Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 172 insertions, 0 deletions

diff --git a/source/a/mt-st/mt-st.config.diff b/source/a/mt-st/mt-st.config.diff
new file mode 100644
index 00000000..756261b1
--- /dev/null
+++ b/source/a/mt-st/mt-st.config.diff
@@ -0,0 +1,172 @@
+--- mt-st-0.8/stinit.def.examples.configfiles	2002-09-23 19:02:21.000000000 +0200
++++ mt-st-0.8/stinit.def.examples	2005-04-07 08:21:01.732633520 +0200
+@@ -56,3 +56,169 @@
+ mode3 blocksize=0 density=1   #  800 bpi
+ }
+ 
++# DLT2000 / 2000XT
++manufacturer="QUANTUM" model = "DLT2000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++mode1 blocksize=0 density=0x81	# 10GB + compression on DLTtape III, 15+ with DLTtape IIIXT in 2000XT
++mode2 blocksize=0 density=0x80	# 10GB, no compression  on DLTtape III, 15 with DLTtape IIIXT in 2000XT
++mode3 blocksize=0 density=0x18  #  6GB, compression not available, on DLTtape III
++mode4 blocksize=0 density=0x17  #2.6GB, compression not available, on DLTtape III
++}
++
++# DLT4000
++manufacturer="QUANTUM" model = "DLT4000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible, use older modes (e.g. from above) as required
++mode1 blocksize=0 density=0x83  # 20GB + compression
++mode2 blocksize=0 density=0x82  # 20GB, no compression
++mode3 blocksize=0 density=0x81	# 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT
++mode4 blocksize=0 density=0x80	# 10GB, no compression  (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT
++}
++
++# DLT7000
++manufacturer="QUANTUM" model = "DLT7000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible, use older modes (e.g. from above) as required.
++mode1 blocksize=0 density=0x85  # 35GB + compression
++mode2 blocksize=0 density=0x84  # 35GB, no compression
++mode3 blocksize=0 density=0x83	# 20GB + compression (DLT4000 mode)
++mode4 blocksize=0 density=0x82	# 20GB, no compression (DLT4000 mode)
++}
++
++# DLT8000
++manufacturer="QUANTUM" model = "DLT8000" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported!
++mode1 blocksize=0 density=0x89	# 40GB + compression
++mode2 blocksize=0 density=0x88	# 40GB, no compression
++mode3 blocksize=0 density=0x85  # 35GB + compression (DLT7000 mode)
++mode4 blocksize=0 density=0x84  # 35GB, no compression (DLT7000 mode)
++}
++
++
++# SDLT220
++manufacturer="QUANTUM" model = "SuperDLT1" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so no need to define any other modes here.
++mode1 blocksize=0 density=0x48 compression=1	# 110 GB + compression
++mode2 blocksize=0 density=0x48 compression=0	# 110 GB, no ompression
++}
++
++# SDLT320
++manufacturer="QUANTUM" model = "SDLT320" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards write compatible to SDLT220 and read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so we need only the SDL220/320 modes here
++mode1 blocksize=0 density=0x49 compression=1	# 160 GB + compression
++mode2 blocksize=0 density=0x49 compression=0	# 160 GB, no ompression
++mode3 blocksize=0 density=0x48 compression=1	# 110 GB + compression
++mode4 blocksize=0 density=0x48 compression=0	# 110 GB, no ompression
++}
++
++# SDLT600
++manufacturer="QUANTUM" model = "SDLT600" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards read compatible to SDLT220/320 and VS160. Mode settings are only required for writing, so we need only the native SDLT600 mode here.
++mode1 blocksize=0 density=0x4a compression=1	# 300 GB + compression
++mode2 blocksize=0 density=0x4a compression=0	# 300 GB, no ompression
++mode3 blocksize=0 density=0x4a compression=1	# 300 GB + compression
++mode4 blocksize=0 density=0x4a compression=0	# 300 GB, no ompression
++}
++