Fri Nov 27 06:21:11 UTC 202020201127062111

Moved a few dependencies from vtown into the main tree, updated much of the
GNOME stack, and Xfce 4.14 appears in vtown! Thanks much to Robby Workman.
Hope everyone had a good day. Enjoy! :-)
a/upower-0.99.11-x86_64-1.txz:  Upgraded.
d/sassc-3.6.1-x86_64-1.txz:  Added.
d/vala-0.50.2-x86_64-1.txz:  Upgraded.
l/at-spi2-atk-2.38.0-x86_64-1.txz:  Upgraded.
l/at-spi2-core-2.38.0-x86_64-1.txz:  Upgraded.
l/brotli-1.0.9-x86_64-3.txz:  Rebuilt.
  Get rid of unrecognized -R in the pkg-config files.
l/dconf-0.38.0-x86_64-1.txz:  Upgraded.
l/dconf-editor-3.38.2-x86_64-1.txz:  Upgraded.
l/gcr-3.38.0-x86_64-1.txz:  Upgraded.
l/gdk-pixbuf2-2.42.0-x86_64-1.txz:  Upgraded.
l/gdk-pixbuf2-xlib-2.40.2-x86_64-1.txz:  Added.
l/gjs-1.66.1-x86_64-1.txz:  Added.
l/glade-3.38.2-x86_64-1.txz:  Added.
l/glib-networking-2.66.0-x86_64-1.txz:  Upgraded.
l/glib2-2.66.3-x86_64-1.txz:  Upgraded.
l/gobject-introspection-1.66.1-x86_64-1.txz:  Upgraded.
l/gtksourceview3-3.24.11-x86_64-1.txz:  Added.
l/gvfs-1.46.1-x86_64-1.txz:  Upgraded.
l/json-glib-1.6.0-x86_64-1.txz:  Upgraded.
l/librsvg-2.50.2-x86_64-1.txz:  Upgraded.
l/libsass-3.6.4-x86_64-1.txz:  Added.
l/libsoup-2.72.0-x86_64-1.txz:  Upgraded.
l/libwnck3-3.36.0-x86_64-1.txz:  Added.
l/pango-1.48.0-x86_64-1.txz:  Upgraded.
l/pygobject3-3.38.0-x86_64-1.txz:  Upgraded.
l/vte-0.62.1-x86_64-1.txz:  Upgraded.
testing/packages/vtown/deps/libsass-3.6.4-x86_64-1_vtown_1.txz:  Removed.
testing/packages/vtown/deps/sassc-3.6.1-x86_64-1_vtown_1.txz:  Removed.
testing/packages/vtown/deps/upower-0.99.11-x86_64-1_vtown_1.txz:  Removed.
testing/packages/vtown/xfce/Greybird-3.22.12-noarch-1_vtown_1.txz:  Added.
testing/packages/vtown/xfce/elementary-xfce-0.15.1-x86_64-1_vtown_1.txz:  Added.
testing/packages/vtown/xfce/exo-0.12.11-x86_64-2_vtown_1.txz:  Rebuilt.
testing/packages/vtown/xfce/garcon-0.6.4-x86_64-2_vtown_1.txz:  Rebuilt.
testing/packages/vtown/xfce/libxfce4ui-4.14.1-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/libxfce4util-4.14.0-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/mousepad-0.4.2-x86_64-1_vtown_1.txz:  Added.
testing/packages/vtown/xfce/thunar-1.8.16-x86_64-2_vtown_1.txz:  Rebuilt.
testing/packages/vtown/xfce/thunar-volman-0.9.5-x86_64-2_vtown_1.txz:  Rebuilt.
testing/packages/vtown/xfce/tumbler-0.2.9-x86_64-2_vtown_1.txz:  Rebuilt.
testing/packages/vtown/xfce/xfce4-appfinder-4.14.0-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-clipman-plugin-1.6.1-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-dev-tools-4.14.0-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-notifyd-0.6.2-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-panel-4.14.4-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-panel-profiles-1.0.10-x86_64-1_vtown_1.txz:  Added.
testing/packages/vtown/xfce/xfce4-power-manager-1.6.6-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-pulseaudio-plugin-0.4.3-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-screensaver-0.1.11-x86_64-1_vtown_1.txz:  Added.
testing/packages/vtown/xfce/xfce4-screenshooter-1.9.7-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-session-4.14.2-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-settings-4.14.3-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-systemload-plugin-1.2.3-x86_64-2_vtown_1.txz:  Rebuilt.
testing/packages/vtown/xfce/xfce4-taskmanager-1.2.3-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-terminal-0.8.9.2-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-weather-plugin-0.10.2-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfce4-whiskermenu-plugin-2.4.6-x86_64-1_vtown_1.txz:  Added.
testing/packages/vtown/xfce/xfconf-4.14.4-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfdesktop-4.14.3-x86_64-1_vtown_1.txz:  Upgraded.
testing/packages/vtown/xfce/xfwm4-4.14.6-x86_64-1_vtown_1.txz:  Upgraded.

143 files changed, 5055 insertions, 564 deletions

diff --git a/testing/packages/vtown/deps/libsass-3.6.4-x86_64-1_vtown_1.txt b/testing/packages/vtown/deps/libsass-3.6.4-x86_64-1_vtown_1.txt
deleted file mode 100644
index b740d98c..00000000
--- a/testing/packages/vtown/deps/libsass-3.6.4-x86_64-1_vtown_1.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-libsass: libsass (Sass library for C/C++)
-libsass:
-libsass: This is a library implementing Sass (a CSS pre-processor) in C/C++.
-libsass: It is used by SassC, which is the official lightweight CLI tool built
-libsass: by the same people as LibSass.
-libsass:
-libsass: Homepage: https://libsass.org
-libsass:
-libsass:
-libsass:
-libsass:
diff --git a/testing/packages/vtown/deps/sassc-3.6.1-x86_64-1_vtown_1.txt b/testing/packages/vtown/deps/sassc-3.6.1-x86_64-1_vtown_1.txt
deleted file mode 100644
index 297b6e88..00000000
--- a/testing/packages/vtown/deps/sassc-3.6.1-x86_64-1_vtown_1.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-sassc: sassc (Sass CSS preprocessor)
-sassc:
-sassc: SassC is a wrapper around libsass used to generate a useful command-
-sassc: line Sass implementation. Sass is a CSS pre-processor language to add
-sassc: on exciting new features to CSS.
-sassc:
-sassc: Homepage: https://libsass.org
-sassc:
-sassc:
-sassc:
-sassc:
diff --git a/testing/packages/vtown/deps/upower-0.99.11-x86_64-1_vtown_1.txt b/testing/packages/vtown/deps/upower-0.99.11-x86_64-1_vtown_1.txt
deleted file mode 100644
index 0cf9b46b..00000000
--- a/testing/packages/vtown/deps/upower-0.99.11-x86_64-1_vtown_1.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-upower: UPower (power management abstraction daemon)
-upower:
-upower: UPower is an abstraction for enumerating power devices, listening to 
-upower: device events and querying history and statistics. Any application or 
-upower: service on the system can access the org.freedesktop.UPower service 
-upower: via the system message bus. Some operations (such as suspending the 
-upower: system) are restricted using PolicyKit. 
-upower:
-upower: Homepage: http://upower.freedesktop.org/
-upower:
-upower:
diff --git a/testing/packages/vtown/xfce/Greybird-3.22.12-noarch-1_vtown_1.txt b/testing/packages/vtown/xfce/Greybird-3.22.12-noarch-1_vtown_1.txt
new file mode 100644
index 00000000..263cf605
--- /dev/null
+++ b/testing/packages/vtown/xfce/Greybird-3.22.12-noarch-1_vtown_1.txt
@@ -0,0 +1,11 @@
+Greybird: Greybird (Desktop theme suite for Xfce)
+Greybird:
+Greybird: Greybird theme is a desktop theme suite for Xfce.
+Greybird:
+Greybird: Homepage: https://github.com/shimmerproject/Greybird
+Greybird:
+Greybird:
+Greybird:
+Greybird:
+Greybird:
+Greybird:
diff --git a/testing/packages/vtown/xfce/elementary-xfce-0.15.1-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/elementary-xfce-0.15.1-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..29324df4
--- /dev/null
+++ b/testing/packages/vtown/xfce/elementary-xfce-0.15.1-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+elementary-xfce: elementary-xfce (elementary-xfce icon theme)
+elementary-xfce:
+elementary-xfce: Elementary icons forked, extended, and maintained for Xfce.
+elementary-xfce:
+elementary-xfce: Homepage: https://github.com/shimmerproject/elementary-xfce
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
diff --git a/testing/packages/vtown/xfce/exo-0.12.11-x86_64-2_vtown_1.txt b/testing/packages/vtown/xfce/exo-0.12.11-x86_64-2_vtown_1.txt
new file mode 100644
index 00000000..c90146e0
--- /dev/null
+++ b/testing/packages/vtown/xfce/exo-0.12.11-x86_64-2_vtown_1.txt
@@ -0,0 +1,11 @@
+exo: exo (libexo extension library)
+exo:
+exo: This is libexo, an extension library to Xfce, developed by
+exo: os-cillation. While Xfce comes with quite a few libraries that are
+exo: targeted at desktop development, libexo is targeted at application
+exo: development. It also has some helper applications that are used
+exo: throughout the entire desktop.
+exo:
+exo: 
+exo:
+exo:
diff --git a/testing/packages/vtown/xfce/garcon-0.6.4-x86_64-2_vtown_1.txt b/testing/packages/vtown/xfce/garcon-0.6.4-x86_64-2_vtown_1.txt
new file mode 100644
index 00000000..d7fa4322
--- /dev/null
+++ b/testing/packages/vtown/xfce/garcon-0.6.4-x86_64-2_vtown_1.txt
@@ -0,0 +1,11 @@
+garcon: garcon (menu implementation for Xfce)
+garcon:
+garcon: This is garcon, a freedesktop.org compliant menu implementation based
+garcon: on GLib and GIO. It was started as a rewrite of the former Xfce menu
+garcon: library called libxfce4menu.
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
diff --git a/testing/packages/vtown/xfce/libxfce4ui-4.14.1-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/libxfce4ui-4.14.1-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..0912eeee
--- /dev/null
+++ b/testing/packages/vtown/xfce/libxfce4ui-4.14.1-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+libxfce4ui: libxfce4ui (Xfce widget library)
+libxfce4ui:
+libxfce4ui: This is libxfce4ui, the replacement of the old libxfcegui4 library.
+libxfce4ui: It is used to share commonly used Xfce widgets among the Xfce
+libxfce4ui: applications.
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
diff --git a/testing/packages/vtown/xfce/libxfce4util-4.14.0-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/libxfce4util-4.14.0-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..eba7e8f5
--- /dev/null
+++ b/testing/packages/vtown/xfce/libxfce4util-4.14.0-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+libxfce4util: libxfce4util (basic utility library for Xfce)
+libxfce4util:
+libxfce4util: Basic utility library for Xfce. This provides useful functions not
+libxfce4util: relating to the handling of the user interface.
+libxfce4util: 
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
diff --git a/testing/packages/vtown/xfce/mousepad-0.4.2-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/mousepad-0.4.2-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..00d6b691
--- /dev/null
+++ b/testing/packages/vtown/xfce/mousepad-0.4.2-x86_64-1_vtown_1.txt
@@ -0,0 +1,10 @@
+mousepad: mousepad (simple text editor)
+mousepad:
+mousepad: Mousepad is a simple, fast and easy-to-use text editor
+mousepad: for the Xfce desktop environment, based on the Leafpad text editor.
+mousepad: 
+mousepad: Mousepad includes complete support for UTF-8 text,
+mousepad: the usual cut/copy/paste functionality, font selection support, etc.
+mousepad:
+mousepad: Homepage: https://gitlab.xfce.org/apps/mousepad/
+mousepad:
diff --git a/testing/packages/vtown/xfce/thunar-1.8.16-x86_64-2_vtown_1.txt b/testing/packages/vtown/xfce/thunar-1.8.16-x86_64-2_vtown_1.txt
new file mode 100644
index 00000000..10a947b1
--- /dev/null
+++ b/testing/packages/vtown/xfce/thunar-1.8.16-x86_64-2_vtown_1.txt
@@ -0,0 +1,11 @@
+thunar: thunar (file manager)
+thunar:
+thunar: Thunar is a modern file manager for the Xfce Desktop Environment.
+thunar: Thunar has been designed from the ground up to be fast and
+thunar: easy-to-use. Its user interface is clean and intuitive, and does not
+thunar: include any confusing or useless options. Thunar is fast and
+thunar: responsive with a good start up time and directory load time.
+thunar:
+thunar: Homepage: http://thunar.xfce.org
+thunar:
+thunar:
diff --git a/testing/packages/vtown/xfce/thunar-volman-0.9.5-x86_64-2_vtown_1.txt b/testing/packages/vtown/xfce/thunar-volman-0.9.5-x86_64-2_vtown_1.txt
new file mode 100644
index 00000000..9986fec5
--- /dev/null
+++ b/testing/packages/vtown/xfce/thunar-volman-0.9.5-x86_64-2_vtown_1.txt
@@ -0,0 +1,11 @@
+thunar-volman: thunar-volman (Thunar Volume Manager Plugin)
+thunar-volman:
+thunar-volman: thunar-volman is an extension for the Thunar File Manager, which
+thunar-volman: enables automatic management of removable drives and media. 
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
diff --git a/testing/packages/vtown/xfce/tumbler-0.2.9-x86_64-2_vtown_1.txt b/testing/packages/vtown/xfce/tumbler-0.2.9-x86_64-2_vtown_1.txt
new file mode 100644
index 00000000..6c6bbaf1
--- /dev/null
+++ b/testing/packages/vtown/xfce/tumbler-0.2.9-x86_64-2_vtown_1.txt
@@ -0,0 +1,11 @@
+tumbler: tumbler (thumbnail generator)
+tumbler:
+tumbler: Tumbler is a D-Bus service for applications to request thumbnails
+tumbler: for various URI schemes and MIME types. It is written in an object-
+tumbler: oriented fashion using GLib and GObject. It provides plugin
+tumbler: interfaces for extending the URI schemes and MIME types for which
+tumbler: thumbnails can be generated as well as for replacing the storage
+tumbler: backend that is used to store the thumbnails on disk. 
+tumbler:
+tumbler:
+tumbler:
diff --git a/testing/packages/vtown/xfce/xfce4-appfinder-4.14.0-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-appfinder-4.14.0-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..091a2d4f
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-appfinder-4.14.0-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-appfinder: xfce4-appfinder (Application finder)
+xfce4-appfinder:
+xfce4-appfinder: The Xfce application finder is a tool to find and launch installed
+xfce4-appfinder: applications on your system and execute commands. It can also be used
+xfce4-appfinder: to quickly add launchers to the Xfce Panel by dragging an item from
+xfce4-appfinder: the view and dropping it on the panel.
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
diff --git a/testing/packages/vtown/xfce/xfce4-clipman-plugin-1.6.1-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-clipman-plugin-1.6.1-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..9a910670
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-clipman-plugin-1.6.1-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-clipman-plugin: xfce4-clipman-plugin (clipman plugin for the Xfce panel)
+xfce4-clipman-plugin:
+xfce4-clipman-plugin: Clipman allows you to keep several clipboard selections in memory
+xfce4-clipman-plugin: which you can then use to toggle. It can pull the clips from both
+xfce4-clipman-plugin: the selection and the copy buffer, restore your clipboard on login,
+xfce4-clipman-plugin: and prevent an empty clipboard.
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
diff --git a/testing/packages/vtown/xfce/xfce4-dev-tools-4.14.0-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-dev-tools-4.14.0-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..418cce6d
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-dev-tools-4.14.0-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-dev-tools: xfce4-dev-tools (Xfce development tools)
+xfce4-dev-tools:
+xfce4-dev-tools: The Xfce development tools are a collection of tools and macros for
+xfce4-dev-tools: Xfce developers and people that want to build Xfce from Git.
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
diff --git a/testing/packages/vtown/xfce/xfce4-notifyd-0.6.2-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-notifyd-0.6.2-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..86d17544
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-notifyd-0.6.2-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-notifyd: xfce4-notifyd (Xfce Notify Daemon)
+xfce4-notifyd:
+xfce4-notifyd: Xfce4-notifyd is a simple, visually-appealing notification daemon
+xfce4-notifyd: for Xfce. Applications can use xfce4-notifyd to pop up a notification
+xfce4-notifyd: bubble by sending messages through D-Bus.
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
diff --git a/testing/packages/vtown/xfce/xfce4-panel-4.14.4-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-panel-4.14.4-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..d1afa0db
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-panel-4.14.4-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-panel: xfce4-panel (panel for Xfce)
+xfce4-panel:
+xfce4-panel: The Xfce panel is part of the Xfce Desktop Environment and features
+xfce4-panel: program launchers, panel menus, a clock, a desktop switcher, and more.
+xfce4-panel: Many aspects of the panel can be configured through graphical dialogs,
+xfce4-panel: but also by GTK+ style properties and Xfconf settings.
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
diff --git a/testing/packages/vtown/xfce/xfce4-panel-profiles-1.0.10-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-panel-profiles-1.0.10-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..e1545088
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-panel-profiles-1.0.10-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-panel-profiles: xfce4-panel-profiles (simple app to manage Xfce panel layouts)
+xfce4-panel-profiles:
+xfce4-panel-profiles: xfce4-panel-profiles (formerly known as xfpanel-switch) is a simple 
+xfce4-panel-profiles: application to manage Xfce panel layouts.
+xfce4-panel-profiles:
+xfce4-panel-profiles: With the modular Xfce Panel, a multitude of panel layouts can be 
+xfce4-panel-profiles: created. This tool makes it possible to backup, restore, import, 
+xfce4-panel-profiles: and export these panel layouts.
+xfce4-panel-profiles:
+xfce4-panel-profiles: Homepage: https://git.xfce.org/apps/xfce4-panel-profiles
+xfce4-panel-profiles:
diff --git a/testing/packages/vtown/xfce/xfce4-power-manager-1.6.6-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-power-manager-1.6.6-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..8ba3e32d
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-power-manager-1.6.6-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce)
+xfce4-power-manager:
+xfce4-power-manager: xfce4-power-manager makes power management functions (such as suspend
+xfce4-power-manager: and hibernate) easy inside the Xfce Desktop Environment.
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
diff --git a/testing/packages/vtown/xfce/xfce4-pulseaudio-plugin-0.4.3-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-pulseaudio-plugin-0.4.3-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..d95651f7
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-pulseaudio-plugin-0.4.3-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-pulseaudio-plugin: xfce4-pulseaudio-plugin (PulseAudio plugin for Xfce panel)
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin: xfce4-pulseaudio-plugin is a plugin for the Xfce panel which provides
+xfce4-pulseaudio-plugin: a convenient way to adjust the audio volume of the PulseAudio sound
+xfce4-pulseaudio-plugin: system and to an auto mixer tool like pavucontrol. It can optionally
+xfce4-pulseaudio-plugin: handle multimedia keys for controlling the audio volume.
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
diff --git a/testing/packages/vtown/xfce/xfce4-screensaver-0.1.11-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-screensaver-0.1.11-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..8038c324
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-screensaver-0.1.11-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-screensaver: xfce4-screensaver (screen saver and locker for Xfce)
+xfce4-screensaver:
+xfce4-screensaver: xfce4-screensaver is a screen saver and locker that aims to have
+xfce4-screensaver: simple, sane, secure defaults and be well integrated with the desktop.
+xfce4-screensaver:
+xfce4-screensaver: This project is a port of MATE Screensaver. It has been tightly 
+xfce4-screensaver: integrated with the Xfce desktop, utilizing Xfce libraries and the 
+xfce4-screensaver: Xfconf configuration backend.
+xfce4-screensaver:
+xfce4-screensaver:
+xfce4-screensaver:
diff --git a/testing/packages/vtown/xfce/xfce4-screenshooter-1.9.7-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-screenshooter-1.9.7-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..d6292bd6
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-screenshooter-1.9.7-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-screenshooter: xfce4-screenshooter (screenshooter plugin for Xfce)
+xfce4-screenshooter:
+xfce4-screenshooter: The screenshooter plugin adds a panel button that allows you to take
+xfce4-screenshooter: screenshots.
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
diff --git a/testing/packages/vtown/xfce/xfce4-session-4.14.2-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-session-4.14.2-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..3497f855
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-session-4.14.2-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-session: xfce4-session (Xfce session manager)
+xfce4-session:
+xfce4-session: Xfce4-session is a session manager for Xfce. Its task is to save the
+xfce4-session: state of your desktop (opened applications and their location) and
+xfce4-session: restore it during a next startup. You can create several different
+xfce4-session: sessions and choose one of them on startup.
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
diff --git a/testing/packages/vtown/xfce/xfce4-settings-4.14.3-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-settings-4.14.3-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..84b8cb8e
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-settings-4.14.3-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-settings: xfce4-settings (Xfce settings manager)
+xfce4-settings:
+xfce4-settings: xfce4-settings is the Xfce settings manager front-end. It comes with
+xfce4-settings: several different components for configuring application-independent
+xfce4-settings: settings inside xfconf.
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
diff --git a/testing/packages/vtown/xfce/xfce4-systemload-plugin-1.2.3-x86_64-2_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-systemload-plugin-1.2.3-x86_64-2_vtown_1.txt
new file mode 100644
index 00000000..73ab6722
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-systemload-plugin-1.2.3-x86_64-2_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-systemload-plugin: xfce4-systemload-plugin (systemload plugin for the Xfce panel)
+xfce4-systemload-plugin:
+xfce4-systemload-plugin: This plugin displays the current system load on the Xfce panel.
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
diff --git a/testing/packages/vtown/xfce/xfce4-taskmanager-1.2.3-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-taskmanager-1.2.3-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..0bbe745b
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-taskmanager-1.2.3-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-taskmanager: xfce4-taskmanager (running apps / task manager application)
+xfce4-taskmanager:
+xfce4-taskmanager: xfce4-taskmanager shows a list of running apps (similar to the
+xfce4-taskmanager: task manager included with some other operating systems)  :)
+xfce4-taskmanager:
+xfce4-taskmanager: The taskmanager is started by running the command 'xfce4-taskmanager'
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
diff --git a/testing/packages/vtown/xfce/xfce4-terminal-0.8.9.2-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-terminal-0.8.9.2-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..7924ef67
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-terminal-0.8.9.2-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-terminal: xfce4-terminal (Xfce's Terminal Emulator)
+xfce4-terminal:
+xfce4-terminal: This is the Xfce terminal emulator application. xfce4-terminal is 
+xfce4-terminal: a lightweight and easy to use terminal emulator for the X windowing
+xfce4-terminal: system, with some new ideas and features that make it unique among 
+xfce4-terminal: X terminal emulators.
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
diff --git a/testing/packages/vtown/xfce/xfce4-weather-plugin-0.10.2-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-weather-plugin-0.10.2-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..fa3bc626
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-weather-plugin-0.10.2-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-weather-plugin: xfce4-weather-plugin (weather plugin for the Xfce panel)
+xfce4-weather-plugin:
+xfce4-weather-plugin: The weather plugin displays current weather conditions and forecasts.
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
diff --git a/testing/packages/vtown/xfce/xfce4-whiskermenu-plugin-2.4.6-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfce4-whiskermenu-plugin-2.4.6-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..627c65f3
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfce4-whiskermenu-plugin-2.4.6-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfce4-whiskermenu-plugin: xfce4-whiskermenu-plugin (alternate application launcher for Xfce)
+xfce4-whiskermenu-plugin:
+xfce4-whiskermenu-plugin: Whisker Menu is an alternate application launcher for Xfce. When you
+xfce4-whiskermenu-plugin: open it you are shown a list of applications you have marked as
+xfce4-whiskermenu-plugin: favorites. You can browse through all of your installed applications
+xfce4-whiskermenu-plugin: by clicking on the category buttons on the side. Top level categories
+xfce4-whiskermenu-plugin: make browsing fast, and simple to switch between. Additionally,
+xfce4-whiskermenu-plugin: Whisker Menu keeps a list of the last ten applications
+xfce4-whiskermenu-plugin: that you've launched from it.
+xfce4-whiskermenu-plugin:
+xfce4-whiskermenu-plugin: Homepage: http://gottcode.org/xfce4-whiskermenu-plugin
diff --git a/testing/packages/vtown/xfce/xfconf-4.14.4-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfconf-4.14.4-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..37df176e
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfconf-4.14.4-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfconf: xfconf (Xfce configuration storage system)
+xfconf:
+xfconf: A daemon and query system for managing the storage and retrieval of
+xfconf: settings for the Xfce Desktop Environment, both graphically as well as
+xfconf: from the command line.
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
diff --git a/testing/packages/vtown/xfce/xfdesktop-4.14.3-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfdesktop-4.14.3-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..d5e87ee7
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfdesktop-4.14.3-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfdesktop: xfdesktop (Xfce desktop manager)
+xfdesktop:
+xfdesktop: Xfdesktop is a desktop manager for the Xfce Desktop Environment.
+xfdesktop: Desktop in this respect means the root window. The manager handles
+xfdesktop: tasks such as the background image and color, the root menu and window
+xfdesktop: list, minimized application icons, and file icons on the desktop.
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
diff --git a/testing/packages/vtown/xfce/xfwm4-4.14.6-x86_64-1_vtown_1.txt b/testing/packages/vtown/xfce/xfwm4-4.14.6-x86_64-1_vtown_1.txt
new file mode 100644
index 00000000..dc0eb5b7
--- /dev/null
+++ b/testing/packages/vtown/xfce/xfwm4-4.14.6-x86_64-1_vtown_1.txt
@@ -0,0 +1,11 @@
+xfwm4: xfwm4 (Xfce Window Manager)
+xfwm4:
+xfwm4: This package contains xfwm4 which is the window manager for Xfce4.
+xfwm4: It is designed to run with the rest of Xfce, but it also makes a
+xfwm4: capable window manager for any X11 environment.
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
diff --git a/testing/source/vtown/deps/libsass/libsass.url b/testing/source/vtown/deps/libsass/libsass.url
deleted file mode 100644
index dcecdede..00000000
--- a/testing/source/vtown/deps/libsass/libsass.url
+++ /dev/null
@@ -1 +0,0 @@
-https://github.com/sass/libsass
diff --git a/testing/source/vtown/deps/sassc/sassc.url b/testing/source/vtown/deps/sassc/sassc.url
deleted file mode 100644
index 7fc72dc1..00000000
--- a/testing/source/vtown/deps/sassc/sassc.url
+++ /dev/null
@@ -1 +0,0 @@
-https://github.com/sass/sassc
diff --git a/testing/source/vtown/deps/sassc/slack-desc b/testing/source/vtown/deps/sassc/slack-desc
deleted file mode 100644
index 7d9aa060..00000000
--- a/testing/source/vtown/deps/sassc/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-     |-----handy-ruler------------------------------------------------------|
-sassc: sassc (Sass CSS preprocessor)
-sassc:
-sassc: SassC is a wrapper around libsass used to generate a useful command-
-sassc: line Sass implementation. Sass is a CSS pre-processor language to add
-sassc: on exciting new features to CSS.
-sassc:
-sassc: Homepage: https://libsass.org
-sassc:
-sassc:
-sassc:
-sassc:
diff --git a/testing/source/vtown/deps/upower/doinst.sh b/testing/source/vtown/deps/upower/doinst.sh
deleted file mode 100644
index 46abf401..00000000
--- a/testing/source/vtown/deps/upower/doinst.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-config etc/UPower/UPower.conf.new
-
diff --git a/testing/source/vtown/deps/upower/patches/0002-linux-Fix-memory-leak-in-Bluez-backend.patch b/testing/source/vtown/deps/upower/patches/0002-linux-Fix-memory-leak-in-Bluez-backend.patch
deleted file mode 100644
index 0a45dcf1..00000000
--- a/testing/source/vtown/deps/upower/patches/0002-linux-Fix-memory-leak-in-Bluez-backend.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 8e6cb06ff68a283b9857d4d0e831d93c42521534 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Thu, 17 Oct 2019 16:36:58 +0200
-Subject: [PATCH 2/7] linux: Fix memory leak in Bluez backend
-
-g_dbus_proxy_get_cached_property() returns transfer full GVariants.
----
- src/linux/up-device-bluez.c | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
-diff --git a/src/linux/up-device-bluez.c b/src/linux/up-device-bluez.c
-index cd89529..5e595a9 100644
---- a/src/linux/up-device-bluez.c
-+++ b/src/linux/up-device-bluez.c
-@@ -71,9 +71,10 @@ up_device_bluez_coldplug (UpDevice *device)
- 	GDBusProxy *proxy;
- 	GError *error = NULL;
- 	UpDeviceKind kind;
-+	guint16 appearance;
- 	const char *uuid;
- 	const char *model;
--	guint16 appearance;
-+	GVariant *v;
- 	guchar percentage;
- 
- 	/* Static device properties */
-@@ -93,10 +94,18 @@ up_device_bluez_coldplug (UpDevice *device)
- 		return FALSE;
- 	}
- 
--	appearance = g_variant_get_uint16 (g_dbus_proxy_get_cached_property (proxy, "Appearance"));
-+	v = g_dbus_proxy_get_cached_property (proxy, "Appearance");
-+	appearance = g_variant_get_uint16 (v);
- 	kind = appearance_to_kind (appearance);
--	uuid = g_variant_get_string (g_dbus_proxy_get_cached_property (proxy, "Address"), NULL);
--	model = g_variant_get_string (g_dbus_proxy_get_cached_property (proxy, "Alias"), NULL);
-+	g_variant_unref (v);
-+
-+	v = g_dbus_proxy_get_cached_property (proxy, "Address");
-+	uuid = g_variant_get_string (v, NULL);
-+	g_variant_unref (v);
-+
-+	v = g_dbus_proxy_get_cached_property (proxy, "Alias");
-+	model = g_variant_get_string (v, NULL);
-+	g_variant_unref (v);
- 
- 	/* hardcode some values */
- 	g_object_set (device,
--- 
-2.24.1
-
diff --git a/testing/source/vtown/deps/upower/patches/0003-linux-Fix-warning-when-bluez-Appearance-property-isn.patch b/testing/source/vtown/deps/upower/patches/0003-linux-Fix-warning-when-bluez-Appearance-property-isn.patch
deleted file mode 100644
index 156631a7..00000000
--- a/testing/source/vtown/deps/upower/patches/0003-linux-Fix-warning-when-bluez-Appearance-property-isn.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From ed0dfe4427770776a081877f77f1263491fbe1b6 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Thu, 17 Oct 2019 16:43:15 +0200
-Subject: [PATCH 3/7] linux: Fix warning when bluez Appearance property isn't
- set
-
-The Appearance property might not be available, and would cause
-warnings like:
-upowerd[17733]: g_variant_get_type: assertion 'value != NULL' failed
-upowerd[17733]: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
-upowerd[17733]: g_variant_get_uint16: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_UINT16)' failed
----
- src/linux/up-device-bluez.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/src/linux/up-device-bluez.c b/src/linux/up-device-bluez.c
-index 5e595a9..2074746 100644
---- a/src/linux/up-device-bluez.c
-+++ b/src/linux/up-device-bluez.c
-@@ -71,7 +71,6 @@ up_device_bluez_coldplug (UpDevice *device)
- 	GDBusProxy *proxy;
- 	GError *error = NULL;
- 	UpDeviceKind kind;
--	guint16 appearance;
- 	const char *uuid;
- 	const char *model;
- 	GVariant *v;
-@@ -95,9 +94,15 @@ up_device_bluez_coldplug (UpDevice *device)
- 	}
- 
- 	v = g_dbus_proxy_get_cached_property (proxy, "Appearance");
--	appearance = g_variant_get_uint16 (v);
--	kind = appearance_to_kind (appearance);
--	g_variant_unref (v);
-+	if (v) {
-+		guint16 appearance;
-+
-+		appearance = g_variant_get_uint16 (v);
-+		kind = appearance_to_kind (appearance);
-+		g_variant_unref (v);
-+	} else {
-+		kind = UP_DEVICE_KIND_UNKNOWN;
-+	}
- 
- 	v = g_dbus_proxy_get_cached_property (proxy, "Address");
- 	uuid = g_variant_get_string (v, NULL);
--- 
-2.24.1
-
diff --git a/testing/source/vtown/deps/upower/patches/0006-lib-Add-Pen-device-type.patch b/testing/source/vtown/deps/upower/patches/0006-lib-Add-Pen-device-type.patch
deleted file mode 100644
index f05b108d..00000000
--- a/testing/source/vtown/deps/upower/patches/0006-lib-Add-Pen-device-type.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 72b85b8c1371f3396c293d9a2aa373b6a7551f63 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Thu, 24 Oct 2019 12:50:26 +0200
-Subject: [PATCH 6/7] lib: Add "Pen" device type
-
-So we can track the battery information for powered tablet pens, rather
-than labelling them as tablets.
----
- libupower-glib/up-device.c | 6 ++++--
- libupower-glib/up-types.c  | 4 ++++
- libupower-glib/up-types.h  | 1 +
- src/linux/integration-test | 3 ++-
- 4 files changed, 11 insertions(+), 3 deletions(-)
-
-diff --git a/libupower-glib/up-device.c b/libupower-glib/up-device.c
-index e21274d..01f752f 100644
---- a/libupower-glib/up-device.c
-+++ b/libupower-glib/up-device.c
-@@ -313,7 +313,8 @@ up_device_to_text (UpDevice *device)
- 	     kind == UP_DEVICE_KIND_BATTERY ||
- 	     kind == UP_DEVICE_KIND_MOUSE ||
- 	     kind == UP_DEVICE_KIND_KEYBOARD ||
--	     kind == UP_DEVICE_KIND_GAMING_INPUT) &&
-+	     kind == UP_DEVICE_KIND_GAMING_INPUT ||
-+	     kind == UP_DEVICE_KIND_PEN) &&
- 	    !is_display)
- 		g_string_append_printf (string, "    rechargeable:        %s\n", up_device_bool_to_string (up_exported_device_get_is_rechargeable (priv->proxy_device)));
- 	if (kind == UP_DEVICE_KIND_BATTERY ||
-@@ -367,7 +368,8 @@ up_device_to_text (UpDevice *device)
- 	    kind == UP_DEVICE_KIND_COMPUTER ||
- 	    kind == UP_DEVICE_KIND_MEDIA_PLAYER ||
- 	    kind == UP_DEVICE_KIND_UPS ||
--	    kind == UP_DEVICE_KIND_GAMING_INPUT) {
-+	    kind == UP_DEVICE_KIND_GAMING_INPUT ||
-+	    kind == UP_DEVICE_KIND_PEN) {
- 		if (battery_level == UP_DEVICE_LEVEL_NONE)
- 			g_string_append_printf (string, "    percentage:          %g%%\n", up_exported_device_get_percentage (priv->proxy_device));
- 		else
-diff --git a/libupower-glib/up-types.c b/libupower-glib/up-types.c
-index 525cd02..7cf9573 100644
---- a/libupower-glib/up-types.c
-+++ b/libupower-glib/up-types.c
-@@ -71,6 +71,8 @@ up_device_kind_to_string (UpDeviceKind type_enum)
- 		return "computer";
- 	case UP_DEVICE_KIND_GAMING_INPUT:
- 		return "gaming-input";
-+	case UP_DEVICE_KIND_PEN:
-+		return "pen";
- 	default:
- 		return "unknown";
- 	}
-@@ -113,6 +115,8 @@ up_device_kind_from_string (const gchar *type)
- 		return UP_DEVICE_KIND_TABLET;
- 	if (g_str_equal (type, "gaming-input"))
- 		return UP_DEVICE_KIND_GAMING_INPUT;
-+	if (g_str_equal (type, "pen"))
-+		return UP_DEVICE_KIND_PEN;
- 	return UP_DEVICE_KIND_UNKNOWN;
- }
- 
-diff --git a/libupower-glib/up-types.h b/libupower-glib/up-types.h
-index 079bccd..379d46c 100644
---- a/libupower-glib/up-types.h
-+++ b/libupower-glib/up-types.h
-@@ -49,6 +49,7 @@ typedef enum {
- 	UP_DEVICE_KIND_TABLET,
- 	UP_DEVICE_KIND_COMPUTER,
- 	UP_DEVICE_KIND_GAMING_INPUT,
-+	UP_DEVICE_KIND_PEN,
- 	UP_DEVICE_KIND_LAST
- } UpDeviceKind;
- 
-diff --git a/src/linux/integration-test b/src/linux/integration-test
-index 7098a67..e5c6c46 100755
---- a/src/linux/integration-test
-+++ b/src/linux/integration-test
-@@ -86,7 +86,8 @@ BATTERY_IFACE = 'org.bluez.Battery1'
-  UP_DEVICE_KIND_MEDIA_PLAYER,
-  UP_DEVICE_KIND_TABLET,
-  UP_DEVICE_KIND_COMPUTER,
-- UP_DEVICE_KIND_GAMING_INPUT) = (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12)
-+ UP_DEVICE_KIND_GAMING_INPUT,
-+ UP_DEVICE_KIND_PEN) = (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13)
- 
- class Tests(dbusmock.DBusTestCase):
-     @classmethod
--- 
-2.24.1
-
diff --git a/testing/source/vtown/deps/upower/patches/0007-linux-Detect-Bluetooth-pens.patch b/testing/source/vtown/deps/upower/patches/0007-linux-Detect-Bluetooth-pens.patch
deleted file mode 100644
index 13624db0..00000000
--- a/testing/source/vtown/deps/upower/patches/0007-linux-Detect-Bluetooth-pens.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 85cd95ae53499788a0df86af28876ec27074caa2 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Thu, 24 Oct 2019 12:52:33 +0200
-Subject: [PATCH 1/3] linux: Detect Bluetooth pens
-
-Numbers from:
-https://www.bluetooth.com/specifications/assigned-numbers/baseband/
----
- src/linux/up-device-bluez.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/src/linux/up-device-bluez.c b/src/linux/up-device-bluez.c
-index 2074746..8673d82 100644
---- a/src/linux/up-device-bluez.c
-+++ b/src/linux/up-device-bluez.c
-@@ -52,6 +52,9 @@ appearance_to_kind (guint16 appearance)
-                         return UP_DEVICE_KIND_GAMING_INPUT;
-                 case 0x05:
-                         return UP_DEVICE_KIND_TABLET;
-+                case 0x0e:
-+                case 0x0f:
-+                        return UP_DEVICE_KIND_PEN;
-                 }
-                 break;
-         }
--- 
-2.26.2
-
diff --git a/testing/source/vtown/deps/upower/patches/0008-linux-Identify-keyboard-pointing-device-combos-as-ke.patch b/testing/source/vtown/deps/upower/patches/0008-linux-Identify-keyboard-pointing-device-combos-as-ke.patch
deleted file mode 100644
index f8fece70..00000000
--- a/testing/source/vtown/deps/upower/patches/0008-linux-Identify-keyboard-pointing-device-combos-as-ke.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From e0b8354e9cf53a271e66a7ba44fd567daeac2416 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Tue, 5 May 2020 16:07:31 +0200
-Subject: [PATCH 2/3] linux: Identify keyboard/pointing device combos as
- keyboards
-
-Rather than using the type of the first sibling device we find, which is
-usually the pointing device portion, make sure that keyboard/pointing
-device combo devices are identified as keyboards.
----
- src/linux/up-device-supply.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
-diff --git a/src/linux/up-device-supply.c b/src/linux/up-device-supply.c
-index d7e4423..9302119 100644
---- a/src/linux/up-device-supply.c
-+++ b/src/linux/up-device-supply.c
-@@ -888,7 +888,7 @@ up_device_supply_get_sibling_with_subsystem (GUdevDevice *device,
- 	class[0] = subsystem;
- 	client = g_udev_client_new (class);
- 	devices = g_udev_client_query_by_subsystem (client, subsystem);
--	for (l = devices; l != NULL && sibling == NULL; l = l->next) {
-+	for (l = devices; l != NULL; l = l->next) {
- 		GUdevDevice *d = l->data;
- 		GUdevDevice *p;
- 		const char *p_path;
-@@ -897,8 +897,14 @@ up_device_supply_get_sibling_with_subsystem (GUdevDevice *device,
- 		if (!p)
- 			continue;
- 		p_path = g_udev_device_get_sysfs_path (p);
--		if (g_strcmp0 (p_path, parent_path) == 0)
--			sibling = g_object_ref (d);
-+		if (g_strcmp0 (p_path, parent_path) == 0) {
-+			if (sibling != NULL &&
-+			    g_udev_device_get_property_as_boolean (d, "ID_INPUT_KEYBOARD")) {
-+				g_clear_object (&sibling);
-+			}
-+			if (sibling == NULL)
-+				sibling = g_object_ref (d);
-+		}
- 
- 		g_object_unref (p);
- 	}
--- 
-2.26.2
-
diff --git a/testing/source/vtown/deps/upower/patches/0011-linux-Add-support-for-iPhone-XR-XS-models.patch b/testing/source/vtown/deps/upower/patches/0011-linux-Add-support-for-iPhone-XR-XS-models.patch
deleted file mode 100644
index 2426e044..00000000
--- a/testing/source/vtown/deps/upower/patches/0011-linux-Add-support-for-iPhone-XR-XS-models.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 97185bae75b16bea48d532aa5511417e485b1c06 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Wed, 17 Jun 2020 10:51:09 +0200
-Subject: [PATCH 1/4] linux: Add support for iPhone XR, XS models
-
-Modifying the udev serial to be acceptable as an hyphened UDID, as the
-usbmux stack expects.
-
-Closes: #114
----
- src/linux/up-device-idevice.c | 28 ++++++++++++++++++++++++++--
- 1 file changed, 26 insertions(+), 2 deletions(-)
-
-diff --git a/src/linux/up-device-idevice.c b/src/linux/up-device-idevice.c
-index a808269..d2fa0a1 100644
---- a/src/linux/up-device-idevice.c
-+++ b/src/linux/up-device-idevice.c
-@@ -203,6 +203,28 @@ out:
- 	return G_SOURCE_CONTINUE;
- }
- 
-+static char *
-+get_device_uuid (GUdevDevice *native)
-+{
-+	const char *uuid;
-+	char *retval;
-+
-+	uuid = g_udev_device_get_property (native, "ID_SERIAL_SHORT");
-+	if (uuid == NULL)
-+		return NULL;
-+
-+	if (strlen (uuid) != 24)
-+		return g_strdup (uuid);
-+
-+	/* new style UDID: add hyphen between first 8 and following 16 digits */
-+	retval = g_malloc0 (24 + 1 + 1);
-+	memcpy (&retval[0], &uuid[0], 8);
-+	retval[8] = '-';
-+	memcpy (&retval[9], &uuid[8], 16);
-+
-+	return retval;
-+}
-+
- /**
-  * up_device_idevice_coldplug:
-  *
-@@ -213,7 +235,7 @@ up_device_idevice_coldplug (UpDevice *device)
- {
- 	UpDeviceIdevice *idevice = UP_DEVICE_IDEVICE (device);
- 	GUdevDevice *native;
--	const gchar *uuid;
-+	char *uuid;
- 	const gchar *model;
- 	UpDeviceKind kind;
- 
-@@ -223,7 +245,7 @@ up_device_idevice_coldplug (UpDevice *device)
- 		return FALSE;
- 
- 	/* Get the UUID */
--	uuid = g_udev_device_get_property (native, "ID_SERIAL_SHORT");
-+	uuid = get_device_uuid (native);
- 	if (uuid == NULL)
- 		return FALSE;
- 
-@@ -253,6 +275,8 @@ up_device_idevice_coldplug (UpDevice *device)
- 	g_source_set_name_by_id (idevice->priv->start_id,
- 				 "[upower] up_device_idevice_start_poll_cb (linux)");
- 
-+	g_free (uuid);
-+
- 	return TRUE;
- }
- 
--- 
-2.27.0
-
diff --git a/testing/source/vtown/deps/upower/patches/0012-build-Use-a-newer-libplist-if-available.patch b/testing/source/vtown/deps/upower/patches/0012-build-Use-a-newer-libplist-if-available.patch
deleted file mode 100644
index d7e24ecf..00000000
--- a/testing/source/vtown/deps/upower/patches/0012-build-Use-a-newer-libplist-if-available.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 694207d3f08bdd2095f01eee09eb523363800825 Mon Sep 17 00:00:00 2001
-From: Bastien Nocera <hadess@hadess.net>
-Date: Tue, 16 Jun 2020 14:04:25 +0200
-Subject: [PATCH 2/4] build: Use a newer libplist if available
-
----
- configure.ac | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index a96b794..5f08d91 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -202,8 +202,10 @@ if test x$with_backend = xlinux; then
- 	PKG_CHECK_MODULES(USB, [libusb-1.0 >= 1.0.0])
- 	AC_ARG_WITH(idevice, AS_HELP_STRING([--without-idevice],[Build without libimobiledevice]),
- 		    with_idevice=$withval,with_idevice=yes)
-+	LIBPLIST_DEP=libplist
-+	PKG_CHECK_EXISTS(libplist-2.0, LIBPLIST_DEP=libplist-2.0)
- 	AS_IF([test "x$with_idevice" != "xno"],
--	      [PKG_CHECK_MODULES(IDEVICE, libimobiledevice-1.0 >= 0.9.7 libplist >= 0.12, have_idevice=yes, have_idevice=no)],
-+	      [PKG_CHECK_MODULES(IDEVICE, libimobiledevice-1.0 >= 0.9.7 $LIBPLIST_DEP, have_idevice=yes, have_idevice=no)],
- 	      [have_idevice=no])
- 	AS_IF([test "x$have_idevice" = "xyes"],
- 	      [AC_DEFINE(HAVE_IDEVICE, 1, [Define to 1 if iDevice is going to be built])])
--- 
-2.27.0
-
diff --git a/testing/source/vtown/deps/upower/slack-desc b/testing/source/vtown/deps/upower/slack-desc
deleted file mode 100644
index b4401b93..00000000
--- a/testing/source/vtown/deps/upower/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-upower: UPower (power management abstraction daemon)
-upower:
-upower: UPower is an abstraction for enumerating power devices, listening to 
-upower: device events and querying history and statistics. Any application or 
-upower: service on the system can access the org.freedesktop.UPower service 
-upower: via the system message bus. Some operations (such as suspending the 
-upower: system) are restricted using PolicyKit. 
-upower:
-upower: Homepage: http://upower.freedesktop.org/
-upower:
-upower:
diff --git a/testing/source/vtown/deps/upower/upower.url b/testing/source/vtown/deps/upower/upower.url
deleted file mode 100644
index 9a4f5559..00000000
--- a/testing/source/vtown/deps/upower/upower.url
+++ /dev/null
@@ -1 +0,0 @@
-https://gitlab.freedesktop.org/upower/upower/-/releases
diff --git a/testing/source/vtown/xfce/Greybird/0001-Fix-GTK3-dark-colors.patch b/testing/source/vtown/xfce/Greybird/0001-Fix-GTK3-dark-colors.patch
new file mode 100644
index 00000000..631d059d
--- /dev/null
+++ b/testing/source/vtown/xfce/Greybird/0001-Fix-GTK3-dark-colors.patch
@@ -0,0 +1,28 @@
+From 32a8e4d331fb06f58f0369e8c3422e2efc8ef56e Mon Sep 17 00:00:00 2001
+From: Nico Kaiser <nico.kaiser@boerse-go.de>
+Date: Mon, 27 Apr 2020 18:43:06 +0200
+Subject: [PATCH 1/2] Fix GTK3 dark colors
+
+---
+ light/gtk-3.0/_colors.scss | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/light/gtk-3.0/_colors.scss b/light/gtk-3.0/_colors.scss
+index d53071c..5d8a4af 100644
+--- a/light/gtk-3.0/_colors.scss
++++ b/light/gtk-3.0/_colors.scss
+@@ -2,9 +2,9 @@
+ // it gets @if ed depending on $variant
+ 
+ 
+-$base_color: if($variant == 'light', #fcfcfc, #292929);
++$base_color: if($variant == 'light', #fcfcfc, #2d2e30);
+ $text_color: if($variant == 'light', #212121, white);
+-$bg_color: if($variant == 'light', #cecece, #393f3f);
++$bg_color: if($variant == 'light', #cecece, #3b3e3f);
+ $fg_color: if($variant == 'light', #3c3c3c, #eeeeec);
+ 
+ $selected_fg_color: #ffffff;
+-- 
+2.29.2
+
diff --git a/testing/source/vtown/xfce/Greybird/0002-Fix-Thunar-CSD-when-not-focused-Fixes-274.patch b/testing/source/vtown/xfce/Greybird/0002-Fix-Thunar-CSD-when-not-focused-Fixes-274.patch
new file mode 100644
index 00000000..fbf091c9
--- /dev/null
+++ b/testing/source/vtown/xfce/Greybird/0002-Fix-Thunar-CSD-when-not-focused-Fixes-274.patch
@@ -0,0 +1,25 @@
+From 55c7a77386e440523b4b9bdc27dd4d553f2f8c52 Mon Sep 17 00:00:00 2001
+From: Simon Steinbeiss <simon.steinbeiss@elfenbeinturm.at>
+Date: Mon, 8 Jun 2020 23:30:11 +0200
+Subject: [PATCH 2/2] Fix Thunar CSD when not focused (Fixes #274)
+
+---
+ light/gtk-3.0/_xfce.scss | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/light/gtk-3.0/_xfce.scss b/light/gtk-3.0/_xfce.scss
+index 5ea4a2b..6c92174 100644
+--- a/light/gtk-3.0/_xfce.scss
++++ b/light/gtk-3.0/_xfce.scss
+@@ -149,7 +149,7 @@ wnck-pager {
+ 
+ /* Thunar's sidebar top border */
+ .thunar {
+-  :backdrop { color: $insensitive_fg_color; }
++  grid :backdrop { color: $insensitive_fg_color; }
+   toolbar {
+     border-bottom: none;
+ 
+-- 
+2.29.2
+
diff --git a/testing/source/vtown/xfce/Greybird/Greybird.SlackBuild b/testing/source/vtown/xfce/Greybird/Greybird.SlackBuild
new file mode 100755
index 00000000..e6638c03
--- /dev/null
+++ b/testing/source/vtown/xfce/Greybird/Greybird.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for Greybird (Gtk Theme)
+
+# Copyright 2019  Robby Workman, Tuscaloosa, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=Greybird
+VERSION=${VERSION:-3.22.12}
+BUILD=${BUILD:-1_vtown_1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+ARCH=noarch
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+# Include a couple of patches from git:
+zcat $CWD/0001-Fix-GTK3-dark-colors.patch.gz | patch -p1 --verbose || exit 1
+zcat $CWD/0002-Fix-Thunar-CSD-when-not-focused-Fixes-274.patch.gz | patch -p1 --verbose || exit 1
+
+# Configure, build, and install:
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+mkdir meson-build
+cd meson-build
+meson setup \
+  --prefix=/usr \
+  --libdir=lib${LIBDIRSUFFIX} \
+  --libexecdir=/usr/libexec \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --includedir=/usr/include \
+  --datadir=/usr/share \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --buildtype=release \
+  .. || exit 1
+  "${NINJA:=ninja}" $NUMJOBS || exit 1
+  DESTDIR=$PKG $NINJA install || exit 1
+cd ..
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a LICENSE* README.md $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/Greybird/slack-desc b/testing/source/vtown/xfce/Greybird/slack-desc
new file mode 100644
index 00000000..8e400d27
--- /dev/null
+++ b/testing/source/vtown/xfce/Greybird/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+Greybird: Greybird (Desktop theme suite for Xfce)
+Greybird:
+Greybird: Greybird theme is a desktop theme suite for Xfce.
+Greybird:
+Greybird: Homepage: https://github.com/shimmerproject/Greybird
+Greybird:
+Greybird:
+Greybird:
+Greybird:
+Greybird:
+Greybird:
diff --git a/testing/source/vtown/xfce/elementary-xfce/README b/testing/source/vtown/xfce/elementary-xfce/README
new file mode 100644
index 00000000..b92d43f3
--- /dev/null
+++ b/testing/source/vtown/xfce/elementary-xfce/README
@@ -0,0 +1,5 @@
+This is an icon-theme maintained with Xfce in mind, but it supports other 
+desktops like Gnome3 as well.  It's a fork of the upstream elementary-project, 
+which took place because the team decided to drop a lot of desktop-specific 
+symlinks. This icon-theme is supposed to keep everything working, but 
+we'll still pull new icons from upstream and integrate them occasionally.
diff --git a/testing/source/vtown/xfce/elementary-xfce/doinst.sh b/testing/source/vtown/xfce/elementary-xfce/doinst.sh
new file mode 100644
index 00000000..320b5363
--- /dev/null
+++ b/testing/source/vtown/xfce/elementary-xfce/doinst.sh
@@ -0,0 +1,24 @@
+if [ -e usr/share/icons/elementary-xfce/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/elementary-xfce>/dev/null 2>&1
+  fi
+fi
+
+if [ -e usr/share/icons/elementary-xfce-dark/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/elementary-xfce-dark>/dev/null 2>&1
+  fi
+fi
+
+if [ -e usr/share/icons/elementary-xfce-darker/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/elementary-xfce-darker>/dev/null 2>&1
+  fi
+fi
+
+if [ -e usr/share/icons/elementary-xfce-darkest/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/elementary-xfce-darkest>/dev/null 2>&1
+  fi
+fi
+
diff --git a/testing/source/vtown/xfce/elementary-xfce/elementary-xfce.SlackBuild b/testing/source/vtown/xfce/elementary-xfce/elementary-xfce.SlackBuild
new file mode 100755
index 00000000..6e420343
--- /dev/null
+++ b/testing/source/vtown/xfce/elementary-xfce/elementary-xfce.SlackBuild
@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# Slackware build script for elementary-xfce
+
+# Copyright 2019  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=elementary-xfce
+VERSION=${VERSION:-0.15.1}
+BUILD=${BUILD:-1_vtown_1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG $TMP/package-optipng
+mkdir -p $TMP $PKG
+cd $TMP
+
+# First build a local copy of optipng
+rm -rf $(basename $CWD/optipng-*.tar.lz .tar.lz)
+tar xvf $CWD/optipng-*.tar.lz || exit 1
+cd optipng-*
+./configure || exit 1
+make $NUMJOBS -C src/optipng || exit 1
+mkdir $TMP/package-optipng
+cp src/optipng/optipng $TMP/package-optipng || exit 1
+
+# Now build elementary-xfce icon theme
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.lz
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux \
+  || exit 1
+
+sed -i "s,xargs optipng,xargs $TMP/package-optipng/optipng,g" Makefile
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+rm -f $PKG/usr/share/icons/*/{AUTHORS,CONTRIBUTORS,LICENSE}
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS CONTRIBUTORS LICENSE README.md \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/elementary-xfce/slack-desc b/testing/source/vtown/xfce/elementary-xfce/slack-desc
new file mode 100644
index 00000000..db787e61
--- /dev/null
+++ b/testing/source/vtown/xfce/elementary-xfce/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+               |-----handy-ruler------------------------------------------------------|
+elementary-xfce: elementary-xfce (elementary-xfce icon theme)
+elementary-xfce:
+elementary-xfce: Elementary icons forked, extended, and maintained for Xfce.
+elementary-xfce:
+elementary-xfce: Homepage: https://github.com/shimmerproject/elementary-xfce
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
+elementary-xfce:
diff --git a/testing/source/vtown/xfce/exo/exo.SlackBuild b/testing/source/vtown/xfce/exo/exo.SlackBuild
new file mode 100755
index 00000000..6eb401f0
--- /dev/null
+++ b/testing/source/vtown/xfce/exo/exo.SlackBuild
@@ -0,0 +1,149 @@
+#!/bin/bash
+
+# Copyright 2012, 2013, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=exo
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+#find . -exec touch {} \;
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/exo/exo.url b/testing/source/vtown/xfce/exo/exo.url
new file mode 100644
index 00000000..63b021c2
--- /dev/null
+++ b/testing/source/vtown/xfce/exo/exo.url
@@ -0,0 +1 @@
+http://archive.xfce.org:/src/xfce/exo/0.12/exo-0.12.5.tar.bz2
diff --git a/testing/source/vtown/xfce/exo/slack-desc b/testing/source/vtown/xfce/exo/slack-desc
new file mode 100644
index 00000000..285151f5
--- /dev/null
+++ b/testing/source/vtown/xfce/exo/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+exo: exo (libexo extension library)
+exo:
+exo: This is libexo, an extension library to Xfce, developed by
+exo: os-cillation. While Xfce comes with quite a few libraries that are
+exo: targeted at desktop development, libexo is targeted at application
+exo: development. It also has some helper applications that are used
+exo: throughout the entire desktop.
+exo:
+exo: 
+exo:
+exo:
diff --git a/testing/source/vtown/deps/libsass/libsass.SlackBuild b/testing/source/vtown/xfce/garcon/garcon.SlackBuild
index b2564e60..475473d2 100755
--- a/testing/source/vtown/deps/libsass/libsass.SlackBuild
+++ b/testing/source/vtown/xfce/garcon/garcon.SlackBuild
@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Copyright 2019  Eric Hameleers, Eindhoven, NL
-# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2012, 2017, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,19 +22,20 @@
 
 cd $(dirname $0) ; CWD=$(pwd)
 
-PKGNAM=libsass
+PKGNAM=garcon
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1_vtown_1}
+BUILD=${BUILD:-2_vtown_1}
 
 # Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
-    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-    *) ARCH=$(uname -m) ;;
+    *)       export ARCH=$MARCH ;;
   esac
-  export ARCH
 fi
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
@@ -46,23 +46,17 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
-NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
-  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
-elif [ "$ARCH" = "armv7hl" ]; then
-  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
-  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
@@ -86,26 +80,23 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \+
 
-# Configure, build, and install:
 if [ ! -r configure ]; then
-  if [ -x ./autogen.sh ]; then
-    NOCONFIGURE=1 ./autogen.sh
-  else
-    autoreconf -vif
-  fi
+  NOCONFIGURE=1 ./autogen.sh
 fi
+
+# Configure:
 CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
-  --localstatedir=/var \
-  --docdir=/usr/doc/$PKGNAM-$VERSION \
   --mandir=/usr/man \
-  --infodir=/usr/info \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
   --disable-static \
+  --disable-debug \
   --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
@@ -113,14 +104,46 @@ make install DESTDIR=$PKG || exit 1
 rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
 
 # Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
 
-# Add a documentation directory:
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
-  COPYING* LICENSE* *.md \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
diff --git a/testing/source/vtown/xfce/garcon/garcon.url b/testing/source/vtown/xfce/garcon/garcon.url
new file mode 100644
index 00000000..9980ede8
--- /dev/null
+++ b/testing/source/vtown/xfce/garcon/garcon.url
@@ -0,0 +1 @@
+https://github.com/xfce-mirror/garcon/releases
diff --git a/testing/source/vtown/xfce/garcon/slack-desc b/testing/source/vtown/xfce/garcon/slack-desc
new file mode 100644
index 00000000..ddbacd33
--- /dev/null
+++ b/testing/source/vtown/xfce/garcon/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+garcon: garcon (menu implementation for Xfce)
+garcon:
+garcon: This is garcon, a freedesktop.org compliant menu implementation based
+garcon: on GLib and GIO. It was started as a rewrite of the former Xfce menu
+garcon: library called libxfce4menu.
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
diff --git a/testing/source/vtown/xfce/libxfce4ui/libxfce4ui.SlackBuild b/testing/source/vtown/xfce/libxfce4ui/libxfce4ui.SlackBuild
new file mode 100755
index 00000000..09a0c421
--- /dev/null
+++ b/testing/source/vtown/xfce/libxfce4ui/libxfce4ui.SlackBuild
@@ -0,0 +1,152 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libxfce4ui
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-vendor-info=Slackware \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Add vendor info in /usr/share/xfce4/vendorinfo
+mkdir -p $PKG/usr/share/xfce4
+cat $CWD/vendorinfo > $PKG/usr/share/xfce4/vendorinfo
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/libxfce4ui/slack-desc b/testing/source/vtown/xfce/libxfce4ui/slack-desc
new file mode 100644
index 00000000..f24b66bd
--- /dev/null
+++ b/testing/source/vtown/xfce/libxfce4ui/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+libxfce4ui: libxfce4ui (Xfce widget library)
+libxfce4ui:
+libxfce4ui: This is libxfce4ui, the replacement of the old libxfcegui4 library.
+libxfce4ui: It is used to share commonly used Xfce widgets among the Xfce
+libxfce4ui: applications.
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
diff --git a/testing/source/vtown/xfce/libxfce4ui/vendorinfo b/testing/source/vtown/xfce/libxfce4ui/vendorinfo
new file mode 100644
index 00000000..b2818ba1
--- /dev/null
+++ b/testing/source/vtown/xfce/libxfce4ui/vendorinfo
@@ -0,0 +1,7 @@
+The Official Release of Slackware Linux by Patrick Volkerding is an advanced Linux operating system, designed with the twin goals of ease of use and stability as top priorities. Including the latest popular software while retaining a sense of tradition, providing simplicity and ease of use alongside flexibility and power, Slackware brings the best of all worlds to the table.
+
+Originally developed by Linus Torvalds in 1991, the UNIX®-like Linux operating system now benefits from the contributions of millions of users and developers around the world. Slackware Linux provides new and experienced users alike with a fully-featured system, equipped to serve in any capacity from desktop workstation to machine-room server. Web, ftp, and email servers are ready to go out of the box, as are a wide selection of popular desktop environments. A full range of development tools, editors, and current libraries is included for users who wish to develop or compile additional software. 
+
+Since its first beta release in April of 1993, the Slackware Linux Project has aimed at producing the most "UNIX-like" Linux distribution out there. Slackware complies with the published Linux standards, such as the Linux File System Standard. We have always considered simplicity and stability paramount, and as a result Slackware has become one of the most popular, stable, and friendly distributions available. 
+
+See http://slackware.com/ for more information.
diff --git a/testing/source/vtown/xfce/libxfce4util/libxfce4util.SlackBuild b/testing/source/vtown/xfce/libxfce4util/libxfce4util.SlackBuild
new file mode 100755
index 00000000..e33fbaf3
--- /dev/null
+++ b/testing/source/vtown/xfce/libxfce4util/libxfce4util.SlackBuild
@@ -0,0 +1,150 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libxfce4util
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Make sure shared libraries are executable:
+chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/lib*.so.*
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/libxfce4util/slack-desc b/testing/source/vtown/xfce/libxfce4util/slack-desc
new file mode 100644
index 00000000..1b68b2b6
--- /dev/null
+++ b/testing/source/vtown/xfce/libxfce4util/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+libxfce4util: libxfce4util (basic utility library for Xfce)
+libxfce4util:
+libxfce4util: Basic utility library for Xfce. This provides useful functions not
+libxfce4util: relating to the handling of the user interface.
+libxfce4util: 
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
diff --git a/testing/source/vtown/xfce/mousepad/doinst.sh b/testing/source/vtown/xfce/mousepad/doinst.sh
new file mode 100644
index 00000000..6fb12831
--- /dev/null
+++ b/testing/source/vtown/xfce/mousepad/doinst.sh
@@ -0,0 +1,16 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
+if [ -e usr/share/glib-2.0/schemas ]; then
+  if [ -x /usr/bin/glib-compile-schemas ]; then
+    /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas >/dev/null 2>&1
+  fi
+fi
+
diff --git a/testing/source/vtown/deps/sassc/sassc.SlackBuild b/testing/source/vtown/xfce/mousepad/mousepad.SlackBuild
index 5bddb6a4..4d4155fe 100755
--- a/testing/source/vtown/deps/sassc/sassc.SlackBuild
+++ b/testing/source/vtown/xfce/mousepad/mousepad.SlackBuild
@@ -1,6 +1,5 @@
 #!/bin/bash
 
-# Copyright 2019  Eric Hameleers, Eindhoven, NL
 # Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
@@ -23,7 +22,7 @@
 
 cd $(dirname $0) ; CWD=$(pwd)
 
-PKGNAM=sassc
+PKGNAM=mousepad
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1_vtown_1}
 
@@ -46,7 +45,7 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
-NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
@@ -86,14 +85,6 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \+
 
-# Configure, build, and install:
-if [ ! -r configure ]; then
-  if [ -x ./autogen.sh ]; then
-    NOCONFIGURE=1 ./autogen.sh
-  else
-    autoreconf -vif
-  fi
-fi
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
@@ -101,28 +92,32 @@ CXXFLAGS="$SLKCFLAGS" \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
   --localstatedir=/var \
-  --docdir=/usr/doc/$PKGNAM-$VERSION \
   --mandir=/usr/man \
-  --infodir=/usr/info \
-  --disable-static \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-gtk3 \
+  --enable-dbus \
   --build=$ARCH-slackware-linux || exit 1
+#  --disable-schemas-compile \
+
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Don't ship .la files:
-rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
-
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
+# Compress man pages
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
 # Add a documentation directory:
 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
-  LICENSE* Readme* \
+  AUTHORS COPYING* NEWS README THANKS TODO \
   $PKG/usr/doc/${PKGNAM}-$VERSION
 
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
 
 cd $PKG
 /sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/mousepad/mousepad.url b/testing/source/vtown/xfce/mousepad/mousepad.url
new file mode 100644
index 00000000..797da6cc
--- /dev/null
+++ b/testing/source/vtown/xfce/mousepad/mousepad.url
@@ -0,0 +1 @@
+https://archive.xfce.org/src/apps/mousepad/0.4/mousepad-0.4.2.tar.bz2
diff --git a/testing/source/vtown/deps/libsass/slack-desc b/testing/source/vtown/xfce/mousepad/slack-desc
index 04fb9aeb..c4d5db24 100644
--- a/testing/source/vtown/deps/libsass/slack-desc
+++ b/testing/source/vtown/xfce/mousepad/slack-desc
@@ -2,18 +2,18 @@
 # The "handy ruler" below makes it easier to edit a package description.
 # Line up the first '|' above the ':' following the base package name, and
 # the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct. It's also
+# You must make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':' except on otherwise blank lines.
 
        |-----handy-ruler------------------------------------------------------|
-libsass: libsass (Sass library for C/C++)
-libsass:
-libsass: This is a library implementing Sass (a CSS pre-processor) in C/C++.
-libsass: It is used by SassC, which is the official lightweight CLI tool built
-libsass: by the same people as LibSass.
-libsass:
-libsass: Homepage: https://libsass.org
-libsass:
-libsass:
-libsass:
-libsass:
+mousepad: mousepad (simple text editor)
+mousepad:
+mousepad: Mousepad is a simple, fast and easy-to-use text editor
+mousepad: for the Xfce desktop environment, based on the Leafpad text editor.
+mousepad: 
+mousepad: Mousepad includes complete support for UTF-8 text,
+mousepad: the usual cut/copy/paste functionality, font selection support, etc.
+mousepad:
+mousepad: Homepage: https://gitlab.xfce.org/apps/mousepad/
+mosuepad:
+mousepad:
diff --git a/testing/source/vtown/xfce/thunar-volman/slack-desc b/testing/source/vtown/xfce/thunar-volman/slack-desc
new file mode 100644
index 00000000..4cfee665
--- /dev/null
+++ b/testing/source/vtown/xfce/thunar-volman/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+thunar-volman: thunar-volman (Thunar Volume Manager Plugin)
+thunar-volman:
+thunar-volman: thunar-volman is an extension for the Thunar File Manager, which
+thunar-volman: enables automatic management of removable drives and media. 
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
+thunar-volman:
diff --git a/testing/source/vtown/xfce/thunar-volman/thunar-volman.SlackBuild b/testing/source/vtown/xfce/thunar-volman/thunar-volman.SlackBuild
new file mode 100755
index 00000000..4abb5084
--- /dev/null
+++ b/testing/source/vtown/xfce/thunar-volman/thunar-volman.SlackBuild
@@ -0,0 +1,111 @@
+#!/bin/bash
+
+# Slackware build script for thunar-volman
+
+# Copyright 2007-2018  Robby Workman, Tuscaloosa, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=thunar-volman
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_vtown_1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/vtown/xfce/thunar/slack-desc b/testing/source/vtown/xfce/thunar/slack-desc
new file mode 100644
index 00000000..3adf42a3
--- /dev/null
+++ b/testing/source/vtown/xfce/thunar/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+thunar: thunar (file manager)
+thunar:
+thunar: Thunar is a modern file manager for the Xfce Desktop Environment.
+thunar: Thunar has been designed from the ground up to be fast and
+thunar: easy-to-use. Its user interface is clean and intuitive, and does not
+thunar: include any confusing or useless options. Thunar is fast and
+thunar: responsive with a good start up time and directory load time.
+thunar:
+thunar: Homepage: http://thunar.xfce.org
+thunar:
+thunar:
diff --git a/testing/source/vtown/xfce/thunar/thunar.SlackBuild b/testing/source/vtown/xfce/thunar/thunar.SlackBuild
new file mode 100755
index 00000000..be6ec707
--- /dev/null
+++ b/testing/source/vtown/xfce/thunar/thunar.SlackBuild
@@ -0,0 +1,149 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=thunar
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+find . -exec touch {} \+
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \+
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/thunar/thunar.url b/testing/source/vtown/xfce/thunar/thunar.url
new file mode 100644
index 00000000..4cc136db
--- /dev/null
+++ b/testing/source/vtown/xfce/thunar/thunar.url
@@ -0,0 +1 @@
+https://archive.xfce.org/src/xfce/thunar/1.8/thunar-1.8.13.tar.bz2
diff --git a/testing/source/vtown/xfce/tumbler/slack-desc b/testing/source/vtown/xfce/tumbler/slack-desc
new file mode 100644
index 00000000..89d74bd7
--- /dev/null
+++ b/testing/source/vtown/xfce/tumbler/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+tumbler: tumbler (thumbnail generator)
+tumbler:
+tumbler: Tumbler is a D-Bus service for applications to request thumbnails
+tumbler: for various URI schemes and MIME types. It is written in an object-
+tumbler: oriented fashion using GLib and GObject. It provides plugin
+tumbler: interfaces for extending the URI schemes and MIME types for which
+tumbler: thumbnails can be generated as well as for replacing the storage
+tumbler: backend that is used to store the thumbnails on disk. 
+tumbler:
+tumbler:
+tumbler:
diff --git a/testing/source/vtown/xfce/tumbler/tumbler.SlackBuild b/testing/source/vtown/xfce/tumbler/tumbler.SlackBuild
new file mode 100755
index 00000000..7153eabe
--- /dev/null
+++ b/testing/source/vtown/xfce/tumbler/tumbler.SlackBuild
@@ -0,0 +1,151 @@
+#!/bin/bash
+
+# Copyright 2012, 2013, 2015, 2017, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=tumbler
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || cd $PKGNAM-$PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+if [ ! -x configure ]; then
+  ./autogen.sh
+fi
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/tumbler/tumbler.url b/testing/source/vtown/xfce/tumbler/tumbler.url
new file mode 100644
index 00000000..8cc2fe2b
--- /dev/null
+++ b/testing/source/vtown/xfce/tumbler/tumbler.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/tumbler/0.2/tumbler-0.2.3.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-appfinder/slack-desc b/testing/source/vtown/xfce/xfce4-appfinder/slack-desc
new file mode 100644
index 00000000..8801d8c7
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-appfinder/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+xfce4-appfinder: xfce4-appfinder (Application finder)
+xfce4-appfinder:
+xfce4-appfinder: The Xfce application finder is a tool to find and launch installed
+xfce4-appfinder: applications on your system and execute commands. It can also be used
+xfce4-appfinder: to quickly add launchers to the Xfce Panel by dragging an item from
+xfce4-appfinder: the view and dropping it on the panel.
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
diff --git a/testing/source/vtown/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild b/testing/source/vtown/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
new file mode 100755
index 00000000..63f6ab21
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-appfinder
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-clipman-plugin/doinst.sh b/testing/source/vtown/xfce/xfce4-clipman-plugin/doinst.sh
new file mode 100644
index 00000000..1f8ff67d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-clipman-plugin/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/testing/source/vtown/xfce/xfce4-clipman-plugin/slack-desc b/testing/source/vtown/xfce/xfce4-clipman-plugin/slack-desc
new file mode 100644
index 00000000..736905dd
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-clipman-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-clipman-plugin: xfce4-clipman-plugin (clipman plugin for the Xfce panel)
+xfce4-clipman-plugin:
+xfce4-clipman-plugin: Clipman allows you to keep several clipboard selections in memory
+xfce4-clipman-plugin: which you can then use to toggle. It can pull the clips from both
+xfce4-clipman-plugin: the selection and the copy buffer, restore your clipboard on login,
+xfce4-clipman-plugin: and prevent an empty clipboard.
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
diff --git a/testing/source/vtown/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild b/testing/source/vtown/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
new file mode 100755
index 00000000..21c3ff35
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
@@ -0,0 +1,117 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-clipman-plugin
+
+# Copyright 2006-2012  Robby Workman  Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+#  Redistributions of this script must retain the above copyright
+#  notice, this list of conditions, and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-clipman-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url b/testing/source/vtown/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
new file mode 100644
index 00000000..5247654d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-clipman-plugin/1.4/xfce4-clipman-plugin-1.4.3.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-dev-tools/slack-desc b/testing/source/vtown/xfce/xfce4-dev-tools/slack-desc
new file mode 100644
index 00000000..0e89e3b5
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-dev-tools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+xfce4-dev-tools: xfce4-dev-tools (Xfce development tools)
+xfce4-dev-tools:
+xfce4-dev-tools: The Xfce development tools are a collection of tools and macros for
+xfce4-dev-tools: Xfce developers and people that want to build Xfce from Git.
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
diff --git a/testing/source/vtown/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild b/testing/source/vtown/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
new file mode 100755
index 00000000..8a336e87
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-dev-tools
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-notifyd/doinst.sh b/testing/source/vtown/xfce/xfce4-notifyd/doinst.sh
new file mode 100644
index 00000000..ec1b3d8a
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-notifyd/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications 2>/dev/null
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/testing/source/vtown/xfce/xfce4-notifyd/slack-desc b/testing/source/vtown/xfce/xfce4-notifyd/slack-desc
new file mode 100644
index 00000000..b826a466
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-notifyd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-notifyd: xfce4-notifyd (Xfce Notify Daemon)
+xfce4-notifyd:
+xfce4-notifyd: Xfce4-notifyd is a simple, visually-appealing notification daemon
+xfce4-notifyd: for Xfce. Applications can use xfce4-notifyd to pop up a notification
+xfce4-notifyd: bubble by sending messages through D-Bus.
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
diff --git a/testing/source/vtown/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild b/testing/source/vtown/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
new file mode 100755
index 00000000..a84c8cfb
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
@@ -0,0 +1,129 @@
+#!/bin/bash
+
+# Slackware build script for Xfce4-notifyd
+
+# Copyright 2008  Frank Caraballo <fecaraballo{at}gmail{dot}com>
+# Copyright 2010, 2018, 2020  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-notifyd
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install-strip DESTDIR=$PKG || exit 1
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/vtown/xfce/xfce4-notifyd/xfce4-notifyd.url b/testing/source/vtown/xfce/xfce4-notifyd/xfce4-notifyd.url
new file mode 100644
index 00000000..ac57908d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-notifyd/xfce4-notifyd.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-notifyd/0.4/xfce4-notifyd-0.4.4.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-panel-profiles/doinst.sh b/testing/source/vtown/xfce/xfce4-panel-profiles/doinst.sh
new file mode 100644
index 00000000..4e8ba707
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-panel-profiles/doinst.sh
@@ -0,0 +1,4 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/testing/source/vtown/xfce/xfce4-panel-profiles/slack-desc b/testing/source/vtown/xfce/xfce4-panel-profiles/slack-desc
new file mode 100644
index 00000000..15d98b28
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-panel-profiles/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-panel-profiles: xfce4-panel-profiles (simple app to manage Xfce panel layouts)
+xfce4-panel-profiles:
+xfce4-panel-profiles: xfce4-panel-profiles (formerly known as xfpanel-switch) is a simple 
+xfce4-panel-profiles: application to manage Xfce panel layouts.
+xfce4-panel-profiles:
+xfce4-panel-profiles: With the modular Xfce Panel, a multitude of panel layouts can be 
+xfce4-panel-profiles: created. This tool makes it possible to backup, restore, import, 
+xfce4-panel-profiles: and export these panel layouts.
+xfce4-panel-profiles:
+xfce4-panel-profiles: Homepage: https://git.xfce.org/apps/xfce4-panel-profiles
+xfce4-panel-profiles:
diff --git a/testing/source/vtown/xfce/xfce4-panel-profiles/xfce4-panel-profiles.SlackBuild b/testing/source/vtown/xfce/xfce4-panel-profiles/xfce4-panel-profiles.SlackBuild
new file mode 100755
index 00000000..e33f2e34
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-panel-profiles/xfce4-panel-profiles.SlackBuild
@@ -0,0 +1,124 @@
+#!/bin/bash
+
+# Copyright 2019, 2020  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-panel-profiles
+VERSION=${VERSION:-$(echo xfce4-panel-profiles-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-xfce4-panel-profiles
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+cd $TMP
+rm -rf xfce4-panel-profiles-$VERSION
+tar xvf $CWD/xfce4-panel-profiles-$VERSION.tar.?z* || exit 1
+cd xfce4-panel-profiles-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure --prefix=/usr --python=python3 || exit 1
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+rm -rf $PKG/usr/share/doc
+mkdir -p $PKG/usr/doc/xfce4-panel-profiles-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+  $PKG/usr/doc/xfce4-panel-profiles-$VERSION
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n --prepend $TMP/xfce4-panel-profiles-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/vtown/xfce/xfce4-panel/libxfce4panel.max_blinking_count.8.diff b/testing/source/vtown/xfce/xfce4-panel/libxfce4panel.max_blinking_count.8.diff
new file mode 100644
index 00000000..3a2df675
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-panel/libxfce4panel.max_blinking_count.8.diff
@@ -0,0 +1,12 @@
+--- libxfce4panel/xfce-arrow-button.c.old	2013-05-05 17:47:07.000000000 +0200
++++ libxfce4panel/xfce-arrow-button.c	2013-09-17 10:09:51.162754511 +0200
+@@ -52,7 +52,7 @@
+ 
+ 
+ #define ARROW_WIDTH        (8)
+-#define MAX_BLINKING_COUNT (G_MAXUINT)
++#define MAX_BLINKING_COUNT (8)
+ 
+ enum
+ {
+
diff --git a/testing/source/vtown/xfce/xfce4-panel/slack-desc b/testing/source/vtown/xfce/xfce4-panel/slack-desc
new file mode 100644
index 00000000..78472956
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-panel/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+xfce4-panel: xfce4-panel (panel for Xfce)
+xfce4-panel:
+xfce4-panel: The Xfce panel is part of the Xfce Desktop Environment and features
+xfce4-panel: program launchers, panel menus, a clock, a desktop switcher, and more.
+xfce4-panel: Many aspects of the panel can be configured through graphical dialogs,
+xfce4-panel: but also by GTK+ style properties and Xfconf settings.
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
diff --git a/testing/source/vtown/xfce/xfce4-panel/xfce4-panel.SlackBuild b/testing/source/vtown/xfce/xfce4-panel/xfce4-panel.SlackBuild
new file mode 100755
index 00000000..3c78c996
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-panel/xfce4-panel.SlackBuild
@@ -0,0 +1,150 @@
+#!/bin/bash
+
+# Copyright 2012, 2016, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-panel
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+# Blink to notify 4 times (4 on, 4 off), not G_MAXUINT times:
+zcat $CWD/libxfce4panel.max_blinking_count.8.diff.gz | patch -p0 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-power-manager/doinst.sh b/testing/source/vtown/xfce/xfce4-power-manager/doinst.sh
new file mode 100644
index 00000000..1f8ff67d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-power-manager/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/testing/source/vtown/xfce/xfce4-power-manager/slack-desc b/testing/source/vtown/xfce/xfce4-power-manager/slack-desc
new file mode 100644
index 00000000..0d33da79
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-power-manager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------------|
+xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce)
+xfce4-power-manager:
+xfce4-power-manager: xfce4-power-manager makes power management functions (such as suspend
+xfce4-power-manager: and hibernate) easy inside the Xfce Desktop Environment.
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
diff --git a/testing/source/vtown/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild b/testing/source/vtown/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
new file mode 100755
index 00000000..ead6ea0a
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
@@ -0,0 +1,133 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-power-manager
+
+# Copyright 2006-2012  Robby Workman  Northport, Alabama, USA
+# Copyright 2009, 2010, 2016, 2018, 2020  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-power-manager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --disable-network-manager \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/html
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/slack-desc b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/slack-desc
new file mode 100644
index 00000000..020d8f62
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                       |-----handy-ruler------------------------------------------------------|
+xfce4-pulseaudio-plugin: xfce4-pulseaudio-plugin (PulseAudio plugin for Xfce panel)
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin: xfce4-pulseaudio-plugin is a plugin for the Xfce panel which provides
+xfce4-pulseaudio-plugin: a convenient way to adjust the audio volume of the PulseAudio sound
+xfce4-pulseaudio-plugin: system and to an auto mixer tool like pavucontrol. It can optionally
+xfce4-pulseaudio-plugin: handle multimedia keys for controlling the audio volume.
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
+xfce4-pulseaudio-plugin:
diff --git a/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme.patch b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme.patch
new file mode 100644
index 00000000..717cfbe1
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme.patch
@@ -0,0 +1,12 @@
+diff -U3 -d -r -N xfce4-pulseaudio-plugin-0.2.4/panel-plugin/pulseaudio-button.c xfce4-pulseaudio-plugin-0.2.4.fixed/panel-plugin/pulseaudio-button.c
+--- xfce4-pulseaudio-plugin-0.2.4/panel-plugin/pulseaudio-button.c	2015-06-06 23:57:55.000000000 +0200
++++ xfce4-pulseaudio-plugin-0.2.4.fixed/panel-plugin/pulseaudio-button.c	2016-06-22 21:51:07.258482863 +0200
+@@ -137,7 +137,7 @@
+ 
+   /* Setup Gtk style */
+   css_provider = gtk_css_provider_new ();
+-  gtk_css_provider_load_from_data (css_provider, "#pulseaudio-button { -GtkWidget-focus-padding: 0; -GtkWidget-focus-line-width: 0; -GtkButton-default-border: 0; -GtkButton-inner-border: 0; padding: 1px; border-width: 1px;}", -1, NULL);
++  gtk_css_provider_load_from_data (css_provider, "#pulseaudio-button { -GtkWidget-focus-padding: 0; -GtkWidget-focus-line-width: 0; -GtkButton-default-border: 0; -GtkButton-inner-border: 0; padding: 1px; border-width: 0px; border-radius: 0px; background-color:@theme_bg_color;}", -1, NULL);
+   gtk_style_context_add_provider (GTK_STYLE_CONTEXT (gtk_widget_get_style_context (GTK_WIDGET (button))), GTK_STYLE_PROVIDER (css_provider), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION);
+ 
+   /* Intercept scroll events */
diff --git a/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme_clean.patch b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme_clean.patch
new file mode 100644
index 00000000..5f9358b4
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme_clean.patch
@@ -0,0 +1,12 @@
+diff -U3 -d -r -N xfce4-pulseaudio-plugin-0.2.4/panel-plugin/pulseaudio-button.c xfce4-pulseaudio-plugin-0.2.4.fixed/panel-plugin/pulseaudio-button.c
+--- xfce4-pulseaudio-plugin-0.2.4/panel-plugin/pulseaudio-button.c	2015-06-06 23:57:55.000000000 +0200
++++ xfce4-pulseaudio-plugin-0.2.4.fixed/panel-plugin/pulseaudio-button.c	2016-06-22 21:51:07.258482863 +0200
+@@ -137,7 +137,7 @@
+ 
+   /* Setup Gtk style */
+   css_provider = gtk_css_provider_new ();
+-  gtk_css_provider_load_from_data (css_provider, "#pulseaudio-button { -GtkWidget-focus-padding: 0; -GtkWidget-focus-line-width: 0; -GtkButton-default-border: 0; -GtkButton-inner-border: 0; padding: 1px; border-width: 1px;}", -1, NULL);
++  gtk_css_provider_load_from_data (css_provider, "#pulseaudio-button { -GtkWidget-focus-padding: 0; -GtkWidget-focus-line-width: 0; -GtkButton-default-border: 0; -GtkButton-inner-border: 0; padding: 0px; border-width: 5px; border-radius: 13px; color:@theme_fg_color;}", -1, NULL);
+   gtk_style_context_add_provider (GTK_STYLE_CONTEXT (gtk_widget_get_style_context (GTK_WIDGET (button))), GTK_STYLE_PROVIDER (css_provider), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION);
+ 
+   /* Intercept scroll events */
diff --git a/testing/source/vtown/deps/upower/upower.SlackBuild b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin.SlackBuild
index ddd7e218..66eb3fa8 100755
--- a/testing/source/vtown/deps/upower/upower.SlackBuild
+++ b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin.SlackBuild
@@ -1,8 +1,8 @@
 #!/bin/bash
 
-# Slackware build script for upower
+# Slackware build script for xfce4-pulseaudio-plugin
 
-# Copyright 2010, 2011, 2015  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2015  Robby Workman, Tuscaloosa, Alabama, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -22,25 +22,17 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
-
 cd $(dirname $0) ; CWD=$(pwd)
 
-PKGNAM=upower
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
+PKGNAM=xfce4-pulseaudio-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 BUILD=${BUILD:-1_vtown_1}
 
-NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
-
-# Automatically determine the architecture we're building on:
-MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
-    armv7hl) export ARCH=$MARCH ;;
-    arm*)    export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-    *)       export ARCH=$MARCH ;;
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
   esac
 fi
 
@@ -52,6 +44,11 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -61,22 +58,11 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
-elif [ "$ARCH" = "armv7hl" ]; then
-  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
-  LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
-case "$ARCH" in
-    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
-    *)    TARGET=$ARCH-slackware-linux ;;
-esac
-
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
 rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
@@ -86,51 +72,62 @@ cd $PKGNAM-$VERSION || exit 1
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
+ -exec chmod 755 {} \+ -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
+ -exec chmod 644 {} \+
+
+# These are proposed patches to fix the background color of the plugin icon.
+# However, both of them have some issues with artifacts or with changing the
+# dimensions of the icon in unpleasant ways.  Supposedly the correct way to
+# fix the issue is in the theme css, but since it's an issue with GTK+2 and
+# GTK+3 not getting along, few theme maintainers can be bothered with this
+# since GNOME has moved on to GTK+3.
+#
+# If you want to try them, apply one or the other.  Unless the theme you're using
+# supports both GTK+2 and GTK+3 it's not likely to help, though.
+
+# Patch one (thanks to DarkVision):
+#zcat ${CWD}/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme.patch.gz | patch -p1 --verbose || exit 1
 
-zcat $CWD/patches/0002-linux-Fix-memory-leak-in-Bluez-backend.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/0003-linux-Fix-warning-when-bluez-Appearance-property-isn.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/0006-lib-Add-Pen-device-type.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/0007-linux-Detect-Bluetooth-pens.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/0008-linux-Identify-keyboard-pointing-device-combos-as-ke.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/0011-linux-Add-support-for-iPhone-XR-XS-models.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/patches/0012-build-Use-a-newer-libplist-if-available.patch.gz | patch -p1 --verbose || exit 1
+# Patch two (thanks to Jean-Philippe Guillemin):
+#zcat ${CWD}/xfce4-pulseaudio-plugin-0.2.4-gtk3_theme_clean.patch.gz | patch -p1 --verbose || exit 1
 
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
+  --sysconfdir=/etc/xfce \
   --localstatedir=/var \
   --mandir=/usr/man \
   --docdir=/usr/doc/$PKGNAM-$VERSION \
-  --disable-static \
-  --enable-man-pages \
-  --build=$TARGET || exit 1
+  --disable-debug \
+  --enable-libnotify \
+  --enable-keybinder \
+  --with-mixer-command=pavucontrol \
+  --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Don't ship .la files:
-rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
-
 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
-# Don't clobber the config file on upgrades
-mv $PKG/etc/UPower/UPower.conf $PKG/etc/UPower/UPower.conf.new
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+gzip -9 $PKG/usr/man/man?/*.?
 
 mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
 cp -a \
-  AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \
+  AUTHORS COPYING* NEWS README* THANKS \
   $PKG/usr/doc/$PKGNAM-$VERSION
 
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
diff --git a/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin.url b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin.url
new file mode 100644
index 00000000..4376b0a5
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-pulseaudio-plugin/xfce4-pulseaudio-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-pulseaudio-plugin/0.4/xfce4-pulseaudio-plugin-0.4.0.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-screensaver/0001-Catch-gs_listener_dbus_init-failures.patch b/testing/source/vtown/xfce/xfce4-screensaver/0001-Catch-gs_listener_dbus_init-failures.patch
new file mode 100644
index 00000000..8db50475
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screensaver/0001-Catch-gs_listener_dbus_init-failures.patch
@@ -0,0 +1,33 @@
+From f596f888a2b6e6598b9d0e4f0200b60e7f9eef64 Mon Sep 17 00:00:00 2001
+From: Shawn Anastasio <shawn@anastas.io>
+Date: Sun, 6 Sep 2020 19:33:12 +0000
+Subject: [PATCH] Catch gs_listener_dbus_init failures
+
+In cases where the dbus connection fails, gs_listener_dbus_init
+will fail and return FALSE. Previously, this status code was not
+checked in the gs_listener constructor, resulting in a silent failure
+that eventually resulted in a Segmentation Fault when the listener's
+system_connection pointer gets used.
+
+Add a g_assert to ensure gs_listener_dbus_init succeeds, or bail out
+gracefully on failures.
+---
+ src/gs-listener-dbus.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/gs-listener-dbus.c b/src/gs-listener-dbus.c
+index 6307324..7aebe00 100644
+--- a/src/gs-listener-dbus.c
++++ b/src/gs-listener-dbus.c
+@@ -2196,7 +2196,7 @@ gs_listener_init (GSListener *listener) {
+ #endif
+     listener->priv->prefs = gs_prefs_new();
+ 
+-    gs_listener_dbus_init (listener);
++    g_assert (gs_listener_dbus_init (listener));
+ 
+     init_session_id (listener);
+ 
+-- 
+2.29.2
+
diff --git a/testing/source/vtown/xfce/xfce4-screensaver/slack-desc b/testing/source/vtown/xfce/xfce4-screensaver/slack-desc
new file mode 100644
index 00000000..4c5817e7
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screensaver/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+xfce4-screensaver: xfce4-screensaver (screen saver and locker for Xfce)
+xfce4-screensaver:
+xfce4-screensaver: xfce4-screensaver is a screen saver and locker that aims to have
+xfce4-screensaver: simple, sane, secure defaults and be well integrated with the desktop.
+xfce4-screensaver:
+xfce4-screensaver: This project is a port of MATE Screensaver. It has been tightly 
+xfce4-screensaver: integrated with the Xfce desktop, utilizing Xfce libraries and the 
+xfce4-screensaver: Xfconf configuration backend.
+xfce4-screensaver:
+xfce4-screensaver:
+xfce4-screensaver:
diff --git a/testing/source/vtown/xfce/xfce4-screensaver/xfce4-screensaver.SlackBuild b/testing/source/vtown/xfce/xfce4-screensaver/xfce4-screensaver.SlackBuild
new file mode 100755
index 00000000..62966e6d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screensaver/xfce4-screensaver.SlackBuild
@@ -0,0 +1,147 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-screensaver
+
+# Copyright 2019  Robby Workman, Tuscaloosa, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-screensaver
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+# Revert this one: https://gitlab.xfce.org/apps/xfce4-screensaver/-/issues/66
+zcat $CWD/0001-Catch-gs_listener_dbus_init-failures.patch.gz | patch -p1 -R || exit 1
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --enable-pam \
+  --with-mit-ext \
+  --enable-locking \
+  --build=$ARCH-slackware-linux || exit 1
+
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+if [ -d $PKG/usr/share/doc/xfce4-screensaver ]; then # --docdir was ignored
+  mv $PKG/usr/share/doc/xfce4-screensaver/* $PKG/usr/doc/$PKGNAM-$VERSION
+  ( cd $PKG/usr/share ; rmdir -p doc/xfce4-screensaver )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-screenshooter/doinst.sh b/testing/source/vtown/xfce/xfce4-screenshooter/doinst.sh
new file mode 100644
index 00000000..1f8ff67d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screenshooter/doinst.sh
@@ -0,0 +1,10 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
diff --git a/testing/source/vtown/xfce/xfce4-screenshooter/slack-desc b/testing/source/vtown/xfce/xfce4-screenshooter/slack-desc
new file mode 100644
index 00000000..5f010314
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screenshooter/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------------|
+xfce4-screenshooter: xfce4-screenshooter (screenshooter plugin for Xfce)
+xfce4-screenshooter:
+xfce4-screenshooter: The screenshooter plugin adds a panel button that allows you to take
+xfce4-screenshooter: screenshots.
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
diff --git a/testing/source/vtown/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild b/testing/source/vtown/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
new file mode 100755
index 00000000..82ee21dd
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
@@ -0,0 +1,139 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-screenshooter
+
+# Copyright 2006-2015  Robby Workman, Tuscaloosa, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-screenshooter
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+if [ -d $PKG/usr/share/doc/xfce4-screenshooter ]; then # --docdir was ignored
+  mv $PKG/usr/share/doc/xfce4-screenshooter/* $PKG/usr/doc/$PKGNAM-$VERSION
+  ( cd $PKG/usr/share ; rmdir -p doc/xfce4-screenshooter )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-screenshooter/xfce4-screenshooter.url b/testing/source/vtown/xfce/xfce4-screenshooter/xfce4-screenshooter.url
new file mode 100644
index 00000000..4ac1f3ab
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-screenshooter/xfce4-screenshooter.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-screenshooter/1.9/xfce4-screenshooter-1.9.3.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-session/slack-desc b/testing/source/vtown/xfce/xfce4-session/slack-desc
new file mode 100644
index 00000000..21f856f7
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-session/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-session: xfce4-session (Xfce session manager)
+xfce4-session:
+xfce4-session: Xfce4-session is a session manager for Xfce. Its task is to save the
+xfce4-session: state of your desktop (opened applications and their location) and
+xfce4-session: restore it during a next startup. You can create several different
+xfce4-session: sessions and choose one of them on startup.
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
diff --git a/testing/source/vtown/xfce/xfce4-session/xfce4-session.SlackBuild b/testing/source/vtown/xfce/xfce4-session/xfce4-session.SlackBuild
new file mode 100755
index 00000000..6a6cf0fa
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-session/xfce4-session.SlackBuild
@@ -0,0 +1,147 @@
+#!/bin/bash
+
+# Copyright 2012, 2013, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-session
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-settings/slack-desc b/testing/source/vtown/xfce/xfce4-settings/slack-desc
new file mode 100644
index 00000000..3774be25
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-settings/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xfce4-settings: xfce4-settings (Xfce settings manager)
+xfce4-settings:
+xfce4-settings: xfce4-settings is the Xfce settings manager front-end. It comes with
+xfce4-settings: several different components for configuring application-independent
+xfce4-settings: settings inside xfconf.
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
diff --git a/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.SlackBuild b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.SlackBuild
new file mode 100755
index 00000000..990b2383
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.SlackBuild
@@ -0,0 +1,151 @@
+#!/bin/bash
+
+# Copyright 2012, 2016, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-settings
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Set Greybird (GTK theme) and elementary-xfce (icon theme) as system defaults
+zcat $CWD/xfce4-settings.theme.diff.gz | patch -p1 --verbose || exit 1
+
+zcat $CWD/xfce4-settings.xft.defaults.diff.gz | patch -p1 --verbose || exit 1
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-pluggable-dialogs \
+  --enable-sound-settings \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.theme.diff b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.theme.diff
new file mode 100644
index 00000000..89888784
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.theme.diff
@@ -0,0 +1,14 @@
+diff -Nur xfce4-settings-4.11.4.orig/xfsettingsd/xsettings.xml xfce4-settings-4.11.4/xfsettingsd/xsettings.xml
+--- xfce4-settings-4.11.4.orig/xfsettingsd/xsettings.xml	2015-02-16 15:03:11.000000000 -0600
++++ xfce4-settings-4.11.4/xfsettingsd/xsettings.xml	2015-02-17 21:01:05.021259913 -0600
+@@ -6,8 +6,8 @@
+ <?xml version="1.0" encoding="UTF-8"?>
+ <channel name="xsettings" version="1.0">
+   <property name="Net" type="empty">
+-    <property name="ThemeName" type="empty"/>
+-    <property name="IconThemeName" type="empty"/>
++    <property name="ThemeName" type="string" value="Greybird"/>
++    <property name="IconThemeName" type="string" value="elementary-xfce-dark"/>
+     <property name="DoubleClickTime" type="int" value="400"/>
+     <property name="DoubleClickDistance" type="int" value="5"/>
+     <property name="DndDragThreshold" type="int" value="8"/>
diff --git a/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.url b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.url
new file mode 100644
index 00000000..317e2181
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/xfce/xfce4-settings/4.12/xfce4-settings-4.12.4.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff
new file mode 100644
index 00000000..333b615d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff
@@ -0,0 +1,23 @@
+--- ./xfsettingsd/xsettings.xml.orig	2012-04-28 15:48:30.000000000 -0500
++++ ./xfsettingsd/xsettings.xml	2012-07-19 14:32:25.554643922 -0500
+@@ -17,14 +17,19 @@
+     <property name="EnableEventSounds" type="bool" value="false"/>
+     <property name="EnableInputFeedbackSounds" type="bool" value="false"/>
+   </property>
++<!--
++  Commented out.  We should not modify the system text rendering defaults.
++  At least not by default.  :-)
++  Feel free to uncomment this block and modify it to suit your own needs.
+   <property name="Xft" type="empty">
+     <property name="DPI" type="empty"/>
+     <property name="Antialias" type="int" value="-1"/>
+     <property name="Hinting" type="int" value="-1"/>
+     <property name="HintStyle" type="string" value="hintnone"/>
+     <property name="RGBA" type="string" value="none"/>
+-    <!-- <property name="Lcdfilter" type="string" value="none"/> -->
++    <property name="Lcdfilter" type="string" value="none"/>
+   </property>
++-->
+   <property name="Gtk" type="empty">
+     <property name="CanChangeAccels" type="bool" value="false"/>
+     <property name="ColorPalette" type="string" value="black:white:gray50:red:purple:blue:light blue:green:yellow:orange:lavender:brown:goldenrod4:dodger blue:pink:light green:gray10:gray30:gray75:gray90"/>
diff --git a/testing/source/vtown/xfce/xfce4-systemload-plugin/slack-desc b/testing/source/vtown/xfce/xfce4-systemload-plugin/slack-desc
new file mode 100644
index 00000000..1f57f400
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-systemload-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                       |-----handy-ruler------------------------------------------------------|
+xfce4-systemload-plugin: xfce4-systemload-plugin (systemload plugin for the Xfce panel)
+xfce4-systemload-plugin:
+xfce4-systemload-plugin: This plugin displays the current system load on the Xfce panel.
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
diff --git a/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.HOVER_TIMEOUT.diff b/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.HOVER_TIMEOUT.diff
new file mode 100644
index 00000000..648cb202
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.HOVER_TIMEOUT.diff
@@ -0,0 +1,51 @@
+--- ./panel-plugin/systemload.c.orig	2018-11-29 10:44:33.000000000 -0600
++++ ./panel-plugin/systemload.c	2018-12-02 13:22:54.163384487 -0600
+@@ -55,6 +55,8 @@
+ static gchar *DEFAULT_COLOR[] = { "#0000c0", "#00c000", "#f0f000" };
+ static gchar *DEFAULT_COMMAND_TEXT = "xfce4-taskmanager";
+ 
++/* HOVER_TIMEOUT is a fixed constant in gtk+-3; this must match - Aargh */
++#define HOVER_TIMEOUT 500
+ #define UPDATE_TIMEOUT 500
+ #define UPDATE_TIMEOUT_SECONDS 1
+ 
+@@ -106,6 +108,7 @@
+     guint             timeout, timeout_seconds;
+     gboolean          use_timeout_seconds;
+     guint             timeout_id;
++    guint	      tooltip_timeout;
+     t_command         command;
+     t_monitor         *monitor[3];
+     t_uptime_monitor  *uptime;
+@@ -173,6 +176,9 @@
+                  global->monitor[count]->value_read / 100.0);
+         }
+     }
++/* don't write tooltip too often */
++    if((global->tooltip_timeout += global->timeout) <= HOVER_TIMEOUT) return TRUE;
++    global->tooltip_timeout = 0;
+     if (global->monitor[0]->options.enabled)
+     {
+         g_snprintf(caption, sizeof(caption), _("System Load: %ld%%"),
+@@ -335,6 +341,7 @@
+ #endif
+     global->plugin = plugin;
+     global->timeout = UPDATE_TIMEOUT;
++    global->tooltip_timeout = 0;
+     global->timeout_seconds = UPDATE_TIMEOUT_SECONDS;
+     global->use_timeout_seconds = TRUE;
+     global->timeout_id = 0;
+@@ -422,13 +429,6 @@
+     }
+ #endif
+     global->timeout_id = g_timeout_add(global->timeout, (GSourceFunc)update_monitors, global);
+-    /* reduce the default tooltip timeout to be smaller than the update interval otherwise
+-     * we won't see tooltips on GTK 2.16 or newer */
+-    settings = gtk_settings_get_default();
+-    if (g_object_class_find_property(G_OBJECT_GET_CLASS(settings), "gtk-tooltip-timeout"))
+-        g_object_set(settings, "gtk-tooltip-timeout",
+-                     global->timeout - 10, NULL);
+-
+ }
+ 
+ static void
diff --git a/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild b/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
new file mode 100755
index 00000000..45595926
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
@@ -0,0 +1,117 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-systemload-plugin
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Maintained by Ozan Turkyilmaz ozan.turkyilmaz@gmail.com
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-systemload-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_vtown_1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.lz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+zcat $CWD/xfce4-systemload-plugin.HOVER_TIMEOUT.diff.gz | patch -p1 --verbose || exit 1
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url b/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
new file mode 100644
index 00000000..17d17c5a
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-systemload-plugin/
diff --git a/testing/source/vtown/xfce/xfce4-taskmanager/doinst.sh b/testing/source/vtown/xfce/xfce4-taskmanager/doinst.sh
new file mode 100644
index 00000000..4e8ba707
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-taskmanager/doinst.sh
@@ -0,0 +1,4 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
diff --git a/testing/source/vtown/xfce/xfce4-taskmanager/slack-desc b/testing/source/vtown/xfce/xfce4-taskmanager/slack-desc
new file mode 100644
index 00000000..a47e8f53
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-taskmanager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+xfce4-taskmanager: xfce4-taskmanager (running apps / task manager application)
+xfce4-taskmanager:
+xfce4-taskmanager: xfce4-taskmanager shows a list of running apps (similar to the
+xfce4-taskmanager: task manager included with some other operating systems)  :)
+xfce4-taskmanager:
+xfce4-taskmanager: The taskmanager is started by running the command 'xfce4-taskmanager'
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
diff --git a/testing/source/vtown/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild b/testing/source/vtown/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
new file mode 100755
index 00000000..c28e7e74
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
@@ -0,0 +1,114 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-taskmanager
+
+# Copyright 2006-2014  Robby Workman, Tuscaloosa, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-taskmanager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-taskmanager/xfce4-taskmanager.url b/testing/source/vtown/xfce/xfce4-taskmanager/xfce4-taskmanager.url
new file mode 100644
index 00000000..7cefa665
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-taskmanager/xfce4-taskmanager.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-taskmanager
diff --git a/testing/source/vtown/xfce/xfce4-terminal/slack-desc b/testing/source/vtown/xfce/xfce4-terminal/slack-desc
new file mode 100644
index 00000000..cce31b6c
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-terminal/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xfce4-terminal: xfce4-terminal (Xfce's Terminal Emulator)
+xfce4-terminal:
+xfce4-terminal: This is the Xfce terminal emulator application. xfce4-terminal is 
+xfce4-terminal: a lightweight and easy to use terminal emulator for the X windowing
+xfce4-terminal: system, with some new ideas and features that make it unique among 
+xfce4-terminal: X terminal emulators.
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
diff --git a/testing/source/vtown/xfce/xfce4-terminal/xfce4-terminal.SlackBuild b/testing/source/vtown/xfce/xfce4-terminal/xfce4-terminal.SlackBuild
new file mode 100755
index 00000000..754dc74f
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-terminal/xfce4-terminal.SlackBuild
@@ -0,0 +1,131 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-terminal
+
+# Copyright 2010-2014  Robby Workman, Northport, Alabama, USA
+# Copyright 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-terminal
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --with-utempter \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* THANKS TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-terminal/xfce4-terminal.url b/testing/source/vtown/xfce/xfce4-terminal/xfce4-terminal.url
new file mode 100644
index 00000000..25ecf17d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-terminal/xfce4-terminal.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-terminal/0.8/xfce4-terminal-0.8.7.4.tar.bz2
diff --git a/testing/source/vtown/xfce/xfce4-weather-plugin/slack-desc b/testing/source/vtown/xfce/xfce4-weather-plugin/slack-desc
new file mode 100644
index 00000000..0335acf8
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-weather-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-weather-plugin: xfce4-weather-plugin (weather plugin for the Xfce panel)
+xfce4-weather-plugin:
+xfce4-weather-plugin: The weather plugin displays current weather conditions and forecasts.
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
diff --git a/testing/source/vtown/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild b/testing/source/vtown/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
new file mode 100755
index 00000000..97293d07
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
@@ -0,0 +1,116 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-weather-plugin
+
+# Copyright 2006-2018  Robby Workman, Tuscaloosa, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-weather-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+GEONAMES_USERNAME="slackware" \
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url b/testing/source/vtown/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
new file mode 100644
index 00000000..f6c68860
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
@@ -0,0 +1 @@
+https://archive.xfce.org/src/panel-plugins/xfce4-weather-plugin/
diff --git a/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/doinst.sh b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/doinst.sh
new file mode 100644
index 00000000..3e5691a0
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/doinst.sh
@@ -0,0 +1,9 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
diff --git a/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/slack-desc b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/slack-desc
new file mode 100644
index 00000000..eaef5a40
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                        |-----handy-ruler------------------------------------------------------|
+xfce4-whiskermenu-plugin: xfce4-whiskermenu-plugin (alternate application launcher for Xfce)
+xfce4-whiskermenu-plugin:
+xfce4-whiskermenu-plugin: Whisker Menu is an alternate application launcher for Xfce. When you
+xfce4-whiskermenu-plugin: open it you are shown a list of applications you have marked as
+xfce4-whiskermenu-plugin: favorites. You can browse through all of your installed applications
+xfce4-whiskermenu-plugin: by clicking on the category buttons on the side. Top level categories
+xfce4-whiskermenu-plugin: make browsing fast, and simple to switch between. Additionally,
+xfce4-whiskermenu-plugin: Whisker Menu keeps a list of the last ten applications
+xfce4-whiskermenu-plugin: that you've launched from it.
+xfce4-whiskermenu-plugin:
+xfce4-whiskermenu-plugin: Homepage: http://gottcode.org/xfce4-whiskermenu-plugin
diff --git a/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/xfce4-whiskermenu-plugin.SlackBuild b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/xfce4-whiskermenu-plugin.SlackBuild
new file mode 100755
index 00000000..d7bc6c4e
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/xfce4-whiskermenu-plugin.SlackBuild
@@ -0,0 +1,129 @@
+#!/bin/bash
+
+# Slackware build script for xfce4-whiskermenu-plugin
+
+# Copyright 2018, 2020  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfce4-whiskermenu-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_INSTALL_LIBDIR=/usr/lib${LIBDIRSUFFIX} \
+    -DCMAKE_INSTALL_MANDIR=/usr/man \
+    -DCMAKE_BUILD_TYPE=Release ..
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd ..
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/html
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/xfce4-whiskermenu-plugin.url b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/xfce4-whiskermenu-plugin.url
new file mode 100644
index 00000000..e8d56c2d
--- /dev/null
+++ b/testing/source/vtown/xfce/xfce4-whiskermenu-plugin/xfce4-whiskermenu-plugin.url
@@ -0,0 +1 @@
+https://archive.xfce.org/src/panel-plugins/xfce4-whiskermenu-plugin/
diff --git a/testing/source/vtown/xfce/xfconf/slack-desc b/testing/source/vtown/xfce/xfconf/slack-desc
new file mode 100644
index 00000000..26bb06fe
--- /dev/null
+++ b/testing/source/vtown/xfce/xfconf/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+xfconf: xfconf (Xfce configuration storage system)
+xfconf:
+xfconf: A daemon and query system for managing the storage and retrieval of
+xfconf: settings for the Xfce Desktop Environment, both graphically as well as
+xfconf: from the command line.
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
diff --git a/testing/source/vtown/xfce/xfconf/xfconf.SlackBuild b/testing/source/vtown/xfce/xfconf/xfconf.SlackBuild
new file mode 100755
index 00000000..e8846bb5
--- /dev/null
+++ b/testing/source/vtown/xfce/xfconf/xfconf.SlackBuild
@@ -0,0 +1,148 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfconf
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-gsettings-backend \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfdesktop/slack-desc b/testing/source/vtown/xfce/xfdesktop/slack-desc
new file mode 100644
index 00000000..44ad77b5
--- /dev/null
+++ b/testing/source/vtown/xfce/xfdesktop/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+xfdesktop: xfdesktop (Xfce desktop manager)
+xfdesktop:
+xfdesktop: Xfdesktop is a desktop manager for the Xfce Desktop Environment.
+xfdesktop: Desktop in this respect means the root window. The manager handles
+xfdesktop: tasks such as the background image and color, the root menu and window
+xfdesktop: list, minimized application icons, and file icons on the desktop.
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
diff --git a/testing/source/vtown/xfce/xfdesktop/xfdesktop.SlackBuild b/testing/source/vtown/xfce/xfdesktop/xfdesktop.SlackBuild
new file mode 100755
index 00000000..39bece2f
--- /dev/null
+++ b/testing/source/vtown/xfce/xfdesktop/xfdesktop.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+
+# Copyright 2012, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfdesktop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfwm4/slack-desc b/testing/source/vtown/xfce/xfwm4/slack-desc
new file mode 100644
index 00000000..46bc5e5c
--- /dev/null
+++ b/testing/source/vtown/xfce/xfwm4/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+xfwm4: xfwm4 (Xfce Window Manager)
+xfwm4:
+xfwm4: This package contains xfwm4 which is the window manager for Xfce4.
+xfwm4: It is designed to run with the rest of Xfce, but it also makes a
+xfwm4: capable window manager for any X11 environment.
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
diff --git a/testing/source/vtown/xfce/xfwm4/xfwm4.SlackBuild b/testing/source/vtown/xfce/xfwm4/xfwm4.SlackBuild
new file mode 100755
index 00000000..0aa4d4cd
--- /dev/null
+++ b/testing/source/vtown/xfce/xfwm4/xfwm4.SlackBuild
@@ -0,0 +1,148 @@
+#!/bin/bash
+
+# Copyright 2012, 2013, 2018, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xfwm4
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_vtown_1}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/etc/X11/xinit
+cat $CWD/xinitrc.xfce > $PKG/etc/X11/xinit/xinitrc.xfce
+chmod 0755 $PKG/etc/X11/xinit/*
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/testing/source/vtown/xfce/xfwm4/xfwm4.url b/testing/source/vtown/xfce/xfwm4/xfwm4.url
new file mode 100644
index 00000000..1c0e7066
--- /dev/null
+++ b/testing/source/vtown/xfce/xfwm4/xfwm4.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/xfce/xfwm4/4.12/xfwm4-4.12.5.tar.bz2
diff --git a/testing/source/vtown/xfce/xfwm4/xinitrc.xfce b/testing/source/vtown/xfce/xfwm4/xinitrc.xfce
new file mode 100644
index 00000000..82c0dd40
--- /dev/null
+++ b/testing/source/vtown/xfce/xfwm4/xinitrc.xfce
@@ -0,0 +1,40 @@
+#!/bin/sh
+#  xinitrc.xfce - modified to work around xfce4session bug
+#                 https://bugzilla.xfce.org/show_bug.cgi?id=8841
+
+
+########################################################################
+##  Merge in defaults and keymaps                                     ##
+########################################################################
+
+userresources=$HOME/.Xresources
+usermodmap=$HOME/.Xmodmap
+sysresources=/etc/X11/xinit/.Xresources
+sysmodmap=/etc/X11/xinit/.Xmodmap
+
+if [ -f $sysresources ]; then
+    /usr/bin/xrdb -merge $sysresources
+fi
+
+if [ -f $sysmodmap ]; then
+    /usr/bin/xmodmap $sysmodmap
+fi
+
+if [ -f $userresources ]; then
+    /usr/bin/xrdb -merge $userresources
+fi
+
+if [ -f $usermodmap ]; then
+    /usr/bin/xmodmap $usermodmap
+fi
+
+########################################################################
+##  Start xfce Desktop Environment                                    ##
+########################################################################
+
+if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
+  exec ck-launch-session dbus-launch --exit-with-session /usr/bin/startxfce4
+else
+  exec dbus-launch --exit-with-session /usr/bin/startxfce4
+fi
+