7 files changed, 235 insertions, 0 deletions
diff --git a/source/n/dhcpcd/COPYRIGHT b/source/n/dhcpcd/COPYRIGHT
new file mode 100644
index 00000000..07d9e683
--- /dev/null
+++ b/source/n/dhcpcd/COPYRIGHT
@@ -0,0 +1,26 @@
+/*
+ * dhcpcd - DHCP client daemon
+ * Copyright 2006-2008 Roy Marples <roy@marples.name>
+ * All rights reserved
+
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
diff --git a/source/n/dhcpcd/dhcpcd.SlackBuild b/source/n/dhcpcd/dhcpcd.SlackBuild
new file mode 100755
index 00000000..40911874
--- /dev/null
+++ b/source/n/dhcpcd/dhcpcd.SlackBuild
@@ -0,0 +1,114 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-3.2.3}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-dhcpcd
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf dhcpcd-$VERSION
+tar xvf $CWD/dhcpcd-$VERSION.tar.bz2 || exit 1
+cd dhcpcd-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# This changes the default locations where *.pid and other files are
+# written - instead of various locations, use /etc/dhcpc
+# The latter directory was long traditional, and (more importantly) 
+# you can't be sure that /var is mounted yet when dhcpcd is invoked.
+zcat $CWD/patches/config.h.diff.gz | patch -p1 || exit 1
+
+# Fixup the sample dhcpcd.sh script to reflect our changes
+zcat $CWD/patches/dhcpcd.sh.diff.gz | patch -p1 || exit 1
+
+# Fix a typo in the manpage
+zcat $CWD/patches/dhcpcd.8.in.diff.gz | patch -p1 || exit 1
+
+# Disable zeroconf support
+# I'm not sure if this is necessary, to be honest.  If we do this though,
+# I think we'll want to edit the man page to remove references to it.
+#sed -i 's%#define ENABLE_IPV4LL%#undef ENABLE_IPV4LL%' config.h
+
+# Fix segfaulting on x86_64. Apparently i?86 is more forgiving
+#zcat $CWD/dhcpcd.vararg.diff.gz | patch -p1 --verbose || exit 1
+
+CFLAGS="$SLKCFLAGS" \
+  make INFODIR=/etc/dhcpc || exit 1
+
+# We'll install this manually, as the only thing "make install" actually
+# installs is the executable and the man page, and the man page goes to
+# the wrong place :-)
+mkdir -p $PKG/sbin
+cp -a dhcpcd $PKG/sbin
+
+mkdir -p $PKG/usr/man/man8
+gzip -9c dhcpcd.8 > $PKG/usr/man/man8/dhcpcd.8.gz
+
+# This script (or its equivalent) has been installed non-executable for 
+# several dhcpcd releases leading me to believe this is intentional on the 
+# part of the developers.  Indeed, the script is called a "sample" in the 
+# included comments, and there's been at least one security issue related 
+# to its use in the past, so it's probably a safer bet to not install it so 
+# that it works "out of the box".  However, making it non-executable is not 
+# the best solution for this as it leads to error messages in the system 
+# logs which I hear about from time to time.  Instead, we'll make it 
+# executable, but will give it a suffix of -sample so that dhcpcd won't 
+# attempt to run it unless the admin specifically configure it to do so.
+# As far as I can tell it does nothing more than add some extra verbosity 
+# to the logs anyway, and rc.inet1 already does that.  There's really no
+# need that I can see to enable the script.
+mkdir -p $PKG/etc/dhcpc
+cp -a dhcpcd.sh $PKG/etc/dhcpc/dhcpcd.sh-sample
+chmod 755 $PKG/etc/dhcpc/dhcpcd.sh-sample
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/dhcpcd-$VERSION
+cp -a README $PKG/usr/doc/dhcpcd-$VERSION
+zcat $CWD/COPYRIGHT.gz > $PKG/usr/doc/dhcpcd-$VERSION/COPYRIGHT
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/dhcpcd-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/dhcpcd/dhcpcd.vararg.diff b/source/n/dhcpcd/dhcpcd.vararg.diff
new file mode 100644
index 00000000..b3ac81ca
--- /dev/null
+++ b/source/n/dhcpcd/dhcpcd.vararg.diff
@@ -0,0 +1,30 @@
+--- dhcpcd-2.0.8.orig/src/logger.c	2008-11-07 00:10:23.000000000 +0000
++++ dhcpcd-2.0.8/src/logger.c	2008-11-07 00:13:46.000000000 +0000
+@@ -46,21 +46,25 @@
+ {
+   va_list p;
+   va_list p2;
++  va_list p3;
+   FILE *f = stderr;
+ 
+   va_start(p, fmt);
+   va_copy(p2, p);
++  va_copy(p3, p);
+   /* The default to send debug to stderr is just WAY too much console noise, IMHO */
+   if(!Daemonized && strcmp(syslog_level_msg[level],"Info")) {
+         f = stdout;
+         /* fprintf(f, "%s, ", syslog_level_msg[level]); */
+ 	vfprintf(f, fmt, p);
+ 	fputc('\n', f);
+-	vsyslog(level, fmt, p);
++	vsyslog(level, fmt, p2);
+   }
+   if ( level <= LogLevel )
+-	vsyslog(level, fmt, p2);
++	vsyslog(level, fmt, p3);
+   va_end(p);
++  va_end(p2);
++  va_end(p3);
+ }
+ 
+ // vim: set ts=4 :
diff --git a/source/n/dhcpcd/patches/config.h.diff b/source/n/dhcpcd/patches/config.h.diff
new file mode 100644
index 00000000..7bdefb60
--- /dev/null
+++ b/source/n/dhcpcd/patches/config.h.diff
@@ -0,0 +1,17 @@
+diff -Nur dhcpcd-3.2.3.orig/config.h dhcpcd-3.2.3/config.h
+--- dhcpcd-3.2.3.orig/config.h	2008-02-25 02:28:19.000000000 -0600
++++ dhcpcd-3.2.3/config.h	2009-03-06 14:55:01.998436374 -0600
+@@ -71,10 +71,10 @@
+ 
+ #define OPENNTPFILE         ETCDIR "/ntpd.conf"
+ 
+-#define DEFAULT_SCRIPT      ETCDIR "/" PACKAGE ".sh"
++#define DEFAULT_SCRIPT      INFODIR "/" PACKAGE ".sh"
+ 
+-#define STATEDIR            "/var"
+-#define PIDFILE             STATEDIR "/run/" PACKAGE "-%s.pid"
++#define STATEDIR            INFODIR
++#define PIDFILE             INFODIR "/" PACKAGE "-%s.pid"
+ 
+ #ifndef INFODIR
+ # define INFODIR            "/var/lib/dhcpcd"
diff --git a/source/n/dhcpcd/patches/dhcpcd.8.in.diff b/source/n/dhcpcd/patches/dhcpcd.8.in.diff
new file mode 100644
index 00000000..7486c769
--- /dev/null
+++ b/source/n/dhcpcd/patches/dhcpcd.8.in.diff
@@ -0,0 +1,12 @@
+diff -Nur dhcpcd-3.2.3.orig/dhcpcd.8.in dhcpcd-3.2.3/dhcpcd.8.in
+--- dhcpcd-3.2.3.orig/dhcpcd.8.in	2008-02-25 02:28:19.000000000 -0600
++++ dhcpcd-3.2.3/dhcpcd.8.in	2009-03-06 19:36:02.207109931 -0600
+@@ -117,7 +117,7 @@
+ up, down or new depending on the state of
+ .Nm .
+ .Nm
+-ignores the exist code of the script.
++ignores the exit code of the script.
+ .Ss Fine tuning
+ You can fine tune the behaviour of
+ .Nm
diff --git a/source/n/dhcpcd/patches/dhcpcd.sh.diff b/source/n/dhcpcd/patches/dhcpcd.sh.diff
new file mode 100644
index 00000000..290665a9
--- /dev/null
+++ b/source/n/dhcpcd/patches/dhcpcd.sh.diff
@@ -0,0 +1,17 @@
+--- a/dhcpcd.sh	2009-03-06 19:22:41.247171672 -0600
++++ b/dhcpcd.sh	2009-03-06 19:24:19.186014526 -0600
+@@ -1,10 +1,10 @@
+ #!/bin/sh
+ #
+-#  This is a sample /etc/dhcpcd.sh script.
+-#  /etc/dhcpcd.sh script is executed by dhcpcd daemon
++#  This is a sample /etc/dhcpc/dhcpcd.sh script.
++#  /etc/dhcpc/dhcpcd.sh script is executed by dhcpcd daemon
+ #  any time it configures or shuts down interface.
+-#  The following parameters are passed to dhcpcd.exe script:
+-#  $1 = HostInfoFilePath, e.g  "/var/lib/dhcpcd/dhcpcd-eth0.info"
++#  The following parameters are passed to the dhcpcd.sh script:
++#  $1 = HostInfoFilePath, e.g  "/etc/dhcpc/dhcpcd-eth0.info"
+ #  $2 = "up" if interface has been configured with the same
+ #       IP address as before reboot;
+ #  $2 = "down" if interface has been shut down;
diff --git a/source/n/dhcpcd/slack-desc b/source/n/dhcpcd/slack-desc
new file mode 100644
index 00000000..04859d7c
--- /dev/null
+++ b/source/n/dhcpcd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+dhcpcd: dhcpcd (DHCP client daemon)
+dhcpcd:
+dhcpcd: The DHCP client program dhcpcd is used to connect to a network by
+dhcpcd: contacting a DHCP server.  dhcpcd gets an IP address and other
+dhcpcd: information from a corresponding DHCP server, configures the network
+dhcpcd: interface automatically, and tries to renew the lease time according
+dhcpcd: to RFC2131 or RFC1541 depending on the command line option.
+dhcpcd:
+dhcpcd:
+dhcpcd:
+dhcpcd: