diff options
Diffstat (limited to 'source/a/devs/makedev_2.3.1-46.2.diff')
| -rw-r--r-- | source/a/devs/makedev_2.3.1-46.2.diff | 2952 |
1 files changed, 2952 insertions, 0 deletions
diff --git a/source/a/devs/makedev_2.3.1-46.2.diff b/source/a/devs/makedev_2.3.1-46.2.diff new file mode 100644 index 00000000..87ad22f8 --- /dev/null +++ b/source/a/devs/makedev_2.3.1-46.2.diff @@ -0,0 +1,2952 @@ +--- makedev-2.3.1.orig/MAKEDEV.man ++++ makedev-2.3.1/MAKEDEV.man +@@ -124,8 +124,7 @@ + .BI ttyC x + and the corresponding dial-out device is + .BI cub x +-By default devices for 7 lines are created, but this can be changed to +-15 by removing the comment. ++Devices for 32 lines are created. + .TP + .B Pseudo Terminals + .TP +@@ -387,4 +386,4 @@ + Linux Allocated Devices, maintained by H.\ Peter Anvin, + <Peter.Anvin@linux.org>. + .SH AUTHOR +-Nick Holloway, <Nick.Hollowa +\ No newline at end of file ++Nick Holloway, <Nick.Hollowa +--- makedev-2.3.1.orig/MAKEDEV ++++ makedev-2.3.1/MAKEDEV +@@ -10,25 +10,38 @@ + # system, and you may change the permissions to suit your preference. These + # lines _must_ be of the format "user group perm". + +- public=" root sys 666" +- system=" root sys 660" +- kmem=" root kmem 660" +- tty=" root tty 666" +- cons=" root tty 622" # 622 for console? +- vcs=" root sys 600" +-dialout=" root uucp 660" +- mouse=" root sys 666" +-printer=" root daemon 660" +- floppy=" root floppy 660" +- disk=" root disk 660" +- scsi=" root sys 600" +- cdrom=" root disk 660" +- tape=" root disk 660" +- audio=" root sys 666" +- ibcs2=" root sys 666" +-scanner=" root sys 666" ++ public=" root root 0666" ++private=" root root 0600" ++ system=" root root 0660" ++ kmem=" root kmem 0640" ++ tty=" root tty 0666" ++ cons=" root tty 0622" ++ vcs=" root root 0600" ++dialout=" root dialout 0660" ++ mouse=" root root 0660" ++printer=" root lp 0660" ++ floppy=" root floppy 0660" ++ disk=" root disk 0660" ++ scsi=" root root 0600" ++ cdrom=" root cdrom 0660" ++ tape=" root tape 0660" ++ audio=" root audio 0660" ++ video=" root video 0660" ++ ibcs2=" root root 0666" ++scanner=" root root 0666" ++ coda=" root root 0600" ++ ipsec=" root root 0200" ++readable=" root root 0444" + +-MAXVT=8 ++MAXVT=63 ++ ++# defaults for $major_* ++major_ide0=3 ++major_ide1=22 ++major_sd=8 ++major_lp=6 ++ ++# Remark: OSS/Linux becomes major_OSSLinux + + #---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---# + +@@ -94,41 +107,30 @@ + + #---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---# + +-# For bash and ksh, we can use faster builtin routines to do manipulation, +-# otherwise (ash) fall back to slower method using `expr'. +-# The extra level of indirection using `eval' is necessary a) for ksh, and +-# b) to get past ash. ++# Debian allows us to assume /bin/sh is a POSIX compliant shell, so go for it! + +-if [ "$RANDOM" != "$RANDOM" ] +-then +- math () { +- eval echo "\$(($*))" +- } +- index () { # index string c +- eval "I=\${1%$2*}" +- eval echo "\${#I}" +- } +- suffix () { +- eval echo "\${1#$2}" +- } +- strip () { +- eval echo "\${1% $2 *} \${1#* $2 }" +- } +-else +- math () { +- expr "$@" +- } +- index () { # index string c +- expr $1 : ".*$2" - 1 +- } +- suffix () { +- expr "$1" : "$2\(.*\)" +- } +- strip () { +- echo "[$1][$2]" >&2 +- echo "`expr \"$1\" : \"\(.*\) $2 \"` `expr \"$1\" : \".* $2 \(.*\)\"`" +- } +-fi ++math () { ++ eval echo "\$(($*))" ++} ++index () { # index string c ++ eval "I=\${1%$2*}" ++ eval echo "\${#I}" ++} ++suffix () { ++ eval echo "\${1#$2}" ++} ++strip () { ++ eval echo "\${1% $2 *} \${1#* $2 }" ++} ++first () { ++ eval echo "\${1:0:1}" ++} ++second () { ++ eval echo "\${1:1:1}" ++} ++substr () { ++ echo $1 | cut -c $2 ++} + + #---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---# + +@@ -140,6 +142,7 @@ + exec 3<$procfs/devices + while read major device <&3 + do ++ device=`echo $device|tr -d /` + case "$major" in + Character|Block|'') + ;; +@@ -166,7 +169,7 @@ + while [ $# -ne 0 ] + do + case "$1" in +- mem|tty|ttyp|cua|cub) ;; ++ mem|tty|ttyp|cua|cub|cui) ;; + hd) (for d in a b c d e f g h ; do + echo -n hd$d " " + done) ; echo +@@ -175,13 +178,16 @@ + ide1) echo hdc hdd ;; + ide2) echo hde hdf ;; + ide3) echo hdg hdh ;; +- sd) echo sda sdb ;; +- sr) echo scd0 ;; ++ sd) echo sda sdb sdc sdd ;; ++ sg) echo sg ;; ++ sr) echo scd ;; + st) echo st0 ;; + xd) echo xda xdb ;; ++ ad) echo ada adb ;; + fd) echo fd0 fd1 ;; + lp) echo lp ;; + mt) echo ftape ;; ++ qft) echo ftape ;; + loop) echo loop ;; + md) echo md ;; + ibcs2) echo ibcs2 ;; +@@ -191,13 +197,31 @@ + ac4096) echo ac4096 ;; + hw) echo helloworld ;; + sbpcd | sbpcd[123]) echo $1 ;; +- Joystick) echo js ;; ++ joystick) echo js ;; + apm_bios) echo apm ;; + dcf) echo dcf ;; + aztcd) echo aztcd ;; ++ cm206cd) echo cm206cd ;; ++ gscd) echo gscd ;; + pcmcia) ;; # taken care of by its own driver + ttyC) echo cyclades ;; ++ isdn) echo isdnmodem isdnbri dcbri ;; + vcs) ;; ++ pty) echo pty ;; ++ misc) echo misc ;; ++ 3dfx) echo 3dfx ;; ++ agpgart) echo agpgart ;; ++ ipmi|ipmikcs) echo ipmi ;; ++ fb) echo fb ;; ++ nb) echo nb0 nb1 ;; ++ netlink) echo netlink ;; ++ hamradio) echo hamradio ;; ++ snd) ;; ++ ptm) ;; ++ pts) ;; ++ ttyS) echo ttyS0 ttyS1 ttyS2 ttyS3 ;; ++ ttyI) echo ttyI0 ttyI1 ttyI2 ttyI3 ;; ++ ircomm|irlpt) irda ;; + *) echo "$0: don't know what \"$1\" is" >&2 ;; + esac + shift +@@ -206,20 +230,148 @@ + + for arg + do ++# case `cvt $arg` in + case $arg in + generic) ++ # pick the right generic-<arch> using dpkg's knowledge ++ case `dpkg --print-installation-architecture` in ++ alpha) ++ $0 $opts generic-alpha ++ ;; ++ arm) ++ $0 $opts generic-arm ++ ;; ++ i386) ++ $0 $opts generic-i386 ++ ;; ++ m68k) ++ $0 $opts generic-m68k ++ ;; ++ powerpc) ++ $0 $opts generic-powerpc ++ ;; ++ sparc) ++ $0 $opts generic-sparc ++ ;; ++ *) ++ echo "$0: no support for generic-$arg" >&2 ++ exit 1 ++ ;; ++ esac ++ ;; ++ generic-alpha) + $0 $opts std + $0 $opts fd + $0 $opts fd0 fd1 +- $0 $opts hda hdb ++ $0 $opts hda hdb hdc hdd ++ $0 $opts xda xdb ++ $0 $opts sda sdb sdc sdd ++ $0 $opts scd0 scd1 ++ $0 $opts st0 st1 ++ $0 $opts sg ++ $0 $opts pty ++ $0 $opts console ++ $0 $opts ttyS0 ttyS1 ttyS2 ttyS3 ++ $0 $opts busmice ++ $0 $opts lp ++ $0 $opts par ++ $0 $opts audio ++ $0 $opts fb ++ ;; ++ generic-arm) ++ $0 $opts std ++ $0 $opts fd ++ $0 $opts fd0 fd1 ++ $0 $opts hda hdb hdc hdd ++ $0 $opts xda xdb ++ $0 $opts sda sdb sdc sdd ++ $0 $opts scd0 scd1 ++ $0 $opts st0 st1 ++ $0 $opts sg ++ $0 $opts pty ++ $0 $opts console ++ $0 $opts ttyS0 ttyS1 ttyS2 ttyS3 ++ $0 $opts busmice ++ $0 $opts lp ++ $0 $opts par ++ $0 $opts audio ++ $0 $opts fb ++ ;; ++ generic-i386) ++ $0 $opts std ++ $0 $opts fd ++ $0 $opts fd0 fd1 ++ $0 $opts hda hdb hdc hdd + $0 $opts xda xdb +- $0 $opts sda sdb ++ $0 $opts sda sdb sdc sdd ++ $0 $opts scd0 scd1 ++ $0 $opts st0 st1 ++ $0 $opts sg + $0 $opts pty + $0 $opts console + $0 $opts ttyS0 ttyS1 ttyS2 ttyS3 + $0 $opts busmice + $0 $opts lp + $0 $opts par ++ $0 $opts audio ++ $0 $opts fb ++ ;; ++ generic-m68k) ++ $0 $opts std ++ $0 $opts fd ++ $0 $opts fd0-bare fd1-bare ++ $0 $opts hda hdb ++ $0 $opts sda sdb sdc sdd ++ $0 $opts sg ++ $0 $opts ada adb ++ $0 $opts pty ++ $0 $opts console ++ $0 $opts ttyS0 ttyS1 ttyS2 ttyS3 ttyS5 ++ $0 $opts m68k-mice ++ $0 $opts lp ++ $0 $opts par ++ $0 $opts nvram ++ $0 $opts audio ++ $0 $opts fb ++ ;; ++ generic-powerpc) ++ $0 $opts std ++ $0 $opts fd ++ $0 $opts fd0-bare fd1-bare ++ $0 $opts hda hdb hdc hdd ++ $0 $opts sda sdb sdc sdd ++ $0 $opts scd0 scd1 ++ $0 $opts st0 st1 ++ $0 $opts sg ++ $0 $opts pty ++ $0 $opts console ++ $0 $opts ttyS0 ttyS1 ttyS2 ttyS3 ++ $0 $opts busmice ++ $0 $opts lp ++ $0 $opts par ++ $0 $opts nvram ++ $0 $opts audio ++ $0 $opts adb ++ $0 $opts fb ++ $0 $opts rtc ++ ;; ++ generic-sparc) ++ $0 $opts std ++ $0 $opts fd0-bare fd1-bare ++ $0 $opts hda hdb ++ $0 $opts sda sdb sdc sdd ++ $0 $opts scd0 scd1 ++ $0 $opts st0 st1 ++ $0 $opts sg ++ $0 $opts pty ++ $0 $opts console ++ $0 $opts ttyS0 ttyS1 ttyS2 ttyS3 ++ $0 $opts fb ++ $0 $opts rtc ++ makedev kbd c 11 0 $cons ++ makedev sunmouse c 10 6 $mouse ++ symlink sunmouse mouse ++ makedev openprom c 10 139 $private + ;; + local) + $0.local $opts +@@ -232,22 +384,71 @@ + makedev zero c 1 5 $public + symlink core $procfs/kcore + makedev full c 1 7 $public +- $0 ram ++ makedev random c 1 8 $readable ++ makedev urandom c 1 9 $readable + makedev tty c 5 0 $tty ++ $0 $opts ram ++ $0 $opts loop ++ ;; ++ hamradio) ++ $0 $opts scc ++ $0 $opts bc ++ ;; ++ scc) ++ for unit in 0 1 2 3 4 5 6 7 ++ do ++ makedev scc$unit c 34 $unit $system ++ done ++ ;; ++ bc) ++ for unit in 0 1 2 3 ++ do ++ makedev bc$unit c 51 $unit $system ++ done ++ ;; ++ random) ++ makedev random c 1 8 $readable ++ ;; ++ urandom) ++ makedev urandom c 1 9 $readable + ;; + ram) +- for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do ++ for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do + makedev ram$i b 1 $i $disk + done +- ln -sf ram1 ram ++ symlink ram ram1 + ;; +- console) +- major=`Major vcs` # not fatal +- # console ++ ram[0-9]|ram1[0-6]) ++ unit=`suffix $arg ram` ++ makedev ram$unit b 1 $unit $disk ++ ;; ++ initrd) ++ makedev initrd b 1 250 $disk ++ ;; ++ consoleonly) + makedev tty0 c 4 0 $cons +- symlink console tty0 ++ # new kernels need a device, old ones a symlink... sigh ++ kern_rev1=`uname -r | awk -F'.' '{print $1}'` ++ kern_rev2=`uname -r | awk -F'.' '{print $2}'` ++ if [ $kern_rev1 -gt 2 ] ++ then ++ makedev console c 5 1 $cons ++ else ++ if [ $kern_rev1 -eq 2 -a $kern_rev2 -ge 1 ] ++ then ++ makedev console c 5 1 $cons ++ else ++ symlink console tty0 ++ fi ++ fi ++ ;; ++ console) ++ $0 $opts consoleonly ++ major=`Major vcs 7` # not fatal + [ "$major" ] && makedev vcs0 c $major 0 $vcs +- [ "$major" ] && makedev vcsa c $major 128 $vcs ++ symlink vcs vcs0 ++ [ "$major" ] && makedev vcsa0 c $major 128 $vcs ++ symlink vcsa vcsa0 + # individual vts + line=1 + while [ $line -le $MAXVT -a $line -le 63 ] +@@ -258,6 +459,32 @@ + line=`math $line + 1` + done + ;; ++ adb) ++ # pick the right arch device using dpkg's knowledge ++ case `dpkg --print-installation-architecture` in ++ powerpc) ++ # ADB bus devices (char) ++ makedev adb c 56 0 $mouse ++ makedev adbmouse c 10 10 $mouse ++ ;; ++ m68k) ++ # ACSI disk 2, whole device (block) ++ makedev adb b 28 16 $disk ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ do ++ minor=$(( 16 + $part )) ++ makedev adb$part b 28 $minor $disk ++ done ++ ;; ++ *) ++ echo "no support for adb on $arg" >&2 ++ exit 1 ++ ;; ++ esac ++ ;; ++ nvram) ++ makedev nvram c 10 144 $kmem ++ ;; + tty[1-9]|tty[1-5][0-9]|tty[6][0-3]) + line=`suffix $arg tty` + makedev tty$line c 4 $line $tty +@@ -265,8 +492,7 @@ + ttyS[0-9]|ttyS[1-5][0-9]|ttyS[6][0-3]) + line=`suffix $arg ttyS` + minor=`math 64 + $line` +- makedev ttyS$line c 4 $minor $tty +- makedev cua$line c 5 $minor $dialout ++ makedev ttyS$line c 4 $minor $dialout + ;; + pty[a-ep-z]) + bank=`suffix $arg pty` +@@ -285,42 +511,350 @@ + do + ptysufs="$ptysufs pty$i" + done +- $0 $opts $ptysufs ++ $0 $opts $ptysufs ptmx + ;; +- cyclades) +- major1=`Major ttyC` || continue +- major2=`Major cub` || continue ++ ptmx) ++ # master pty multiplexer for 2.1 kernels ++ makedev ptmx c 5 2 $tty ++ ;; ++ cyclades|ttyC) ++ major1=`Major ttyC 19` || continue ++ #major2=`Major cub 20` || continue + for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ +- 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ++ 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ++ do ++ makedev ttyC$i c $major1 $i $dialout ++ #makedev cub$i c $major2 $i $dialout ++ done ++ ;; ++ stallion|ttyE) ++ major1=`Major ttyE 24` || continue ++ #major2=`Major cue 25` || continue ++ majorc=28 ++ minor=0 ++ until [ $minor -gt 256 ] ++ do ++ makedev ttyE$minor c $major1 $minor $dialout ++ #makedev cue$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ for i in 0 1 2 3 ++ do ++ makedev staliomem$i c $majorc $i $private ++ done ++ ;; ++ chase|ttyH) ++ major1=`Major ttyH 17` || continue ++ #major2=`Major cuh 18` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyH$minor c $major1 $minor $dialout ++ #makedev cuh$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ rocketport|ttyR) ++ major1=`Major ttyR 46` || continue ++ #major2=`Major cur 47` || continue ++ minor=0 ++ until [ $minor -gt 64 ] # tell me if 64 is wrong ++ do ++ makedev ttyR$minor c $major1 $minor $dialout ++ #makedev cur$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ ttyV) ++ major1=`Major ttyV 105` || continue ++ #major2=`Major cuv 106` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyV$minor c $major1 $minor $dialout ++ #makedev cuv$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ digi|ttyD) ++ major1=`Major ttyD 22` || continue ++ #major2=`Major cud 23` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyD$minor c $major1 $minor $dialout ++ #makedev cud$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ specialix|ttyX) ++ major1=`Major ttyX 32` || continue ++ #major2=`Major cux 33` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyX$minor c $major1 $minor $dialout ++ #makedev cux$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ specialixIO8|ttyW) ++ major1=`Major ttyW 75` || continue ++ #major2=`Major cuw 76` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyW$minor c $major1 $minor $dialout ++ #makedev cuw$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ PAM|ttyM) ++ major1=`Major ttyM 79` || continue ++ #major2=`Major cum 80` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyM$minor c $major1 $minor $dialout ++ #makedev cum$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ riscom|ttyL) ++ major=`Major ttyL 48` || continue ++ minor=0 ++ until [ $minor -gt 16 ] # tell me if 16 is wrong ++ do ++ makedev ttyL$minor c $major $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ computone|ttyF) ++ major=`Major ttyF 71` || continue ++ #major2=`Major cuf 72` || continue ++ minor=0 ++ until [ $minor -gt 255 ] ++ do ++ makedev ttyF$minor c $major $minor $dialout ++ #makedev cuf$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ major=73 ++ for i in 0 4 8 12 ++ do ++ makedev ip2ipl$i c $major $i $private ++ makedev ip2stat$i c $major `math $i + 1` $private ++ done ++ ;; ++ ESP|ttyP) ++ major=`Major ttyP 57` || continue ++ #major2=`Major cup 58` || continue ++ minor=0 ++ until [ $minor -gt 4 ] # tell me if 4 is wrong ++ do ++ makedev ttyP$minor c $major $minor $dialout ++ #makedev cup$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ COMX|comx) ++ major=`Major comx 88` || continue ++ minor=0 ++ until [ $minor -gt 4 ] # tell me if 4 is wrong ++ do ++ makedev comx$minor c $major $minor $private ++ minor=`math $minor + 1` ++ done ++ ;; ++ isdnmodem|ttyI) ++ major1=`Major ttyI 43` || continue ++ #major2=`Major cui 44` || continue ++ minor=0 ++ until [ $minor -gt 63 ] ++ do ++ makedev ttyI$minor c $major1 $minor $dialout ++ #makedev cui$minor c $major2 $minor $dialout ++ minor=`math $minor + 1` ++ done ++ ;; ++ isdnbri) ++ major=45 ++ minor=0 ++ until [ $minor -gt 63 ] ++ do ++ makedev isdn$minor c $major $minor $private ++ makedev isdnctrl$minor c $major `math $minor + 64` $private ++ makedev ippp$minor c $major `math $minor + 128` $private ++ minor=`math $minor + 1` ++ done ++ makedev isdninfo c $major 255 $private ++ ;; ++ dcbri) ++ major=52 ++ for i in 0 1 2 3 ++ do ++ makedev dcbri$i c $major $i $private ++ done ++ ;; ++ capi) ++ major=68 ++ makedev capi20 c $major 0 $private ++ for i in 0 1 2 3 4 5 6 7 8 9 ++ do ++ makedev capi20.0$i c $major `math $i + 1` $private ++ done ++ for i in 10 11 12 13 14 15 16 17 18 19 ++ do ++ makedev capi20.$i c $major `math $i + 1` $private ++ done ++ ;; ++ fb) ++ for i in 0 1 2 3 4 5 6 7 ++ do ++ makedev fb$i c 29 `math 32 \* $i` $cons ++ makedev fb${i}current c 29 `math 32 \* $i` $cons ++ makedev fb${i}autodetect c 29 `math 32 \* $i + 1` $cons ++ done ++ ;; ++ fb[0-7]) ++ dev=`suffix $arg fb` ++ base=`math 32 \* $dev` ++ makedev fb$dev c 29 $base $cons ++ makedev fb${dev}current c 29 $base $cons ++ makedev fb${dev}autodetect c 29 `math $base + 1` $cons ++ for i in 0 1 2 3 4 5 6 7 + do +- makedev ttyC$i c $major1 $i $tty +- makedev cub$i c $major2 $i $dialout ++ makedev fb${dev}user$i c 29 `math $base + 24 + $i` $cons ++ done ++ ;; ++ netlink) ++ makedev route c 36 0 $coda ++ makedev skip c 36 1 $coda ++ makedev fwmonitor c 36 3 $coda ++ for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ do ++ makedev tap$i c 36 `math $i + 16` $coda + done + ;; + lp) +- major=`Major lp` || continue ++ major=`Major lp 6` || continue + makedev ${arg}0 c $major 0 $printer + makedev ${arg}1 c $major 1 $printer + makedev ${arg}2 c $major 2 $printer + ;; + par) +- major=`Major lp` || continue ++ major=`Major lp 6` || continue ++ makedev ${arg}0 c $major 0 $printer ++ makedev ${arg}1 c $major 1 $printer ++ makedev ${arg}2 c $major 2 $printer ++ ;; ++ parport) ++ major=`Major parport 99` || continue + makedev ${arg}0 c $major 0 $printer + makedev ${arg}1 c $major 1 $printer + makedev ${arg}2 c $major 2 $printer + ;; ++ slm) ++ major=`Major slm 28` || continue ++ for i in 0 1 2 3 ++ do ++ makedev slm c $major $i $printer ++ done ++ ;; + busmice) + major=`Major mouse 10` || continue +- makedev logimouse c $major 0 $mouse +- makedev psmouse c $major 1 $mouse +- makedev msmouse c $major 2 $mouse +- makedev atimouse c $major 3 $mouse +- makedev jmouse c $major 4 $mouse ++ makedev logibm c $major 0 $mouse ++ makedev psaux c $major 1 $mouse ++ makedev inportbm c $major 2 $mouse ++ makedev atibm c $major 3 $mouse ++ makedev jbm c $major 4 $mouse ++ makedev usbmouse c $major 32 $mouse ++ ;; ++ m68k-mice) ++ major=`Major mouse 10` || continue ++ makedev amigamouse c $major 4 $mouse ++ makedev atarimouse c $major 5 $mouse ++ makedev amigamouse1 c $major 7 $mouse ++ makedev adbmouse c $major 10 $mouse ++ ;; ++ 3dfx) ++ major=`Major $arg 107` || continue ++ makedev $arg c $major 0 $video ++ ;; ++ agpgart) ++ major=`Major $arg 10` || continue ++ makedev $arg c $major 175 $video ++ ;; ++ ipmi|ipmikcs) ++ major=`Major ipmikcs 10` || continue ++ makedev ipmikcs c $major 173 $private ++ ;; ++ irda) ++ for i in 0 1 ++ do ++ makedev ircomm$i c 161 $i $mouse ++ makedev irlpt$i c 161 `math $i + 16` $mouse ++ done ++ ;; ++ misc) ++ major=`Major mouse 10` || continue ++ makedev logibm c $major 0 $mouse ++ makedev psaux c $major 1 $mouse ++ makedev inportbm c $major 2 $mouse ++ makedev atibm c $major 3 $mouse ++ makedev jbm c $major 4 $mouse ++ makedev amigamouse c $major 4 $mouse ++ makedev atarimouse c $major 5 $mouse ++ makedev sunmouse c $major 6 $mouse ++ makedev amigamouse1 c $major 7 $mouse ++ makedev smouse c $major 8 $mouse ++ makedev pc110pad c $major 9 $mouse ++ makedev adbmouse c $major 10 $mouse ++ makedev beep c $major 128 $mouse ++ makedev modreq c $major 129 $mouse ++ makedev watchdog c $major 130 $mouse ++ makedev temperature c $major 131 $mouse ++ makedev hwtrap c $major 132 $mouse ++ makedev exttrp c $major 133 $mouse ++ makedev apm_bios c $major 134 $mouse ++ makedev rtc c $major 135 $mouse ++ makedev openprom c $major 139 $mouse ++ makedev relay8 c $major 140 $mouse ++ makedev relay16 c $major 141 $mouse ++ makedev msr c $major 142 $mouse ++ makedev pciconf c $major 143 $mouse ++ makedev nvram c $major 144 $mouse ++ makedev hfmodem c $major 145 $mouse ++ makedev led c $major 151 $mouse ++ makedev mergemem c $major 153 $mouse ++ makedev pmu c $major 154 $mouse ++ ;; ++ smapi|thinkpad) ++ major=`Major mouse 10` || continue ++ makedev smapi c $major 170 $mouse ++ symlink smapi thinkpad ++ ;; ++ rtc) ++ major=`Major mouse 10` || continue ++ makedev rtc c $major 135 $mouse + ;; + js) +- major=`Major Joystick` || continue +- makedev js0 c $major 0 $mouse +- makedev js1 c $major 1 $mouse ++ major=`Major Joystick 15` || continue ++ for unit in 0 1 2 3 ++ do ++ makedev js$unit c $major $unit $readable ++ makedev djs$unit c $major `math $unit + 128` $readable ++ done ++ ;; ++ fd[0-7]-bare) ++ sarg="${arg%-bare}" ++ major=`Major fd 2` || continue ++ base=`suffix $sarg fd` ++ if [ $base -ge 4 ] ++ then ++ base=`math $base + 124` ++ fi ++ makedev ${sarg} b $major $base $floppy + ;; + fd[0-7]) + major=`Major fd 2` || continue +@@ -332,39 +866,47 @@ + makedev ${arg} b $major $base $floppy + makedev ${arg}d360 b $major `math $base + 4` $floppy + makedev ${arg}h1200 b $major `math $base + 8` $floppy +- makedev ${arg}D360 b $major `math $base + 12` $floppy +- makedev ${arg}D720 b $major `math $base + 16` $floppy ++ makedev ${arg}u360 b $major `math $base + 12` $floppy ++ makedev ${arg}u720 b $major `math $base + 16` $floppy + makedev ${arg}h360 b $major `math $base + 20` $floppy + makedev ${arg}h720 b $major `math $base + 24` $floppy +- makedev ${arg}H1440 b $major `math $base + 28` $floppy +- makedev ${arg}E2880 b $major `math $base + 32` $floppy ++ makedev ${arg}u1440 b $major `math $base + 28` $floppy ++ makedev ${arg}u2880 b $major `math $base + 32` $floppy + makedev ${arg}CompaQ b $major `math $base + 36` $floppy + +- symlink ${arg}H360 ${arg}D360 +- symlink ${arg}H720 ${arg}D720 +- + makedev ${arg}h1440 b $major `math $base + 40` $floppy +- makedev ${arg}H1680 b $major `math $base + 44` $floppy ++ makedev ${arg}u1680 b $major `math $base + 44` $floppy + makedev ${arg}h410 b $major `math $base + 48` $floppy +- makedev ${arg}H820 b $major `math $base + 52` $floppy ++ makedev ${arg}u820 b $major `math $base + 52` $floppy + makedev ${arg}h1476 b $major `math $base + 56` $floppy +- makedev ${arg}H1722 b $major `math $base + 60` $floppy ++ makedev ${arg}u1722 b $major `math $base + 60` $floppy + makedev ${arg}h420 b $major `math $base + 64` $floppy +- makedev ${arg}H830 b $major `math $base + 68` $floppy ++ makedev ${arg}u830 b $major `math $base + 68` $floppy + makedev ${arg}h1494 b $major `math $base + 72` $floppy +- makedev ${arg}H1743 b $major `math $base + 76` $floppy ++ makedev ${arg}u1743 b $major `math $base + 76` $floppy + makedev ${arg}h880 b $major `math $base + 80` $floppy +- makedev ${arg}D1040 b $major `math $base + 84` $floppy +- makedev ${arg}D1120 b $major `math $base + 88` $floppy ++ makedev ${arg}u1040 b $major `math $base + 84` $floppy ++ makedev ${arg}u1120 b $major `math $base + 88` $floppy + makedev ${arg}h1600 b $major `math $base + 92` $floppy +- makedev ${arg}H1760 b $major `math $base + 96` $floppy +- makedev ${arg}H1920 b $major `math $base + 100` $floppy +- makedev ${arg}E3200 b $major `math $base + 104` $floppy +- makedev ${arg}E3520 b $major `math $base + 108` $floppy +- makedev ${arg}E3840 b $major `math $base + 112` $floppy +- makedev ${arg}H1840 b $major `math $base + 116` $floppy +- makedev ${arg}D800 b $major `math $base + 120` $floppy +- makedev ${arg}H1600 b $major `math $base + 124` $floppy ++ makedev ${arg}u1760 b $major `math $base + 96` $floppy ++ makedev ${arg}u1920 b $major `math $base + 100` $floppy ++ makedev ${arg}u3200 b $major `math $base + 104` $floppy ++ makedev ${arg}u3520 b $major `math $base + 108` $floppy ++ makedev ${arg}u3840 b $major `math $base + 112` $floppy ++ makedev ${arg}u1840 b $major `math $base + 116` $floppy ++ makedev ${arg}u800 b $major `math $base + 120` $floppy ++ makedev ${arg}u1600 b $major `math $base + 124` $floppy ++ ;; ++ ed[a-b]) ++ major=`Major ed 36` || continue ++ unit=`suffix $arg ed` ++ base=`index ab $unit` ++ base=`math $base \* 64` ++ makedev ed$unit b $major $base $disk ++ for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20 ++ do ++ makedev ed$unit$part b $major `math $base + $part` $disk ++ done + ;; + hd[a-b]) + major=`Major ide0` || major=`Major hd 3` || continue +@@ -372,7 +914,7 @@ + base=`index ab $unit` + base=`math $base \* 64` + makedev hd$unit b $major $base $disk +- for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20 ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + do + makedev hd$unit$part b $major `math $base + $part` $disk + done +@@ -383,9 +925,9 @@ + base=`index cd $unit` + base=`math $base \* 64` + makedev hd$unit b $major $base $disk +- for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20 ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + do +- makedev hd$unit$part b $major `expr $base + $part` $disk ++ makedev hd$unit$part b $major $(( $base + $part )) $disk + done + ;; + hd[e-f]) +@@ -394,9 +936,9 @@ + base=`index ef $unit` + base=`math $base \* 64` + makedev hd$unit b $major $base $disk +- for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20 ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + do +- makedev hd$unit$part b $major `expr $base + $part` $disk ++ makedev hd$unit$part b $major $(( $base + $part )) $disk + done + ;; + hd[g-h]) +@@ -405,18 +947,47 @@ + base=`index gh $unit` + base=`math $base \* 64` + makedev hd$unit b $major $base $disk +- for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20 ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ++ do ++ makedev hd$unit$part b $major $(( $base + $part )) $disk ++ done ++ ;; ++ hd[i-j]) ++ major=`Major ide4 56` || continue ++ unit=`suffix $arg hd` ++ base=`index ij $unit` ++ base=`math $base \* 64` ++ makedev hd$unit b $major $base $disk ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + do +- makedev hd$unit$part b $major `expr $base + $part` $disk ++ makedev hd$unit$part b $major $(( $base + $part )) $disk + done + ;; +- ht) ++ hd[k-l]) ++ major=`Major ide4 57` || continue ++ unit=`suffix $arg hd` ++ base=`index kl $unit` ++ base=`math $base \* 64` ++ makedev hd$unit b $major $base $disk ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ++ do ++ makedev hd$unit$part b $major $(( $base + $part )) $disk ++ done ++ ;; ++ ht0) + major=`Major ht0 37` || continue + # Only one IDE tape drive is currently supported; ht0. + makedev ht0 c $major 0 $tape +- makedev ht0 c $major 0 $tape + makedev nht0 c $major 128 $tape + ;; ++ pt) ++ major=`Major pt 96` || continue ++ for i in 0 1 2 3 ++ do ++ makedev pt$i c $major $i $tape ++ makedev npt$i c $major `math $i + 128` $tape ++ done ++ ;; + xd[a-d]) + major=`Major xd 13` || continue + unit=`suffix $arg xd` +@@ -425,31 +996,139 @@ + makedev xd$unit b $major $base $disk + for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20 + do +- makedev xd$unit$part b $major `expr $base + $part` $disk ++ makedev xd$unit$part b $major $(( $base + $part )) $disk + done + ;; +- sd[a-h]) ++ sd[a-z]) + major=`Major sd 8` || continue + unit=`suffix $arg sd` +- base=`index abcdefgh $unit` +- base=`math $base \* 16` ++ base=`index abcdefghijklmnopqrstuvwxyz $unit` ++ base=$(( $base * 16 )) ++ if [ $base -lt 256 ]; then ++ major=8 ++ else ++ major=65 ++ base=$(( $base - 256 )) ++ fi ++ makedev sd$unit b $major $base $disk ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ do ++ minor=$(( $base + $part )) ++ makedev sd$unit$part b $major $minor $disk ++ done ++ ;; ++ sd[a-d][a-z]) ++ unit=`suffix $arg sd` ++ unitmaj=`first $unit` ++ unitmin=`second $unit` ++ basemaj=`index Xabcd $unitmaj` ++ basemin=`index abcdefghijklmnopqrstuvwxyz $unitmin` ++ basemaj=`math $basemaj \* 416` ++ basemin=`math $basemin \* 16` ++ base=`math $basemaj + $basemin` ++ basemaj=`math $base / 256` ++ base=`math $base % 256` ++ major=`math basemaj \+ 64` ++ if [ $major -gt 71 ]; then ++ echo "$0: don't know how to make device \"$arg\"" >&2 ++ exit 0 ++ fi + makedev sd$unit b $major $base $disk +- for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + do +- minor=`expr $base + $part` ++ minor=$(( $base + $part )) + makedev sd$unit$part b $major $minor $disk + done ++ ;; ++ ad[a-p]) ++ major=`Major ad 28` || continue ++ unit=`suffix $arg ad` ++ base=`index abcdefghijklmnop $unit` ++ base=`math $base \* 16` ++ makedev ad$unit b $major $base $disk ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ do ++ minor=$(( $base + $part )) ++ makedev ad$unit$part b $major $minor $disk ++ done ++ ;; ++ dac960) ++ for ctr in 0 1 2 3 4 5 6 7 ++ do ++ $0 $opts dac960.$ctr ++ done ++ ;; ++ dac960.[0-7]) ++ [ -d rd ] || { ++ mkdir rd ++ chown root.root rd ++ chmod 755 rd ++ } ++ unit=`suffix $arg dac960.` ++ major=`math 48 + $unit` ++ minor=0 ++ for ld in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 \ ++ 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ++ do ++ makedev rd/c${unit}d${ld} b $major $minor $disk ++ minor=`math $minor + 1` ++ for part in 1 2 3 4 5 6 7 ++ do ++ makedev rd/c${unit}d${ld}p$part b $major $minor $disk ++ minor=`math $minor + 1` ++ done ++ done ++ ;; ++ ida) ++ for ctr in 0 1 2 # 3 4 5 6 7 ++ do ++ $0 $opts ida.$ctr ++ done ++ ;; ++ ida.[0-7]) ++ [ -d ida ] || { ++ mkdir ida ++ chown root.root ida ++ chmod 755 ida ++ } ++ unit=`suffix $arg ida.` ++ major=`math 72 + $unit` ++ minor=0 ++ for ld in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ do ++ makedev ida/c${unit}d${ld} b $major $minor $disk ++ minor=`math $minor + 1` ++ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ do ++ makedev ida/c${unit}d${ld}p$part b $major $minor $disk ++ minor=`math $minor + 1` ++ done ++ done ++ ;; ++ rom) ++ major=`Major rom 31` ++ for i in 0 1 2 3 4 5 6 7 ++ do ++ makedev rom$i b $major $i $disk ++ makedev rrom$i b $major `math $i +8` $disk ++ makedev flash$i b $major `math $i +16` $disk ++ makedev rflash$i b $major `math $i +24` $disk ++ done ++ ;; ++ nb[0-7]) ++ major=`Major nbd 43` || continue ++ minor=`suffix $arg nb` ++ makedev nb$minor b $major $minor $disk + ;; + loop) +- major=`Major loop` || continue + for part in 0 1 2 3 4 5 6 7 + do +- makedev loop$part b $major $part $disk ++ makedev loop$part b 7 $part $disk + done + ;; + md) +- major=`Major md` || continue +- for part in 0 1 2 3 ++ major=`Major md 9` || continue ++ for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + do + makedev md$part b $major $part $disk + done +@@ -457,42 +1136,129 @@ + st[0-7]) + major=`Major st 9` + unit=`suffix $arg st` +- makedev st$unit c $major $unit $tape +- makedev nst$unit c $major `math 128 + $unit` $tape ++ makedev st${unit} c $major $unit $tape ++ makedev nst${unit} c $major `math 128 + $unit` $tape ++ ++ makedev st${unit}l c $major `math 32 + $unit` $tape ++ makedev nst${unit}l c $major `math 160 + $unit` $tape ++ ++ makedev st${unit}m c $major `math 64 + $unit` $tape ++ makedev nst${unit}m c $major `math 192 + $unit` $tape ++ ++ makedev st${unit}a c $major `math 96 + $unit` $tape ++ makedev nst${unit}a c $major `math 224 + $unit` $tape + ;; + qic) + major=`Major tpqic02 12` ++ makedev ntpqic11 c $major 2 $tape ++ makedev tpqic11 c $major 3 $tape ++ makedev ntpqic24 c $major 4 $tape ++ makedev tpqic24 c $major 5 $tape ++ makedev ntpqic120 c $major 6 $tape ++ makedev tpqic120 c $major 7 $tape ++ makedev ntpqic150 c $major 8 $tape ++ makedev tpqic150 c $major 9 $tape + makedev rmt8 c $major 6 $tape + makedev rmt16 c $major 8 $tape + makedev tape-d c $major 136 $tape + makedev tape-reset c $major 255 $tape ++ $0 $opts qft + ;; + ftape) +- major=`Major mt 27` || continue ++ major=`Major qft 27` || continue + for unit in 0 1 2 3 + do +- makedev rft$unit c $major $unit $tape +- makedev nrft$unit c $major `math $unit + 4` $tape ++ makedev qft$unit c $major $unit $tape ++ makedev nqft$unit c $major `math $unit + 4` $tape ++ makedev zqft$unit c $major `math $unit + 16` $tape ++ makedev nzqft$unit c $major `math $unit + 20` $tape ++ makedev rawqft$unit c $major `math $unit + 32` $tape ++ makedev nrawqft$unit c $major `math $unit + 36` $tape ++ done ++ symlink ftape qft0 ++ symlink nftape nqft0 ++ ;; ++ sr|scd|scd-all) ++ major=`Major sr 11` || continue ++ for unit in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ++ do ++ makedev scd$unit b $major $unit $cdrom ++ symlink sr$unit scd$unit + done +- symlink ftape rft0 +- symlink nftape nrft0 + ;; +- scd[0-7]) ++ cfs0) ++ makedev cfs0 c 67 0 $coda ++ ;; ++ scd[0-9]|scd[0-1][0-9]) + major=`Major sr 11` || continue + unit=`suffix $arg scd` + makedev scd$unit b $major $unit $cdrom ++ ln -f scd$unit sr$unit ++ ;; ++ ttyI[0-9]|ttyI[1-5][0-9]|ttyI[6][0-3]) ++ major=43 ++ unit=`suffix $arg ttyI` ++ makedev ttyI$unit c $major $unit $dialout ++ ;; ++ ippp[0-9]|ippp[1-5][0-9]|ippp[6][0-3]) ++ major=45 ++ unit=`suffix $arg ippp` ++ minor=`math $unit + 128` ++ makedev ippp$unit c $major $minor $dialout ++ ;; ++ isdn[0-9]|isdn[1-5][0-9]|isdn[6][0-3]) ++ major=45 ++ unit=`suffix $arg isdn` ++ minor=`math $unit + 0` ++ makedev isdn$unit c $major $minor $dialout ++ ;; ++ isdnctrl[0-9]|isdnctrl[1-5][0-9]|isdnctrl[6][0-3]) ++ major=45 ++ unit=`suffix $arg isdnctrl` ++ minor=`math $unit + 64` ++ makedev isdnctrl$unit c $major $minor $dialout ++ ;; ++ isdninfo) ++ makedev isdninfo c 45 255 $dialout ++ ;; ++ isdn-tty) ++ major=43 ++ for unit in 0 1 2 3 4 5 6 7 ++ do ++ makedev ttyI$unit c $major $unit $dialout ++ done ++ ;; ++ isdn-ippp) ++ major=45 ++ for unit in 0 1 2 3 4 5 6 7 ++ do ++ makedev ippp$unit c $major `math $unit + 128` $dialout ++ done ++ ;; ++ isdn-io) ++ for unit in 0 1 2 3 4 5 6 7 ++ do ++ makedev isdn$unit c 45 $unit $dialout ++ makedev isdnctrl$unit c 45 `math $unit + 64` $dialout ++ makedev ippp$unit c 45 `math $unit + 128` $dialout ++ done ++ makedev isdninfo c 45 255 $dialout + ;; + sonycd) +- major=`Major cdu31a` || continue ++ major=`Major sonycd 15` || continue + makedev $arg b $major 0 $cdrom + ;; + mcd) + major=`Major mcd 23` || continue + makedev $arg b $major 0 $cdrom + ;; +- mcdx) +- major=`Major mcdx 20` || continue +- makedev $arg b $major 0 $cdrom ++ mcdx|mcdx[0-4]) ++ major=`Major $arg 20` || continue ++ for unit in 0 1 2 3 4 ++ do ++ makedev mcdx$unit b $major $unit $cdrom ++ done ++ test -r mcdx || symlink mcdx mcdx0 + ;; + cdu535) + makedev $arg b 24 0 $cdrom +@@ -501,28 +1267,51 @@ + makedev $arg b 24 0 $cdrom + ;; + sbpcd|sbpcd[123]) +- major=`Major $arg` || continue ++ major=`Major $arg 25` || continue + base=`suffix ${arg}0 sbpcd` +- # base=`expr ${arg}0 : "sbpcd\(.\)"` + for minor in 0 1 2 3 + do + # XXX +- unit=`expr substr 0123456789abcdef \( $base \* 4 + $minor + 1 \) 1` ++ unit=$(substr 0123456789abcdef $(( $base * 4 + $minor + 1 )) ) + makedev sbpcd$unit b $major $minor $cdrom + done + [ $arg = sbpcd ] && symlink $arg ${arg}0 + ;; + aztcd) +- major=`Major $arg` || continue ++ major=`Major $arg 29` || continue ++ makedev ${arg}0 b $major 0 $cdrom ++ ;; ++ cm206cd) ++ major=`Major $arg 30` || continue ++ makedev ${arg}0 b $major 0 $cdrom ++ ;; ++ gscd) ++ major=`Major $arg 16` || continue + makedev ${arg}0 b $major 0 $cdrom + ;; + bpcd) + makedev $arg b 41 0 $cdrom + ;; ++ optcd) ++ makedev $arg b 17 0 $cdrom ++ ;; ++ sjcd) ++ makedev $arg b 18 0 $cdrom ++ ;; ++ cfs|coda) ++ makedev cfs0 c 67 0 $private ++ ;; ++ xfs|arla) ++ makedev xfs0 c 103 0 $private ++ ;; + logiscan) + major=`Major logiscan` || continue + makedev $arg c $major 0 $scanner + ;; ++ toshiba) ++ major=`Major $arg 10` || continue ++ makedev $arg c $major 181 root root 0666 ++ ;; + m105scan) + major=`Major m105` || continue + makedev $arg c $major 0 $scanner +@@ -534,34 +1323,119 @@ + audio) + major=`Major sound 14` + makedev mixer c $major 0 $audio ++ makedev mixer1 c $major 16 $audio ++ makedev mixer2 c $major 32 $audio ++ makedev mixer3 c $major 48 $audio + makedev sequencer c $major 1 $audio + makedev midi00 c $major 2 $audio +- makedev dsp c $major 3 $audio +- makedev audio c $major 4 $audio +- makedev sndstat c $major 6 $audio +-# makedev sequencer2 c $major 8 $audio +- makedev mixer1 c $major 16 $audio +-# makedev patmgr0 c $major 17 $audio + makedev midi01 c $major 18 $audio +- makedev dsp1 c $major 19 $audio +- makedev audio1 c $major 20 $audio +-# makedev patmgr1 c $major 33 $audio + makedev midi02 c $major 34 $audio + makedev midi03 c $major 50 $audio ++ makedev dsp c $major 3 $audio ++ makedev dsp1 c $major 19 $audio ++ makedev dsp2 c $major 35 $audio ++ makedev dsp3 c $major 51 $audio ++ makedev audio c $major 4 $audio ++ makedev audio1 c $major 20 $audio ++ makedev audio2 c $major 36 $audio ++ makedev audio3 c $major 52 $audio ++ makedev sndstat c $major 6 $audio ++ makedev audioctl c $major 7 $audio ++ major=31 ++ makedev mpu401data c $major 0 $audio ++ makedev mpu401stat c $major 1 $audio ++ major=35 ++ for i in 0 1 2 3 ++ do ++ makedev midi$i c $major $i $audio ++ makedev rmidi$i c $major `math $i + 64` $audio ++ makedev smpte$i c $major `math $i + 128` $audio ++ done + ;; + pcaudio) +- major=`Major pcsp` || continue ++ major=`Major pcsp 13` || continue + makedev pcmixer c $major 0 $audio + makedev pcsp c $major 3 $audio + makedev pcaudio c $major 4 $audio + ;; +- sg) ++ video|video4linux|v4l|radio) ++ # video4linux api includes radio, teletext, etc. ++ major=`Major video 81` || continue ++ minor=0 ++ until [ $minor -gt 63 ] ++ do ++ makedev video$minor c $major $minor $video ++ makedev radio$minor c $major `math $minor + 64` $video ++ minor=`math $minor + 1` ++ done ++ symlink radio radio0 ++ minor=0 ++ until [ $minor -gt 31 ] ++ do ++ makedev vtx$minor c $major `math $minor + 192` $video ++ makedev vbi$minor c $major `math $minor + 224` $video ++ minor=`math $minor + 1` ++ done ++ symlink video video0 ++ symlink vbi vbi0 ++ major=82 ++ minor=0 ++ until [ $minor -gt 1 ] ++ do ++ makedev winradio$minor c $major $minor $video ++ minor=`math $minor + 1` ++ done ++ major=83 ++ makedev vtx c $major 0 $video ++ makedev vttuner c $major 16 $video ++ ;; ++ i2c) ++ major=`Major i2c 89` || continue ++ minor=0 ++ until [ $minor -gt 1 ] # tell me if 1 is wrong... ++ do ++ makedev i2c-$minor c $major $minor $private ++ minor=`math $minor + 1` ++ done ++ ;; ++ tlk) ++ major=102 ++ minor=0 ++ until [ $minor -gt 3 ] # tell me if 3 is wrong... ++ do ++ makedev tlk$minor c $major $minor $video ++ minor=`math $minor + 1` ++ done ++ ;; ++ srnd) ++ makedev srnd0 c 110 0 $video ++ makedev srnd1 c 110 1 $video ++ ;; ++ fgrab) ++ makedev mmetfgrab c 40 0 $video ++ makedev wvisfgrab c 26 0 $video ++ for i in 0 1 # more? ++ do ++ makedev iscc$i c 93 $i $video ++ makedev isccctl$i c 93 `math $i + 128` $video ++ done ++ for i in 0 1 # more? ++ do ++ makedev dcxx$i c 94 $i $video ++ done ++ ;; ++ sg|sg-all) + major=`Major sg 21` +- for unit in a b c d e f g h ++ for unit in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + do +- minor=`index abcdefgh $unit` +- # minor=`expr abcdefgh : ".*$unit" - 1` +- makedev $arg$unit c $major $minor $scsi ++ makedev sg$unit c $major $unit $scsi ++ done ++ ;; ++ pg) ++ major=`Major pg 97` ++ for unit in 0 1 2 3 ++ do ++ makedev pg$unit c $major $unit $scsi + done + ;; + fd) +@@ -572,15 +1446,34 @@ + symlink stderr fd/2 + ;; + ibcs2) +- major=`Major ibcs2` || continue ++ major=`Major ibcs2 30` || continue + makedev socksys c $major 0 $ibcs2 + symlink nfsd socksys + makedev spx c $major 1 $ibcs2 + symlink X0R null + ;; ++ netlink) ++ major=36 ++ makedev route c $major 0 $private ++ makedev skip c $major 1 $private ++ ;; ++ enskip) ++ major=64 ++ makedev enskip c $major 0 $private ++ ;; ++ ipfilt*) ++ major=95 ++ makedev ipl c $major 0 $private ++ makedev ipnat c $major 1 $private ++ makedev ipstate c $major 2 $private ++ makedev ipauth c $major 3 $private ++ ;; ++ qng) ++ makedev qng c 77 0 $private ++ ;; + apm) +- major=`Major apm_bios` || continue +- makedev $arg c $major 0 $system ++ major=`Major mouse 10` || continue ++ makedev apm_bios c $major 134 $mouse + ;; + dcf) + major=`Major dcf` || continue +@@ -590,6 +1483,11 @@ + major=`Major hw` || continue + makedev helloworld c $major 0 $public + ;; ++ ipsec) ++ # For the Free S/WAN (http://www.xs4all.nl/~freeswan/) ++ # implementation of IPSEC ++ makedev ipsec c 36 10 $ipsec ++ ;; + update) + if [ ! "$devices" ] + then +@@ -619,7 +1517,6 @@ + create="$create "`cvt $device` + fi + devs=`strip " $devs " $device` +- # devs=`expr "$devs" : "\(.*\) $device"``expr "$devs" : ".* $device\(.*\)"` + done + exec 3<&- + fi +@@ -637,6 +1534,7 @@ + ;; + *) + echo "$0: don't know how to make device \"$arg\"" >&2 ++ exit 1 + ;; + esac + done +--- makedev-2.3.1.orig/Makefile ++++ makedev-2.3.1/Makefile +@@ -1,14 +1,15 @@ + # $Id: Makefile,v 2.2 1995/05/21 17:45:18 alfie Exp $ + ++BINDIR = $(ROOT)/sbin + DEVDIR = $(ROOT)/dev +-MANDIR = $(ROOT)/usr/man ++MANDIR = $(ROOT)/usr/share/man + MANEXT = 8 + + default: + @echo Nothing to make. + + install: +- install -m 755 MAKEDEV $(DEVDIR) ++ install -m 755 MAKEDEV $(BINDIR) + install -m 644 MAKEDEV.man $(MANDIR)/man$(MANEXT)/MAKEDEV.$(MANEXT) + + clean: +--- makedev-2.3.1.orig/debian/old/README.debian ++++ makedev-2.3.1/debian/old/README.debian +@@ -0,0 +1,95 @@ ++makedev for DEBIAN ++================== ++ ++The /etc/makedev.cfg and /etc/devinfo files are rewritten to fit the ++Debian /dev layout. ++ ++Security : all mouse devices are changed to mode 600. Only serial ++devices are mode 660 root:dialout. It's possible to crash x11 and ++console with writing random bytes to a mouse device. ++ ++Serial console : ++/dev/console should be a symlink to your real console device. ++If it does not exist, or is not a symlink, it will be replaced with a ++symlink console -> tty0. ++ ++This version of makedev will check /dev for tty*/pty* devices, and if ++there are some with the old major number, it will create a ++/etc/rc.boot/makedev script. This will script will change the ++master/slave devices the next time you boot. ++ ++serial devices should be owned by user "uucp" and group "dialout". ++former they were owned by root. new devices are created with uucp as ++owner, but you will have to change old devices to user uucp on your own. ++It's new policy to have all serial devices owned by uucp, but the last ++word in this discussion isn't said... ++ ++some device names have changed. please read ++/usr/doc/makedev/devices.{txt|html} ++ ++the permissions should be secure enough, but if you find any bugs, or ++unfounded hard permissions, please let me know (i don't know much about ++the right permissions for devices, i yust used the value, everybody else ++was using, and made read & write only available for root, whenever i ++found nothing better. ++ ++/dev/console is now a symlink to /dev/tty0. for more infomation, please ++look at a new 2.1 linux kernel : Documentation/devices.txt. That is the ++"Linux Allocated Device" paper, the official list of linux devices. ++If your boot console is a serial device, you will have to change that ++symlink. ++ ++MAKEDEV-C will not work with any kernel with mcdx support, if ++/proc/devices contains "Mitsumi CD-ROM". if so, patch ++/usr/src/linux/driver/cdrom/mcdx.c : ++1149c1149 ++< if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) { ++--- ++> if (unregister_blkdev(MAJOR_NR, DEVICE_NAME) != 0) { ++1270c1270 ++< if (register_blkdev(MAJOR_NR, "mcdx", &mcdx_fops) != 0) { ++--- ++> if (register_blkdev(MAJOR_NR, DEVICE_NAME, &mcdx_fops) != 0) { ++ ++ ++about call out devices (/dev/cu*) : ++ ++ /dev/ttySxx devices are fully POSIX-compliant TTY devices. If you ++ are only going to be using one set of tty devices, you should be ++ using /dev/ttySxx. ++ ++ /dev/cuaXX devices are different from /dev/ttySXX in two ways --- ++ first of all, they will allow you to open the device even if ++ CLOCAL is not set and the O_NONBLOCK flag was not given to the ++ open device. This allows programs that don't use the ++ POSIX-mondated interface for opening /dev/ttySxx devices to be ++ able to use /dev/cuaXX to make outgoing phone calls on their modem ++ (cu stands for "callout", and is taken from SunOS). ++ ++ The second way in which /dev/cuaXX differs from /dev/ttySXX is ++ that if they are used, they will trigger a simplistic kernel-based ++ locking scheme: If /dev/ttySXX is opened by one or more processes, ++ then an attempt to open /dev/cuaXX will return EAGAIN. If ++ /dev/cuaXX is opened by one or more processes, then an attempt to ++ open /dev/ttySXX will result the open blocking until /dev/cuaXX is ++ closed, and the carrier detect line goes high. the open blocking ++ until /dev/cuaXX is closed, and the carrier detect line goes high. ++ ++ While this will allow for simple lockouts between a user using a ++ modem for callout and a getty listening on the line for logins, it ++ doesn't work if you need to arbitrate between multiple programs ++ wanting to do dialout --- for example, users wanting to do dialout ++ and UUCP. ++ ++ I originally implemented the cuaXX/ttySXX lockout mechanism back ++ before FSSTND established a standard convention for the use of tty ++ lock files. Now that it's there, people should use the tty lock ++ files and not try using /dev/cuaXX. The only reason why ++ /dev/cuaXX hasn't disappeared yet is for backwards compatibility ++ reasons. -- Theodore Ts'o <tytso@mit.edu> ++ ++ ++debian has no /dev/cu* devices. But you can create them, if you need ++them. Read devices.txt for details. ++ ++Andreas Jellinghaus <aj@debian.org>, Sun, 13 Apr 1997 21:05:58 +0200 +--- makedev-2.3.1.orig/debian/old/devices.sgml ++++ makedev-2.3.1/debian/old/devices.sgml +@@ -0,0 +1,294 @@ ++<!doctype linuxdoc system> ++ ++<article> ++ ++<title>devices created by makedev ++<author> Andreas Jellinghaus <tt>aj@debian.org</tt> ++<date> version 0.3, based on Linux allocated device 2.1.62 ++<abstract> ++ some devices are created by default, some are left out on boot ++ floppies, other devices are only created on demand and some ++ devices are obsolete or have new names. ++</abstract> ++ ++<sect> batches <p> ++ ++call out devices are not generated by default. however if you need them, ++you can generate them (see below). ++ ++<descrip> ++<tag/generic/all standard batches for normal Linux\/i386 systems. ++ (standard misc devices, ttyS[0-3], mouse, printer, tapes ++ (scsi, qic, qic117), audio, scsi generic, standard disk, cdroms ++ and ttys) ++<tag/generic-m68k/all generic devices for m68k (additional ++ framebuffer, some mouse devices and m68k scsi disk devices are ++ included, ++ but busmouse devices and qic and qic117 are left out). ++<tag/boot-floppy/a subset of generic. (no audio, less ttys) ++<tag/std-hd/standard hard disks (hd[a-h,xd[ab],sd[a-h],ram disk,md,loop) ++<tag/std-cdrom/standard cdroms (scsi, old non-scsi non-atapi cdroms) ++<tag/compatiblity/collection of old devices. It is usefull to remove them, but ++make sure, that you have generated the new ones, and that you know, what ++you are doing ! serial-cu, printer-old, mouse-old, sr-old, ++qic-old, misc-old, sg-old ++<tag/update/special tag : reads \/proc\/devices and generates new devices ++ found there. ++</descrip> ++ ++<sect> Limits (standard devices) <p> ++ ++There are some limits in this version of devinfo : it will only create a ++special number of devices (e.g. ramdisks, hda partitions). If one of ++these limits is unrealistic, please tell me. Most limits have no good ++reason, I just didn't want to create hundreds of devices, so I only ++created a few. If a limit is too low for you : a) please tell me and b) ++modify /etc/devinfo (should be easy). <p> ++ ++<descrip> ++<tag/ramdisks/8 devices ram[0-7] ++<tag/ide harddisks/20 partitions each (devices hd[a-h]) ++<tag/xt harddisks/20 partitions each (devices xd[ab] ++<tag/loopback/8 devices loop[0-7] ++<tag/metadisk/4 devices md[0-3] ++<tag/scsi cdrom/scd: 8 devices scd[0-7] ++<tag/scsi cdrom/scd-all : 16 devices scd[0-15] ++<tag/scsi generic/sg : 8 devices sg[0-7] ++<tag/scsi generic/sg-all : 16 devices sg[0-15] ++<tag/scsi tapes/8 devices st[0-7] ++<tag/mscdex/4 cdrom devices dos_cd[0-3] ++<tag/joysticks/2 devices each js[0-1] djs[0-1] ++<tag/other cdroms/only one device created : sonycd, gscd, optcd, sjcd, ++hitcd, mcd, cdu535, aztcd, cm206cd, bpcd (if there are several cdroms ++possible : please tell me !) ++<tag/serial/default bootdisks and base system will only have ttyS[0-3], ++but you can create all possible devices ttyS[0-63] with "MAKEDEV serial" ++or several additional devices with "MAKEDEV ttyS4 ttyS5 ...". ++</descrip> ++ ++<sect> additional devices <p> ++ ++you can create these devices with "MAKEDEV name" and delete them with ++"MAKEDEV -d name". you can either use the name listed here (this will ++create all possible devices), or individual devices (use the device ++name) e.g. "serial" will create all 64 serial devices ttyS[0-63] but ++"ttyS0" will only create this one. ++ ++<sect1> serial devices <p> ++ ++<descrip> ++<tag/isdn-tty/isdn terminal devices. 8 devices : ttyI[0-7] ++<tag/isdn-tty-all/isdn terminal devices. 64 devices : ttyI[0-63] ++ ++<tag/isdn-ppp/isdn sync ppp network devices. 8 devices : ippp[0-7] ++<tag/isdn-ppp-all/isdn sync ppp network devices. 64 devices : ippp[0-63] ++ ++<tag/isdn-io/isdn raw and control devices. 18 devices : ++ isdn[0-7] isdnctrl[0-7] isdnctrl isdninfo ++<tag/isdn-io-all/isdn raw and control devices. 130 devices : ++ isdn[0-63] isdnctrl[0-63] isdnctrl isdninfo ++ ++<tag/serial-cu/serial callout devices. they are only for compatibility, ++most people don't need them. 64 devices : cua[0-63] ++ ++<tag/isdn-cu/isdn call out devices. they are only for compatibility, ++most people don't need them. 64 devices : cui[0-7] ++<tag/isdn-cu-all/isdn call out devices. they are only for compatibility, ++most people don't need them. 64 devices : cui[0-63] ++ ++<tag/chase{-cu}/devices for chase serial card (append -cu to create ++call out devices). 32 devices ttyH[0-31] (cuh[0-31]) ++ ++<tag/cyclades{-cu}/devices for cyclades serial card (append -cu to create ++call out devices). 32 devices ttyC[0-31] (cub[0-31]) ++ ++<tag/digiboard{-cu}/devices for digiboard serial card (append -cu to create ++call out devices). 32 devices ttyD[0-31] (cud[0-31]) ++ ++<tag/stallion{-cu}/devices for stallion serial card (append -cu to create ++callout devices). 32 devices ttyE[0-31] (cue[0-31]) ++ ++<tag/stallion-mem/devices to access stallion serial card. 4 devices ++stallionmem[0-3] ++ ++<tag/specialix{-cu}/devices for specialix serial card (append -cu to create ++call out devices). 32 devices ttyX[0-31] (cux[0-31]) ++ ++<tag/rockport{-cu}/devices for rockport serial card (append -cu to create ++call out devices). 32 devices ttyR[0-31] (cur[0-31]) ++ ++<tag/riscom{-cu}/devices for riscom serial card (append -cu to create ++call out devices). 32 devices ttyL[0-31] (cul[0-31]) ++ ++<tag/hayes{-cu}/devices for hayes serial card (append -cu to create ++call out devices). 32 devices ttyP[0-31] (cup[0-31]) ++ ++<tag/baycom/devices for baycom radio modem. 32 devices bc[0-31] ++ ++<tag/computone{-cu}/devices for computone intelliport II serial card ++(append -cu to create call out devices). 32 devices ttyF[0-31] ++(cuf[0-31]) ++ ++<tag/computone-ctrl/devices to access computone intelliport II serial ++card. 8 devices ip2ipl[0-3] and ip2stat[0-3] ++ ++<tag/dcbri/spellcaster datacomm\/bri isdn card. 4 devices dcbri[0-3] ++<tag/specialix{-cu}/devices for specialix IO8+ serial card. 32 devices ++ttyW[0-31] (cuw[0-32]) ++<tag/pam{-cu}/devices for PAM Software's mulitmodem boards. 32 devices ++ttyM[0-31] (cum[0-31]) ++</descrip> ++ ++<sect1> misc devices <p> ++ ++<descrip> ++<tag/pty[p-za-e]/master pty devices. 16 devices pty?[0-9a-f] each ++<tag/tty[p-za-e]/slave tty devices. 16 devices pty?[0-9a-f] each ++<tag/floppy-all/generic only includes the fd0 and fd1 devices. this way ++you can generate devices for the 3rd ... 8th floppies. i recommend to ++install fdutils and use MAKEFLOPPIES to create the floppy devices you ++need. 30 devices each fd[0-7]* ++ ++<tag/framebuffer/universal frame buffer (68k,sparc). ++ 22 devices fb0* fb1* ++<tag/other-arch/amigamouse, atarimouse, sunmouse, openprom, kbd ++<tag/double/"double" compressed disk. 16 devices [c]double[0-7] ++<tag/ez[a-d]/syquest ex135 parallel port removable drive. ++ 20 partitions each ++<tag/ed[ab]/mca esdi hard disk. 20 partitions ed?* each ++ ++<tag/sbpcd[234]/2nd,3rd,4th sound blaster cdrom controller. 4 devices sbpcdXX each ++<tag/mscdex/MSCDEX CD-ROM callback support. 4 devices dos_cd[0-3] ++<tag/cm205cd/cm205 cdrom devices (not supported in 2.x). ++ 2 device cm205cd lmscd ++<tag/ad[a-p]/acsi disc\/cdrom (68k\/atari). 16 devices ad?* each ++<tag/gs4500/genius 4500 handheld scanner. 1 device gs4500 ++<tag/slm/atari sm asci laser printer (68k\/atari). 4 devices slm[0-3] ++<tag/ht/ide tape. 2 devices ht0 nht0 ++<tag/z2ram/zorro II ramdisk. 1 device z2ram ++<tag/cfs/coda network file-system. ++ 1 device cfs0 ++<tag/dtlk/DoubleTalk PC speech synthesizer, from RC Systems. 1 device dtlk ++ ++<tag/ibcs2/ibcs2 devices as described in "Linux Allocated Devices". ++you need to create the directory /dev/inet before running makedev. ++ibcs2-unoff has lots more devices (i don't know if all are needed, or ++not. in doubt use ibcs2-unoff). 9 devices (socksys spx nfsd X0R inet/*). ++ ++<tag/ibcs2-unoff/ibcs2 devices as described in the ibcs2 package. you ++need to create the directories "X" and "inet" before creating these ++devices. 74 devices (arp egp ggp icmp ip ipip pup rawip rip tcp udp nfsd ++X0R socksys spx pty[10-47] inet/* X/*) ++ ++<tag/nvram/some special m68k hardware ? 1 device nvram ++ ++<tag/system-sgi/devices for linux/sgi. 5 devices graphics opengl gfx ++input/mouse input/keyboard ++ ++<tag/nb/network block devices. 8 devices nb* ++<tag/ftl/flash translatio layer (FTL) filesystems. max. 16 drives a-p ++with each 15 partitions (like scsi disks sd*). ++<tag/qng/Quantum Noice Generator. 1 device qng ++<tag/at200/Photometrics AT200 CCD camera. 1 device at200 ++<tag/bttv/Brooktree Bt848 frame grabbers. 12 devices bttv[0-3] ++bttvc[0-3] bttv-vbi[0-3] ++<tag/winradio/WiNRADiO communications receiver card. 4 devices ++winradio[0-3] ++<tag/videotext/Teletext/videotext interfaces 2 devices vtx vttuner ++<tag/ihcp/ikon 1011[57] Versatec Greensheet Interface. 2devices ihcp[0-1] ++<tag/shimq/Linux/SGI shared memory input queue. 5 devices shmiq ++qcntl[0-3] ++<tag/sch/SCSI media changer. 8 devices sch[0-7] ++<tag/controla/Sony control-a1 stereo control bus. ++</descrip> ++ ++<sect1> sound <p> ++<descrip> ++<tag/mpu401/mpu401 MIDI data & status ports. ++ 2 devices mpu401{data,stat} ++<tag/tclmidi/tclmidi midi driver. ++ 12 devices midi[0-3] rmidi[0-3] smpte[0-3] ++</descrip> ++ ++<sect1> misc <p> ++<descrip> ++<tag/wvisfgrab/quanta winvision frame grabber. ++ 1 device wvisfrab ++<tag/mmetfgrab/matrox meteor frame grabber. ++ 1 device mmetfgrab ++<tag/ml16p[abc]/ml-16p experimental i\/o board. ++ 20 device ml16p?* each ++<tag/scc/Z8530 HDLC driver. 8 devices scc[0-7] ++<tag/rom/rom\/flash memory card. ++ 32 devices rom[0-7] rrom[0-7] flash[0-7] rflash[0-7] ++<tag/netlink/netlink support. 2 devices route skip ++<tag/mlanai/myricom pci myrinet board. 8 devices mlanai[0-7] ++<tag/yamm/yet another micro monitor. 1 device yamm ++<tag/bdm/bdm interface for remote debugging MC683xx mc. ++ 6 devices pd_bdm[0-2] icd_bdm[0-2] ++<tag/holter/electrocardiognosis holter serial port. ++ 3 devices holter[0-2] ++<tag/dsp56k/dsp56001 digital signal processor. ++ 1 device dsp56k ++<tag/adbus/apple desktop bus. this was disabled, because it clashes with ++ab[b], the second acsi device (m68k/atari acsi disk). ++ 1 device adb ++<tag/firewall/sf firewall package. ++ 1 device firewall ++<tag/plink/sundance plink transputer boards. ++ 12 devices [r]plink[0-3][d] ++<tag/enskip/enskip kernel encryption package ++<tag/yppcpci/yarc powerpc pci coprocessor card ++<tag/capi20/CAPI 2.0 interface. ++ 21 devices capi20 capi20.[01-19] ++<tag/ma16/ma16 numeric accelerator card ++<tag/aps/spellcaster protocol service interface. ++ 7 devices aps* ++<tag/sci/dolphin interconnect solutions' pci-sci bridge. ++ 4 devices SCI\/[0-3] ++</descrip> ++ ++<sect> compatibility <p> ++ ++not all devices have a standard device name shared by all linux ++distributions, and many names have changed in the past. here is a list, ++so you can find new names, create the old devices (if you want), or ++remove them (to get rid of duplicates). ++ ++<descrip> ++<tag/call out devices/cu* devices are not created by default. but you ++can create or remove them : serial-cu chase-cu cyclades-cu digiboard-cu ++stallion-cu specialix-cu isdn-cu rockport-cu riscom-cu hayes-cu ++computone-cu ++<tag/printer-old/parallel port devices, standard name is lp[0-3], not par[0-3] ++<tag/mouse-old/(bus-)mouse devices : logimouse(logibm) psmouse(psaux) ++msmouse(inportbm) atimouse(atibm) jmouse(jbm) ++<tag/sr-old/scsi cdrom devices (now called scd) ++<tag/qic-old/qic streamer devices : nqt qt nqt11 qt11 nqt24 qt24 nqt120 ++qt120 nqt150 qt150 qt-reset ++<tag/misc-old/for standardized names, some devices got renamed. old : ++midi, sbpcd, aztcd0, vcs0, lmscd, ramdisk ++new : midi00, sbpcd0, aztcd, vcs, ram0, cm205cd, ram0 ++<tag/sg-old/scsi generic devices now use numbers (sg[0-7]), not letters ++sg[a-h]) ++<tag/isdn-old/an old version created ipp* devices. this was a typo, they ++are called ippp* ++</descrip> ++ ++i left some links : even if they are for compatibility, removing them ++might break existing software. ++ ++<descrip> ++<tag/isdnctrl/link to "isdnctrl0" ++<tag/mfd0/m68k amiga hd floppy device ++</descrip> ++ ++<sect> note about console and tty0 <p> ++ ++New standard is : /dev/tty0 is a device (char,4,0). ++console should be a symlink : to tty0, or whatever your console is. ++If it is not a symlink, makedev will replace it with a symlink to tty0. ++Someday there will be a kernel managed device /dev/console to handle ++this (it will be char 5 1). ++ ++</article> +--- makedev-2.3.1.orig/debian/changelog ++++ makedev-2.3.1/debian/changelog +@@ -0,0 +1,747 @@ ++makedev (2.3.1-46.2) stable unstable; urgency=low ++ ++ * non-maintainer update ++ * argh, target stable and unstable ++ ++ -- Adam Di Carlo <aph@debian.org> Sun, 15 Oct 2000 14:01:16 -0400 ++ ++makedev (2.3.1-46.1) unstable; urgency=low ++ ++ * non-maintainer update ++ * 'symlink mcdx mcdx0' was reversed (one line patch) ++ ++ -- Adam Di Carlo <aph@debian.org> Sun, 15 Oct 2000 04:36:30 -0400 ++ ++makedev (2.3.1-46) stable unstable; urgency=medium ++ ++ * fix silly symlink loop between ram and ram1, closes: #69475, #69351 ++ * fix similar symlink reversal between scd and sr devices, and make 'sr' ++ a valid target, not just when using 'update', closes: #69500 ++ * change agpart to agpgart as per devices.txt, closes: #69319 ++ * add sg* devices to generic targets that include SCSI, closes: #69231 ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 29 Aug 2000 01:13:30 -0600 ++ ++makedev (2.3.1-45) stable unstable; urgency=low ++ ++ * incorporates work done by Martin Schulze <joey@finlandia.infodrom.north.de> ++ with my profound thanks. ++ * Added gscd and cm206cd device files, closes: #69057 ++ * Corrected mcdx drivers, support all five drives, closes: #69058 ++ * Corrected symlink creation (i.e. use symlink() instead of ln -s) ++ * Added /dev/toshiba (Toshiba laptop SMM support), closes: #54729, #59242 ++ * Added sdc and sdd to generic-m68k since they were missing, closes: #61027 ++ * Made joystick devices readable by everybody (closes: Bug#61499) ++ * Added '$opts' whenever $0 aka MAKEDEV gets called, thus `-n' is passed ++ to the child properly, closes: #63159 ++ * Added hyphen `-' between i2c and the number as described by devices.txt, ++ closes: #63523 ++ * Fixed wrong creation of hdi hdj hdk and hdl, closes: #64881 ++ * Added hdc and hdd to generic-powerpc since they were missing, ++ closes: #65852 ++ * Added support for ttyI and cui (ignored) to 'update' target by ++ modifying cvt(), closes: #66838 ++ * Corrected a whole bunch of math errors where a `$' was missing, trying ++ to add 1 to 'minor', closes: #68915 ++ * Fixed /proc/devices-parser to ignore slashes, closes: #31854 ++ * Removed out-dated Replaces, closes: #61256 ++ * Added audioctl, closes: #60755 ++ * Added agpart, closes: #61084 ++ * Adjusted 3dfx to have file mode $video instead of $audio ++ * Added ipmikcs (Intelligent Platform Management) with mode 0600 (mode ++ may be unpracticable), closes: #67431 ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 15 Aug 2000 21:52:23 -0600 ++ ++makedev (2.3.1-44) frozen unstable; urgency=low ++ ++ * patch from tausq for a case I missed when converting expr to $(( )), ++ fixes problem creating sbpcd devices. Target frozen since this was ++ marked release-critical. Closes: #63585 ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 6 May 2000 20:24:40 -0600 ++ ++makedev (2.3.1-43) frozen unstable; urgency=low ++ ++ * add invocation of '/sbin/MAKEDEV std' to postinst to ensure key devices ++ have proper owner/group/perms on upgrades, closes: #61367 ++ * replace /dev/MAKEDEV references with /sbin/MAKEDEV references in the ++ postinst ++ * target frozen since broken perms on /dev/tty keeps xterm from working ++ which is very confusing and frustrating on upgrades. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 3 May 2000 14:27:04 -0600 ++ ++makedev (2.3.1-42) frozen unstable; urgency=low ++ ++ * eliminate the use of expr, since it is in /usr, which may not be mounted ++ during system recovery when makedev is often needed. Target frozen since ++ this was tagged release critical, closes: #62925 ++ ++ -- Bdale Garbee <bdale@gag.com> Mon, 24 Apr 2000 22:27:18 -0600 ++ ++makedev (2.3.1-41) frozen unstable; urgency=low ++ ++ * Arrange for all scd* devices to have hardlinked sr* counterparts as per ++ devices.txt. Target frozen since this is release critical, closes: #61862 ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 7 Apr 2000 20:01:39 -0600 ++ ++makedev (2.3.1-40) frozen unstable; urgency=low ++ ++ * fix flakey code for discovering proper major numbers for several device ++ types. This broke the raidtools postinst in some cases, which I think ++ makes this worth adding to frozen, even though there's no bug in the BTS ++ about it (problem reported and fixed during an IRC session). There are ++ still a few potential major number problems in MAKEDEV, but they're all ++ for obscure devices that are not in devices.txt, and which I'll therefore ++ probably remove entirely when rewriting makedev for woody. ++ * fix type, smtpe should be smpte, closes: #59061 ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 19 Mar 2000 20:28:30 -0700 ++ ++makedev (2.3.1-39) frozen unstable; urgency=low ++ ++ * add missing major number clause to thinkpad/smapi device, closes: #57381 ++ target frozen since this is clearly release-critical ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 9 Feb 2000 12:07:07 -0700 ++ ++makedev (2.3.1-38) frozen unstable; urgency=low ++ ++ * target frozen since 56724 was tagged release-critical ++ * rework ftape stuff to match 2.2 kernel device definitions, closes: #56724 ++ * add code to create /dev/smapi and symlink it as /dev/thinkpad. This can ++ be called as either smapi or thinkpad. Closes: #54714 ++ * add /dev/radio symlink to radio0, closes: #55649 ++ * update the netlink target to create fwmonitor and the tap* devices, ++ closes: #54772 ++ * add IRDA device support, closes: #47296 ++ ++ -- Bdale Garbee <bdale@gag.com> Thu, 3 Feb 2000 23:51:58 -0700 ++ ++makedev (2.3.1-37) unstable; urgency=low ++ ++ * add openprom entry for Sparc systems, closes: #54296 ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 7 Jan 2000 20:03:00 -0700 ++ ++makedev (2.3.1-36) unstable; urgency=low ++ ++ * fix cyclades target to make 32 instead of 33 devices, and update man page ++ to match what the code does, closes: #51892 ++ * add st0/st1/scd0/scd1 to generic-i386 and generic-alpha to improve the ++ consistency across platforms, closes: #52871 ++ * create an initial generic-arm target, anticipating the need as debian-arm ++ struggles to get ready to release with potato. ++ * update handling of network block devices (nb) so that specifying a single ++ device works as expected. calling for 'nb' will give nb0 and nb1. ++ Closes: #53781 ++ * support digital joysticks (djs) in joystick/js target, closes: #53314 ++ * update to current policy rev, add Build-Depends. ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 7 Jan 2000 02:14:24 -0700 ++ ++makedev (2.3.1-35) unstable; urgency=low ++ ++ * change group of video4linux devices to new group video appearing in ++ base-passwd 3.0.4, closes: 51429 ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 1999 20:00:12 -0700 ++ ++makedev (2.3.1-34) unstable; urgency=low ++ ++ * re-craft 'ida' target the same way we did dac960 to allow the boot-floopies ++ folks to create just one or two cards worth. Closes: #51341 ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 26 Nov 1999 17:54:56 -0700 ++ ++makedev (2.3.1-33) unstable; urgency=low ++ ++ * add usbmouse support to busmice target, closes: #50326 ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 16 Nov 1999 03:20:03 -0700 ++ ++makedev (2.3.1-32) unstable; urgency=low ++ ++ * add 'audio' to the targets for generic-i386, closes: #49935 ++ * craft an initial generic-alpha target to make the boot-floppies stuff ++ work right. For now, just clone the i386 target since I have no idea ++ what is really needed... closes: #49934 ++ * add support for creating ramN devices one at a time, closes: #49853 ++ * add target 'consoleonly' that creates the minimum number of devices to ++ support /dev/console, and recraft the 'console' target to use it and then ++ add all the vcs* devices, et al. Closes: #49852 ++ * re-craft 'dac960' target to be a loop around targets dac960.[0-7] so that ++ boot-floppies creators can create just one or two cards worth of devices ++ instead of having to do them all. Closes: #49864 ++ ++ -- Bdale Garbee <bdale@gag.com> Mon, 15 Nov 1999 22:38:43 -0700 ++ ++makedev (2.3.1-31) unstable; urgency=low ++ ++ * fixes for major numbers on some oddball CDROM types, needed for boot disks ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 10 Nov 1999 23:58:56 -0700 ++ ++makedev (2.3.1-30) unstable; urgency=low ++ ++ * fill in a few more audio devices, closes: #49107 ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 3 Nov 1999 20:28:54 -0700 ++ ++makedev (2.3.1-29) unstable; urgency=low ++ ++ * the /dev/vcs* handling is correct, closes: #42035 ++ * fix case construct for ht0, closes: #42519 ++ * fix major number determination for several devices, closes: #43560 ++ * add js2, js3 to joystick device creation, but leave owner/group/mode ++ the same as for mice until/unless some more compelling argument is ++ presented, closes: #43790 ++ * improve consistency of vcs device creation, making vcs0 and vcsa0, with ++ symlinks for vcs and vcsa, closes: #45698 ++ * add support for /dev/3dfx, closes: #48734 ++ * /dev/sr* is obsolete, use /dev/scd*, closes: #32723 ++ * RH 2.5 was merged as of 2.3.1-24, closes: #45153 ++ * FHS compliance ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 30 Oct 1999 16:53:32 -0600 ++ ++makedev (2.3.1-28) unstable; urgency=medium ++ ++ * /o\ oops... -27 was broken badly. Close 42355, 42359, 42361. ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 3 Aug 1999 02:38:06 -0600 ++ ++makedev (2.3.1-27) unstable; urgency=medium ++ ++ * fix loop's major number, closes 38559. ++ * fix group of scd* to be cdrom, not disk. Closes 41227, 41812. ++ * add vbi symlink, closes 39406 ++ ++ -- Bdale Garbee <bdale@gag.com> Mon, 2 Aug 1999 00:59:19 -0600 ++ ++makedev (2.3.1-26) unstable; urgency=medium ++ ++ * fix another syntax error introduced in -25... /o\ ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 29 May 1999 03:12:32 -0600 ++ ++makedev (2.3.1-25) unstable; urgency=medium ++ ++ * fix *ugly* typos introduced in -24, closes 38489, 38465. ++ * update MAKEDEV to install the mouse -> sunmouse link in generic-sparc, ++ in addition to making it in the postinst if needed. Closes 38432. ++ * have MAKEDEV exit with error 1 if we hit a "don't know how to make device" ++ situation. I'm a bit concerned about this since it *might* break a ++ package postinst somewhere. However, it is clearly the right thing to do ++ on a purely conceptual level. Closes 29974. ++ * add support for Free S/WAN (IPSEC) device, closes 38372. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 26 May 1999 14:00:29 -0600 ++ ++makedev (2.3.1-24) unstable; urgency=low ++ ++ * fold in patch from Espy to provide all the functionality of the RedHat ++ makedev 2.5. Leave our version number as 2.3.1-XX for now, since we're ++ not actually cleanly derived from the 2.5 RedHat bits. Closes 37795, 28616. ++ * make 'scd' act like 'scd-all', closes 37071 ++ * patch for postinst typo, closes 37612 ++ * move MAKEDEV to /sbin, create an init.d fragment to put a symlink in the ++ /dev directory at boot time. This should allow devfs to do its thing, ++ closing 37795, 33025. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 26 May 1999 14:00:29 -0600 ++ ++makedev (2.3.1-23) stable unstable; urgency=low ++ ++ * fix problems with st* and adb pointed out by Hartmut ++ ++ -- Bdale Garbee <bdale@gag.com> Thu, 15 Apr 1999 08:39:39 -0600 ++ ++makedev (2.3.1-22) unstable; urgency=low ++ ++ * add 'hamradio' as a target, which is a macro for the new scc[0-7] and ++ bc[0-3] targets, closes 34773. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 14 Apr 1999 11:55:46 -0600 ++ ++makedev (2.3.1-21) stable unstable; urgency=low ++ ++ * make /dev/mouse a symlink to /dev/sunmouse on sparc, closes 35616 ++ * have postinst create audio devices, closes 35646 ++ * also create [alm] suffix versions for st* devices, closes 33041 ++ * add support for hd[ijkl]... noticed while investigating bug 33798 ++ * use the same owner/group/perms for nvram that we use for kmem, closes 34111 ++ * add loop to the std device set, closes 34899 ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 14 Apr 1999 11:13:47 -0600 ++ ++makedev (2.3.1-20) stable unstable; urgency=medium ++ ++ * release-critical fixes from Hartmut for powerpc, closes 34004 ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 10 Mar 1999 07:51:08 -0700 ++ ++makedev (2.3.1-19) frozen unstable; urgency=medium ++ ++ * fix identification of 'sg' in update, closes the part of 33752 (grave) ++ that I can duplicate on i386 in -18 ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 23 Feb 1999 07:44:30 -0700 ++ ++makedev (2.3.1-18) frozen unstable; urgency=medium ++ ++ * as requested by Wichert, have the postinst force /dev/kmem owner, group, ++ and permissions since this is a security issue, closes 33703. ++ * another patch needed for m68k slink boot floppies from Michael Schmitz ++ ++ -- Bdale Garbee <bdale@gag.com> Mon, 22 Feb 1999 22:56:47 -0700 ++ ++makedev (2.3.1-17) frozen unstable; urgency=low ++ ++ * Wichert points out that /dev/kmem doesn't need to be group writeable. ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 20 Feb 1999 16:12:29 -0700 ++ ++makedev (2.3.1-16) frozen unstable; urgency=medium ++ ++ * apply patch for m68k that is release-critical for slink ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 19 Feb 1999 20:07:05 -0700 ++ ++makedev (2.3.1-15) frozen unstable; urgency=medium ++ ++ * fix major number for sunmouse as per Eric Delaunay, closes 33425 ++ * tighten default permission on mouse and joystick devices, closes 32378 ++ * change audio devices to root.audio 660, closes 32849 ++ * apply patch from Eric Delaunay to fix problem with scsi devices and 2.2 ++ kernels, closes 32999 ++ * target 'frozen' since the sunmouse fix at the very least should be in ++ slink... ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 17 Feb 1999 16:53:41 -0700 ++ ++makedev (2.3.1-14) frozen unstable; urgency=low ++ ++ * additions from Eric Delaunay needed for sparc frozen, closes 32458 ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 27 Jan 1999 13:54:31 -0700 ++ ++makedev (2.3.1-13) frozen unstable; urgency=low ++ ++ * make random/urandom available separately, not just in std, closes 32145 ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 19 Jan 1999 21:27:14 -0700 ++ ++makedev (2.3.1-12) frozen unstable; urgency=low ++ ++ * add random/urandom to the std target, closes 31562 and 29193 ++ * update manpage to indicate the manpage is out of date, I need to make a ++ chunk of time at some point to give it a thorough review/update. ++ * don't make /dev/cua*, fix group on /dev/ttyS*, closes 30867 ++ * change postinst to use syntax that isn't bash-specific, closes 18807 ++ and 30849 ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 9 Jan 1999 00:39:25 -0700 ++ ++makedev (2.3.1-11) frozen unstable; urgency=low ++ ++ * allow 16 sd's instead of 8, as the kernel does. closes 30555. ++ * create hdc and hdd in generic-i386, and create 20 partitions per hd ++ instead of 4, closes 30522. ++ * go back (forward?) to using 'u' instead of '[DHE]' in fd entries, ++ closes 30438. ++ * add 'fb' to both the generic-i386 and generic-powerpc clauses, closes ++ 29228 ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 12 Dec 1998 08:10:22 -0700 ++ ++makedev (2.3.1-10) frozen unstable; urgency=low ++ ++ * instead of having the postinst explicitly link /dev/console, have it ++ call MAKEDEV if console doesn't exist. Update MAKEDEV to know how to ++ link it for 2.0 kernels and prior, and create the explicit device for ++ 2.1 and later running kernels. Building this based on running kernel ++ revision doesn't feel clean, but I see no better way. ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 8 Nov 1998 18:49:30 -0700 ++ ++makedev (2.3.1-9) frozen unstable; urgency=low ++ ++ * fix postinst to cd to /dev so that devices don't end up in /, now that ++ we don't do the cd in MAKEDEV itself ++ * move 'generic' to 'generic-i386', and have 'generic' use dpkg to determine ++ which generic-<arch> to use... this paves the way for fixing support for ++ other architectures. ++ * Several changes per drow on IRC: ++ change MAXVT from 8 to 63 ++ change sd[ab] to create 15 instead of 8 subdevices ++ fix char->block on one scd instance ++ diffs to add support for powerpc machines ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 8 Nov 1998 18:49:30 -0700 ++ ++makedev (2.3.1-8) frozen unstable; urgency=low ++ ++ * add support for ram0 to the ram* list (0 was omitted), part of 28933. ++ * device 'rtc' was part of 'misc', give it a top-level entry too to reduce ++ possible confusion. Part of 28933. ++ * add an entry for 'initrd', closes 28933 (slink release-critical). ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 8 Nov 1998 10:18:37 -0700 ++ ++makedev (2.3.1-7) frozen unstable; urgency=low ++ ++ * now that MAKEDEV is a script, this can be an 'all' package instead of ++ an 'any'. Thanks to Hartmut Koptein for pointing this out. ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 6 Nov 1998 11:42:58 -0700 ++ ++makedev (2.3.1-6) frozen unstable; urgency=low ++ ++ * add ttyS entry so update works with recent 2.1 kernels ++ ++ -- Bdale Garbee <bdale@gag.com> Mon, 2 Nov 1998 21:47:34 -0700 ++ ++makedev (2.3.1-5) frozen unstable; urgency=low ++ ++ * fix typo affecting fb devices, closes 28742 ++ * fix syntax used for wildcarded devices, part of closing 28769 ++ * fix error in minor numbers for isdn-ippp, part of closing 28769 ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 1 Nov 1998 23:09:45 -0700 ++ ++makedev (2.3.1-4) frozen unstable; urgency=low ++ ++ * add support for additional scd and sg devices, closes 28029. ++ * change device names for busmice back to what we used in makedev-1.*, which ++ is also what the kernel documentation uses. Closes 28143. ++ * add support for various devices in contemporary kernels, closes 27720. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 28 Oct 1998 23:41:58 -0700 ++ ++makedev (2.3.1-3) unstable; urgency=low ++ ++ * use 'dialout' instead of 'serial' to select owner/group/perms for ISDN ++ devices, closes 27536 ++ * use 'dialout' as group for serial devices instead of 'uucp' to be ++ compatible with prior Debian makedev packages. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 7 Oct 1998 22:50:36 -0600 ++ ++makedev (2.3.1-2) unstable; urgency=low ++ ++ * fix scd-all and sg-all entry points. The latter is just an alias for 'sg', ++ but the former was genuinely missing. Switch sg devices to numeric suffix ++ to comply with kernel's devices.txt. Closes 27490. ++ * close 26586, since I'm pretty sure it's a weirdy not caused by the package. ++ * add ISDN devices, closes 26971. ++ * add cfs0 for CODA, closes 23815. ++ ++ -- Bdale Garbee <bdale@gag.com> Tue, 6 Oct 1998 00:33:59 -0600 ++ ++makedev (2.3.1-1) unstable; urgency=low ++ ++ * New upstream version. This is a *significant* change! ++ This is a move (back?) from the short-lived makedev that depended on a ++ non-free parser to the one that is just a shell script. We will now be ++ more like other Linux distributions, no longer depending on a non-free ++ hunk of code to build the makedev package, and some porting and other ++ issues will get better. ++ * With the major change in upstream code, several bugs are not relevant ++ any more. Therefore, close 12949, 18037, 18807, 20665, 22648, 22868, ++ 23771, 23898, 24477, 24572, 25660, 25840, 26058. ++ * add support for /dev/ptmx, built as part of pty*, closes 23612. ++ * add support for /dev/ed[ab], closes 23887. ++ ++ -- Bdale Garbee <bdale@gag.com> Sun, 6 Sep 1998 21:21:32 -0600 ++ ++makedev (1.6-32) frozen unstable; urgency=medium ++ ++ * serial devices now owned by root.dialout, closes 22297 (important) ++ * tape devices now owned by root.tape, closes 11910 ++ * be explicit about which 'ls' we're calling, closes 22225 ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 22 May 1998 23:52:58 -0600 ++ ++makedev (1.6-31) unstable; urgency=low ++ ++ * add powerpc support, closes 21949 ++ * lose the menu entry ++ ++ -- Bdale Garbee <bdale@gag.com> Sat, 2 May 1998 01:29:06 -0600 ++ ++makedev (1.6-30) unstable; urgency=low ++ ++ * change from debmake to debhelper ++ * fix errors and warnings reported by lintian ++ * deliver devices.sgml instead of trying to build the .txt and .html files, ++ closes bug 16953 ++ ++ -- Bdale Garbee <bdale@gag.com> Mon, 9 Feb 1998 22:31:43 -0700 ++ ++makedev (1.6-29) unstable; urgency=low ++ ++ * add arpd device, on request of Elie Rosenblum <erosenbl@nyx.net>. ++ ++ -- Bdale Garbee <bdale@gag.com> Wed, 14 Jan 1998 09:42:14 -0700 ++ ++makedev (1.6-28) unstable; urgency=low ++ ++ * new maintainer ++ ++ -- Bdale Garbee <bdale@gag.com> Fri, 5 Dec 1997 23:22:57 -0700 ++ ++makedev (1.6-27) unstable; urgency=low ++ ++ * changed /dev/console handling. ++ * updated devinfo to kernel 2.1.62 device list. ++ * changed all device with group "sys" to group "root". ++ ++ -- Andreas Jellinghaus <aj@debian.org> Sat, 8 Nov 1997 11:56:18 +0100 ++ ++makedev (1.6-26) unstable; urgency=low ++ ++ * fixed bug #13787 : amigamouse1 was not corrected by postinst. ++ * fixed ad devices. ++ * added nvram device, added ad* to std-hd-m68k, added ttyS4 and ttyS6 ++ to m68k boot-floppies and m68k generic ++ ++ -- Andreas Jellinghaus <aj@debian.org> Thu, 16 Oct 1997 20:09:14 +0200 ++ ++makedev (1.6-25) unstable; urgency=low ++ ++ * bug #9077 is obsolete (kernel bug, fixed in kernel). ++ * libc6 release : closes bugs #12791 and #13122. ++ * fixed bug #12158 : added sr* and sg* devices. ++ * fixed bug #12385 : wrong standard number. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Fri, 19 Sep 1997 16:12:32 +0200 ++ ++makedev (1.6-24) unstable; urgency=low ++ ++ * removed support for old floppy devices. ++ * only create generic floppy devices. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 10 Sep 1997 10:31:53 +0200 ++ ++makedev (1.6-23) unstable; urgency=low ++ ++ * renamed isdn batches : isdn-xx is 8 devices, isdn-xx-all are 64 ++ devices (isdn-io, isdn-tty, isdn-ippp, isdn-cu). ++ * increased numer to 5500 devices. (makedev is getting too large). ++ ++ -- Andreas Jellinghaus <aj@debian.org> Mon, 8 Sep 1997 21:40:11 +0200 ++ ++makedev (1.6-22) unstable; urgency=low ++ ++ * bugfix with cvstree (i forgot to commit befor tagging :-() ++ ++ -- Andreas Jellinghaus <aj@debian.org> Mon, 8 Sep 1997 21:30:08 +0200 ++ ++makedev (1.6-21) unstable; urgency=low ++ ++ * bugfix : out of memory. aarrgg : makedev has fixed size tables. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Mon, 8 Sep 1997 21:28:24 +0200 ++ ++makedev (1.6-20) unstable; urgency=low ++ ++ * corrected problem with my own cvs tree ++ ++ -- Andreas Jellinghaus <aj@debian.org> Sun, 7 Sep 1997 16:54:10 +0200 ++ ++makedev (1.6-19) unstable; urgency=low ++ ++ * changed /dev/full to mode 0622 (0666 was a security hole, as ++ discussed on linux-kernel). ++ ++ -- Andreas Jellinghaus <aj@debian.org> Sun, 7 Sep 1997 16:22:27 +0200 ++ ++makedev (1.6-18) unstable; urgency=low ++ ++ * added isdn-*-small devices (only 8 devices, not 64). ++ ++ -- Andreas Jellinghaus <aj@debian.org> Fri, 22 Aug 1997 12:57:20 +0200 ++ ++makedev (1.6-17) unstable; urgency=low ++ ++ * close bug 6541 (missing audio device) : not reproduceable ++ * generate random and urandom, if missing (bug #12134) ++ * enabled makedev to create more sg* and sr* devices (bug #12158) ++ * changed doubletalkt to dtlk as requested ++ * sd[a-h]16 removed (bug, sda16 = sdb, scsi only supports 15 ++ partitions) ++ ++ -- Andreas Jellinghaus <aj@debian.org> Sun, 17 Aug 1997 19:19:33 +0200 ++ ++makedev (1.6-16) stable unstable; urgency=low ++ ++ * security bug fixed : all mouse devices are now mode 600. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 30 Jul 1997 10:31:04 +0200 ++ ++makedev (1.6-15) unstable; urgency=low ++ ++ * ibcs2 removed from generic set. revised ibcs2-unoff. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Tue, 29 Jul 1997 13:13:43 +0200 ++ ++makedev (1.6-14) unstable; urgency=low ++ ++ * bug in postinst : type "MAKDEV" and "/dev/tty0" instead of "tty0" (#11441) ++ * stable version (libc5 compiled) for isdnutils ++ ++ -- Andreas Jellinghaus <aj@debian.org> Fri, 25 Jul 1997 10:12:14 +0200 ++ ++makedev (1.6-13) unstable; urgency=low ++ ++ * fixed menu entry (thanks to Abdallah Chatila <acha@poboxes.com>) ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 9 Jul 1997 21:33:55 +0200 ++ ++makedev (1.6-12) unstable; urgency=low ++ ++ * bug fix (changed doubletalk to class audio). ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 9 Jul 1997 09:45:38 +0200 ++ ++makedev (1.6-11) unstable; urgency=low ++ ++ * Fixed isdn devices (ippp were missing). ++ * No longer create isdn device as default (that is done by isdnutils). ++ * Added doubletalk device. Added more ibcs2 stuff. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Tue, 8 Jul 1997 19:04:45 +0200 ++ ++makedev (1.6-10) unstable stable; urgency=low ++ ++ * fixed console device, added documentation. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 25 Jun 1997 13:20:46 +0200 ++ ++makedev (1.6-9) unstable stable; urgency=low ++ ++ * Added comment about cua devices. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Tue, 24 Jun 1997 09:21:20 +0200 ++ ++makedev (1.6-8) unstable stable; urgency=low ++ ++ * changed /dev/console to be a symlink to /dev/tty0. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Sun, 22 Jun 1997 21:42:35 +0200 ++ ++makedev (1.6-7) unstable stable; urgency=low ++ ++ * fixed bug with possible /dev/console symlink. ++ * fixed bug with not always creating /dev/tty0. (xfree 3.3 need this) ++ ++ -- Andreas Jellinghaus <aj@debian.org> Thu, 19 Jun 1997 22:38:46 +0200 ++ ++makedev (1.6-6) unstable; urgency=low ++ ++ * fixed documentation (thanks to David Welton <davidw@efn.org>) ++ * patch for m68k from frank neumann included ++ ++ -- Andreas Jellinghaus <aj@debian.org> Mon, 9 Jun 1997 15:45:00 +0200 ++ ++makedev (1.6-5) unstable; urgency=low ++ ++ * libc6 release ++ * added postinst script to change tty/pty devices to new major ++ numbers (the next time you boot). ++ * changed all serial devices from root.dialout to uucp.dialout ++ * added generic-ARCH batches ++ * changed (u)random permissions from 444 to 644 ++ * corrected mcd/mcdx handling. ++ * small bugfix in manpages. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Thu, 24 Apr 1997 19:12:58 +0200 ++ ++makedev (1.6-4) unstable frozen; urgency=low ++ ++ * fixed manpage, added generic-m68k, added mfd0, changed framebuffer ++ create both : fb[01] and fb[01]current, changed framebuffer ++ class to mode 664. disabled adb (apple desktob bus). ++ this fixes bug #9053 ++ * fixed mitsumi cdrom detection. ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 23 Apr 1997 16:23:50 +0200 ++ ++makedev (1.6-3) unstable frozen; urgency=low ++ ++ * bug fixed : st?l devices (nor st?1). ++ * only create fd0 and fd1 with generic ++ * seperated old device names to "-old" groups ++ * not generating cm205cd by default ++ * "boot-floppy" added with less devices ++ * documentation in sgml and txt format ++ ++ -- Andreas Jellinghaus <aj@debian.org> Wed, 16 Apr 1997 12:58:56 +0200 ++ ++makedev (1.6-2) unstable frozen; urgency=high ++ ++ * new maintainer Andreas Jellinghaus <aj@debian.org> ++ * rewrote devinfo (according to linux allocated devices, 2.0.30,2.1.31 ++ * this fixes bug #8396 (isdn devices) ++ * this fixes bug #8399 (don't generate cu* devices) ++ * this fixes bug #7144 (device for goldstar cdrom - gscd) ++ * this fixes bug #8173 (new names for floppy devices fd*) ++ * this fixes bug #8068 (hd[efgh] devises added : now ide[0123]) ++ (this includes: renamed all floppy device (bug #8173), ++ * this fixes bug #3493 (isdn devices) ++ * this fixes bug #5542 (ttyS* group dialout, cu* not generated) ++ * this fixes bug #6926 (loop back devices corrected) ++ * this fixes bug #6983 (loop back devices creatable) ++ * this fixes bug #7038 (mcd device creatable (only one)) ++ * this fixes bug #7754 (sr* devices are created for compatibility) ++ * this fixes parts of bug #7783 (only new tty/pty are created) ++ * bug #7755 obsolete (old cat file ? current man page is ok) ++ * bug #8009 obsolete (disks 1997-04-04 are ok) ++ * remove from generic : cua[0-3] lmscd ram sbpcd[9-15] vcs0 ++ added to generic: X0R aztcd beep bpcd cm205cd cm206cd exttrp gscd ++ hd[efgh]* hitcd hwtrap initrd ippp* jbm loop* mcd md* modreq nsfd ++ nst*[1am] optcd ram[0-7] ramdisk relay16 relay8 rtc sd[abcdefgh][9-16] ++ sequence2 sg[0-7] sjcd socksys spx sr[0-7] st*[1am] tpqic* tty[13-63] ++ ttyI[0-63] urandom vcs vcs[13-63] vcsa vcsa[13-63] watchdog ++ (ca. + 600 devices, size + 11 k in a ext2fs) ++ ++ -- Andreas Jellinghaus <aj@debian.org> Sun, 13 Apr 1997 21:06:14 +0200 ++ ++makedev (1.6-1) unstable; urgency=low ++ ++ * New upstream version. ++ ++ -- Bruce Perens <bruce@pixar.com> Wed, 19 Mar 1997 20:40:17 -0800 ++ ++makedev (1.5-4) unstable; urgency=low ++ ++ * Add devices. Increase the maximum size of a batch from 32 to 1024. ++ ++ -- Bruce Perens <bruce@pixar.com> Tue, 17 Dec 1996 20:34:06 -0800 ++ ++makedev (1.5-3) unstable; urgency=low ++ ++ * Make hd[a-d][8-20] and sd[a-h][8-20]. Remove bad empty "omit" from ++ makedev.cfg ++ ++ -- Bruce Perens <bruce@pixar.com> Sun, 8 Dec 1996 09:42:18 -0800 ++ ++makedev (1.5-2) unstable; urgency=low ++ ++ * Change class of ttySn devices to dialout. ++ * Add ISDN. ++ ++ -- Bruce Perens <bruce@pixar.com> Fri, 6 Dec 1996 21:17:12 -0800 ++ ++makedev (1.5-1) unstable; urgency=low ++ ++ * Initial Release. ++ ++ -- Bruce Perens <bruce@pixar.com> Wed, 30 Oct 1996 20:36:44 -0800 ++ ++Local variables: ++mode: debian-changelog ++End: +--- makedev-2.3.1.orig/debian/conffiles ++++ makedev-2.3.1/debian/conffiles +@@ -0,0 +1 @@ ++/etc/init.d/makedev +--- makedev-2.3.1.orig/debian/control ++++ makedev-2.3.1/debian/control +@@ -0,0 +1,13 @@ ++Source: makedev ++Section: base ++Priority: required ++Maintainer: Bdale Garbee <bdale@gag.com> ++Build-Depends: debhelper ++Standards-Version: 3.1.1.1 ++ ++Package: makedev ++Architecture: all ++Depends: base-passwd (>= 3.0.4) ++Description: Creates special device files in /dev. ++ The MAKEDEV executable is used to populate the /dev directory with device ++ files. +--- makedev-2.3.1.orig/debian/copyright ++++ makedev-2.3.1/debian/copyright +@@ -0,0 +1,45 @@ ++This package is maintained for Debian by Bdale Garbee, <bdale@gag.com>. ++ ++It was downloaded from ftp.redhat.com, as a source .rpm from the 5.1 release ++tree. ++ ++Copyright: ++ ++No explicit copyright is asserted. Nick Holloway is the earliest author ++recorded in the sourcecode. I queried him for an explicit statement ++regarding the license status of this work, and this is his reply: ++ ++ Date: Tue, 21 Jul 1998 19:57:10 +0100 ++ From: Nick Holloway <Nick.Holloway@alfie.demon.co.uk> ++ Message-Id: <199807211857.TAA19068@alfie.demon.co.uk> ++ To: Bdale Garbee <bdale@gag.com> ++ Subject: Re: makedev license? ++ ++ > I maintain the makedev package for Debian GNU/Linux. I am about to move ++ > from the ill-fated makedev-1.6 to the makedev-2.3.1 derived from your work ++ > by the folks at Redhat. I don't see any evidence of a copyright assertion ++ > or explicit license statement in the source. Your name appears to be the ++ > earliest attached to the current sourcecode. Am I correct in assuming the ++ > GPL? We try to be meticulous about having our base system be compliant ++ > with our Debian Free Software Guidelines, so I'd like an explicit statement. ++ ++ It was never explictly released as GPL, as that would have required ++ including the file COPYING which would have been much larger than the ++ actual MAKEDEV script (I was also too lazy to find out what incantations ++ needed to be made). However, it is intended to be used as anyone sees ++ fit, and the statement under "Copying Policy" is "Freely Redistributable" ++ (see MAKEDEV.lsm from any of the releases I made). ++ ++ The more recent modifications were done by Michael K. Johnson at ++ Redhat. I think the understanding was that he would be taking over the ++ maintenance of MAKEDEV (our discussion took place last September). ++ ++ The only previous history was (according to an old posting to ++ comp.os.linux) that I started with Jim Winstead's script. ++ ++ So, as far as I am concerned, it is consistentwith the Debian FSG. ++ ++ -- ++ `O O' | Home: Nick.Holloway@alfie.demon.co.uk http://www.alfie.demon.co.uk/ ++ // ^ \\ | Work: Nick.Holloway@parallax.co.uk ++ +--- makedev-2.3.1.orig/debian/dirs ++++ makedev-2.3.1/debian/dirs +@@ -0,0 +1,2 @@ ++sbin ++usr/share/man/man8 +--- makedev-2.3.1.orig/debian/init.d ++++ makedev-2.3.1/debian/init.d +@@ -0,0 +1,21 @@ ++#! /bin/sh ++ ++PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin ++ ++set -e ++ ++case "$1" in ++ start) ++ ln -fs /sbin/MAKEDEV /dev/MAKEDEV ++ ;; ++ stop|reload|restart|force-reload) ++ ;; ++ *) ++ N=/etc/init.d/makedev ++ # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2 ++ echo "Usage: $N {start|stop|restart|force-reload}" >&2 ++ exit 1 ++ ;; ++esac ++ ++exit 0 +--- makedev-2.3.1.orig/debian/postinst ++++ makedev-2.3.1/debian/postinst +@@ -0,0 +1,62 @@ ++#!/bin/sh ++ ++set +e ++ ++#DEBHELPER# ++ ++cd /dev ++ ++/sbin/MAKEDEV std ++ ++test -e /dev/console || /sbin/MAKEDEV console ++test -e /dev/tty0 || /sbin/MAKEDEV tty0 ++test -e /dev/random || /sbin/MAKEDEV random ++test -e /dev/urandom || /sbin/MAKEDEV urandom ++test -e /dev/full && chmod 0622 /dev/full ++test -e /dev/audio || /sbin/MAKEDEV audio ++ ++[ ! -f /dev/mouse -a -f /dev/sunmouse ] && ln -s sunmouse mouse ++ ++for A in sda16 sdb16 sdc16 sdd16 sde16 sdf16 sdg16 sdh16 \ ++ ada16 adb16 adc16 add16 ade16 adf16 adg16 adh16 ++do ++ test -e /dev/$A && rm /dev/$A ++done ++ ++for A in logibm psaux inportbm atibm jbm smouse logimouse psmouse \ ++msmouse atimouse jmouse amigamouse atarimouse sunmouse amigamouse1 ++do ++ test -e /dev/$A && chmod 600 /dev/$A ++done ++ ++# fix security hole caused by group-write permissions on kmem ++test -e /dev/kmem && chown root.kmem /dev/kmem && chmod 0640 /dev/kmem ++ ++LIST="" ++ ++for TYPE in tty pty ; do ++ for LETTER in p q r s t u v w x y z a b c d e ; do ++ if [ -e /dev/$TYPE$LETTER"0" ]; then ++ MAJOR="`/bin/ls -l /dev/$TYPE$LETTER"0"|cut -c33-36`" ++ if [ "$MAJOR" = 4 ] ; then ++ LIST="$LIST $TYPE$LETTER" ++ fi ++ fi ++ done ++done ++ ++if [ -n "$LIST" ]; then ++ cat > /etc/rc.boot/makedev << EOF ++#!/bin/sh ++ ++echo "Creating new console devices" ++/sbin/MAKEDEV $LIST ++ ++rm /etc/rc.boot/makedev ; exit 0 ++EOF ++ ++chmod 755 /etc/rc.boot/makedev ++ ++fi ++ ++exit 0 +--- makedev-2.3.1.orig/debian/preinst ++++ makedev-2.3.1/debian/preinst +@@ -0,0 +1,5 @@ ++#!/bin/sh ++ ++rm -f /usr/man/man8/MAKEDEV.8 /usr/man/man8/MAKEDEV-C.8 \ ++ /usr/man/man8/MAKEDEV-C.8.gz ++exit 0 +--- makedev-2.3.1.orig/debian/rules ++++ makedev-2.3.1/debian/rules +@@ -0,0 +1,56 @@ ++#!/usr/bin/make -f ++# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess. ++ ++# Uncomment this to turn on verbose mode. ++#export DH_VERBOSE=1 ++ ++build: build-stamp ++build-stamp: ++ dh_testdir ++ touch build-stamp ++ ++clean: ++ dh_testdir ++ dh_testroot ++ rm -f build-stamp ++ -$(MAKE) clean ++ -rm -f debian/devices.txt debian/devices*html ++ dh_clean ++ ++# Build architecture-independent files here. ++binary-indep: build ++ ++# Build architecture-dependent files here. ++binary-arch: build ++# dh_testversion ++ dh_testdir ++ dh_testroot ++ dh_clean -k ++ dh_installdirs ++ ++ ROOT=debian/tmp $(MAKE) install ++ ++ dh_installdocs ++ dh_installexamples ++ dh_installmenu ++ dh_installinit ++ dh_installcron ++ dh_installmanpages ++ dh_undocumented ++ dh_installchangelogs ++ dh_strip ++ dh_compress ++ dh_fixperms ++ dh_suidregister ++ dh_installdeb ++ dh_shlibdeps ++ dh_gencontrol ++# dh_makeshlibs ++ dh_md5sums ++ dh_builddeb ++ ++source diff: ++ @echo >&2 'source and diff are obsolete - use dpkg-source -b'; false ++ ++binary: binary-indep binary-arch ++.PHONY: build clean binary-indep binary-arch binary |