7 files changed, 367 insertions, 0 deletions
diff --git a/patches/source/ntp/doinst.sh b/patches/source/ntp/doinst.sh
new file mode 100644
index 00000000..bc542990
--- /dev/null
+++ b/patches/source/ntp/doinst.sh
@@ -0,0 +1,28 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  config ${NEW}
+}
+
+config etc/ntp.conf.new
+config etc/ntp/ntp.keys.new
+if [ -r etc/rc.d/rc.ntpd -a -r etc/rc.d/rc.ntpd.new ]; then
+  chmod --reference=etc/rc.d/rc.ntpd etc/rc.d/rc.ntpd.new
+fi
+mv etc/rc.d/rc.ntpd.new etc/rc.d/rc.ntpd
diff --git a/patches/source/ntp/ntp.SlackBuild b/patches/source/ntp/ntp.SlackBuild
new file mode 100755
index 00000000..fef8d125
--- /dev/null
+++ b/patches/source/ntp/ntp.SlackBuild
@@ -0,0 +1,158 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2011, 2012, 2014  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=ntp
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack13.1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-ntp
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf ntp-${VERSION}*
+tar xvf $CWD/ntp-${VERSION}*.tar.?z* || exit 1
+cd ntp-${VERSION}* || exit 1
+
+zcat $CWD/ntp.nano.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 2777 -o -perm 2755 -o -perm 2775 \) \
+  -exec chmod u+rwx,g-sw,g+rx,o-w,o+rx {} \; -o \
+  \( -perm 777 -o -perm 775 -o -perm 774 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod u+rwx,g-sw,g+rx,o-w,o+rx {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --localstatedir=/var \
+  --sysconfdir=/etc \
+  --bindir=/usr/sbin \
+  --sbindir=/usr/sbin \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/ntp-$VERSION \
+  --htmldir=/usr/doc/ntp-$VERSION \
+  --enable-ipv6 \
+  --with-crypto \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make -i install DESTDIR=$PKG || exit 1
+
+# Since the Makefile's install pays no heed to the --bindir settings,
+# we'll move things to where they've always been ourselves:
+mv $PKG/usr/bin/* $PKG/usr/sbin
+rmdir $PKG/usr/bin
+
+# This might only be an empty directory:
+rmdir $PKG/usr/lib/pkgconfig
+
+# This should be empty.  Try to remove it, and error out if it's not actually empty:
+rmdir $PKG/usr/libexec || exit 1
+
+mkdir -p $PKG/etc/ntp
+cat $CWD/ntp.conf > $PKG/etc/ntp.conf.new
+cat $CWD/ntp.keys > $PKG/etc/ntp/ntp.keys.new
+chmod 600 $PKG/etc/ntp/ntp.keys.new
+touch $PKG/etc/ntp/step-tickers
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.ntpd > $PKG/etc/rc.d/rc.ntpd.new
+
+mv $PKG/usr/doc/ntp-$VERSION/*.html $PKG/usr/doc/ntp-$VERSION/html || exit 1
+cp -a \
+  COPYRIGHT NEWS README* TODO WHERE-TO-START \
+  *.y2kfixes clockstuff conf scripts \
+  $PKG/usr/doc/ntp-$VERSION
+mkdir $PKG/usr/doc/ntp-$VERSION/util
+cp -a util/README $PKG/usr/doc/ntp-$VERSION/util
+mkdir $PKG/usr/doc/ntp-$VERSION/ntpdate
+cp -a ntpdate/README $PKG/usr/doc/ntp-$VERSION/ntpdate
+( cd $PKG/usr/doc/ntp-$VERSION
+  find . -name ".deps*" -exec rm -rf "{}" \; 2> /dev/null
+)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/ntp-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/patches/source/ntp/ntp.conf b/patches/source/ntp/ntp.conf
new file mode 100644
index 00000000..1844fb91
--- /dev/null
+++ b/patches/source/ntp/ntp.conf
@@ -0,0 +1,72 @@
+# Sample /etc/ntp.conf:  Configuration file for ntpd.
+#
+# Undisciplined Local Clock. This is a fake driver intended for backup
+# and when no outside source of synchronized time is available. The
+# default stratum is usually 3, but in this case we elect to use stratum
+# 0. Since the server line does not have the prefer keyword, this driver
+# is never used for synchronization, unless no other other
+# synchronization source is available. In case the local host is
+# controlled by some external source, such as an external oscillator or
+# another protocol, the prefer keyword would cause the local host to
+# disregard all other synchronization sources, unless the kernel
+# modifications are in use and declare an unsynchronized condition.
+#
+server	127.127.1.0	# local clock
+fudge	127.127.1.0 stratum 10	
+
+#
+# NTP server (list one or more) to synchronize with:
+#server 0.pool.ntp.org iburst
+#server 1.pool.ntp.org iburst
+#server 2.pool.ntp.org iburst
+#server 3.pool.ntp.org iburst
+
+#
+# Drift file.  Put this in a directory which the daemon can write to.
+# No symbolic links allowed, either, since the daemon updates the file
+# by creating a temporary in the same directory and then rename()'ing
+# it to the file.
+#
+driftfile /etc/ntp/drift
+
+#
+# Uncomment to use a multicast NTP server on the local subnet:
+#multicastclient 224.0.1.1		# listen on default 224.0.1.1
+# Set an optional compensation for broadcast packet delay:
+#broadcastdelay	0.008
+
+#
+# Keys file.  If you want to diddle your server at run time, make a
+# keys file (mode 600 for sure) and define the key number to be
+# used for making requests.
+# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
+# systems might be able to reset your clock at will.
+#
+#keys		/etc/ntp/keys
+#trustedkey	65535
+#requestkey	65535
+#controlkey	65535
+
+#
+# Don't serve time or stats to anyone else by default (more secure)
+restrict default limited kod nomodify notrap nopeer noquery
+restrict -6 default limited kod nomodify notrap nopeer noquery
+
+#
+# Use these lines instead if you do want to serve time and stats to
+# other machines on the network:
+#restrict default limited kod nomodify notrap nopeer
+#restrict -6 default limited kod nomodify notrap nopeer
+
+#
+# Disable the ntpdc -c monlist command, which is insecure and can be used
+# to cause a denial of service attack (CVE-2013-5211). Future versions of
+# NTP will remove this command.
+# (this feature was disabled by default with ntpd 4.2.7p230)
+disable monitor
+
+#
+# Trust ourselves.  :-)
+restrict 127.0.0.1
+restrict ::1
+
diff --git a/patches/source/ntp/ntp.keys b/patches/source/ntp/ntp.keys
new file mode 100644
index 00000000..1c3fbd2c
--- /dev/null
+++ b/patches/source/ntp/ntp.keys
@@ -0,0 +1,2 @@
+65535	M	akey
+1	M	pass
diff --git a/patches/source/ntp/ntp.nano.diff b/patches/source/ntp/ntp.nano.diff
new file mode 100644
index 00000000..0ff361ce
--- /dev/null
+++ b/patches/source/ntp/ntp.nano.diff
@@ -0,0 +1,17 @@
+--- ./include/ntp_syscall.h.orig	2009-12-09 01:36:37.000000000 -0600
++++ ./include/ntp_syscall.h	2010-04-21 23:38:30.000000000 -0500
+@@ -14,6 +14,14 @@
+ # include <sys/timex.h>
+ #endif
+ 
++#if defined(ADJ_NANO) && !defined(MOD_NANO)
++#define MOD_NANO ADJ_NANO
++#endif
++
++#if defined(ADJ_TAI) && !defined(MOD_TAI)
++#define MOD_TAI ADJ_TAI
++#endif
++
+ #ifndef NTP_SYSCALLS_LIBC
+ #ifdef NTP_SYSCALLS_STD
+ # define ntp_adjtime(t)		syscall(SYS_ntp_adjtime, (t))
diff --git a/patches/source/ntp/rc.ntpd b/patches/source/ntp/rc.ntpd
new file mode 100644
index 00000000..c1d1411c
--- /dev/null
+++ b/patches/source/ntp/rc.ntpd
@@ -0,0 +1,71 @@
+#!/bin/sh
+# Start/stop/restart ntpd.
+
+# Start ntpd:
+ntpd_start() {
+  CMDLINE="/usr/sbin/ntpd -g"
+  echo -n "Starting NTP daemon:  $CMDLINE"
+  $CMDLINE -p /var/run/ntpd.pid
+  echo
+  # The kernel is now mocking around with the the hardware clock if
+  # ntpd is running, so if the hardware clock (wall clock) is set to
+  # 'localtime' execute hwclock --localtime --systohc to disable the
+  # 11 minute mode kernel function:
+  if [ -x /sbin/hwclock ]; then
+    # Check for a broken motherboard RTC clock (where ioports for rtc are
+    # unknown) to prevent hwclock causing a hang:
+    if ! grep -q -w rtc /proc/ioports ; then
+      CLOCK_OPT="--directisa"
+    fi
+    if ! grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then 
+      echo "Saving system time to the hardware clock (localtime)."
+      /sbin/hwclock  $CLOCK_OPT --localtime --systohc
+    fi
+  fi
+}
+
+# Stop ntpd:
+ntpd_stop() {
+  echo -n "Stopping NTP daemon..."
+  if [ -r /var/run/ntpd.pid ]; then
+    kill -HUP $(cat /var/run/ntpd.pid)
+    rm -f /var/run/ntpd.pid
+  else
+    killall -HUP -q ntpd
+  fi
+  echo
+}
+
+# Restart ntpd:
+ntpd_restart() {
+  ntpd_stop
+  sleep 1
+  ntpd_start
+}
+
+# Check if ntpd is running
+ntpd_status() {
+  if [ -e /var/run/ntpd.pid ]; then
+    echo "ntpd is running."
+  else 
+    echo "ntpd is stopped."
+    exit 1
+  fi
+}
+
+case "$1" in
+'start')
+  ntpd_start
+  ;;
+'stop')
+  ntpd_stop
+  ;;
+'restart')
+  ntpd_restart
+  ;;
+'status')
+  ntpd_status
+  ;;
+*)
+  echo "usage $0 start|stop|restart|status"
+esac
diff --git a/patches/source/ntp/slack-desc b/patches/source/ntp/slack-desc
new file mode 100644
index 00000000..6319e888
--- /dev/null
+++ b/patches/source/ntp/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+ntp: ntp (Network Time Protocol daemon)
+ntp:
+ntp: The Network Time Protocol (NTP) is used to synchronize the time of a
+ntp: computer client or server to another server or reference time source,
+ntp: such as a radio or satellite receiver or modem. It provides client
+ntp: accuracies typically within a millisecond on LANs and up to a few tens
+ntp: of milliseconds on WANs relative to a primary server synchronized to
+ntp: Coordinated Universal Time (UTC) via a Global Positioning Service
+ntp: (GPS) receiver, for example. 
+ntp:
+ntp: