Mon May 28 19:12:29 UTC 201820180528191229

a/pkgtools-15.0-noarch-13.txz:  Rebuilt.
  installpkg: default line length for --terselength is the number of columns.
  removepkg: added --terse mode.
  upgradepkg: default line length for --terselength is the number of columns.
  upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz:  Upgraded.
d/bison-3.0.5-x86_64-1.txz:  Upgraded.
e/emacs-26.1-x86_64-1.txz:  Upgraded.
kde/kopete-4.14.3-x86_64-8.txz:  Rebuilt.
  Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz:  Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz:  Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz:  Upgraded.
n/links-2.16-x86_64-2.txz:  Rebuilt.
  Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz:  Upgraded.
n/nftables-0.8.5-x86_64-1.txz:  Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz:  Upgraded.
n/ulogd-2.0.7-x86_64-1.txz:  Upgraded.
n/whois-5.3.1-x86_64-1.txz:  Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz:  Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz:  Upgraded.

1 files changed, 26 insertions, 2 deletions

diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf
index 85a8041b..58766d25 100644
--- a/source/n/network-scripts/scripts/rc.inet1.conf
+++ b/source/n/network-scripts/scripts/rc.inet1.conf
@@ -16,24 +16,28 @@
 # Config information for eth0:
 IPADDR[0]=""
 NETMASK[0]=""
+IPALIASES[0]=""
 USE_DHCP[0]=""
 DHCP_HOSTNAME[0]=""
 
 # Config information for eth1:
 IPADDR[1]=""
 NETMASK[1]=""
+IPALIASES[1]=""
 USE_DHCP[1]=""
 DHCP_HOSTNAME[1]=""
 
 # Config information for eth2:
 IPADDR[2]=""
 NETMASK[2]=""
+IPALIASES[2]=""
 USE_DHCP[2]=""
 DHCP_HOSTNAME[2]=""
 
 # Config information for eth3:
 IPADDR[3]=""
 NETMASK[3]=""
+IPALIASES[3]=""
 USE_DHCP[3]=""
 DHCP_HOSTNAME[3]=""
 
@@ -47,14 +51,34 @@ DEBUG_ETH_UP="no"
 
 # Example of how to configure a bridge:
 # Note the added "BRNICS" variable which contains a space-separated list
-# of the physical network interfaces you want to add to the bridge.
+# of the physical or virtual network interfaces you want to add to the bridge.
 #IFNAME[0]="br0"
 #BRNICS[0]="eth0"
 #IPADDR[0]="192.168.0.1"
 #NETMASK[0]="255.255.255.0"
+#IPALIASES[0]=""
 #USE_DHCP[0]=""
 #DHCP_HOSTNAME[0]=""
 
+# Virtual interfaces to create - these are created before any address
+# configuration or bridge setup is done, so you may use these interfaces
+# as IFNAME or BRNICS values. These can be tun or tap interfaces:
+# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
+# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
+# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
+#
+# Virtual tap interface example
+#VIRTIFNAME[0]="tap0"
+#VIRTIFTYPE[0]="tap"
+#VIRTIFUSER[0]="root"
+#VIRTIFGROUP[0]="root"
+#
+# Virtual tun interface example
+#VIRTIFNAME[1]="tun0"
+#VIRTIFTYPE[1]="tun"
+#VIRTIFUSER[1]="someuser"
+#VIRTIFGROUP[1]="somegroup"
+
 ## Example config information for wlan0.  Uncomment the lines you need and fill
 ## in your data.  (You may not need all of these for your wireless network)
 #IFNAME[4]="wlan0"
@@ -85,7 +109,7 @@ DEBUG_ETH_UP="no"
 #MTU[4]=""                      # The default MTU is 1500, but you might need
                                 # 1360 when you use NAT'ed IPSec traffic.
 #DHCP_TIMEOUT[4]=15             # The default timeout for the DHCP client to
-                                # wait for server resonse is 10 seconds, but
+                                # wait for server resonse is 15 seconds, but
                                 # you might want a shorter or longer wait.
 #DHCP_KEEPRESOLV[4]="yes"       # If you don't want /etc/resolv.conf overwritten
 #DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten