Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 210 insertions, 0 deletions

diff --git a/source/l/db44/db44.SlackBuild b/source/l/db44/db44.SlackBuild
new file mode 100755
index 00000000..321af9c8
--- /dev/null
+++ b/source/l/db44/db44.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=4.4.20
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-db44
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+cd $TMP
+rm -rf db-$VERSION
+tar xjvf $CWD/db-$VERSION.tar.bz2
+cd db-$VERSION
+
+# Official patches:
+zcat $CWD/patch.4.4.20.1.gz | patch -p0 --verbose
+zcat $CWD/patch.4.4.20.2.gz | patch -p0 --verbose
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+rm -rf build-dir
+mkdir build-dir
+cd build-dir
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+../dist/configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-shared \
+  --enable-rpc \
+  --enable-cxx \
+  --enable-compat185 \
+  $ARCH-slackware-linux
+
+make -j3
+make install DESTDIR=$PKG
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+# Remove WAY TOO LARGE (and misplaced) docs:
+rm -rf $PKG/usr/docs
+mkdir -p $PKG/usr/doc/db-$VERSION
+cp -a \
+  ../LICENSE ../README \
+  $PKG/usr/doc/db-$VERSION
+cat << EOF > $PKG/usr/doc/db-$VERSION/README-DOCS
+
+  For a ton of additional documentation (too large to include
+  here) on writing source code that uses libdb44, please see
+  the source tarball db-$VERSION.tar.bz2, which can be found
+  in the Slackware source tree in source/l/db44/, or on
+  Sleepycat's web site:  http://www.sleepycat.com.
+
+EOF
+
+# Move include files:
+( cd $PKG/usr/include
+  mkdir db44
+  mv *.h db44
+  for file in db44/* ; do
+    ln -sf $file .
+  done
+  # Better add this symlink, too, just to be safe...
+  ln -sf db44 db4
+)
+
+# Put libdb-4.4.so into /lib${LIBDIRSUFFIX} since it might be needed
+# before /usr is mounted (eg, nsswitch.conf can be set up to
+# use databases instead of flat files)
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+mv $PKG/usr/lib${LIBDIRSUFFIX}/libdb-4.4.so $PKG/lib${LIBDIRSUFFIX}/libdb-4.4.so
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  ln -sf /lib${LIBDIRSUFFIX}/libdb-4.4.so .
+)
+
+# Some things might look for these libraries by other names.
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  ln -sf libdb-4.4.a libdb-4.a
+  ln -sf libdb-4.4.a libdb4.a
+  ln -sf libdb-4.4.a libdb.a
+  ln -sf libdb_cxx-4.4.a libdb_cxx-4.a
+  ln -sf libdb_cxx-4.4.a libdb_cxx.a
+  ln -sf libdb-4.4.so libdb4.so
+  ln -sf libdb-4.4.so libdb.so
+)
+
+chmod 755 $PKG/usr/bin/*
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+makepkg -l y -c n $TMP/db44-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/db44/patch.4.4.20.1 b/source/l/db44/patch.4.4.20.1
new file mode 100644
index 00000000..f6877290
--- /dev/null
+++ b/source/l/db44/patch.4.4.20.1
@@ -0,0 +1,27 @@
+*** qam/qam_files.c.orig	2005-10-20 11:57:12.000000000 -0700
+--- qam/qam_files.c	2006-01-27 13:38:38.000000000 -0800
+***************
+*** 411,416 ****
+--- 411,422 ----
+  	    DB_APP_DATA, buf, 0, NULL, &real_name)) != 0)
+  		goto err;
+  #endif
++ 
++ 	mpf = array->mpfarray[offset].mpf;
++ 	/* This extent my already be marked for delete and closed. */
++ 	if (mpf == NULL)
++ 		goto err;
++ 
+  	/*
+  	 * The log must be flushed before the file is deleted.  We depend on
+  	 * the log record of the last delete to recreate the file if we crash.
+***************
+*** 418,424 ****
+  	if (LOGGING_ON(dbenv) && (ret = __log_flush(dbenv, NULL)) != 0)
+  		goto err;
+  
+- 	mpf = array->mpfarray[offset].mpf;
+  	(void)__memp_set_flags(mpf, DB_MPOOL_UNLINK, 1);
+  	/* Someone could be real slow, let them close it down. */
+  	if (array->mpfarray[offset].pinref != 0)
+--- 424,429 ----
diff --git a/source/l/db44/patch.4.4.20.2 b/source/l/db44/patch.4.4.20.2
new file mode 100644
index 00000000..0231ec71
--- /dev/null
+++ b/source/l/db44/patch.4.4.20.2
@@ -0,0 +1,29 @@
+*** txn/txn.c.orig	Tue Nov  1 06:50:03 2005
+--- txn/txn.c	Tue Jan 31 15:05:13 2006
+***************
+*** 1049,1060 ****
+--- 1049,1062 ----
+  		return (ret);
+  	memcpy(txn->name, name, len);
+  
++ 	TXN_SYSTEM_LOCK(dbenv);
+  	if (td->name != INVALID_ROFF) {
+  		__db_shalloc_free(
+  		    &mgr->reginfo, R_ADDR(&mgr->reginfo, td->name));
+  		td->name = INVALID_ROFF;
+  	}
+  	if ((ret = __db_shalloc(&mgr->reginfo, len, 0, &p)) != 0) {
++ 		TXN_SYSTEM_UNLOCK(dbenv);
+  		__db_err(dbenv,
+  		    "Unable to allocate memory for transaction name");
+  
+***************
+*** 1063,1068 ****
+--- 1065,1071 ----
+  
+  		return (ret);
+  	}
++ 	TXN_SYSTEM_UNLOCK(dbenv);
+  	td->name = R_OFFSET(&mgr->reginfo, p);
+  	memcpy(p, name, len);
+  
diff --git a/source/l/db44/slack-desc b/source/l/db44/slack-desc
new file mode 100644
index 00000000..fcb8418c
--- /dev/null
+++ b/source/l/db44/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+db44: db4 (Berkeley database library version 4.4.x)
+db44:
+db44: The Berkeley Database (Berkeley DB) library provides embedded database
+db44: support for both traditional and client/server applications.
+db44:
+db44: This package should be installed if compatibility is needed with
+db44: databases created with the Berkeley DB version 4.4.x.
+db44:
+db44:
+db44:
+db44: