Fri May 25 23:29:36 UTC 201813.1

patches/packages/glibc-zoneinfo-2018e-noarch-2_slack13.1.txz:  Rebuilt.
  Handle removal of US/Pacific-New timezone. If we see that the machine is
  using this, it will be automatically switched to US/Pacific.

11 files changed, 470 insertions, 0 deletions

diff --git a/patches/source/sendmail/Build b/patches/source/sendmail/Build
new file mode 100644
index 00000000..21950d49
--- /dev/null
+++ b/patches/source/sendmail/Build
@@ -0,0 +1,29 @@
+#!/bin/sh
+# Copyright 2004 Slackware Linux, Inc.  Concord, CA 94520
+# Copyright 2007, 2008  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# A script to build .cf files from .mc files:
+
+for mcfile in $* ; do
+  /usr/bin/m4 /usr/share/sendmail/cf/m4/cf.m4 $mcfile > $(basename $mcfile .mc).cf
+done
+
diff --git a/patches/source/sendmail/SlackBuild-sendmail b/patches/source/sendmail/SlackBuild-sendmail
new file mode 100755
index 00000000..2f1ab33e
--- /dev/null
+++ b/patches/source/sendmail/SlackBuild-sendmail
@@ -0,0 +1,168 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+VERSION=8.14.9
+BUILD=${BUILD:-1_slack13.1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sendmail
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# Explode the package framework:
+cd $PKG
+explodepkg $CWD/_sendmail.tar.gz
+[ -n "${LIBDIRSUFFIX}" ] && mv $PKG/usr/lib $PKG/usr/lib${LIBDIRSUFFIX}
+
+echo "+=================+"
+echo "| sendmail.$VERSION |"
+echo "+=================+"
+OSCPU="`uname -srm | tr ' ' '.'`"
+cd $TMP
+rm -rf sendmail-$VERSION
+tar xvf $CWD/sendmail.$VERSION.tar.gz || exit 1
+cd sendmail-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Add TLS support to the sendmail binary:
+cat $CWD/site.config.m4 > devtools/Site/site.config.m4
+
+# Build .cf files for Linux:
+cd $TMP/sendmail-$VERSION/cf/cf
+cp $CWD/*.mc .
+cp linux.uucp.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/linux.uucp.cf
+cp sendmail-slackware.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/sendmail-slackware.cf
+cp sendmail-slackware-tls.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/sendmail-slackware-tls.cf
+cp sendmail-slackware-tls-sasl.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/sendmail-slackware-tls-sasl.cf
+
+# Add a sample sendmail.cf:
+cat $PKG/usr/share/sendmail/sendmail-slackware.cf > $PKG/etc/mail/sendmail.cf.new
+cat submit.cf > $PKG/etc/mail/submit.cf.new
+
+cd $TMP/sendmail-$VERSION
+## All "Build" does is call make while screwing up the options  :-)
+## sh Build
+make O="$SLKCFLAGS"
+#O="$SLKCFLAGS" sh Build
+cat sendmail/mailq.1 | gzip -9c > $PKG/usr/man/man1/mailq.1.gz
+cat sendmail/newaliases.1 | gzip -9c > $PKG/usr/man/man1/newaliases.1.gz
+mkdir -p $PKG/usr/doc/sendmail-$VERSION
+cp -a \
+  FAQ INSTALL KNOWNBUGS LICENSE PGPKEYS README RELEASE_NOTES \
+  $PKG/usr/doc/sendmail-$VERSION
+( cd doc ; cp -a op $PKG/usr/doc/sendmail-$VERSION )
+
+cd obj.$OSCPU/sendmail
+cat sendmail > $PKG/usr/sbin/sendmail.new
+cat aliases.5 | gzip -9c > $PKG/usr/man/man5/aliases.5.gz
+cat sendmail.8 | gzip -9c > $PKG/usr/man/man8/sendmail.8.gz
+cat statistics > $PKG/etc/mail/statistics
+cat ../../sendmail/helpfile > $PKG/etc/mail/helpfile
+cd ../makemap
+cat makemap > $PKG/usr/sbin/makemap
+cat makemap.8 | gzip -9c > $PKG/usr/man/man8/makemap.8.gz
+cd ../mailstats
+cat mailstats > $PKG/usr/sbin/mailstats
+cat mailstats.8 | gzip -9c > $PKG/usr/man/man8/mailstats.8.gz
+cd ../praliases
+cat praliases > $PKG/usr/bin/praliases
+chmod 755 $PKG/usr/bin/praliases
+cat praliases.8 | gzip -9c > $PKG/usr/man/man8/praliases.8.gz
+cd ../rmail
+cat rmail > $PKG/usr/bin/rmail
+cat rmail.8 | gzip -9c > $PKG/usr/man/man8/rmail.8.gz
+cd ../smrsh
+cat smrsh > $PKG/usr/sbin/smrsh
+cat smrsh.8 | gzip -9c > $PKG/usr/man/man8/smrsh.8.gz
+cd ../mail.local
+cat mail.local > $PKG/usr/sbin/mail.local
+cat mail.local.8 | gzip -9c > $PKG/usr/man/man8/mail.local.8.gz
+cd ../vacation
+cat vacation > $PKG/usr/bin/vacation
+cat vacation.1 | gzip -9c > $PKG/usr/man/man1/vacation.1.gz
+cd ../editmap
+cat editmap > $PKG/usr/sbin/editmap
+cat editmap.8 | gzip -9c > $PKG/usr/man/man8/editmap.8.gz
+
+# Add libmilter:
+cd $TMP/sendmail-$VERSION/libmilter
+./Build
+cd ..
+mkdir -p $PKG/usr/include
+mkdir -p $PKG/usr/include/libmilter
+cp -a include/libmilter/mfapi.h $PKG/usr/include/libmilter
+cp -a include/libmilter/mfdef.h $PKG/usr/include/libmilter
+cp -a obj.*/libmilter/libmilter.a $PKG/usr/lib${LIBDIRSUFFIX}
+strip -g $PKG/usr/lib${LIBDIRSUFFIX}/libmilter.a
+chmod 644 $PKG/usr/lib${LIBDIRSUFFIX}/libmilter.a $PKG/usr/include/libmilter/*
+mkdir -p $PKG/usr/doc/sendmail-$VERSION/libmilter
+cp -a libmilter/README $PKG/usr/doc/sendmail-$VERSION/libmilter
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+cat $CWD/slack-desc.sendmail > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/sendmail-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/patches/source/sendmail/SlackBuild-sendmail-cf b/patches/source/sendmail/SlackBuild-sendmail-cf
new file mode 100755
index 00000000..555f7170
--- /dev/null
+++ b/patches/source/sendmail/SlackBuild-sendmail-cf
@@ -0,0 +1,57 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+VERSION=8.14.9
+ARCH=noarch
+BUILD=${BUILD:-1_slack13.1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sendmail-cf
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+echo "+====================+"
+echo "| sendmail.cf.$VERSION |"
+echo "+====================+"
+( cd $TMP/sendmail-$VERSION ; find . -name "*~" -print -exec rm {} \; )
+cd $PKG
+mkdir -p usr/share/sendmail/cf
+cd usr/share/sendmail/cf
+cp -a $TMP/sendmail-$VERSION/cf/README .
+cp -a $TMP/package-sendmail/usr/share/sendmail/README.linux .
+for dir in cf domain feature hack m4 mailer ostype sh siteconfig ; do
+  cp -a $TMP/sendmail-$VERSION/cf/$dir .
+done
+# Replace the sendmail Build script with a simple (working) one:
+cp -a $PKG/usr/share/sendmail/cf/cf/Build $PKG/usr/share/sendmail/cf/cf/Build.orig
+zcat $CWD/Build.gz > $PKG/usr/share/sendmail/cf/cf/Build
+chown -R root.root *
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc.sendmail-cf > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/sendmail-cf-$VERSION-noarch-$BUILD.txz
+
diff --git a/patches/source/sendmail/linux.uucp.mc b/patches/source/sendmail/linux.uucp.mc
new file mode 100644
index 00000000..ffd242bb
--- /dev/null
+++ b/patches/source/sendmail/linux.uucp.mc
@@ -0,0 +1,8 @@
+include(`../m4/cf.m4')
+VERSIONID(`linux for setup with uucp which uses domain names')dnl
+OSTYPE(linux)
+FEATURE(always_add_domain)dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(uucp)
+define(`SMART_HOST', uucp-dom:otheruucphost)
diff --git a/patches/source/sendmail/sendmail-slackware-tls-sasl.mc b/patches/source/sendmail/sendmail-slackware-tls-sasl.mc
new file mode 100644
index 00000000..ed5753b4
--- /dev/null
+++ b/patches/source/sendmail/sendmail-slackware-tls-sasl.mc
@@ -0,0 +1,61 @@
+dnl# This is the a sendmail .mc file for Slackware with TLS support.
+dnl# To generate the sendmail.cf file from this (perhaps after making
+dnl# some changes), use the m4 files in /usr/share/sendmail/cf like this:
+dnl#
+dnl# cp sendmail-slackware-tls.mc /usr/share/sendmail/cf/config.mc
+dnl# cd /usr/share/sendmail/cf
+dnl# sh Build config.mc
+dnl#
+dnl# You may then install the resulting .cf file:
+dnl# cp config.cf /etc/mail/sendmail.cf
+dnl#
+include(`../m4/cf.m4')
+VERSIONID(`TLS supporting setup for Slackware Linux')dnl
+OSTYPE(`linux')dnl
+dnl#
+dnl# You will need to create the certificates below with OpenSSL first:
+define(`confCACERT_PATH', `/etc/mail/certs/')
+define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
+define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem')
+define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem')
+dnl# These settings help protect against people verifying email addresses
+dnl# at your site in order to send you email that you probably don't want:
+define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
+dnl# Uncomment the line below to send outgoing mail through an external server:
+dnl define(`SMART_HOST',`mailserver.example.com')
+dnl# No timeout for ident:
+define(`confTO_IDENT', `0')dnl
+dnl# Enable the line below to use smrsh to restrict what sendmail can run:
+dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
+dnl# See the README in /usr/share/sendmail/cf for a ton of information on
+dnl# how these options work:
+FEATURE(`use_cw_file')dnl
+FEATURE(`use_ct_file')dnl
+FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
+FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
+FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
+FEATURE(`blacklist_recipients')dnl
+FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
+FEATURE(`always_add_domain')dnl
+FEATURE(`redirect')dnl
+FEATURE(`no_default_msa')dnl
+dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
+dnl FEATURE(`accept_unresolvable_domains')dnl
+EXPOSED_USER(`root')dnl
+dnl# Also accept mail for localhost.localdomain:
+LOCAL_DOMAIN(`localhost.localdomain')dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(procmail)dnl
+dnl# Allow SASL authentication/relaying:
+define(`confAUTH_OPTIONS', `A p y')dnl
+define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
+TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
+DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
+dnl# Daemon options after M= below that might need to be changed are:
+dnl# s (allow SSL, not only TLS)
+dnl# a (require authentication)
+DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Esa')dnl
+LOCAL_CONFIG
+dnl# Do not allow the weak SSLv2:
+O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL
diff --git a/patches/source/sendmail/sendmail-slackware-tls.mc b/patches/source/sendmail/sendmail-slackware-tls.mc
new file mode 100644
index 00000000..01a66775
--- /dev/null
+++ b/patches/source/sendmail/sendmail-slackware-tls.mc
@@ -0,0 +1,56 @@
+dnl# This is the a sendmail .mc file for Slackware with TLS support.
+dnl# To generate the sendmail.cf file from this (perhaps after making
+dnl# some changes), use the m4 files in /usr/share/sendmail/cf like this:
+dnl#
+dnl# cp sendmail-slackware-tls.mc /usr/share/sendmail/cf/config.mc
+dnl# cd /usr/share/sendmail/cf
+dnl# sh Build config.mc
+dnl#
+dnl# You may then install the resulting .cf file:
+dnl# cp config.cf /etc/mail/sendmail.cf
+dnl#
+include(`../m4/cf.m4')
+VERSIONID(`TLS supporting setup for Slackware Linux')dnl
+OSTYPE(`linux')dnl
+dnl#
+dnl# You will need to create the certificates below with OpenSSL first:
+define(`confCACERT_PATH', `/etc/mail/certs/')
+define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
+define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem')
+define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem')
+dnl# These settings help protect against people verifying email addresses
+dnl# at your site in order to send you email that you probably don't want:
+define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
+dnl# Uncomment the line below to send outgoing mail through an external server:
+dnl define(`SMART_HOST',`mailserver.example.com')
+dnl# No timeout for ident:
+define(`confTO_IDENT', `0')dnl
+dnl# Enable the line below to use smrsh to restrict what sendmail can run:
+dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
+dnl# See the README in /usr/share/sendmail/cf for a ton of information on
+dnl# how these options work:
+FEATURE(`use_cw_file')dnl
+FEATURE(`use_ct_file')dnl
+FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
+FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
+FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
+FEATURE(`blacklist_recipients')dnl
+FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
+FEATURE(`always_add_domain')dnl
+FEATURE(`redirect')dnl
+dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
+dnl FEATURE(`accept_unresolvable_domains')dnl
+EXPOSED_USER(`root')dnl
+dnl# Also accept mail for localhost.localdomain:
+LOCAL_DOMAIN(`localhost.localdomain')dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(procmail)dnl
+DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
+dnl# Daemon options after M= below that might need to be changed are:
+dnl# s (allow SSL, not only TLS)
+dnl# a (require authentication)
+DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Es')dnl
+LOCAL_CONFIG
+dnl# Do not allow the weak SSLv2:
+O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL
diff --git a/patches/source/sendmail/sendmail-slackware.mc b/patches/source/sendmail/sendmail-slackware.mc
new file mode 100644
index 00000000..4fd4620b
--- /dev/null
+++ b/patches/source/sendmail/sendmail-slackware.mc
@@ -0,0 +1,42 @@
+dnl# This is the default sendmail .mc file for Slackware.  To generate
+dnl# the sendmail.cf file from this (perhaps after making some changes),
+dnl# use the m4 files in /usr/share/sendmail/cf like this:
+dnl#
+dnl# cp sendmail-slackware.mc /usr/share/sendmail/cf/config.mc
+dnl# cd /usr/share/sendmail/cf
+dnl# sh Build config.cf
+dnl#
+dnl# You may then install the resulting .cf file:
+dnl# cp config.cf /etc/mail/sendmail.cf
+dnl#
+include(`../m4/cf.m4')
+VERSIONID(`default setup for Slackware Linux')dnl
+OSTYPE(`linux')dnl
+dnl# These settings help protect against people verifying email addresses
+dnl# at your site in order to send you email that you probably don't want:
+define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
+dnl# Uncomment the line below to send outgoing mail through an external server:
+dnl define(`SMART_HOST',`mailserver.example.com')
+dnl# No timeout for ident:
+define(`confTO_IDENT', `0')dnl
+dnl# Enable the line below to use smrsh to restrict what sendmail can run:
+dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
+dnl# See the README in /usr/share/sendmail/cf for a ton of information on
+dnl# how these options work:
+FEATURE(`use_cw_file')dnl
+FEATURE(`use_ct_file')dnl
+FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
+FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
+FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
+FEATURE(`blacklist_recipients')dnl
+FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
+FEATURE(`always_add_domain')dnl
+FEATURE(`redirect')dnl
+dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
+dnl FEATURE(`accept_unresolvable_domains')dnl
+EXPOSED_USER(`root')dnl
+dnl# Also accept mail for localhost.localdomain:
+LOCAL_DOMAIN(`localhost.localdomain')dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(procmail)dnl
diff --git a/patches/source/sendmail/sendmail.SlackBuild b/patches/source/sendmail/sendmail.SlackBuild
new file mode 100755
index 00000000..462f16e9
--- /dev/null
+++ b/patches/source/sendmail/sendmail.SlackBuild
@@ -0,0 +1,3 @@
+#!/bin/sh
+./SlackBuild-sendmail $*
+./SlackBuild-sendmail-cf $*
diff --git a/patches/source/sendmail/site.config.m4 b/patches/source/sendmail/site.config.m4
new file mode 100644
index 00000000..09b1d72f
--- /dev/null
+++ b/patches/source/sendmail/site.config.m4
@@ -0,0 +1,8 @@
+APPENDDEF(`confENVDEF', `-DNETINET6')
+APPENDDEF(`confMAPDEF', `-DNEWDB -DSTARTTLS -DSASL=2 -DTCPWRAPPERS -DNIS -DMAP_REGEX -DSOCKETMAP')
+APPENDDEF(`confLIBS', `-lnsl -lssl -lcrypto -lsasl2 -lwrap -lm -ldb -lresolv')
+APPENDDEF(`conf_libmilter_ENVDEF', `-DMILTER')
+APPENDDEF(`conf_sendmail_ENVDEF', `-DMILTER')
+APPENDDEF(`conf_libmilter_ENVDEF', `-D_FFR_MILTER_ROOT_UNSAFE ')
+APPENDDEF(`confENVDEF', `-DBROKEN_PTHREAD_SLEEP')
+APPENDDEF(`confENVDEF', `-D_FFR_TLS_1')dnl
diff --git a/patches/source/sendmail/slack-desc.sendmail b/patches/source/sendmail/slack-desc.sendmail
new file mode 100644
index 00000000..cdcc9387
--- /dev/null
+++ b/patches/source/sendmail/slack-desc.sendmail
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+sendmail: sendmail (mail transfer agent)
+sendmail:
+sendmail: Eric Allman's mail transport agent. The _Unix System Administration
+sendmail: Handbook_ calls sendmail 'The most complex and complete mail delivery
+sendmail: system in common use...'
+sendmail:
+sendmail: Ready-made configuration files are included for systems connected by
+sendmail: TCP/IP (with or without a nameserver) and for systems using UUCP.
+sendmail:
+sendmail: The procmail package is required to handle local mail delivery.
+sendmail:
diff --git a/patches/source/sendmail/slack-desc.sendmail-cf b/patches/source/sendmail/slack-desc.sendmail-cf
new file mode 100644
index 00000000..df56efdc
--- /dev/null
+++ b/patches/source/sendmail/slack-desc.sendmail-cf
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+sendmail-cf: sendmail-cf (configuration files for sendmail)
+sendmail-cf:
+sendmail-cf: These files are used to create sendmail.cf configuration files.  The
+sendmail-cf: m4 macro processor is also required in order to make use of these
+sendmail-cf: files. 
+sendmail-cf:
+sendmail-cf: The files and documentation in /usr/share/sendmail should make it
+sendmail-cf: possible to support virtually any mail configuration.  NOTE: You
+sendmail-cf: probably won't need this package if you're planning to use one of the
+sendmail-cf: sendmail.cf samples included in the sendmail package.
+sendmail-cf: