diff options
Diffstat (limited to 'source/a/eudev')
30 files changed, 1019 insertions, 0 deletions
diff --git a/source/a/eudev/0001-Remove-obsolete-udev_root-references.patch b/source/a/eudev/0001-Remove-obsolete-udev_root-references.patch new file mode 100644 index 00000000..e09f82e0 --- /dev/null +++ b/source/a/eudev/0001-Remove-obsolete-udev_root-references.patch @@ -0,0 +1,68 @@ +From 26b8f53163c0efd9c638f9798bb8e36be2a3d719 Mon Sep 17 00:00:00 2001 +From: Robby Workman <rworkman@slackware.com> +Date: Sun, 15 Nov 2015 15:07:37 -0600 +Subject: [PATCH] Remove obsolete udev_root references + +This was removed in 6ada823a9a0979ea145fd70add1007c21caa45c0 +--- + man/udev.7 | 5 ----- + man/udev.xml | 7 ------- + test/udev-test.pl | 8 -------- + 3 files changed, 20 deletions(-) + +diff --git a/man/udev.7 b/man/udev.7 +index b54683d..293f404 100644 +--- a/man/udev.7 ++++ b/man/udev.7 +@@ -515,11 +515,6 @@ The current name of the device\&. If not changed by a rule, it is the name of th + A space\-separated list of the current symlinks\&. The value is only set during a remove event or if an earlier rule assigned a value\&. + .RE + .PP +-\fB$root\fR, \fB%r\fR +-.RS 4 +-The udev_root value\&. +-.RE +-.PP + \fB$sys\fR, \fB%S\fR + .RS 4 + The sysfs mount point\&. +diff --git a/man/udev.xml b/man/udev.xml +index fd7df34..d1ade24 100644 +--- a/man/udev.xml ++++ b/man/udev.xml +@@ -703,13 +703,6 @@ + </varlistentry> + + <varlistentry> +- <term><option>$root</option>, <option>%r</option></term> +- <listitem> +- <para>The udev_root value.</para> +- </listitem> +- </varlistentry> +- +- <varlistentry> + <term><option>$sys</option>, <option>%S</option></term> + <listitem> + <para>The sysfs mount point.</para> +diff --git a/test/udev-test.pl b/test/udev-test.pl +index 14f11df..9a425bb 100755 +--- a/test/udev-test.pl ++++ b/test/udev-test.pl +@@ -889,14 +889,6 @@ SUBSYSTEMS=="scsi", KERNEL=="sda1", SYMLINK+="%P-part-1" + EOF + }, + { +- desc => "udev_root substitution", +- devpath => "/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1", +- exp_name => "start-/dev-end", +- rules => <<EOF +-SUBSYSTEMS=="scsi", KERNEL=="sda1", SYMLINK+="start-%r-end" +-EOF +- }, +- { + desc => "last_rule option", + devpath => "/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1", + exp_name => "last", +-- +2.6.3 + diff --git a/source/a/eudev/0002-src-udev-udevd.c-add-eudev-startup-message-for-kmsg.patch b/source/a/eudev/0002-src-udev-udevd.c-add-eudev-startup-message-for-kmsg.patch new file mode 100644 index 00000000..55e2bccf --- /dev/null +++ b/source/a/eudev/0002-src-udev-udevd.c-add-eudev-startup-message-for-kmsg.patch @@ -0,0 +1,38 @@ +From 71ff5b6886946dacca8ae685ac85cdc174cfdece Mon Sep 17 00:00:00 2001 +From: Richard Narron <richard@aaazen.com> +Date: Sun, 22 Nov 2015 02:27:58 -0500 +Subject: [PATCH 2/2] src/udev/udevd.c: add eudev startup message for kmsg + +Signed-off-by: Anthony G. Basile <blueness@gentoo.org> +--- + src/udev/udevd.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/src/udev/udevd.c b/src/udev/udevd.c +index b1de97a..b3fbc27 100644 +--- a/src/udev/udevd.c ++++ b/src/udev/udevd.c +@@ -1125,6 +1125,7 @@ static int parse_argv(int argc, char *argv[]) { + int main(int argc, char *argv[]) { + struct udev *udev; + sigset_t mask; ++ FILE *f; + int fd_ctrl = -1; + int fd_netlink = -1; + int fd_worker = -1; +@@ -1277,6 +1278,12 @@ int main(int argc, char *argv[]) { + + udev_list_node_init(&event_list); + ++ f = fopen("/dev/kmsg", "w"); ++ if (f != NULL) { ++ fprintf(f, "<30>udevd[%u]: starting eudev-" VERSION "\n", getpid()); ++ fclose(f); ++ } ++ + if (!arg_debug) { + int fd; + +-- +2.6.3 + diff --git a/source/a/eudev/60-cdrom_id.rules.diff b/source/a/eudev/60-cdrom_id.rules.diff new file mode 100644 index 00000000..c785dcca --- /dev/null +++ b/source/a/eudev/60-cdrom_id.rules.diff @@ -0,0 +1,30 @@ +diff -rNaud eudev-3.1.old/rules/60-cdrom_id.rules eudev-3.1/rules/60-cdrom_id.rules +--- eudev-3.1.old/rules/60-cdrom_id.rules 2015-03-19 22:57:28.000000000 +0100 ++++ eudev-3.1/rules/60-cdrom_id.rules 2015-10-24 12:36:13.350966101 +0200 +@@ -20,6 +20,25 @@ + # stale mounts after ejecting + ENV{DISK_MEDIA_CHANGE}=="?*", ENV{ID_CDROM_MEDIA}!="?*", ENV{SYSTEMD_READY}="0" + +-KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100" ++# create default links to the first detected device ++KERNEL=="sr0", ENV{ID_CDROM}=="1", SYMLINK+="cdrom", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_CD_R}=="1", SYMLINK+="cdr", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_CD_R}=="1", SYMLINK+="cdwriter", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_CD_RW}=="1", SYMLINK+="cdrw", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_DVD}=="1", SYMLINK+="dvd", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_DVD_R}=="1", SYMLINK+="dvdr", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_DVD_R}=="1", SYMLINK+="dvdwriter", OPTIONS+="link_priority=-100" ++KERNEL=="sr0", ENV{ID_CDROM_DVD_RW}=="1", SYMLINK+="dvdrw", OPTIONS+="link_priority=-100" ++ ++# create all other device links ++KERNEL=="sr[0-9]*", ENV{ID_CDROM}=="1", SYMLINK+="cdrom%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_CD_R}=="1", SYMLINK+="cdr%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_CD_R}=="1", SYMLINK+="cdwriter%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_CD_RW}=="1", SYMLINK+="cdrw%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_DVD}=="1", SYMLINK+="dvd%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_DVD_R}=="1", SYMLINK+="dvdr%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_DVD_R}=="1", SYMLINK+="dvdwriter%n", OPTIONS+="link_priority=-100" ++KERNEL=="sr[0-9]*", ENV{ID_CDROM_DVD_RW}=="1", SYMLINK+="dvdrw%n", OPTIONS+="link_priority=-100" ++ + + LABEL="cdrom_end" diff --git a/source/a/eudev/config/modprobe.d/8139cp.conf b/source/a/eudev/config/modprobe.d/8139cp.conf new file mode 100644 index 00000000..65f0af0d --- /dev/null +++ b/source/a/eudev/config/modprobe.d/8139cp.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Alternate 8139 driver. Some 8139 cards need this specific driver, though... +blacklist 8139cp + diff --git a/source/a/eudev/config/modprobe.d/README b/source/a/eudev/config/modprobe.d/README new file mode 100644 index 00000000..43355e82 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/README @@ -0,0 +1,11 @@ +# /etc/modprobe.d/README +# +# The monolithic "blacklist" file (and others) that used to be here in this +# directory have been split into several more fine-grained files and moved +# to the /lib/modprobe.d/ directory. Any file in /lib/modprobe.d/ will be +# overridden by an identically named file in this directory (/etc/modprobe.d/) +# or /run/modprobe.d/ (but since /run is on a tmpfs, it's not persistent +# across reboots, so you probably don't want to use it). +# +# See "man modprobe.d" for more information. +# diff --git a/source/a/eudev/config/modprobe.d/bcm43xx.conf b/source/a/eudev/config/modprobe.d/bcm43xx.conf new file mode 100644 index 00000000..55b3c2ab --- /dev/null +++ b/source/a/eudev/config/modprobe.d/bcm43xx.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Deprecated BCM4318 driver. +blacklist bcm43xx + diff --git a/source/a/eudev/config/modprobe.d/eepro100.conf b/source/a/eudev/config/modprobe.d/eepro100.conf new file mode 100644 index 00000000..a7ca4aae --- /dev/null +++ b/source/a/eudev/config/modprobe.d/eepro100.conf @@ -0,0 +1,8 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Alternate Intel EtherExpress Pro/100 support driver. List it +# here so it won't conflict with an already-loaded e100 module. +blacklist eepro100 + diff --git a/source/a/eudev/config/modprobe.d/eth1394.conf b/source/a/eudev/config/modprobe.d/eth1394.conf new file mode 100644 index 00000000..a2f475af --- /dev/null +++ b/source/a/eudev/config/modprobe.d/eth1394.conf @@ -0,0 +1,8 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Ethernet over IEEE1394 module. In too many cases this will load +# when there's no eth1394 device present (just an IEEE1394 port) +blacklist eth1394 + diff --git a/source/a/eudev/config/modprobe.d/evbug.conf b/source/a/eudev/config/modprobe.d/evbug.conf new file mode 100644 index 00000000..0af0a83c --- /dev/null +++ b/source/a/eudev/config/modprobe.d/evbug.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +#evbug is a debug tool and should be loaded explicitly +blacklist evbug + diff --git a/source/a/eudev/config/modprobe.d/framebuffers.conf b/source/a/eudev/config/modprobe.d/framebuffers.conf new file mode 100644 index 00000000..770ce420 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/framebuffers.conf @@ -0,0 +1,48 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Hardware specific video framebuffer modules. If the user wants +# these, they can load them manually or de-blacklist them. Having +# them load automatically may lead to funny side effects with +# certain revisions of video hardware. +blacklist arcfb +blacklist aty128fb +blacklist atyfb +blacklist cirrusfb +blacklist clgenfb +blacklist cyber2000fb +blacklist fbcon-cfb2 +blacklist fbcon-cfb4 +blacklist fbcon-hga +blacklist fbcon-mfb +blacklist fbcon-vga-planes +blacklist fbgen +blacklist hgafb +blacklist i2c-matroxfb +blacklist i810fb +blacklist intelfb +blacklist kyrofb +blacklist matroxfb_DAC1064 +blacklist matroxfb_Ti3026 +blacklist matroxfb_accel +blacklist matroxfb_base +blacklist matroxfb_crtc2 +blacklist matroxfb_g450 +blacklist matroxfb_maven +blacklist matroxfb_misc +blacklist neofb +blacklist nvidiafb +blacklist pm2fb +blacklist pm3fb +blacklist radeonfb +blacklist rivafb +blacklist savagefb +blacklist sisfb +blacklist sstfb +blacklist tdfxfb +blacklist tridentfb +blacklist vga16fb +blacklist viafb +blacklist virgefb + diff --git a/source/a/eudev/config/modprobe.d/hostap.conf b/source/a/eudev/config/modprobe.d/hostap.conf new file mode 100644 index 00000000..4254d3da --- /dev/null +++ b/source/a/eudev/config/modprobe.d/hostap.conf @@ -0,0 +1,12 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Modules used to run a wireless adapter as an access point. These +# conflict with the normal driver for the device, and so should be +# loaded manually. +blacklist hostap_cs +blacklist hostap_pci +blacklist hostap_plx +blacklist hostap + diff --git a/source/a/eudev/config/modprobe.d/hw_random.conf b/source/a/eudev/config/modprobe.d/hw_random.conf new file mode 100644 index 00000000..b912e012 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/hw_random.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# This module has also been known to cause crashes with some hardware. +blacklist hw_random + diff --git a/source/a/eudev/config/modprobe.d/isapnp.conf b/source/a/eudev/config/modprobe.d/isapnp.conf new file mode 100644 index 00000000..a89ad6bb --- /dev/null +++ b/source/a/eudev/config/modprobe.d/isapnp.conf @@ -0,0 +1,24 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# These aliases are here because many PnP modules do not provide them. +# +# NOTE: Commented out due to noise pollution from udev. +# In the unlikely event that your machine needs these aliases, copy this +# file to /etc/modprobe.d/isapnp.conf and uncomment them there. + +#alias pnp:dPNP0400 parport_pc +#alias pnp:dPNP0401 parport_pc +#alias pnp:dPNP0510 irtty-sir +#alias pnp:dPNP0511 irtty-sir +#alias pnp:dPNP0700 floppy +#alias pnp:dPNP0B00 rtc +#alias acpi:PNP0B00: rtc-cmos +#alias acpi:PNP0B01: rtc-cmos +#alias acpi:PNP0B02: rtc-cmos +#alias pnp:dPNPB02F analog +#alias pnp:dPNP0F13 psmouse +#alias pnp:dPNP0800 pcspkr +#alias pnp:dPNP0303 atkbd + diff --git a/source/a/eudev/config/modprobe.d/isdn.conf b/source/a/eudev/config/modprobe.d/isdn.conf new file mode 100644 index 00000000..7f736753 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/isdn.conf @@ -0,0 +1,11 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# These two come from the hwdata project +# Bug numbers are Fedora/RH specific + +# ISDN - see bugs 154799, 159068 +blacklist hisax +blacklist hisax_fcpcipnp + diff --git a/source/a/eudev/config/modprobe.d/oss.conf b/source/a/eudev/config/modprobe.d/oss.conf new file mode 100644 index 00000000..52ed2f59 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/oss.conf @@ -0,0 +1,61 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# OSS (Open Sound System) modules. This is the old and deprecated Linux +# sound system. If you want to use OSS, remove the alsa-driver package +# and cut out (or comment out) this list. With these modules +# blacklisted ALSA will load by default. +blacklist ac97 +blacklist ac97_codec +blacklist aci +blacklist ad1816 +blacklist ad1848 +blacklist ad1889 +blacklist adlib_card +blacklist aedsp16 +blacklist ali5455 +blacklist awe_wave +blacklist btaudio +blacklist cmpci +blacklist cs4232 +blacklist cs4281 +blacklist cs46xx +blacklist emu10k1 +blacklist es1370 +blacklist es1371 +blacklist esssolo1 +blacklist forte +blacklist gus +blacklist i810_audio +blacklist kahlua +blacklist mad16 +blacklist maestro +blacklist maestro3 +blacklist maui +blacklist mpu401 +blacklist msnd +blacklist msnd_classic +blacklist msnd_pinnacle +blacklist nm256_audio +blacklist opl3 +blacklist opl3sa +blacklist opl3sa2 +blacklist pas2 +blacklist pss +blacklist rme96xx +blacklist sb +blacklist sb_lib +blacklist sgalaxy +blacklist sonicvibes +blacklist sound +blacklist sscape +blacklist trident +blacklist trix +blacklist uart401 +blacklist uart6850 +blacklist v_midi +blacklist via82cxxx_audio +blacklist wavefront +blacklist ymfpci + diff --git a/source/a/eudev/config/modprobe.d/pcspkr.conf b/source/a/eudev/config/modprobe.d/pcspkr.conf new file mode 100644 index 00000000..66de6b74 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/pcspkr.conf @@ -0,0 +1,9 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# PC Speaker support: +# This one is loaded by /etc/rc.d/rc.modules. If you don't like +# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules. +blacklist pcspkr + diff --git a/source/a/eudev/config/modprobe.d/psmouse.conf b/source/a/eudev/config/modprobe.d/psmouse.conf new file mode 100644 index 00000000..cc414141 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/psmouse.conf @@ -0,0 +1,10 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# PS/2 mouse support: +# The default options when the psmouse module can cause problems with KVM +# switches. If you experience this, you may want to uncomment the line +# below to use a more basic mouse protocol with the psmouse module: +#options psmouse proto=imps + diff --git a/source/a/eudev/config/modprobe.d/scsi-sata-controllers.conf b/source/a/eudev/config/modprobe.d/scsi-sata-controllers.conf new file mode 100644 index 00000000..61470416 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/scsi-sata-controllers.conf @@ -0,0 +1,81 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# SCSI and SATA controller modules. Typically these are either +# built into the kernel or loaded with an initrd already. +blacklist 3w-xxxx +blacklist 53c7,8xx +blacklist AM53C974 +blacklist BusLogic +blacklist NCR53c406a +blacklist a100u2w +blacklist advansys +blacklist aha152x +blacklist aha1542 +blacklist aha1740 +blacklist aic79xx +blacklist aic7xxx +blacklist aic7xxx_old +blacklist aic94xx +blacklist ata_piix +blacklist atp870u +blacklist cpqfc +blacklist dc395x +blacklist dmx3191d +blacklist dpt_i2o +blacklist dtc +blacklist eata +blacklist eata_dma +blacklist eata_pio +blacklist fdomain +blacklist g_NCR5380 +blacklist g_NCR5380_mmio +blacklist gdth +blacklist ide-scsi +blacklist imm +blacklist in2000 +blacklist initio +blacklist ipr +blacklist ips +blacklist libata +blacklist megaraid +blacklist ncr53c8xx +blacklist nsp32 +blacklist osst +blacklist pas16 +blacklist pci2000 +blacklist pci2220i +blacklist ppa +blacklist psi240i +blacklist qla1280 +blacklist qla2100 +blacklist qla2200 +blacklist qla2300 +blacklist qla2322 +blacklist qla2xxx +blacklist qla6312 +blacklist qla6322 +blacklist qlogicfas +blacklist qlogicfas408 +blacklist qlogicfc +blacklist qlogicisp +blacklist seagate +blacklist sim710 +blacklist sata_promise +blacklist sata_sil +blacklist sata_sis +blacklist sata_svw +blacklist sata_sx4 +blacklist sata_via +blacklist sata_vsc +blacklist scsi_debug +blacklist scsi_transport_fc +blacklist scsi_transport_spi +blacklist sym53c416 +blacklist sym53c8xx +blacklist sym53c8xx +blacklist t128 +blacklist tmscsim +blacklist u14-34f + diff --git a/source/a/eudev/config/modprobe.d/sound-modems.conf b/source/a/eudev/config/modprobe.d/sound-modems.conf new file mode 100644 index 00000000..f458346d --- /dev/null +++ b/source/a/eudev/config/modprobe.d/sound-modems.conf @@ -0,0 +1,10 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# ALSA modules to support sound modems. These should be loaded manually +# if needed. For most people they just break sound support... +blacklist snd-atiixp-modem +blacklist snd-intel8x0m +blacklist snd-via82xx-modem + diff --git a/source/a/eudev/config/modprobe.d/tulip.conf b/source/a/eudev/config/modprobe.d/tulip.conf new file mode 100644 index 00000000..64b6a5ca --- /dev/null +++ b/source/a/eudev/config/modprobe.d/tulip.conf @@ -0,0 +1,11 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices +blacklist de4x5 + +# At least 2.4.3 and later xircom_tulip doesn't have that conflict +# xircom_tulip_cb +blacklist dmfe + diff --git a/source/a/eudev/config/modprobe.d/usb-controller.conf b/source/a/eudev/config/modprobe.d/usb-controller.conf new file mode 100644 index 00000000..f5e4e502 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/usb-controller.conf @@ -0,0 +1,9 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# The EHCI driver should be loaded before the ones for low speed controllers +# or some devices may be confused when they are disconnected and reconnected. +softdep uhci-hcd pre: ehci-hcd +softdep ohci-hcd pre: ehci-hcd + diff --git a/source/a/eudev/config/modprobe.d/via-ircc.conf b/source/a/eudev/config/modprobe.d/via-ircc.conf new file mode 100644 index 00000000..3dfa5731 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/via-ircc.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# The kernel lists this as "experimental", but for now it's "broken" +blacklist via-ircc + diff --git a/source/a/eudev/config/modprobe.d/watchdog.conf b/source/a/eudev/config/modprobe.d/watchdog.conf new file mode 100644 index 00000000..22a5c829 --- /dev/null +++ b/source/a/eudev/config/modprobe.d/watchdog.conf @@ -0,0 +1,59 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Blacklist all watchdog modules. Many motherboards hang with them, and +# if you really need a watchdog, you probably know how to load the module +blacklist acquirewdt +blacklist advantechwdt +blacklist alim1535_wdt +blacklist alim7101_wdt +blacklist bcm7038_wdt +blacklist cadence_wdt +blacklist cpu5wdt +blacklist dw_wdt +blacklist eurotechwdt +blacklist f71808e_wdt +blacklist hpwdt +blacklist i6300esb +blacklist i8xx_tco +blacklist iTCO_vendor_support +blacklist iTCO_wdt +blacklist ib700wdt +blacklist ibmasr +blacklist ie6xx_wdt +blacklist it8712f_wdt +blacklist it87_wdt +blacklist machzwd +blacklist max63xx_wdt +blacklist mena21_wdt +blacklist menf21bmc_wdt +blacklist mixcomwd +blacklist nv_tco +blacklist pc87413_wdt +blacklist pcwd +blacklist pcwd_pci +blacklist pcwd_usb +blacklist retu_wdt +blacklist rn5t618_wdt +blacklist sbc60xxwdt +blacklist sbc7240_wdt +blacklist sbc8360 +blacklist sbc_epx_c3 +blacklist sbc_fitpc2_wdt +blacklist sc1200wdt +blacklist sc520_wdt +blacklist sch311x_wdt +blacklist scx200_wdt +blacklist smsc37b787_wdt +blacklist softdog +blacklist sp5100_tco +blacklist via_wdt +blacklist w83627hf_wdt +blacklist w83697hf_wdt +blacklist w83877f_wdt +blacklist w83977f_wdt +blacklist wafer5823wdt +blacklist wdt +blacklist wdt_pci + diff --git a/source/a/eudev/config/rc.d/rc.udev.new b/source/a/eudev/config/rc.d/rc.udev.new new file mode 100755 index 00000000..aaa1eb15 --- /dev/null +++ b/source/a/eudev/config/rc.d/rc.udev.new @@ -0,0 +1,185 @@ +#!/bin/sh +# This is a script to initialize udev, which populates the /dev +# directory with device nodes, scans for devices, loads the +# appropriate kernel modules, and configures the devices. + +PATH="/sbin:/bin" + +check_mounted() { + grep -E -q "^[^[:space:]]+ $1 $2" /proc/mounts + return $? +} + +mount_devpts() { + if ! check_mounted /dev/pts devpts ; then + mkdir /dev/pts 2> /dev/null + mount -n -o mode=0620,gid=5 -t devpts devpts /dev/pts + fi +} + +mount_devshm() { + if ! check_mounted /dev/shm tmpfs ; then + mkdir /dev/shm 2> /dev/null + mount /dev/shm + fi +} + +case "$1" in + start) + # Sanity check #1, udev requires that the kernel support tmpfs: + if ! grep -wq tmpfs /proc/filesystems ; then + echo "Sorry, but you need tmpfs support in the kernel to use udev." + echo + echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + exit 1 + fi + + # Sanity check #2, make sure that a 2.6.x kernel is new enough: + if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then + if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "32" ]; then + echo "Sorry, but you need a 2.6.32+ kernel to use this udev." + echo "Your kernel version is only $(uname -r)." + echo + echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + exit 1 + fi + fi + + # Sanity check #3, make sure the udev package was not removed. If udevd + # is not there, this will also shut off this script to prevent further + # problems: + if [ ! -x /sbin/udevd ]; then + chmod 0644 /etc/rc.d/rc.udev + echo "No udevd daemon found." + echo "Turning off udev: chmod 644 /etc/rc.d/rc.udev" + echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + exit 1 + fi + + # Disable hotplug helper since udevd listens to netlink: + if [ -e /proc/sys/kernel/hotplug ]; then + echo "" > /proc/sys/kernel/hotplug + fi + + if grep -qw devtmpfs /proc/filesystems ; then + if ! check_mounted /dev devtmpfs ; then + # umount shm if needed + check_mounted /dev/shm tmpfs && umount -l /dev/shm + + # Umount pts if needed, we will remount it later: + check_mounted /dev/pts devpts && umount -l /dev/pts + + # Mount tmpfs on /dev: + mount -n -t devtmpfs devtmpfs /dev + fi + else + # Mount tmpfs on /dev: + if ! check_mounted /dev tmpfs ; then + # umount shm if needed + check_mounted /dev/shm tmpfs && umount -l /dev/shm + + # Umount pts if needed, we will remount it later: + check_mounted /dev/pts devpts && umount -l /dev/pts + + # Mount tmpfs on /dev: + # the -n is because we don't want /dev umounted when + # someone (rc.[06]) calls umount -a + mount -n -o mode=0755 -t tmpfs tmpfs /dev + fi + fi + + # Mount devpts + mount_devpts + mount_devshm + + if ! /sbin/pidof udevd 1>/dev/null 2>/dev/null; then # start udevd + echo "Creating static nodes in /dev." + kmod static-nodes -f tmpfiles --output /run/static-nodes + grep "^d\ " /run/static-nodes | while read line ; do + mkdir -p -m $(echo $line | cut -f 3 -d ' ') $(echo $line | cut -f 2 -d ' ') + done + grep -v "^d\ " /run/static-nodes | while read line ; do + mknod -m $(echo $line | cut -f 3 -d ' ') \ + $(echo $line | cut -f 2 -d ' ') \ + $(echo $line | cut -b1 ) \ + $(echo $line | cut -f 7 -d ' ' | cut -f 1 -d :) \ + $(echo $line | cut -f 7 -d ' ' | cut -f 2 -d :) 2> /dev/null + done + rm -f /run/static-nodes + # Add any system defined additional device nodes: + cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2> /dev/null + # Add any locally defined additional device nodes: + cp --preserve=all --recursive --update /etc/udev/devices/* /dev 2> /dev/null + echo "Starting udevd: /sbin/udevd --daemon" + /sbin/udevd --daemon + # Since udev is just now being started we want to use add events: + echo "Triggering udev events: /sbin/udevadm trigger --action=add" + # Call udevtrigger and udevsettle to do the device configuration: + /sbin/udevadm trigger --type=subsystems --action=add + /sbin/udevadm trigger --type=devices --action=add + else # trigger changes for already running udevd + # If the persistent network rules file does not exist, trigger an add event: + if [ ! -r /etc/udev/rules.d/70-persistent-net.rules ]; then + # Test that we can actually write to the directory first: + if touch /etc/udev/rules.d/testfile 2> /dev/null ; then + rm -f /etc/udev/rules.d/testfile + # This should add persistent net rules: + echo "Triggering udev to write persistent rules to /etc/udev/rules.d/" + /sbin/udevadm trigger --type=devices --action=add + sleep 3 + # Create the files if they don't exist at this point. + # If a machine does not have a network device or an optical + # device, we don't want to waste time trying to generate + # rules at every boot. + # To force another attempt, delete the file(s). + touch /etc/udev/rules.d/70-persistent-net.rules + fi + fi + # Update the hardware database index (/etc/udev/hwdb.bin), if possible: + if touch /etc/udev/testfile 2> /dev/null ; then + rm -f /etc/udev/testfile + echo "Updating hardware database index: /sbin/udevadm hwdb --update" + /sbin/udevadm hwdb --update + fi + # Since udevd is running, most of the time we only need change events: + echo "Triggering udev events: /sbin/udevadm trigger --action=change" + /sbin/udevadm trigger --type=subsystems --action=change + /sbin/udevadm trigger --type=devices --action=change + fi + /sbin/udevadm settle --timeout=120 + ;; + stop) + echo "Stopping udevd is STRONGLY discouraged and not supported." + echo "If you are sure you want to do this, use 'force-stop' instead." + ;; + force-stop) + echo "Stopping udevd" + udevadm control --exit + killall udevd 2>/dev/null + ;; + restart) + echo "Restarting udevd is STRONGLY discouraged and not supported." + echo "If you are sure you want to do this, use 'force-restart' instead." + ;; + force-restart) + echo "Restarting udevd" + udevadm control --exit + sleep 3 + udevd --daemon + ;; + reload) + echo "Reloading udev rules" + udevadm control --reload + ;; + force-reload) + echo "Updating all available device nodes in /dev" + udevadm control --reload + rm -rf /dev/.udev /dev/disk + cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2> /dev/null + ;; + + *) + echo "Usage: $0 {start|stop|restart|reload|force-reload}" + exit 1 + ;; +esac diff --git a/source/a/eudev/config/rules.d/40-slackware.rules b/source/a/eudev/config/rules.d/40-slackware.rules new file mode 100644 index 00000000..3240b29e --- /dev/null +++ b/source/a/eudev/config/rules.d/40-slackware.rules @@ -0,0 +1,25 @@ +# /lib/udev/rules.d/40-slackware.rules +# +# Slackware custom udev rules +# Also see the following Slackware-provided custom rules files: +# 65-permissions.rules and 90-network.rules +# +# Any change in this file will be overwritten in upgrades. Put your +# custom rules somewhere else (90-local.rules is a good idea). +# +# See the udev man page to know the parameters you can use in udev +# rules. +# + +# input devices +KERNEL=="mice", SYMLINK+="mouse" + +# Set rfkill device writable by netdev group +KERNEL=="rfkill", GROUP:="netdev", MODE:="0664" + +# Mount fusectl filesystem +KERNEL=="fuse", ACTION=="add", RUN+="/bin/mount -t fusectl fusectl /sys/fs/fuse/connections" + +# Set default perms for /dev/ppp: +KERNEL=="ppp", MODE="0660", GROUP="dialout", OPTIONS+="static_node=ppp" + diff --git a/source/a/eudev/config/rules.d/65-permissions.rules b/source/a/eudev/config/rules.d/65-permissions.rules new file mode 100644 index 00000000..6f82b0f3 --- /dev/null +++ b/source/a/eudev/config/rules.d/65-permissions.rules @@ -0,0 +1,41 @@ +# Slackware permission rules +# +# These rules are here instead of 40-slackware.rules because +# many of them need to run after the block section in +# 50-udev.default.rules +# +# Remember, in any upgrade, this file will be overwritten. +# Put your custom rules somewhere else (90-local.rules is +# a good idea). +# + +# all disks with group disk +KERNEL!="fd*", SUBSYSTEM=="block", GROUP="disk" + +# put all removable devices in group "plugdev" +KERNEL=="sd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev" +KERNEL=="sd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev" + +# Many hot-pluggable devices (ZIP, Jazz, LS-120, etc...) +# need to be in plugdev, too. +KERNEL=="diskonkey*", GROUP="plugdev" +KERNEL=="jaz*", GROUP="plugdev" +KERNEL=="pocketzip*", GROUP="plugdev" +KERNEL=="zip*", GROUP="plugdev" +KERNEL=="ls120", GROUP="plugdev" +KERNEL=="microdrive*", GROUP="plugdev" + +# CD group and permissions +ENV{ID_CDROM}=="?*", GROUP="cdrom", MODE="0660" +KERNEL=="pktcdvd", GROUP="cdrom", MODE="0660" +KERNEL=="pktcdvd[0-9]*", GROUP="cdrom", MODE="0660" +# permissions for SCSI sg devices +SUBSYSTEMS=="scsi", KERNEL=="s[gt][0-9]*", ATTRS{type}=="5", \ + GROUP="cdrom", MODE="0660" + +# Make DRI video devices usable by anyone in group "video": +KERNEL=="card[0-9]*",GROUP:="video" + +# Make the real time clock readable by all, and writable by root: +KERNEL=="rtc|rtc0", MODE="0644" + diff --git a/source/a/eudev/config/udev.conf b/source/a/eudev/config/udev.conf new file mode 100644 index 00000000..e507e116 --- /dev/null +++ b/source/a/eudev/config/udev.conf @@ -0,0 +1,8 @@ +# /etc/udev/udev.conf + +# This file can be used to override some of udev's default values +# See udev(7) for details + +# udev_log - The initial syslog(3) priority: "err", "info", "debug" +udev_log="err" + diff --git a/source/a/eudev/doinst.sh b/source/a/eudev/doinst.sh new file mode 100644 index 00000000..2912e5c8 --- /dev/null +++ b/source/a/eudev/doinst.sh @@ -0,0 +1,36 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Keep same perms on rc.udev.new: +if [ -e etc/rc.d/rc.udev ]; then + cp -a etc/rc.d/rc.udev etc/rc.d/rc.udev.new.incoming + cat etc/rc.d/rc.udev.new > etc/rc.d/rc.udev.new.incoming + mv etc/rc.d/rc.udev.new.incoming etc/rc.d/rc.udev.new +fi + +# There's no reason for a user to edit rc.udev, so overwrite it: +if [ -r etc/rc.d/rc.udev.new ]; then + mv etc/rc.d/rc.udev.new etc/rc.d/rc.udev +fi + +# This should catch *all* files in /etc/modprobe.d/ and move them over to +# have .conf extensions +for modfile in $(ls etc/modprobe.d/ | grep -v "\.\(conf\|bak\|orig\|new\)"); do + if [ "$modfile" = README ]; then + true # do nothing + elif [ -e etc/modprobe.d/$modfile -a ! -e etc/modprobe.d/$modfile.conf ]; then + mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.conf + elif [ -e etc/modprobe.d/$modfile -a -e etc/modprobe.d/$modfile.conf ]; then + mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.bak + fi +done + diff --git a/source/a/eudev/eudev.SlackBuild b/source/a/eudev/eudev.SlackBuild new file mode 100755 index 00000000..c82107f4 --- /dev/null +++ b/source/a/eudev/eudev.SlackBuild @@ -0,0 +1,161 @@ +#!/bin/sh + +# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2015 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +VERSION=${VERSION:-$(echo eudev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-8} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-eudev + +rm -rf $PKG +mkdir -p $TMP $PKG/lib/udev +cd $TMP +rm -rf eudev-$VERSION +tar xvf $CWD/eudev-$VERSION.tar.xz || exit 1 +cd eudev-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Patch 60-cdrom_id.rules to create a full set of symlinks: +zcat $CWD/60-cdrom_id.rules.diff.gz | patch -p1 --verbose || exit 1 + +zcat $CWD/0001-Remove-obsolete-udev_root-references.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0002-src-udev-udevd.c-add-eudev-startup-message-for-kmsg.patch.gz | patch -p1 --verbose || exit 1 + +./configure \ + --prefix=/usr \ + --with-rootprefix=/ \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --with-rootlibdir=/lib${LIBDIRSUFFIX} \ + --with-rootrundir=/run \ + --with-rootlibexecdir=/lib/udev \ + --sysconfdir=/etc \ + --bindir=/sbin \ + --sbindir=/sbin \ + --libexecdir=/lib \ + --enable-introspection \ + --enable-hwdb \ + --enable-manpages \ + --mandir=/usr/man \ + --docdir=/usr/doc/eudev-$VERSION \ + --disable-static \ + --enable-rule_generator \ + --enable-split-usr \ + --build=$ARCH-slackware-linux || exit 1 + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# scsi_id is needed by multipath +( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id ) + +# Move system installed hwdb files under /lib: +mkdir -p $PKG/lib/udev/hwdb.d +mv $PKG/etc/udev/hwdb.d/* $PKG/lib/udev/hwdb.d + +mkdir -p \ + $PKG/run \ + $PKG/{etc,lib}/modprobe.d \ + $PKG/etc/rc.d \ + $PKG/etc/udev/rules.d \ + $PKG/lib/firmware + +# Yes, this will clobber existing config files. +cp -a $CWD/config/udev.conf $PKG/etc/udev/udev.conf + +# Copy Slackware custom rules: +cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/ + +# Now the init script and kmod stuff: +cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new +cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/ +cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/ + +chown -R root:root $PKG/etc $PKG/lib/modprobe.d +find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \; +find $PKG/etc -type d -exec chmod 755 {} \; +chmod 0755 $PKG/etc/rc.d/rc.udev.new + +# Add extra device nodes to the package that udev doesn't make: +mkdir -p $PKG/lib/udev/devices +if [ -r $CWD/udev-fixed-devices.tar.gz ]; then + tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG +fi + +# Support locally added additional devices found in this directory: +mkdir -p $PKG/etc/udev/devices + +chown -R root:root $PKG/lib/udev +chmod 0755 $PKG/lib/udev/* + +mkdir -p $PKG/usr/doc/eudev-$VERSION +cp -a \ + COPYING* README* TODO \ + $PKG/usr/doc/eudev-$VERSION + +# Compress and fix manpage symlinks: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c y $TMP/eudev-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/eudev/slack-desc b/source/a/eudev/slack-desc new file mode 100644 index 00000000..c709d6e0 --- /dev/null +++ b/source/a/eudev/slack-desc @@ -0,0 +1,20 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' on +# the right side marks the last column you can put a character in. You must make +# exactly 11 lines for the formatting to be correct. It's also customary to +# leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +eudev: eudev (dynamic device directory system) +eudev: +eudev: eudev provides a dynamic device directory containing only the files +eudev: for the devices which are actually present. It creates or removes +eudev: device node files usually located in the /dev directory. eudev is a +eudev: fork of git://anongit.freedesktop.org/systemd/systemd with the aim of +eudev: isolating udev from any particular flavor of system initialization. +eudev: +eudev: Homepage: https://wiki.gentoo.org/wiki/Project:Eudev +eudev: +eudev: + |