3 files changed, 155 insertions, 0 deletions
diff --git a/patches/source/sudo/doinst.sh b/patches/source/sudo/doinst.sh
new file mode 100644
index 00000000..01e3d173
--- /dev/null
+++ b/patches/source/sudo/doinst.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/sudoers.new
+rm -f etc/sudoers.new
diff --git a/patches/source/sudo/slack-desc b/patches/source/sudo/slack-desc
new file mode 100644
index 00000000..66f1aa8c
--- /dev/null
+++ b/patches/source/sudo/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+sudo: sudo (give limited root privileges to certain users)
+sudo:
+sudo: 'sudo' is a command that allows users to execute some commands as 
+sudo: root.  The /etc/sudoers file (edited with 'visudo') specifies which
+sudo: users have access to sudo and which commands they can run.  'sudo' 
+sudo: logs all its activities to /var/log/ so the system administrator
+sudo: can keep an eye on things.
+sudo:
+sudo:
+sudo:
+sudo:
diff --git a/patches/source/sudo/sudo.SlackBuild b/patches/source/sudo/sudo.SlackBuild
new file mode 100755
index 00000000..69fddce8
--- /dev/null
+++ b/patches/source/sudo/sudo.SlackBuild
@@ -0,0 +1,122 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2011, 2012, 2015  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=sudo
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack13.37}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sudo
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/var/db
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+cd $TMP
+rm -rf sudo-$VERSION
+tar xvf $CWD/sudo-$VERSION.tar.?z* || exit 1
+cd sudo-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sbindir=/usr/sbin \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/sudo-$VERSION \
+  --with-env-editor \
+  --disable-pam-session \
+  --with-pam=no \
+  --with-rundir=/var/db/sudo \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+( cd $PKG/usr/bin
+  chmod 4711 sudo
+  ln -sf sudo sudoedit
+)
+chmod 755 $PKG/usr/sbin/visudo
+
+rm -f $PKG/usr/man/man8/sudoedit.8
+gzip -9 $PKG/usr/man/man?/*.?
+( cd $PKG/usr/man/man8 ; ln -sf sudo.8.gz sudoedit.8.gz )
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mv $PKG/etc/sudoers $PKG/etc/sudoers.new
+
+rm -r $PKG/usr/doc/sudo-$VERSION
+mkdir -p $PKG/usr/doc/sudo-$VERSION
+cp -a \
+  INSTALL NEWS README* \
+  doc/{CONTRIBUTORS,HISTORY,LICENSE,TROUBLESHOOTING,UPGRADE} \
+  $PKG/usr/doc/sudo-$VERSION
+chmod 644 $PKG/usr/doc/sudo-$VERSION/*
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/sudo-$VERSION-$ARCH-$BUILD.txz
+