diff options
Diffstat (limited to 'source/ap/squashfs-tools/squashfs-tools.SlackBuild')
| -rwxr-xr-x | source/ap/squashfs-tools/squashfs-tools.SlackBuild | 282 |
1 files changed, 105 insertions, 177 deletions
diff --git a/source/ap/squashfs-tools/squashfs-tools.SlackBuild b/source/ap/squashfs-tools/squashfs-tools.SlackBuild index 39c425c4..67871e9f 100755 --- a/source/ap/squashfs-tools/squashfs-tools.SlackBuild +++ b/source/ap/squashfs-tools/squashfs-tools.SlackBuild @@ -1,202 +1,130 @@ -#!/bin/sh -# $Id: squashfs-tools.SlackBuild,v 1.1 2015/10/21 09:33:53 root Exp root $ +#!/bin/bash + # Copyright 2015 Eric Hameleers, Eindhoven, NL +# Copyright 2017, 2018 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # -# Permission to use, copy, modify, and distribute this software for -# any purpose with or without fee is hereby granted, provided that -# the above copyright notice and this permission notice appear in all -# copies. -# -# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# ----------------------------------------------------------------------------- +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: # -# Slackware SlackBuild script -# =========================== -# By: Eric Hameleers <alien@slackware.com> -# For: squashfs-tools -# Descr: Tools for handling squashed read-only filesystem for Linux -# URL: http://squashfs.sourceforge.net/ -# Build needs: -# Needs: -# Changelog: -# 4.3-1: 20/Oct/2015 by Eric Hameleers <alien@slackware.com> -# * Initial build. -# -# Run 'sh squashfs-tools.SlackBuild' to build a Slackware package. -# The package (.t?z) and .txt file as well as build logs are created in /tmp . -# Install the package using 'installpkg' or 'upgradepkg --install-new'. +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. # -# ----------------------------------------------------------------------------- - -PRGNAM=squashfs-tools -SRCNAM=squashfs -VERSION=${VERSION:-4.3} -BUILD=${BUILD:-1} -TAG=${TAG:-} - -DOCS="ACKNOWLEDGEMENTS CHANGES COPYING DONATIONS INSTALL \ - README* PERFORMANCE.README *.example" - -# Where do we look for sources? -SRCDIR=$(cd $(dirname $0); pwd) - -# Place to build (TMP) package (PKG) and output (OUTPUT) the program: -TMP=${TMP:-/tmp/build} -PKG=$TMP/package-$PRGNAM -OUTPUT=${OUTPUT:-/tmp} - -SOURCE="$SRCDIR/${SRCNAM}${VERSION}.tar.gz" -SRCURL="http://downloads.sourceforge.net/project/${SRCNAM}/${SRCNAM}/${SRCNAM}${VERSION}/${SRCNAM}${VERSION}.tar.gz" - -## -## --- with a little luck, you won't have to edit below this point --- ## -## - -# You can use your own private machine.conf file to overrule machine defaults: -if [ -e $SRCDIR/machine.conf ]; then - . $SRCDIR/machine.conf -elif [ -e /etc/slackbuild/machine.conf ]; then - . /etc/slackbuild/machine.conf -else - # Automatically determine the architecture we're building on: - MARCH=$( uname -m ) - if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i586 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac - fi - # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: - case "$ARCH" in - i586) SLKCFLAGS="-O2 -march=i586 -mtune=i686" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; - x86_64) SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64" - ;; - armv7hl) SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; - *) SLKCFLAGS=${SLKCFLAGS:-"O2"} - SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""} - ;; +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PKGNAM=squashfs-tools +VERSION=${VERSION:-$(echo squashfs*.tar.xz | cut -b9- | rev | cut -f3- -d . | rev)} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$(uname -m)" in + i?86) ARCH=i586 ;; + arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) ARCH=$(uname -m) ;; esac + export ARCH fi -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - -# Exit the script on errors: -set -e -trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR -# Catch unitialized variables: -set -u -P1=${1:-1} - -# Save old umask and set to 0022: -_UMASK_=$(umask) -umask 0022 - -# Create working directories: -mkdir -p $OUTPUT # place for the package to be saved -mkdir -p $TMP/tmp-$PRGNAM # location to build the source -mkdir -p $PKG # place for the package to be built -rm -rf $PKG/* # always erase old package's contents -rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build -rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log - # remove old log files - -# Source file availability: -if ! [ -f ${SOURCE} ]; then - echo "Source '$(basename ${SOURCE})' not available yet..." - # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT - [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)" - if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi - if ! [ "x${SRCURL}" == "x" ]; then - echo "Will download file to $(dirname $SOURCE)" - wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true - if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then - echo "Downloading '$(basename ${SOURCE})' failed... aborting the build." - mv -f "${SOURCE}" "${SOURCE}".FAIL - exit 1 - fi - else - echo "File '$(basename ${SOURCE})' not available... aborting the build." - exit 1 - fi +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" + exit 0 fi -if [ "$P1" == "--download" ]; then - echo "Download complete." - exit 0 +NUMJOBS=${NUMJOBS:-" -j7 "} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +elif [ "$ARCH" = "armv7hl" ]; then + SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16" + LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi -# --- PACKAGE BUILDING --- +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM -echo "++" -echo "|| $PRGNAM-$VERSION" -echo "++" +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +rm -rf squashfs${VERSION} +tar xvf $CWD/squashfs${VERSION}.tar.xz || exit 1 +cd squashfs${VERSION} || exit 1 + +zcat $CWD/0001-kfreebsd.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0002-fix_phys_mem_calculation.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0003-CVE-2015-4645_and_CVE-2015-4646.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0004-unsquashfs-add-support-for-LZMA-magics.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0006-uptream-fix-race.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0007-fix-2GB-limit-in-mksquashfs.patch.gz | patch -p1 --verbose || exit 1 -cd $TMP/tmp-$PRGNAM -echo "Extracting the source archive(s) for $PRGNAM..." -tar -xvf ${SOURCE} -cd ${SRCNAM}${VERSION} chown -R root:root . -chmod -R u+w,go+r-w,a+rX-st . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; -echo Building ... -LDFLAGS="$SLKLDFLAGS" \ +cd squashfs-tools || exit 1 + +# Build: CFLAGS="$SLKCFLAGS" \ -make -C $PRGNAM \ +make $NUMJOBS \ GZIP_SUPPORT="1" \ XZ_SUPPORT="1" \ LZO_SUPPORT="1" \ LZMA_XZ_SUPPORT="1" \ - COMP_DEFAULT="xz" \ - 2>&1 | tee $OUTPUT/make-${PRGNAM}.log -make install -C $PRGNAM INSTALL_DIR=$PKG/usr/bin \ - 2>&1 | tee $OUTPUT/install-${PRGNAM}.log - -# Add documentation: -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true -cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild -chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION -find $PKG/usr/doc -type f -exec chmod 644 {} \; - -# Strip binaries (if any): -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -# Add a package description: + COMP_DEFAULT="xz" || exit 1 + +# Install: +make install INSTALL_DIR=$PKG/usr/bin || exit 1 + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +( cd .. + cp -a \ + ACKNOWLEDGEMENTS CHANGES COPYING DONATIONS INSTALL \ + README* PERFORMANCE.README *.example \ + $PKG/usr/doc/${PKGNAM}-$VERSION +) + mkdir -p $PKG/install -cat $SRCDIR/slack-desc > $PKG/install/slack-desc +cat $CWD/slack-desc > $PKG/install/slack-desc -# Build the package: cd $PKG -makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log -cd $OUTPUT -md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5 -cd - -cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt - -# Restore the original umask: -umask ${_UMASK_} +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz |