Fri May 25 23:29:36 UTC 201814.2

patches/packages/glibc-zoneinfo-2018e-noarch-2_slack14.2.txz:  Rebuilt.
  Handle removal of US/Pacific-New timezone. If we see that the machine is
  using this, it will be automatically switched to US/Pacific.

1 files changed, 224 insertions, 0 deletions

diff --git a/patches/source/samba/samba.SlackBuild b/patches/source/samba/samba.SlackBuild
new file mode 100755
index 00000000..de6bbf45
--- /dev/null
+++ b/patches/source/samba/samba.SlackBuild
@@ -0,0 +1,224 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2012, 2013, 2015, 2016  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
+VERSION=${VERSION:-$(echo samba-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3_slack14.2}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i586 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i586" ]; then
+    SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-samba
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ -r /usr/lib${LIBDIRSUFFIX}/libtalloc.so.? -a ! -r /var/log/packages/talloc* ]; then
+  echo "The Samba package needs to be removed before building to ensure that"
+  echo "talloc (and possibly other bundled libraries) are included in the build."
+  echo
+  echo "Removing the Samba package in 15 seconds, and then continuing with the build."
+  sleep 15
+  removepkg samba
+fi
+
+cd $TMP
+rm -rf samba-$VERSION
+tar xvf $CWD/samba-$VERSION.tar.xz || exit 1
+cd samba-$VERSION || exit 1
+
+# Patch to install talloc/tevent/tdb libraries and includes:
+zcat $CWD/samba.install.talloc.tevent.tdb.diff.gz | patch -p1 --verbose || exit 1
+
+# Patch CVE-2017-14746 and CVE-2017-15275:
+zcat $CWD/samba-4.5.14-security-2017-11-21.patch.gz | patch -p1 --verbose || exit 1
+
+# Patch CVE-2018-1057:
+zcat $CWD/samba-4.4.16-CVE-2018-1057.patch.gz | patch -p1 --verbose || exit 1
+
+if [ ! -d source3/lib/cmdline ]; then
+  ( cd source3/lib
+    mkdir cmdline
+    cd cmdline
+    ln -sf ../../../source3/include/popt_common.h . )
+fi
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Some of these options could be auto-detected, but declaring them
+# here doesn't hurt and helps document what features we're trying to
+# build in.
+#
+# LDFLAGS are needed to avoid problems with missing symbols.
+LDFLAGS="-Wl,--no-as-needed" \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --enable-fhs \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --includedir=/usr/include \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --with-configdir=/etc/samba \
+  --with-piddir=/var/run \
+  --with-privatedir=/var/lib/samba/private \
+  --with-privatelibdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-modulesdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-lockdir=/var/cache/samba \
+  --with-logfilebase=/var/log/samba \
+  --localstatedir=/var \
+  --enable-cups \
+  --with-acl-support \
+  --with-automount \
+  --with-quotas \
+  --with-syslog \
+  --with-utmp \
+  --with-winbind \
+  --with-ldap \
+  --with-ads \
+  --without-pam \
+  --build=$TARGET
+  # Gives errors:
+  #--builtin-libraries=replace,ccan \
+  #--bundled-libraries=heimdal \
+
+# -j options don't seem to work... [Yes they do!  At least try to use -j below...]
+JOBS=6
+MAXJOBS=6
+export JOBS MAXJOBS
+make -j $MAXJOBS || make || exit 1
+
+mkdir -p \
+         $PKG/usr/doc/samba-$VERSION \
+         $PKG/var/spool/samba \
+         $PKG/var/log/samba \
+         $PKG/var/lib/samba/private \
+         $PKG/var/cache/samba
+chmod 700 $PKG/var/lib/samba/private
+chmod 1777 $PKG/var/spool/samba
+
+make install DESTDIR=$PKG || exit 1
+
+# Install the smbprint script:
+install -m0744 packaging/printing/smbprint $PKG/usr/bin/smbprint
+
+# Add a sample config file:
+cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample
+
+# Setup a default lmhosts file:
+echo "127.0.0.1	localhost" > $PKG/etc/samba/lmhosts.new
+
+if [ ! -r $PKG/usr/bin/smbget ]; then
+  rm -f $PKG/usr/share/man/man1/smbget.1
+fi
+
+# We'll add rc.samba to the init directory, but chmod 644 so that it doesn't
+# start by default:
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.samba > $PKG/etc/rc.d/rc.samba.new
+chmod 644 $PKG/etc/rc.d/rc.samba.new
+
+mv $PKG/usr/share/man $PKG/usr
+gzip -9 $PKG/usr/man/man?/*.?
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# PAM related stuff we don't use:
+rm -r $PKG/usr/share/locale
+rm -f $PKG/usr/man/man8/pam*
+
+cp -a \
+  COPYING* MAINTAINERS Manifest PFIF.txt README* \
+  Read-Manifest-Now Roadmap WHATSNEW.txt docs examples \
+  $PKG/usr/doc/samba-$VERSION
+# These are installed elsewhere:
+rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \
+       $PKG/usr/doc/samba-$VERSION/docs/manpages
+# Empty now?
+rmdir $PKG/usr/doc/samba-$VERSION/docs 2> /dev/null
+# I'm sorry, but when all this info is included in HTML, adding 7MB worth of
+# PDF files just to have extra artwork is more fluff than I'll agree to.
+rm -f $PKG/usr/doc/samba-$VERSION/docs/*.pdf
+# Also redundant also:
+rm -rf $PKG/usr/doc/samba-$VERSION/docs/docbook
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cat << EOF
+
+*** Be sure the package contains:
+
+drwxr-xr-x   2 root     root         4096 May  3 15:46 /var/cache/samba/
+drwx------   2 root     root         1024 Mar 12 13:21 /var/lib/samba/private
+drwxr-xr-x   2 root     root           48 Aug 29 13:06 /var/log/samba/
+drwxrwxrwt   2 root     root         1024 Mar 12 13:21 /var/spool/samba/
+
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/samba-$VERSION-$ARCH-$BUILD.txz
+