pipeline (old_pipeline); + } +--- 443,447 ---- + the_pipeline = saved_pipeline; + already_making_children = saved_already_making_children; +! if (discard && old_pipeline) + discard_pipeline (old_pipeline); + } +*************** +*** 4203,4205 **** +--- 4204,4225 ---- + } + ++ void ++ save_pgrp_pipe (p, clear) ++ int *p; ++ int clear; ++ { ++ p[0] = pgrp_pipe[0]; ++ p[1] = pgrp_pipe[1]; ++ if (clear) ++ pgrp_pipe[0] = pgrp_pipe[1] = -1; ++ } ++ ++ void ++ restore_pgrp_pipe (p) ++ int *p; ++ { ++ pgrp_pipe[0] = p[0]; ++ pgrp_pipe[1] = p[1]; ++ } ++ + #endif /* PGRP_PIPE */ +*** ../bash-4.0-patched/jobs.h 2009-01-04 14:32:29.000000000 -0500 +--- jobs.h 2009-04-17 15:07:51.000000000 -0400 +*************** +*** 236,239 **** +--- 236,241 ---- + + extern void close_pgrp_pipe __P((void)); ++ extern void save_pgrp_pipe __P((int *, int)); ++ extern void restore_pgrp_pipe __P((int *)); + + #if defined (JOB_CONTROL) +*** ../bash-4.0-patched/trap.c 2009-01-16 17:07:53.000000000 -0500 +--- trap.c 2009-04-17 22:22:36.000000000 -0400 +*************** +*** 799,802 **** +--- 799,804 ---- + { + int trap_exit_value; ++ pid_t save_pgrp; ++ int save_pipe[2]; + + /* XXX - question: should the DEBUG trap inherit the RETURN trap? */ +*************** +*** 804,808 **** +--- 806,832 ---- + if ((sigmodes[DEBUG_TRAP] & SIG_TRAPPED) && ((sigmodes[DEBUG_TRAP] & SIG_IGNORED) == 0) && ((sigmodes[DEBUG_TRAP] & SIG_INPROGRESS) == 0)) + { ++ #if defined (JOB_CONTROL) ++ save_pgrp = pipeline_pgrp; ++ pipeline_pgrp = 0; ++ save_pipeline (1); ++ # if defined (PGRP_PIPE) ++ save_pgrp_pipe (save_pipe, 1); ++ # endif ++ stop_making_children (); ++ #endif ++ + trap_exit_value = _run_trap_internal (DEBUG_TRAP, "debug trap"); ++ ++ #if defined (JOB_CONTROL) ++ pipeline_pgrp = save_pgrp; ++ restore_pipeline (1); ++ # if defined (PGRP_PIPE) ++ close_pgrp_pipe (); ++ restore_pgrp_pipe (save_pipe); ++ # endif ++ if (pipeline_pgrp > 0) ++ give_terminal_to (pipeline_pgrp, 1); ++ notify_and_cleanup (); ++ #endif + + #if defined (DEBUGGER) +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 18 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 19 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-020 b/testing/source/bash/bash-4.0-patches/bash40-020 new file mode 100644 index 00000000..885f15ef --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-020 @@ -0,0 +1,83 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-020 + +Bug-Reported-by: Nicolai Lissner <nlissne@linux01.org> +Bug-Reference-ID: <20090412020510.GA29658@lilith> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00104.html + +Bug-Description: + +If a SIGWINCH arrives while bash is performing redisplay, multi-line prompts +are displayed incorrectly due to the display code being called recursively. + +Patch: + +*** ../bash-4.0-patched/lib/readline/readline.h 2009-01-04 14:32:33.000000000 -0500 +--- lib/readline/readline.h 2009-04-13 08:47:00.000000000 -0400 +*************** +*** 815,820 **** + #define RL_STATE_MULTIKEY 0x200000 /* reading multiple-key command */ + #define RL_STATE_VICMDONCE 0x400000 /* entered vi command mode at least once */ + +! #define RL_STATE_DONE 0x800000 /* done; accepted line */ + + #define RL_SETSTATE(x) (rl_readline_state |= (x)) +--- 815,821 ---- + #define RL_STATE_MULTIKEY 0x200000 /* reading multiple-key command */ + #define RL_STATE_VICMDONCE 0x400000 /* entered vi command mode at least once */ ++ #define RL_STATE_REDISPLAYING 0x800000 /* updating terminal display */ + +! #define RL_STATE_DONE 0x1000000 /* done; accepted line */ + + #define RL_SETSTATE(x) (rl_readline_state |= (x)) +*** ../bash-4.0-patched/lib/readline/display.c 2009-01-04 14:32:32.000000000 -0500 +--- lib/readline/display.c 2009-04-13 08:29:54.000000000 -0400 +*************** +*** 513,516 **** +--- 513,517 ---- + data structures. */ + _rl_block_sigint (); ++ RL_SETSTATE (RL_STATE_REDISPLAYING); + + if (!rl_display_prompt) +*************** +*** 1237,1240 **** +--- 1238,1242 ---- + } + ++ RL_UNSETSTATE (RL_STATE_REDISPLAYING); + _rl_release_sigint (); + } +*** ../bash-4.0-patched/lib/readline/terminal.c 2009-01-04 14:32:34.000000000 -0500 +--- lib/readline/terminal.c 2009-04-13 08:43:00.000000000 -0400 +*************** +*** 356,360 **** + if (CUSTOM_REDISPLAY_FUNC ()) + rl_forced_update_display (); +! else + _rl_redisplay_after_sigwinch (); + } +--- 356,360 ---- + if (CUSTOM_REDISPLAY_FUNC ()) + rl_forced_update_display (); +! else if (RL_ISSTATE(RL_STATE_REDISPLAYING) == 0) + _rl_redisplay_after_sigwinch (); + } +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 19 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 20 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-021 b/testing/source/bash/bash-4.0-patches/bash40-021 new file mode 100644 index 00000000..cf6ee1f5 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-021 @@ -0,0 +1,48 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-021 + +Bug-Reported-by: Matt Zyzik <matt.zyzik@nyu.edu> +Bug-Reference-ID: <20090319015542.696F62B8E8@ice.filescope.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00149.html + +Bug-Description: + +When not in a locale supporting multibyte characters, readline will occasionally +not erase characters between the cursor position and the end of the line +when killing text backwards. + +Patch: + +*** ../bash-4.0-patched/lib/readline/display.c 2009-01-04 14:32:32.000000000 -0500 +--- lib/readline/display.c 2009-04-14 14:00:18.000000000 -0400 +*************** +*** 1775,1779 **** + adjust col_lendiff based on the difference between _rl_last_c_pos + and _rl_screenwidth */ +! if (col_lendiff && (_rl_last_c_pos < _rl_screenwidth)) + #endif + { +--- 1775,1779 ---- + adjust col_lendiff based on the difference between _rl_last_c_pos + and _rl_screenwidth */ +! if (col_lendiff && ((MB_CUR_MAX == 1 || rl_byte_oriented) || (_rl_last_c_pos < _rl_screenwidth))) + #endif + { +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 20 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 21 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-022 b/testing/source/bash/bash-4.0-patches/bash40-022 new file mode 100644 index 00000000..5b685380 --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-022 @@ -0,0 +1,48 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-022 + +Bug-Reported-by: Bernd Eggink <monoped@sudrala.de> +Bug-Reference-ID: <49E65407.5010206@sudrala.de> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00118.html + +Bug-Description: + +When parsing case statements in command substitutions, the shell did not +note that a newline is a shell metacharacter and can legally be followed +by a reserved word (e.g., `esac'). + +Patch: + +*** ../bash-4.0-patched/parse.y 2009-03-08 21:24:47.000000000 -0400 +--- parse.y 2009-04-15 22:27:56.000000000 -0400 +*************** +*** 3355,3359 **** + + /* Meta-characters that can introduce a reserved word. Not perfect yet. */ +! if MBTEST((tflags & LEX_RESWDOK) == 0 && (tflags & LEX_CKCASE) && (tflags & LEX_INCOMMENT) == 0 && shellmeta(ch)) + { + /* Add this character. */ +--- 3375,3379 ---- + + /* Meta-characters that can introduce a reserved word. Not perfect yet. */ +! if MBTEST((tflags & LEX_RESWDOK) == 0 && (tflags & LEX_CKCASE) && (tflags & LEX_INCOMMENT) == 0 && (shellmeta(ch) || ch == '\n')) + { + /* Add this character. */ +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 21 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 22 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-023 b/testing/source/bash/bash-4.0-patches/bash40-023 new file mode 100644 index 00000000..d2376c7d --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-023 @@ -0,0 +1,62 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-023 + +Bug-Reported-by: Andreas Schwab <schwab@linux-m68k.org> +Bug-Reference-ID: <m21vrhhx08.fsf@igel.home> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00160.html + +Bug-Description: + +If the prompt length exactly matches the screen width, and the prompt ends +with invisible characters, readline positions the cursor incorrectly. + +Patch: + +*** ../bash-4.0-patched/lib/readline/display.c 2009-01-04 14:32:32.000000000 -0500 +--- lib/readline/display.c 2009-04-25 21:42:18.000000000 -0400 +*************** +*** 1895,1898 **** +--- 1897,1904 ---- + woff = WRAP_OFFSET (_rl_last_v_pos, wrap_offset); + cpos = _rl_last_c_pos; ++ ++ if (cpos == 0 && cpos == new) ++ return; ++ + #if defined (HANDLE_MULTIBYTE) + /* If we have multibyte characters, NEW is indexed by the buffer point in +*************** +*** 1908,1914 **** + desired display position. */ + if ((new > prompt_last_invisible) || /* XXX - don't use woff here */ +! (prompt_physical_chars > _rl_screenwidth && + _rl_last_v_pos == prompt_last_screen_line && +! wrap_offset >= woff && + new > (prompt_last_invisible-(_rl_screenwidth*_rl_last_v_pos)-wrap_offset))) + /* XXX last comparison might need to be >= */ +--- 1914,1920 ---- + desired display position. */ + if ((new > prompt_last_invisible) || /* XXX - don't use woff here */ +! (prompt_physical_chars >= _rl_screenwidth && + _rl_last_v_pos == prompt_last_screen_line && +! wrap_offset >= woff && dpos >= woff && + new > (prompt_last_invisible-(_rl_screenwidth*_rl_last_v_pos)-wrap_offset))) + /* XXX last comparison might need to be >= */ +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 22 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 23 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-024 b/testing/source/bash/bash-4.0-patches/bash40-024 new file mode 100644 index 00000000..ac2058ae --- /dev/null +++ b/testing/source/bash/bash-4.0-patches/bash40-024 @@ -0,0 +1,112 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.0 +Patch-ID: bash40-024 + +Bug-Reported-by: Matt Zyzik <matt.zyzik@nyu.edu> +Bug-Reference-ID: <20090405205428.4FDEA1C7175@ice.filescope.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00021.html + +Bug-Description: + +When using the ** globbing operator, bash will incorrectly add an extra +directory name when the preceding directory name ends with `*' or an empty +string when there is no preceding directory name. + +Patch: + +*** ../bash-4.0-patched/lib/glob/glob.c 2009-01-04 14:32:30.000000000 -0500 +--- lib/glob/glob.c 2009-04-28 10:22:29.000000000 -0400 +*************** +*** 357,361 **** + if (ep) + *ep = 0; +! if (r) + free (r); + return (struct globval *)0; +--- 357,361 ---- + if (ep) + *ep = 0; +! if (r && r != &glob_error_return) + free (r); + return (struct globval *)0; +*************** +*** 666,671 **** + } + +! /* compat: if GX_ALLDIRS, add the passed directory also */ +! if (add_current) + { + sdlen = strlen (dir); +--- 666,672 ---- + } + +! /* compat: if GX_ALLDIRS, add the passed directory also, but don't add an +! empty directory name. */ +! if (add_current && (flags & GX_NULLDIR) == 0) + { + sdlen = strlen (dir); +*************** +*** 679,686 **** + nextlink->next = lastlink; + lastlink = nextlink; +! if (flags & GX_NULLDIR) +! nextname[0] = '\0'; +! else +! bcopy (dir, nextname, sdlen + 1); + ++count; + } +--- 680,684 ---- + nextlink->next = lastlink; + lastlink = nextlink; +! bcopy (dir, nextname, sdlen + 1); + ++count; + } +*************** +*** 943,947 **** + register unsigned int l; + +! array = glob_dir_to_array (directories[i], temp_results, flags); + l = 0; + while (array[l] != NULL) +--- 941,950 ---- + register unsigned int l; + +! /* If we're expanding **, we don't need to glue the directory +! name to the results; we've already done it in glob_vector */ +! if ((dflags & GX_ALLDIRS) && filename[0] == '*' && filename[1] == '*' && filename[2] == '\0') +! array = temp_results; +! else +! array = glob_dir_to_array (directories[i], temp_results, flags); + l = 0; + while (array[l] != NULL) +*************** +*** 960,964 **** + + /* Note that the elements of ARRAY are not freed. */ +! free ((char *) array); + } + } +--- 963,968 ---- + + /* Note that the elements of ARRAY are not freed. */ +! if (array != temp_results) +! free ((char *) array); + } + } +*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 +--- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 23 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 24 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash.SlackBuild b/testing/source/bash/bash.SlackBuild new file mode 100755 index 00000000..fba2b632 --- /dev/null +++ b/testing/source/bash/bash.SlackBuild @@ -0,0 +1,80 @@ +#!/bin/sh +# Set initial variables: +CWD=`pwd` +if [ "$TMP" = "" ]; then + TMP=/tmp +fi +PKG=$TMP/package-bash + +VERSION=4.0 +ARCH=${ARCH:-x86_64} +BUILD=${BUILD:-1} + +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" +elif [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" +fi + +if [ ! -d $TMP ]; then + mkdir -p $TMP # location to build the source +fi +rm -rf $PKG +mkdir -p $PKG + +# Determine bash patchlevel: +PATCHLEVEL="$( cd $CWD/bash-${VERSION}-patches ; /bin/ls bash40-??? | tail -1 | cut -f 2 -d - 2> /dev/null )" +if [ "$PATCHLEVEL" = "" ]; then + PATCHLEVEL=0 +fi + +cd $TMP +rm -rf bash-$VERSION +tar xjvf $CWD/bash-$VERSION.tar.bz2 || exit 1 +cd bash-$VERSION || exit 1 +chown -R root:root . +find . -perm 664 | xargs chmod 644 +find . -perm 775 | xargs chmod 755 + +if [ -d $CWD/bash-${VERSION}-patches ]; then + ( cd $CWD/bash-${VERSION}-patches ; cat bash40-??? ) | patch -p0 --verbose || exit 1 +fi + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --build=$ARCH-slackware-linux +make -j4 || make || exit 1 +make install DESTDIR=$PKG +mv $PKG/usr/share/doc $PKG/usr +mkdir -p $PKG/bin +mv $PKG/usr/bin/bash $PKG/bin/bash4.new +strip --strip-unneeded $PKG/bin/bash4.new +# We don't include the "bashbug" script. +rm -rf $PKG/usr/bin $PKG/usr/man/man1/bashbug.1 +gzip -9 $PKG/usr/man/man1/* +mkdir -p $PKG/usr/doc/bash-$VERSION +cp -a AUTHORS CHANGES COMPAT COPYING INSTALL MANIFEST NEWS NOTES \ + README Y2K doc/FAQ doc/INTRO $PKG/usr/doc/bash-$VERSION +cd doc +groff -ms -Tascii article.ms > $PKG/usr/doc/bash-$VERSION/article.txt +# bash.1 is already installed by "make install" +for page in builtins.1 rbash.1 ; do + cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz +done +rm -f $PKG/usr/info/dir +gzip -9 $PKG/usr/info/* +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +# Build the package: +cd $PKG +makepkg -l y -c n $TMP/bash-$VERSION.$PATCHLEVEL-$ARCH-$BUILD.txz + diff --git a/testing/source/bash/doinst.sh b/testing/source/bash/doinst.sh new file mode 100644 index 00000000..867958fb --- /dev/null +++ b/testing/source/bash/doinst.sh @@ -0,0 +1,18 @@ +if [ -r bin/bash ]; then + mv bin/bash bin/bash.old +fi +mv bin/bash4.new bin/bash +if [ -f bin/bash.old ]; then + rm -f bin/bash.old +fi +if [ ! -r etc/shells ]; then + touch etc/shells + chmod 644 etc/shells +fi +if grep -wq /bin/bash etc/shells ; then + true +else + echo /bin/bash >> etc/shells +fi +( cd usr/bin ; rm -rf bash ) +( cd usr/bin ; ln -sf /bin/bash bash ) diff --git a/testing/source/bash/slack-desc b/testing/source/bash/slack-desc new file mode 100644 index 00000000..f2fdb929 --- /dev/null +++ b/testing/source/bash/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +bash: bash (sh-compatible shell) +bash: +bash: The GNU Bourne-Again SHell. Bash is a sh-compatible command +bash: interpreter that executes commands read from the standard input or +bash: from a file. Bash also incorporates useful features from the Korn +bash: and C shells (ksh and csh). Bash is ultimately intended to be a +bash: conformant implementation of the IEEE Posix Shell and Tools +bash: specification (IEEE Working Group 1003.2). +bash: +bash: Bash must be present for the system to boot properly. +bash: diff --git a/testing/source/linux-2.6.30.5/config-generic-2.6.30.5 b/testing/source/linux-2.6.30.5/config-generic-2.6.30.5 new file mode 100644 index 00000000..95351f91 --- /dev/null +++ b/testing/source/linux-2.6.30.5/config-generic-2.6.30.5 @@ -0,0 +1,4310 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30.5 +# Sat Aug 22 19:26:41 2009 +# +CONFIG_64BIT=y +# CONFIG_X86_32 is not set +CONFIG_X86_64=y +CONFIG_X86=y +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_GPIO=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y +CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_TRAMPOLINE=y +# CONFIG_KTIME_SCALAR is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_OPROFILE=m +# CONFIG_OPROFILE_IBS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_FREEZER=y + +# +# Processor type and features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +# CONFIG_SPARSE_IRQ is not set +CONFIG_X86_MPPARSE=y +# CONFIG_X86_EXTENDED_PLATFORM is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set +CONFIG_MEMTEST=y +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +CONFIG_GENERIC_CPU=y +CONFIG_X86_CPU=y +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y +# CONFIG_X86_DS is not set +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +# CONFIG_CALGARY_IOMMU is not set +# CONFIG_AMD_IOMMU is not set +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +# CONFIG_IOMMU_API is not set +CONFIG_NR_CPUS=32 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_I8K=m +CONFIG_MICROCODE=m +CONFIG_MICROCODE_INTEL=y +CONFIG_MICROCODE_AMD=y +CONFIG_MICROCODE_OLD_INTERFACE=y +CONFIG_X86_MSR=m +CONFIG_X86_CPUID=m +CONFIG_X86_CPU_DEBUG=m +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_DIRECT_GBPAGES=y +# CONFIG_NUMA is not set +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_MMU_NOTIFIER=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set +CONFIG_X86_RESERVE_LOW_64K=y +CONFIG_MTRR=y +CONFIG_MTRR_SANITIZER=y +CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 +CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 +# CONFIG_X86_PAT is not set +# CONFIG_EFI is not set +CONFIG_SECCOMP=y +CONFIG_CC_STACKPROTECTOR_ALL=y +CONFIG_CC_STACKPROTECTOR=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x200000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +CONFIG_COMPAT_VDSO=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y + +# +# Power management and ACPI options +# +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="\"\"" +CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y +CONFIG_ACPI_AC=m +CONFIG_ACPI_BATTERY=m +CONFIG_ACPI_BUTTON=m +CONFIG_ACPI_VIDEO=m +CONFIG_ACPI_FAN=m +CONFIG_ACPI_DOCK=y +CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=m +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=m +CONFIG_X86_PM_TIMER=y +CONFIG_ACPI_CONTAINER=m +# CONFIG_ACPI_SBS is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=m +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=m +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=m +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m + +# +# CPUFreq processor drivers +# +CONFIG_X86_ACPI_CPUFREQ=m +CONFIG_X86_POWERNOW_K8=m +CONFIG_X86_SPEEDSTEP_CENTRINO=m +CONFIG_X86_P4_CLOCKMOD=m + +# +# shared options +# +CONFIG_X86_SPEEDSTEP_LIB=m +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y + +# +# Memory power savings +# +CONFIG_I7300_IDLE_IOAT_CHANNEL=y +CONFIG_I7300_IDLE=m + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +# CONFIG_DMAR is not set +# CONFIG_INTR_REMAP is not set +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=m +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set +CONFIG_ISA_DMA_API=y +CONFIG_K8_NB=y +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +CONFIG_PD6729=m +CONFIG_I82092=m +CONFIG_PCCARD_NONSTATIC=m +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_FAKE=m +CONFIG_HOTPLUG_PCI_ACPI=m +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +# CONFIG_HOTPLUG_PCI_CPCI is not set +CONFIG_HOTPLUG_PCI_SHPC=m + +# +# Executable file formats / Emulations +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_IA32_EMULATION=y +CONFIG_IA32_AOUT=m +CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m + +# +# DECnet: Netfilter Configuration +# +# CONFIG_DECNET_NF_GRABULATOR is not set +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +# CONFIG_IP_DCCP_CCID3 is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_DECNET=m +# CONFIG_DECNET_ROUTER is not set +CONFIG_LLC=y +CONFIG_LLC2=m +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +# CONFIG_AX25_DAMA_SLAVE is not set +CONFIG_NETROM=m +CONFIG_ROSE=m + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_BAYCOM_PAR=m +CONFIG_YAM=m +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +CONFIG_DONGLE=y +CONFIG_ESI_DONGLE=m +CONFIG_ACTISYS_DONGLE=m +CONFIG_TEKRAM_DONGLE=m +CONFIG_TOIM3232_DONGLE=m +CONFIG_LITELINK_DONGLE=m +CONFIG_MA600_DONGLE=m +CONFIG_GIRBIL_DONGLE=m +CONFIG_MCP2120_DONGLE=m +CONFIG_OLD_BELKIN_DONGLE=m +CONFIG_ACT200L_DONGLE=m +CONFIG_KINGSUN_DONGLE=m +CONFIG_KSDAZZLE_DONGLE=m +CONFIG_KS959_DONGLE=m + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_NSC_FIR=m +CONFIG_WINBOND_FIR=m +CONFIG_SMC_IRCC_FIR=m +CONFIG_ALI_FIR=m +CONFIG_VLSI_FIR=m +CONFIG_VIA_FIR=m +CONFIG_MCS_FIR=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_CMTP=m +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=m +CONFIG_RFKILL_INPUT=m +CONFIG_RFKILL_LEDS=y +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +CONFIG_NET_9P_RDMA=m +# CONFIG_NET_9P_DEBUG is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=m +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_TESTS=m +CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_AR7_PARTS=m + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_HAVE_MTD_OTP=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +CONFIG_FTL=m +CONFIG_NFTL=m +CONFIG_NFTL_RW=y +CONFIG_INFTL=m +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +CONFIG_MTD_OOPS=m + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_MAP_BANK_WIDTH_8=y +CONFIG_MTD_MAP_BANK_WIDTH_16=y +CONFIG_MTD_MAP_BANK_WIDTH_32=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_I8=y +CONFIG_MTD_OTP=y +CONFIG_MTD_CFI_INTELEXT=m +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_RAM=m +CONFIG_MTD_ROM=m +CONFIG_MTD_ABSENT=m + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +CONFIG_MTD_SC520CDP=m +CONFIG_MTD_NETSC520=m +CONFIG_MTD_TS5500=m +CONFIG_MTD_SBC_GXX=m +CONFIG_MTD_AMD76XROM=m +CONFIG_MTD_ICHXROM=m +CONFIG_MTD_ESB2ROM=m +CONFIG_MTD_CK804XROM=m +CONFIG_MTD_SCB2_FLASH=m +CONFIG_MTD_NETtel=m +CONFIG_MTD_DILNETPC=m +CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 +CONFIG_MTD_L440GX=m +CONFIG_MTD_PCI=m +CONFIG_MTD_INTEL_VR_NOR=m +CONFIG_MTD_PLATRAM=m + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_PMC551=m +CONFIG_MTD_PMC551_BUGFIX=y +# CONFIG_MTD_PMC551_DEBUG is not set +CONFIG_MTD_SLRAM=m +CONFIG_MTD_PHRAM=m +CONFIG_MTD_MTDRAM=m +CONFIG_MTDRAM_TOTAL_SIZE=4096 +CONFIG_MTDRAM_ERASE_SIZE=128 +CONFIG_MTD_BLOCK2MTD=m + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +CONFIG_MTD_DOC2001PLUS=m +CONFIG_MTD_DOCPROBE=m +CONFIG_MTD_DOCECC=m +CONFIG_MTD_DOCPROBE_ADVANCED=y +CONFIG_MTD_DOCPROBE_ADDRESS=0x0000 +CONFIG_MTD_DOCPROBE_HIGH=y +CONFIG_MTD_DOCPROBE_55AA=y +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_ECC_SMC=y +CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_MTD_NAND_IDS=m +CONFIG_MTD_NAND_DISKONCHIP=m +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 +CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y +CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y +CONFIG_MTD_NAND_CAFE=m +CONFIG_MTD_NAND_NANDSIM=m +CONFIG_MTD_NAND_PLATFORM=m +CONFIG_MTD_ALAUDA=m +CONFIG_MTD_ONENAND=m +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OTP=y +CONFIG_MTD_ONENAND_2X_PROGRAM=y +CONFIG_MTD_ONENAND_SIM=m + +# +# LPDDR flash memory drivers +# +CONFIG_MTD_LPDDR=m +CONFIG_MTD_QINFO_PROBE=m + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_PC_PCMCIA=m +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_AX88796=m +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_FD=y +CONFIG_PARIDE=m + +# +# Parallel IDE high-level drivers +# +CONFIG_PARIDE_PD=m +CONFIG_PARIDE_PCD=m +CONFIG_PARIDE_PF=m +CONFIG_PARIDE_PT=m +CONFIG_PARIDE_PG=m + +# +# Parallel IDE protocol modules +# +CONFIG_PARIDE_ATEN=m +CONFIG_PARIDE_BPCK=m +CONFIG_PARIDE_COMM=m +CONFIG_PARIDE_DSTR=m +CONFIG_PARIDE_FIT2=m +CONFIG_PARIDE_FIT3=m +CONFIG_PARIDE_EPAT=m +CONFIG_PARIDE_EPATC8=y +CONFIG_PARIDE_EPIA=m +CONFIG_PARIDE_FRIQ=m +CONFIG_PARIDE_FRPW=m +CONFIG_PARIDE_KBIC=m +CONFIG_PARIDE_KTTI=m +CONFIG_PARIDE_ON20=m +CONFIG_PARIDE_ON26=m +CONFIG_BLK_CPQ_DA=m +CONFIG_BLK_CPQ_CISS_DA=m +CONFIG_CISS_SCSI_TAPE=y +CONFIG_BLK_DEV_DAC960=m +CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_SX8=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=m +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +CONFIG_IBM_ASM=m +CONFIG_PHANTOM=m +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_HP_ILO=m +CONFIG_DELL_LAPTOP=m +CONFIG_ISL29003=m +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_93CX6=m +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +CONFIG_IDE_GD_ATAPI=y +CONFIG_BLK_DEV_IDECS=m +CONFIG_BLK_DEV_DELKIN=m +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +CONFIG_BLK_DEV_IDETAPE=m +CONFIG_BLK_DEV_IDEACPI=y +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=m +CONFIG_BLK_DEV_PLATFORM=m +CONFIG_BLK_DEV_CMD640=y +CONFIG_BLK_DEV_CMD640_ENHANCED=y +CONFIG_BLK_DEV_IDEPNP=y +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_RZ1000=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_BLK_DEV_AEC62XX=y +CONFIG_BLK_DEV_ALI15X3=y +CONFIG_BLK_DEV_AMD74XX=y +CONFIG_BLK_DEV_ATIIXP=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_TRIFLEX=y +CONFIG_BLK_DEV_CS5520=y +CONFIG_BLK_DEV_CS5530=y +CONFIG_BLK_DEV_HPT366=y +CONFIG_BLK_DEV_JMICRON=y +CONFIG_BLK_DEV_SC1200=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_BLK_DEV_IT8172=y +CONFIG_BLK_DEV_IT8213=y +CONFIG_BLK_DEV_IT821X=y +# CONFIG_BLK_DEV_NS87415 is not set +CONFIG_BLK_DEV_PDC202XX_OLD=y +CONFIG_BLK_DEV_PDC202XX_NEW=y +CONFIG_BLK_DEV_SVWKS=y +CONFIG_BLK_DEV_SIIMAGE=y +CONFIG_BLK_DEV_SIS5513=y +CONFIG_BLK_DEV_SLC90E66=y +CONFIG_BLK_DEV_TRM290=y +CONFIG_BLK_DEV_VIA82CXXX=y +CONFIG_BLK_DEV_TC86C001=y +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_BLK_DEV_3W_XXXX_RAID=m +CONFIG_SCSI_3W_9XXX=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_AACRAID=m +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +# CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_AIC7XXX_DEBUG_MASK=0 +# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set +CONFIG_SCSI_AIC7XXX_OLD=m +CONFIG_SCSI_AIC79XX=m +CONFIG_AIC79XX_CMDS_PER_DEVICE=4 +CONFIG_AIC79XX_RESET_DELAY_MS=15000 +# CONFIG_AIC79XX_DEBUG_ENABLE is not set +CONFIG_AIC79XX_DEBUG_MASK=0 +# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set +CONFIG_SCSI_DPT_I2O=m +CONFIG_SCSI_ADVANSYS=m +CONFIG_SCSI_ARCMSR=m +# CONFIG_SCSI_ARCMSR_AER is not set +CONFIG_MEGARAID_NEWGEN=y +CONFIG_MEGARAID_MM=m +CONFIG_MEGARAID_MAILBOX=m +CONFIG_MEGARAID_LEGACY=m +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS_LOGGING is not set +CONFIG_SCSI_HPTIOP=m +CONFIG_SCSI_BUSLOGIC=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +CONFIG_FCOE_FNIC=m +CONFIG_SCSI_DMX3191D=m +CONFIG_SCSI_EATA=m +# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set +# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set +CONFIG_SCSI_EATA_MAX_TAGS=16 +CONFIG_SCSI_FUTURE_DOMAIN=m +CONFIG_SCSI_GDTH=m +CONFIG_SCSI_IPS=m +CONFIG_SCSI_INITIO=m +CONFIG_SCSI_INIA100=m +CONFIG_SCSI_PPA=m +CONFIG_SCSI_IMM=m +# CONFIG_SCSI_IZIP_EPP16 is not set +# CONFIG_SCSI_IZIP_SLOW_CTR is not set +CONFIG_SCSI_MVSAS=m +CONFIG_SCSI_STEX=m +CONFIG_SCSI_SYM53C8XX_2=m +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +CONFIG_SCSI_IPR=m +# CONFIG_SCSI_IPR_TRACE is not set +# CONFIG_SCSI_IPR_DUMP is not set +CONFIG_SCSI_QLOGIC_1280=m +CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +CONFIG_SCSI_DC395x=m +CONFIG_SCSI_DC390T=m +CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_SRP=m +CONFIG_SCSI_LOWLEVEL_PCMCIA=y +CONFIG_PCMCIA_FDOMAIN=m +CONFIG_PCMCIA_QLOGIC=m +CONFIG_PCMCIA_SYM53C500=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +CONFIG_ATA_PIIX=y +CONFIG_SATA_MV=y +CONFIG_SATA_NV=y +CONFIG_PDC_ADMA=y +CONFIG_SATA_QSTOR=y +CONFIG_SATA_PROMISE=y +CONFIG_SATA_SX4=y +CONFIG_SATA_SIL=y +CONFIG_SATA_SIS=y +CONFIG_SATA_ULI=y +CONFIG_SATA_VIA=y +CONFIG_SATA_VITESSE=y +CONFIG_SATA_INIC162X=y +CONFIG_PATA_ACPI=y +CONFIG_PATA_ALI=m +CONFIG_PATA_AMD=m +CONFIG_PATA_ARTOP=m +CONFIG_PATA_ATIIXP=m +CONFIG_PATA_CMD640_PCI=m +CONFIG_PATA_CMD64X=m +CONFIG_PATA_CS5520=m +CONFIG_PATA_CS5530=m +CONFIG_PATA_CYPRESS=m +CONFIG_PATA_EFAR=m +CONFIG_ATA_GENERIC=y +CONFIG_PATA_HPT366=m +CONFIG_PATA_HPT37X=m +CONFIG_PATA_HPT3X2N=m +CONFIG_PATA_HPT3X3=m +CONFIG_PATA_HPT3X3_DMA=y +CONFIG_PATA_IT821X=m +CONFIG_PATA_IT8213=m +CONFIG_PATA_JMICRON=m +CONFIG_PATA_TRIFLEX=m +CONFIG_PATA_MARVELL=m +CONFIG_PATA_MPIIX=m +CONFIG_PATA_OLDPIIX=m +CONFIG_PATA_NETCELL=m +CONFIG_PATA_NINJA32=m +CONFIG_PATA_NS87410=m +CONFIG_PATA_NS87415=m +CONFIG_PATA_OPTI=m +CONFIG_PATA_OPTIDMA=m +CONFIG_PATA_PCMCIA=m +CONFIG_PATA_PDC_OLD=m +CONFIG_PATA_RADISYS=m +CONFIG_PATA_RZ1000=m +CONFIG_PATA_SC1200=m +CONFIG_PATA_SERVERWORKS=m +CONFIG_PATA_PDC2027X=m +CONFIG_PATA_SIL680=m +CONFIG_PATA_SIS=y +CONFIG_PATA_VIA=m +CONFIG_PATA_WINBOND=m +CONFIG_PATA_SCH=m +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID456=y +CONFIG_MD_RAID6_PQ=y +CONFIG_MD_MULTIPATH=y +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=y +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=m +CONFIG_FUSION_LAN=m +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +CONFIG_IEEE1394=m +CONFIG_IEEE1394_OHCI1394=m +CONFIG_IEEE1394_PCILYNX=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=m +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +CONFIG_I2O=m +CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y +CONFIG_I2O_EXT_ADAPTEC=y +CONFIG_I2O_EXT_ADAPTEC_DMA64=y +CONFIG_I2O_CONFIG=m +# CONFIG_I2O_CONFIG_OLD_IOCTL is not set +CONFIG_I2O_BUS=m +CONFIG_I2O_BLOCK=m +CONFIG_I2O_SCSI=m +CONFIG_I2O_PROC=m +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_IFB=m +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_NET_SB1000=m +CONFIG_ARCNET=m +CONFIG_ARCNET_1201=m +CONFIG_ARCNET_1051=m +CONFIG_ARCNET_RAW=m +CONFIG_ARCNET_CAP=m +CONFIG_ARCNET_COM90xx=m +CONFIG_ARCNET_COM90xxIO=m +CONFIG_ARCNET_RIM_I=m +CONFIG_ARCNET_COM20020=m +CONFIG_ARCNET_COM20020_PCI=m +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MDIO_BITBANG=m +CONFIG_MDIO_GPIO=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +CONFIG_HAPPYMEAL=m +CONFIG_SUNGEM=m +CONFIG_CASSINI=m +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=m +CONFIG_TYPHOON=m +CONFIG_ETHOC=m +CONFIG_DNET=m +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_TULIP=m +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +CONFIG_DE4X5=m +CONFIG_WINBOND_840=m +CONFIG_DM9102=m +CONFIG_ULI526X=m +CONFIG_PCMCIA_XIRCOM=m +CONFIG_HP100=m +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +CONFIG_AMD8111_ETH=m +CONFIG_ADAPTEC_STARFIRE=m +CONFIG_B44=m +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y +CONFIG_FORCEDETH=m +CONFIG_FORCEDETH_NAPI=y +CONFIG_E100=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NE2K_PCI=m +CONFIG_8139CP=m +CONFIG_8139TOO=m +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R6040=m +CONFIG_SIS900=m +CONFIG_EPIC100=m +CONFIG_SMSC9420=m +CONFIG_SUNDANCE=m +# CONFIG_SUNDANCE_MMIO is not set +CONFIG_TLAN=m +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y +CONFIG_SC92031=m +CONFIG_NET_POCKET=y +CONFIG_ATP=m +CONFIG_DE600=m +CONFIG_DE620=m +CONFIG_ATL2=m +CONFIG_NETDEV_1000=y +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +CONFIG_DL2K=m +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_IP1000=m +CONFIG_IGB=m +CONFIG_IGB_DCA=y +CONFIG_IGBVF=m +CONFIG_NS83820=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_R8169=m +CONFIG_R8169_VLAN=y +CONFIG_SIS190=m +CONFIG_SKGE=m +# CONFIG_SKGE_DEBUG is not set +CONFIG_SKY2=m +# CONFIG_SKY2_DEBUG is not set +CONFIG_VIA_VELOCITY=m +CONFIG_TIGON3=m +CONFIG_BNX2=m +CONFIG_QLA3XXX=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_JME=m +CONFIG_NETDEV_10000=y +CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T1_1G=y +CONFIG_CHELSIO_T3_DEPENDS=y +CONFIG_CHELSIO_T3=m +CONFIG_ENIC=m +CONFIG_IXGBE=m +CONFIG_IXGBE_DCA=y +CONFIG_IXGB=m +CONFIG_S2IO=m +CONFIG_VXGE=m +# CONFIG_VXGE_DEBUG_TRACE_ALL is not set +CONFIG_MYRI10GE=m +CONFIG_MYRI10GE_DCA=y +CONFIG_NETXEN_NIC=m +CONFIG_NIU=m +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +CONFIG_TEHUTI=m +CONFIG_BNX2X=m +CONFIG_QLGE=m +CONFIG_SFC=m +CONFIG_SFC_MTD=y +CONFIG_BE2NET=m +CONFIG_TR=y +CONFIG_IBMOL=m +CONFIG_3C359=m +CONFIG_TMS380TR=m +CONFIG_TMSPCI=m +CONFIG_ABYSS=m + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_PCMCIA_RAYCS=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AIRO=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_AT76C50X_USB=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_WL3501=m +CONFIG_PRISM54=m +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8180=m +CONFIG_RTL8187=m +CONFIG_ADM8211=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_MWL8K=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_P54_LEDS=y +CONFIG_ATH5K=m +# CONFIG_ATH5K_DEBUG is not set +CONFIG_ATH9K=m +# CONFIG_ATH9K_DEBUG is not set +CONFIG_AR9170_USB=m +CONFIG_AR9170_LEDS=y +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_RADIOTAP=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +# CONFIG_IPW2200_DEBUG is not set +CONFIG_LIBIPW=m +# CONFIG_LIBIPW_DEBUG is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y +# CONFIG_IWLWIFI_RFKILL is not set +# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set +# CONFIG_IWLWIFI_DEBUG is not set +CONFIG_IWLAGN=m +CONFIG_IWL4965=y +CONFIG_IWL5000=y +CONFIG_IWL3945=m +CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m +CONFIG_B43=m +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_PCMCIA=y +CONFIG_B43_PIO=y +CONFIG_B43_LEDS=y +CONFIG_B43_RFKILL=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_RFKILL=y +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=m +CONFIG_RT2400PCI=m +CONFIG_RT2500PCI=m +CONFIG_RT61PCI=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_RFKILL=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m +CONFIG_WIMAX_I2400M_USB=m +CONFIG_WIMAX_I2400M_SDIO=m +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_HSO=m +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=m +CONFIG_PCMCIA_3C574=m +CONFIG_PCMCIA_FMVJ18X=m +CONFIG_PCMCIA_PCNET=m +CONFIG_PCMCIA_NMCLAN=m +CONFIG_PCMCIA_SMC91C92=m +CONFIG_PCMCIA_XIRC2PS=m +CONFIG_PCMCIA_AXNET=m +CONFIG_ARCNET_COM20020_CS=m +CONFIG_PCMCIA_IBMTR=m +CONFIG_WAN=y +CONFIG_LANMEDIA=m +CONFIG_HDLC=m +CONFIG_HDLC_RAW=m +CONFIG_HDLC_RAW_ETH=m +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m + +# +# X.25/LAPB support is disabled +# +CONFIG_PCI200SYN=m +CONFIG_WANXL=m +# CONFIG_PC300TOO is not set +CONFIG_FARSYNC=m +CONFIG_DSCC4=m +# CONFIG_DSCC4_PCISYNC is not set +# CONFIG_DSCC4_PCI_RST is not set +CONFIG_DLCI=m +CONFIG_DLCI_MAX=8 +CONFIG_WAN_ROUTER_DRIVERS=m +CONFIG_CYCLADES_SYNC=m +CONFIG_CYCLOMX_X25=y +CONFIG_SBNI=m +# CONFIG_SBNI_MULTILINE is not set +CONFIG_ATM_DRIVERS=y +CONFIG_ATM_DUMMY=m +CONFIG_ATM_TCP=m +CONFIG_ATM_LANAI=m +CONFIG_ATM_ENI=m +# CONFIG_ATM_ENI_DEBUG is not set +# CONFIG_ATM_ENI_TUNE_BURST is not set +CONFIG_ATM_FIRESTREAM=m +CONFIG_ATM_ZATM=m +# CONFIG_ATM_ZATM_DEBUG is not set +CONFIG_ATM_IDT77252=m +# CONFIG_ATM_IDT77252_DEBUG is not set +# CONFIG_ATM_IDT77252_RCV_ALL is not set +CONFIG_ATM_IDT77252_USE_SUNI=y +CONFIG_ATM_AMBASSADOR=m +# CONFIG_ATM_AMBASSADOR_DEBUG is not set +CONFIG_ATM_HORIZON=m +# CONFIG_ATM_HORIZON_DEBUG is not set +CONFIG_ATM_IA=m +# CONFIG_ATM_IA_DEBUG is not set +CONFIG_ATM_FORE200E=m +# CONFIG_ATM_FORE200E_USE_TASKLET is not set +CONFIG_ATM_FORE200E_TX_RETRY=16 +CONFIG_ATM_FORE200E_DEBUG=0 +CONFIG_ATM_HE=m +# CONFIG_ATM_HE_USE_SUNI is not set +CONFIG_ATM_SOLOS=m +CONFIG_FDDI=y +CONFIG_DEFXX=m +# CONFIG_DEFXX_MMIO is not set +CONFIG_SKFP=m +CONFIG_HIPPI=y +CONFIG_ROADRUNNER=m +# CONFIG_ROADRUNNER_LARGE_RINGS is not set +CONFIG_PLIP=m +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +CONFIG_PPPOL2TP=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +CONFIG_NET_FC=y +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_VIRTIO_NET=m +CONFIG_ISDN=y +CONFIG_MISDN=m +CONFIG_MISDN_DSP=m +CONFIG_MISDN_L1OIP=m + +# +# mISDN hardware drivers +# +CONFIG_MISDN_HFCPCI=m +CONFIG_MISDN_HFCMULTI=m +CONFIG_MISDN_HFCUSB=m +CONFIG_ISDN_I4L=m +CONFIG_ISDN_PPP=y +CONFIG_ISDN_PPP_VJ=y +CONFIG_ISDN_MPP=y +CONFIG_IPPP_FILTER=y +CONFIG_ISDN_PPP_BSDCOMP=m +CONFIG_ISDN_AUDIO=y +CONFIG_ISDN_TTY_FAX=y + +# +# ISDN feature submodules +# +CONFIG_ISDN_DIVERSION=m + +# +# ISDN4Linux hardware drivers +# + +# +# Passive cards +# +CONFIG_ISDN_DRV_HISAX=m + +# +# D-channel protocol features +# +CONFIG_HISAX_EURO=y +CONFIG_DE_AOC=y +CONFIG_HISAX_NO_SENDCOMPLETE=y +CONFIG_HISAX_NO_LLC=y +CONFIG_HISAX_NO_KEYPAD=y +CONFIG_HISAX_1TR6=y +CONFIG_HISAX_NI1=y +CONFIG_HISAX_MAX_CARDS=8 + +# +# HiSax supported cards +# +CONFIG_HISAX_16_3=y +CONFIG_HISAX_TELESPCI=y +CONFIG_HISAX_S0BOX=y +CONFIG_HISAX_FRITZPCI=y +CONFIG_HISAX_AVM_A1_PCMCIA=y +CONFIG_HISAX_ELSA=y +CONFIG_HISAX_DIEHLDIVA=y +CONFIG_HISAX_SEDLBAUER=y +CONFIG_HISAX_NETJET=y +CONFIG_HISAX_NETJET_U=y +CONFIG_HISAX_NICCY=y +CONFIG_HISAX_BKM_A4T=y +CONFIG_HISAX_SCT_QUADRO=y +CONFIG_HISAX_GAZEL=y +CONFIG_HISAX_HFC_PCI=y +CONFIG_HISAX_W6692=y +CONFIG_HISAX_HFC_SX=y +CONFIG_HISAX_ENTERNOW_PCI=y +# CONFIG_HISAX_DEBUG is not set + +# +# HiSax PCMCIA card service modules +# +CONFIG_HISAX_SEDLBAUER_CS=m +CONFIG_HISAX_ELSA_CS=m +CONFIG_HISAX_AVM_A1_CS=m +CONFIG_HISAX_TELES_CS=m + +# +# HiSax sub driver modules +# +CONFIG_HISAX_ST5481=m +CONFIG_HISAX_HFCUSB=m +CONFIG_HISAX_HFC4S8S=m +CONFIG_HISAX_FRITZ_PCIPNP=m +CONFIG_HISAX_HDLC=y + +# +# Active cards +# +CONFIG_HYSDN=m +CONFIG_HYSDN_CAPI=y +CONFIG_ISDN_DRV_GIGASET=m +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +# CONFIG_GIGASET_M101 is not set +# CONFIG_GIGASET_DEBUG is not set +# CONFIG_GIGASET_UNDOCREQ is not set +CONFIG_ISDN_CAPI=m +CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y +CONFIG_CAPI_TRACE=y +CONFIG_ISDN_CAPI_MIDDLEWARE=y +CONFIG_ISDN_CAPI_CAPI20=m +CONFIG_ISDN_CAPI_CAPIFS_BOOL=y +CONFIG_ISDN_CAPI_CAPIFS=m +CONFIG_ISDN_CAPI_CAPIDRV=m + +# +# CAPI hardware drivers +# +CONFIG_CAPI_AVM=y +CONFIG_ISDN_DRV_AVMB1_B1PCI=m +CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y +CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m +CONFIG_ISDN_DRV_AVMB1_AVM_CS=m +CONFIG_ISDN_DRV_AVMB1_T1PCI=m +CONFIG_ISDN_DRV_AVMB1_C4=m +CONFIG_CAPI_EICON=y +CONFIG_ISDN_DIVAS=m +CONFIG_ISDN_DIVAS_BRIPCI=y +CONFIG_ISDN_DIVAS_PRIPCI=y +CONFIG_ISDN_DIVAS_DIVACAPI=m +CONFIG_ISDN_DIVAS_USERIDI=m +CONFIG_ISDN_DIVAS_MAINT=m +CONFIG_PHONE=m +CONFIG_PHONE_IXJ=m +CONFIG_PHONE_IXJ_PCMCIA=m + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_STOWAWAY=m +CONFIG_KEYBOARD_GPIO=m +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_GPIO=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_UCB1400=m +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +CONFIG_INPUT_APANEL=m +CONFIG_INPUT_ATLAS_BTNS=m +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_PCF50633_PMU=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_CT82C710=m +CONFIG_SERIO_PARKBD=m +CONFIG_SERIO_PCIPS2=m +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_GAMEPORT=m +CONFIG_GAMEPORT_NS558=m +CONFIG_GAMEPORT_L4=m +CONFIG_GAMEPORT_EMU10K1=m +CONFIG_GAMEPORT_FM801=m + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_COMPUTONE=m +CONFIG_ROCKETPORT=m +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +CONFIG_DIGIEPCA=m +CONFIG_MOXA_INTELLIO=m +CONFIG_MOXA_SMARTIO=m +CONFIG_ISI=m +CONFIG_SYNCLINK=m +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +CONFIG_N_HDLC=m +CONFIG_RISCOM8=m +CONFIG_SPECIALIX=m +CONFIG_SX=m +CONFIG_RIO=m +# CONFIG_RIO_OLDPCI is not set +CONFIG_STALDRV=y +CONFIG_STALLION=m +CONFIG_ISTALLION=m +CONFIG_NOZOMI=m + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_JSM=m +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_PRINTER=m +CONFIG_LP_CONSOLE=y +CONFIG_PPDEV=m +CONFIG_HVC_DRIVER=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=m +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_INTEL=m +CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_NVRAM=m +CONFIG_R3964=m +CONFIG_APPLICOM=m + +# +# PCMCIA character devices +# +CONFIG_SYNCLINK_CS=m +CONFIG_CARDMAN_4000=m +CONFIG_CARDMAN_4040=m +CONFIG_IPWIRELESS=m +CONFIG_MWAVE=m +CONFIG_PC8736x_GPIO=m +CONFIG_NSC_GPIO=m +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +CONFIG_HANGCHECK_TIMER=m +CONFIG_TCG_TPM=m +# CONFIG_TCG_TIS is not set +# CONFIG_TCG_NSC is not set +CONFIG_TCG_ATMEL=m +# CONFIG_TCG_INFINEON is not set +CONFIG_TELCLOCK=m +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +CONFIG_I2C_ALI1535=m +CONFIG_I2C_ALI1563=m +CONFIG_I2C_ALI15X3=m +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD756_S4882=m +CONFIG_I2C_AMD8111=m +CONFIG_I2C_I801=m +CONFIG_I2C_ISCH=m +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_NFORCE2_S4985=m +CONFIG_I2C_SIS5595=m +CONFIG_I2C_SIS630=m +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=m +CONFIG_I2C_OCORES=m +CONFIG_I2C_SIMTEC=m + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_PARPORT=m +CONFIG_I2C_PARPORT_LIGHT=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m + +# +# Graphics adapter I2C/DDC channel drivers +# +CONFIG_I2C_VOODOO3=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_STUB=m + +# +# Miscellaneous I2C Chip support +# +CONFIG_DS1682=m +CONFIG_SENSORS_MAX6875=m +CONFIG_SENSORS_TSL2550=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +CONFIG_GPIO_MAX732X=m +CONFIG_GPIO_PCA953X=m +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +CONFIG_W1_MASTER_MATROX=m +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +CONFIG_W1_MASTER_GPIO=m + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +CONFIG_W1_SLAVE_DS2433_CRC=y +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=m +CONFIG_WM8350_POWER=m +CONFIG_BATTERY_DS2760=m +CONFIG_BATTERY_BQ27x00=m +CONFIG_CHARGER_PCF50633=m +CONFIG_HWMON=m +CONFIG_HWMON_VID=m +CONFIG_SENSORS_ABITUGURU=m +CONFIG_SENSORS_ABITUGURU3=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7473=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_ASB100=m +CONFIG_SENSORS_ATK0110=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_FSCHER=m +CONFIG_SENSORS_FSCPOS=m +CONFIG_SENSORS_FSCHMD=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_CORETEMP=m +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SIS5595=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_HDAPS=m +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_APPLESMC=m +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=m +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_WM8350_WATCHDOG=m +CONFIG_ACQUIRE_WDT=m +CONFIG_ADVANTECH_WDT=m +CONFIG_ALIM1535_WDT=m +CONFIG_ALIM7101_WDT=m +CONFIG_SC520_WDT=m +CONFIG_EUROTECH_WDT=m +CONFIG_IB700_WDT=m +CONFIG_IBMASR=m +CONFIG_WAFER_WDT=m +CONFIG_I6300ESB_WDT=m +CONFIG_ITCO_WDT=m +CONFIG_ITCO_VENDOR_SUPPORT=y +CONFIG_IT8712F_WDT=m +CONFIG_IT87_WDT=m +CONFIG_HP_WATCHDOG=m +CONFIG_SC1200_WDT=m +CONFIG_PC87413_WDT=m +CONFIG_60XX_WDT=m +CONFIG_SBC8360_WDT=m +CONFIG_CPU5_WDT=m +CONFIG_SMSC_SCH311X_WDT=m +CONFIG_SMSC37B787_WDT=m +CONFIG_W83627HF_WDT=m +CONFIG_W83697HF_WDT=m +CONFIG_W83697UG_WDT=m +CONFIG_W83877F_WDT=m +CONFIG_W83977F_WDT=m +CONFIG_MACHZ_WDT=m +CONFIG_SBC_EPX_C3_WATCHDOG=m + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m +CONFIG_WDT_501_PCI=y + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +CONFIG_SSB_PCMCIAHOST=y +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=m +# CONFIG_MFD_SM501 is not set +CONFIG_HTC_PASIC3=m +CONFIG_UCB1400_CORE=m +CONFIG_TPS65010=m +# CONFIG_MFD_TMIO is not set +CONFIG_MFD_WM8400=m +CONFIG_MFD_WM8350=m +CONFIG_MFD_WM8350_I2C=m +CONFIG_MFD_PCF50633=m +CONFIG_PCF50633_ADC=m +CONFIG_PCF50633_GPIO=m +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +CONFIG_VIDEO_IR_I2C=m + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_TDA9840=m +CONFIG_VIDEO_TDA9875=m +CONFIG_VIDEO_TEA6415C=m +CONFIG_VIDEO_TEA6420=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_M52790=m +CONFIG_VIDEO_TLV320AIC23B=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +CONFIG_VIDEO_BT819=m +CONFIG_VIDEO_BT856=m +CONFIG_VIDEO_BT866=m +CONFIG_VIDEO_KS0127=m +CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_TCM825X=m +CONFIG_VIDEO_SAA7110=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_SAA7191=m +CONFIG_VIDEO_TVP514X=m +CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_VPX3220=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_CX25840=m + +# +# MPEG video encoders +# +CONFIG_VIDEO_CX2341X=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m +CONFIG_VIDEO_SAA7185=m +CONFIG_VIDEO_ADV7170=m +CONFIG_VIDEO_ADV7175=m + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_BT848=m +CONFIG_VIDEO_BT848_DVB=y +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_PP=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_CPIA2=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_ZR36060=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_ZORAN_AVS6EYES=m +CONFIG_VIDEO_MEYE=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +CONFIG_VIDEO_CX88_MPEG=m +CONFIG_VIDEO_CX88_VP3054=m +CONFIG_VIDEO_CX23885=m +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_IVTV=m +CONFIG_VIDEO_FB_IVTV=m +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_TW9910=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_SOC_CAMERA_OV772X=m +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +CONFIG_USB_ET61X251=m +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_ZC0301=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_GEMTEK_PCI=m +CONFIG_RADIO_MAXIRADIO=m +CONFIG_RADIO_MAESTRO=m +CONFIG_USB_DSBR=m +CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m +CONFIG_RADIO_TEA5764=m +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_AV7110=m +CONFIG_DVB_AV7110_OSD=y +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_DVB_SIANO_SMS1XXX=m +CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y + +# +# Supported FlexCopII (B2C2) Adapters +# +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set + +# +# Supported BT878 Adapters +# +CONFIG_DVB_BT8XX=m + +# +# Supported Pluto2 Adapters +# +CONFIG_DVB_PLUTO2=m + +# +# Supported SDMC DM1105 Adapters +# +CONFIG_DVB_DM1105=m + +# +# Supported FireWire (IEEE 1394) Adapters +# +CONFIG_DVB_FIREDTV=m +CONFIG_DVB_FIREDTV_IEEE1394=y +CONFIG_DVB_FIREDTV_INPUT=y + +# +# Supported DVB Frontends +# +CONFIG_DVB_FE_CUSTOMISE=y + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRX397XD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3304=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=m +CONFIG_AGP_SIS=m +CONFIG_AGP_VIA=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_I810=m +CONFIG_DRM_I830=m +CONFIG_DRM_I915=m +# CONFIG_DRM_I915_KMS is not set +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +CONFIG_DRM_VIA=m +CONFIG_DRM_SAVAGE=m +CONFIG_VGASTATE=m +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_DDC=m +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_HECUBA=m +CONFIG_FB_SVGALIB=m +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +CONFIG_FB_CIRRUS=m +CONFIG_FB_PM2=m +# CONFIG_FB_PM2_FIFO_DISCONNECT is not set +CONFIG_FB_CYBER2000=m +CONFIG_FB_ARC=m +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_VGA16=m +# CONFIG_FB_UVESA is not set +CONFIG_FB_VESA=y +CONFIG_FB_N411=m +CONFIG_FB_HGA=m +# CONFIG_FB_HGA_ACCEL is not set +CONFIG_FB_S1D13XXX=m +CONFIG_FB_NVIDIA=m +CONFIG_FB_NVIDIA_I2C=y +# CONFIG_FB_NVIDIA_DEBUG is not set +CONFIG_FB_NVIDIA_BACKLIGHT=y +CONFIG_FB_RIVA=m +CONFIG_FB_RIVA_I2C=y +# CONFIG_FB_RIVA_DEBUG is not set +CONFIG_FB_RIVA_BACKLIGHT=y +CONFIG_FB_LE80578=m +CONFIG_FB_CARILLO_RANCH=m +CONFIG_FB_INTEL=m +# CONFIG_FB_INTEL_DEBUG is not set +CONFIG_FB_INTEL_I2C=y +CONFIG_FB_MATROX=m +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_MATROX_I2C=m +CONFIG_FB_MATROX_MAVEN=m +CONFIG_FB_MATROX_MULTIHEAD=y +CONFIG_FB_RADEON=m +CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +CONFIG_FB_ATY128=m +CONFIG_FB_ATY128_BACKLIGHT=y +CONFIG_FB_ATY=m +CONFIG_FB_ATY_CT=y +CONFIG_FB_ATY_GENERIC_LCD=y +CONFIG_FB_ATY_GX=y +CONFIG_FB_ATY_BACKLIGHT=y +CONFIG_FB_S3=m +CONFIG_FB_SAVAGE=m +CONFIG_FB_SAVAGE_I2C=y +CONFIG_FB_SAVAGE_ACCEL=y +CONFIG_FB_SIS=m +CONFIG_FB_SIS_300=y +CONFIG_FB_SIS_315=y +CONFIG_FB_VIA=m +CONFIG_FB_NEOMAGIC=m +CONFIG_FB_KYRO=m +CONFIG_FB_3DFX=m +# CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y +CONFIG_FB_VOODOO1=m +CONFIG_FB_VT8623=m +CONFIG_FB_TRIDENT=m +CONFIG_FB_ARK=m +CONFIG_FB_PM3=m +CONFIG_FB_CARMINE=m +CONFIG_FB_CARMINE_DRAM_EVAL=y +# CONFIG_CARMINE_DRAM_CUSTOM is not set +CONFIG_FB_GEODE=y +CONFIG_FB_GEODE_LX=m +CONFIG_FB_GEODE_GX=m +CONFIG_FB_GEODE_GX1=m +CONFIG_FB_TMIO=m +CONFIG_FB_TMIO_ACCELL=y +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_METRONOME=m +CONFIG_FB_MB862XX=m +CONFIG_FB_MB862XX_PCI_GDC=y +CONFIG_FB_BROADSHEET=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_PLATFORM=m +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PROGEAR=m +CONFIG_BACKLIGHT_CARILLO_RANCH=m +CONFIG_BACKLIGHT_MBP_NVIDIA=m +CONFIG_BACKLIGHT_SAHARA=m + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=m + +# +# Display hardware drivers +# + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_MTS64=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_PORTMAN2X4=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 +CONFIG_SND_SB_COMMON=m +CONFIG_SND_SB16_DSP=m +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +CONFIG_SND_ALS300=m +CONFIG_SND_ALS4000=m +CONFIG_SND_ALI5451=m +CONFIG_SND_ATIIXP=m +CONFIG_SND_ATIIXP_MODEM=m +CONFIG_SND_AU8810=m +CONFIG_SND_AU8820=m +CONFIG_SND_AU8830=m +CONFIG_SND_AW2=m +CONFIG_SND_AZT3328=m +CONFIG_SND_BT87X=m +# CONFIG_SND_BT87X_OVERCLOCK is not set +CONFIG_SND_CA0106=m +CONFIG_SND_CMIPCI=m +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +CONFIG_SND_CS4281=m +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CS5530=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1X=m +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +CONFIG_SND_ES1938=m +CONFIG_SND_ES1968=m +CONFIG_SND_FM801=m +CONFIG_SND_FM801_TEA575X_BOOL=y +CONFIG_SND_FM801_TEA575X=m +CONFIG_SND_HDA_INTEL=m +CONFIG_SND_HDA_HWDEP=y +# CONFIG_SND_HDA_RECONFIG is not set +# CONFIG_SND_HDA_INPUT_BEEP is not set +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_NVHDMI=y +CONFIG_SND_HDA_CODEC_INTELHDMI=y +CONFIG_SND_HDA_ELD=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +CONFIG_SND_HDSP=m +CONFIG_SND_HDSPM=m +CONFIG_SND_HIFIER=m +CONFIG_SND_ICE1712=m +CONFIG_SND_ICE1724=m +CONFIG_SND_INTEL8X0=m +CONFIG_SND_INTEL8X0M=m +CONFIG_SND_KORG1212=m +CONFIG_SND_MAESTRO3=m +CONFIG_SND_MIXART=m +CONFIG_SND_NM256=m +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +CONFIG_SND_RME32=m +CONFIG_SND_RME96=m +CONFIG_SND_RME9652=m +CONFIG_SND_SONICVIBES=m +CONFIG_SND_TRIDENT=m +CONFIG_SND_VIA82XX=m +CONFIG_SND_VIA82XX_MODEM=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_VX222=m +CONFIG_SND_YMFPCI=m +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_USX2Y=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_US122L=m +CONFIG_SND_PCMCIA=y +CONFIG_SND_VXPOCKET=m +CONFIG_SND_PDAUDIOCF=m +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_DRAGONRISE_FF=m +CONFIG_HID_EZKEY=m +CONFIG_HID_KYE=m +CONFIG_HID_GYRATION=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LOGITECH=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_GREENASIA_FF=m +CONFIG_HID_TOPSEED=m +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_C67X00_HCD=m +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_OXU210HP_HCD=m +CONFIG_USB_ISP116X_HCD=m +CONFIG_USB_ISP1760_HCD=m +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD_SSB=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +CONFIG_USB_U132_HCD=m +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB port drivers +# +CONFIG_USB_USS720=m +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_VST=m +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=m +CONFIG_NOP_USB_XCEIV=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_WLP=m +CONFIG_UWB_I1480U=m +CONFIG_UWB_I1480U_WLP=m +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=m +CONFIG_MMC_WBSD=m +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_SDRICOH_CS=m +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +CONFIG_LEDS_ALIX2=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_CLEVO_MAIL=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_WM8350=m +CONFIG_LEDS_BD2802=m + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +CONFIG_INFINIBAND_IPATH=m +CONFIG_INFINIBAND_AMSO1100=m +# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set +# CONFIG_INFINIBAND_CXGB3 is not set +CONFIG_MLX4_INFINIBAND=m +CONFIG_INFINIBAND_NES=m +# CONFIG_INFINIBAND_NES_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_CM is not set +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_ISER=m +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_TEST=m + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_WM8350=m +CONFIG_RTC_DRV_PCF50633=m + +# +# on-CPU RTC drivers +# +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=m +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y +# CONFIG_ASYNC_TX_DMA is not set +CONFIG_DMATEST=m +CONFIG_DCA=m +CONFIG_AUXDISPLAY=y +# CONFIG_KS0108 is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_SMX=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_SLICOSS is not set +# CONFIG_SXG is not set +# CONFIG_ME4000 is not set +# CONFIG_MEILHAUS is not set +# CONFIG_VIDEO_GO7007 is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_USB_ATMEL is not set +# CONFIG_POCH is not set +# CONFIG_AGNX is not set +# CONFIG_OTUS is not set +CONFIG_RT2860=m +CONFIG_RT2870=m +CONFIG_RT3070=m +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_PANEL is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +CONFIG_RTL8187SE=m +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_ANDROID_BINDER_IPC is not set +# CONFIG_ANDROID_LOGGER is not set +# CONFIG_ANDROID_RAM_CONSOLE is not set +# CONFIG_ANDROID_TIMED_GPIO is not set +# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set +CONFIG_DST=m +# CONFIG_DST_DEBUG is not set +CONFIG_POHMELFS=m +# CONFIG_POHMELFS_DEBUG is not set +# CONFIG_POHMELFS_CRYPTO is not set +CONFIG_USB_SERIAL_ATEN2011=m +CONFIG_B3DFG=m +CONFIG_IDE_PHISON=m +CONFIG_PLAN9AUTH=m +CONFIG_HECI=m +CONFIG_LINE6_USB=m +CONFIG_USB_SERIAL_QUATECH_ESU100=m +CONFIG_X86_PLATFORM_DEVICES=y +CONFIG_ACER_WMI=m +CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_WMI=m +CONFIG_FUJITSU_LAPTOP=m +# CONFIG_FUJITSU_LAPTOP_DEBUG is not set +CONFIG_HP_WMI=m +CONFIG_MSI_LAPTOP=m +CONFIG_PANASONIC_LAPTOP=m +CONFIG_COMPAL_LAPTOP=m +CONFIG_SONY_LAPTOP=m +CONFIG_SONYPI_COMPAT=y +CONFIG_THINKPAD_ACPI=m +# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set +# CONFIG_THINKPAD_ACPI_DEBUG is not set +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set +CONFIG_THINKPAD_ACPI_VIDEO=y +CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y +CONFIG_INTEL_MENLOW=m +CONFIG_EEEPC_LAPTOP=m +CONFIG_ACPI_WMI=m +CONFIG_ACPI_ASUS=m +CONFIG_ACPI_TOSHIBA=m + +# +# Firmware Drivers +# +CONFIG_EDD=m +# CONFIG_EDD_OFF is not set +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_DELL_RBU=m +CONFIG_DCDBAS=m +CONFIG_DMIID=y +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=m + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +# CONFIG_GFS2_FS_LOCKING_DLM is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_OCFS2_FS_POSIX_ACL=y +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y + +# +# Caches +# +CONFIG_FSCACHE=m +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +# CONFIG_ECRYPT_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_NILFS2_FS=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_FSCACHE is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_SPKM3=m +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_SMALLDOS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +# CONFIG_AFS_FSCACHE is not set +CONFIG_9P_FS=m + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_SOLARIS_X86_PARTITION=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_KARMA_PARTITION=y +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=0 +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_STACKTRACE=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_SYSPROF_TRACER=y +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_EVENT_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_POWER_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_STRICT_DEVMEM=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_DBGP is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_OPTIMIZE_INLINING is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_WP512=y + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y +CONFIG_CRYPTO_ANUBIS=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=y +CONFIG_CRYPTO_CAMELLIA=y +CONFIG_CRYPTO_CAST5=y +CONFIG_CRYPTO_CAST6=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y +CONFIG_CRYPTO_KHAZAD=y +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SALSA20_X86_64=m +CONFIG_CRYPTO_SEED=y +CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_TEA=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y +CONFIG_CRYPTO_TWOFISH_X86_64=y + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_ZLIB=y +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_HIFN_795X=m +CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +CONFIG_KVM_INTEL=m +CONFIG_KVM_AMD=m +# CONFIG_KVM_TRACE is not set +CONFIG_VIRTIO=m +CONFIG_VIRTIO_RING=m +CONFIG_VIRTIO_PCI=m +CONFIG_VIRTIO_BALLOON=m +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_REED_SOLOMON=m +CONFIG_REED_SOLOMON_DEC16=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_CHECK_SIGNATURE=y +CONFIG_NLATTR=y |