1 files changed, 203 insertions, 0 deletions
diff --git a/patches/source/gtk+2/gtk+2.SlackBuild b/patches/source/gtk+2/gtk+2.SlackBuild
new file mode 100755
index 00000000..54812fff
--- /dev/null
+++ b/patches/source/gtk+2/gtk+2.SlackBuild
@@ -0,0 +1,203 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2011, 2012, 2013, 2016  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-$(echo gtk+-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack14.2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-gtk2
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+cd $TMP
+rm -rf gtk+-$VERSION
+tar xvf $CWD/gtk+-$VERSION.tar.?z* || exit 1
+cd gtk+-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Fix build errors
+zcat $CWD/fix_build_issues_on_tutorial_and_faq.diff.gz | patch -p1 --verbose || exit 1
+
+# Do not flood the console or .xsession-errors with "trouble ahead"
+# warnings (most noticable when using Firefox and Flash):
+zcat $CWD/gtk.xid.nowarningflood.diff.gz | patch -p1 --verbose || exit 1
+
+# Patch to restore commonly used icon names, otherwise everything breaks.
+# I fail to see the point of this "cleanup"
+zcat $CWD/gtk+-2.24.x.icon-compat.am.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/gtk+-2.24.x.icon-compat.diff.gz | patch -p1 --verbose || exit 1
+
+# Prevents build failures in the docs.  Found online.
+# Only needed if autoreconf is used...  ?
+zcat $CWD/gtk.gtk-faq.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/gtk.gtk-tut.diff.gz | patch -p1 --verbose || exit 1
+
+# Regenerate ./configure:
+libtoolize --force
+autoreconf -vif
+
+# Autoconf changes linux to linux-gnu.
+# Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu:
+sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --with-xinput=yes \
+  --enable-xkb \
+  --enable-introspection \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+
+# Check the host value that is passed to the compile to the one in this script:
+host="$ARCH-slackware-linux"
+compile_host=$(grep 'host_triplet =' gtk/Makefile | sed -e "s/.* = //")
+if [ "x$compile_host" != "x$host" ]; then
+  echo "Host mismatch: compile='$compile_host', SlackBuild='$host'" && exit 1
+fi
+
+make install \
+  RUN_QUERY_IMMODULES_TEST=false RUN_QUERY_LOADER_TEST=false \
+  DESTDIR=$PKG \
+  || exit 1
+
+# Don't clobber im-multipress.conf
+mv $PKG/etc/gtk-2.0/im-multipress.conf $PKG/etc/gtk-2.0/im-multipress.conf.new || exit 1
+
+# Install a "starter" gtkrc
+# /etc/gtk-2.0/gtkrc overrides this  --rworkman
+echo 'gtk-theme-name="GTK+"' > $PKG/usr/share/gtk-2.0/gtkrc
+echo 'gtk-icon-theme-name="Adwaita"' >> $PKG/usr/share/gtk-2.0/gtkrc
+echo 'gtk-fallback-icon-theme = "Tango"' >> $PKG/usr/share/gtk-2.0/gtkrc
+
+# We need to have separate 32-bit and 64-bit binaries
+# for places where we have two copies of the GTK+ package installed.
+# (we might have x86_64 and i486 packages on the same system, for example.)
+case "$host" in
+  s390x*|x86_64*)
+   mv $PKG/usr/bin/gtk-query-immodules-2.0{,-64}
+   ( cd $PKG/usr/bin
+     ln -sf gtk-query-immodules-2.0-64 gtk-query-immodules-2.0
+   )
+   ;;
+  *)
+   mv $PKG/usr/bin/gtk-query-immodules-2.0{,-32}
+   ( cd $PKG/usr/bin
+     ln -sf gtk-query-immodules-2.0-32 gtk-query-immodules-2.0
+   )
+   ;;
+esac
+
+# Install wrappers for the binaries:
+cp -a $CWD/update-gtk-immodules* $PKG/usr/bin
+chown root:root $PKG/usr/bin/update-*
+chmod 0755 $PKG/usr/bin/update-*
+
+# Add profile scripts to set up GTK+ environment:
+mkdir -p $PKG/etc/profile.d
+cp -a $CWD/profile.d/* $PKG/etc/profile.d
+chmod 0755 $PKG/etc/profile.d/*
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/gtk+-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+  $PKG/usr/doc/gtk+-$VERSION
+( cd $PKG/usr/doc/gtk+-$VERSION
+  ln -s ../../share/gtk-doc/html/gail-libgail-util .
+  ln -s ../../share/gtk-doc/html/gdk .
+  ln -s ../../share/gtk-doc/html/gtk .
+)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/gtk+2-$VERSION-$ARCH-$BUILD.txz
+