Fri May 25 23:29:36 UTC 201813.37

patches/packages/glibc-zoneinfo-2018e-noarch-2_slack13.37.txz:  Rebuilt.
  Handle removal of US/Pacific-New timezone. If we see that the machine is
  using this, it will be automatically switched to US/Pacific.

10 files changed, 842 insertions, 0 deletions

diff --git a/patches/source/libXi/arch.use.flags b/patches/source/libXi/arch.use.flags
new file mode 100644
index 00000000..11087c88
--- /dev/null
+++ b/patches/source/libXi/arch.use.flags
@@ -0,0 +1,9 @@
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
diff --git a/patches/source/libXi/build/libXi b/patches/source/libXi/build/libXi
new file mode 100644
index 00000000..b03430ed
--- /dev/null
+++ b/patches/source/libXi/build/libXi
@@ -0,0 +1 @@
+1_slack13.37
diff --git a/patches/source/libXi/configure/configure b/patches/source/libXi/configure/configure
new file mode 100644
index 00000000..dcb1109b
--- /dev/null
+++ b/patches/source/libXi/configure/configure
@@ -0,0 +1,13 @@
+CFLAGS=$SLKCFLAGS \
+CXXFLAGS=$SLKCFLAGS \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} \
+  --with-udev-rules-dir=/lib/udev/rules.d \
+  --disable-static \
+  --build=$ARCH-slackware-linux
diff --git a/patches/source/libXi/libXi.SlackBuild b/patches/source/libXi/libXi.SlackBuild
new file mode 100755
index 00000000..eea1be6d
--- /dev/null
+++ b/patches/source/libXi/libXi.SlackBuild
@@ -0,0 +1,2 @@
+UPGRADE_PACKAGES=no ./x11.SlackBuild lib libXi
+mv /tmp/x11-build/libXi*txz /tmp
diff --git a/patches/source/libXi/modularize b/patches/source/libXi/modularize
new file mode 100644
index 00000000..8a28ed93
--- /dev/null
+++ b/patches/source/libXi/modularize
@@ -0,0 +1,279 @@
+# If a package is listed here, it will be built apart from the
+# usual "grab bag" package that's made from each source directory.
+
+appres
+bdftopcf
+beforelight
+bigreqsproto
+bitmap
+compiz
+compositeproto
+damageproto
+dmxproto
+dri2proto
+dri3proto
+editres
+encodings
+evieext
+fixesproto
+font-adobe-100dpi
+font-adobe-75dpi
+font-adobe-utopia-100dpi
+font-adobe-utopia-75dpi
+font-adobe-utopia-type1
+font-alias
+font-arabic-misc
+font-bh-100dpi
+font-bh-75dpi
+font-bh-lucidatypewriter-100dpi
+font-bh-lucidatypewriter-75dpi
+font-bh-ttf
+font-bh-type1
+font-bitstream-100dpi
+font-bitstream-75dpi
+font-bitstream-speedo
+font-bitstream-type1
+font-cronyx-cyrillic
+font-cursor-misc
+font-daewoo-misc
+font-dec-misc
+font-ibm-type1
+font-isas-misc
+font-jis-misc
+font-micro-misc
+font-misc-cyrillic
+font-misc-ethiopic
+font-misc-meltho
+font-misc-misc
+font-mutt-misc
+font-schumacher-misc
+font-screen-cyrillic
+font-sony-misc
+font-sun-misc
+font-util
+font-winitzki-cyrillic
+font-xfree86-type1
+fontcacheproto
+fontsproto
+fonttosfnt
+fslsfonts
+fstobdf
+gccmakedep
+glamor-egl
+glproto
+iceauth
+ico
+imake
+inputproto
+intel-gpu-tools
+kbproto
+libFS
+libICE
+libSM
+libX11
+libXScrnSaver
+libXau
+libXaw
+libXaw3d
+libXcm
+libXcomposite
+libXcursor
+libXdamage
+libXdmcp
+libXevie
+libXext
+libXfixes
+libXfont
+libXfontcache
+libXft
+libXi
+libXinerama
+libXmu
+libXp
+libXpm
+libXpresent
+libXrandr
+libXrender
+libXres
+libXt
+libXtst
+libXv
+libXvMC
+libXxf86dga
+libXxf86misc
+libXxf86vm
+libdmx
+libfontenc
+libpciaccess
+libpthread-stubs
+libxcb
+libxkbfile
+libxshmfence
+listres
+lndir
+luit
+makedepend
+mkcomposecache
+mkfontdir
+mkfontscale
+oclock
+pixman
+presentproto
+printproto
+randrproto
+recordproto
+rendercheck
+renderproto
+resourceproto
+rgb
+scrnsaverproto
+sessreg
+setxkbmap
+showfont
+smproxy
+transset
+twm
+util-macros
+videoproto
+viewres
+x11perf
+xauth
+xbacklight
+xbiff
+xbitmaps
+xcalc
+xcb-proto
+xcb-util
+xcb-util-cursor
+xcb-util-errors
+xcb-util-image
+xcb-util-keysyms
+xcb-util-renderutil
+xcb-util-wm
+xclipboard
+xclock
+xcm
+xcmiscproto
+xcmsdb
+xcompmgr
+xconsole
+xcursor-themes
+xcursorgen
+xdbedizzy
+xditview
+xdm
+xdpyinfo
+xdriinfo
+xedit
+xev
+xextproto
+xeyes
+xf86-input-acecad
+xf86-input-aiptek
+xf86-input-evdev
+xf86-input-joystick
+xf86-input-keyboard
+xf86-input-mouse
+xf86-input-penmount
+xf86-input-synaptics
+xf86-input-vmmouse
+xf86-input-void
+xf86-input-wacom
+xf86-video-amdgpu
+xf86-video-apm
+xf86-video-ark
+xf86-video-ast
+xf86-video-ati
+xf86-video-chips
+xf86-video-cirrus
+xf86-video-dummy
+xf86-video-geode
+xf86-video-glint
+xf86-video-i128
+xf86-video-i740
+xf86-video-intel
+xf86-video-mach64
+xf86-video-mga
+xf86-video-modesetting
+xf86-video-neomagic
+xf86-video-nouveau
+xf86-video-nv
+xf86-video-omap
+xf86-video-openchrome
+xf86-video-qxl
+xf86-video-r128
+xf86-video-rendition
+xf86-video-s3
+xf86-video-s3virge
+xf86-video-savage
+xf86-video-siliconmotion
+xf86-video-sis
+xf86-video-sisusb
+xf86-video-tdfx
+xf86-video-tga
+xf86-video-trident
+xf86-video-tseng
+xf86-video-v4l
+xf86-video-vesa
+xf86-video-vmware
+xf86-video-voodoo
+xf86-video-xgi
+xf86-video-xgixp
+xf86bigfontproto
+xf86dga
+xf86dgaproto
+xf86driproto
+xf86miscproto
+xf86vidmodeproto
+xfd
+xfontsel
+xfs
+xfsinfo
+xgamma
+xgc
+xhost
+xineramaproto
+xinit
+xinput
+xkbcomp
+xkbevd
+xkbprint
+xkbutils
+xkeyboard-config
+xkill
+xload
+xlogo
+xlsatoms
+xlsclients
+xlsfonts
+xmag
+xman
+xmessage
+xmh
+xmodmap
+xmore
+xorg-cf-files
+xorg-docs
+xorg-server
+xorg-server-xephyr
+xorg-server-xnest
+xorg-server-xvfb
+xorg-sgml-doctools
+xpr
+xprop
+xproto
+xpyb
+xrandr
+xrdb
+xrefresh
+xscope
+xset
+xsetroot
+xsm
+xstdcmap
+xtrans
+xvidtune
+xvinfo
+xwd
+xwininfo
+xwud
diff --git a/patches/source/libXi/noarch b/patches/source/libXi/noarch
new file mode 100644
index 00000000..8785ee52
--- /dev/null
+++ b/patches/source/libXi/noarch
@@ -0,0 +1,75 @@
+# List packages with an $ARCH of "noarch" (i.e. packages
+# that contain no binaries) here:
+bigreqsproto
+compositeproto
+damageproto
+dejavu-ttf
+dmxproto
+encodings
+evieext
+font-adobe-100dpi
+font-adobe-75dpi
+font-adobe-utopia-100dpi
+font-adobe-utopia-75dpi
+font-adobe-utopia-type1
+font-alias
+font-arabic-misc
+font-bh-100dpi
+font-bh-75dpi
+font-bh-lucidatypewriter-100dpi
+font-bh-lucidatypewriter-75dpi
+font-bh-ttf
+font-bh-type1
+font-bitstream-100dpi
+font-bitstream-75dpi
+font-bitstream-speedo
+font-bitstream-type1
+font-cronyx-cyrillic
+font-cursor-misc
+font-daewoo-misc
+font-dec-misc
+font-ibm-type1
+font-isas-misc
+font-jis-misc
+font-micro-misc
+font-misc-cyrillic
+font-misc-ethiopic
+font-misc-meltho
+font-misc-misc
+font-mutt-misc
+font-schumacher-misc
+font-screen-cyrillic
+font-sony-misc
+font-sun-misc
+font-winitzki-cyrillic
+font-xfree86-type1
+fontcacheproto
+fontsproto
+gccmakedep
+glproto
+inputproto
+kbproto
+libpthread-stubs
+mkfontdir
+printproto
+randrproto
+recordproto
+renderproto
+resourceproto
+scrnsaverproto
+ttf-indic-fonts
+util-macros
+videoproto
+x11-skel
+xcmiscproto
+xcursor-themes
+xf86bigfontproto
+xf86dgaproto
+xf86driproto
+xf86miscproto
+xf86vidmodeproto
+xineramaproto
+xkeyboard-config
+xorg-docs
+xproto
+xtrans
diff --git a/patches/source/libXi/package-blacklist b/patches/source/libXi/package-blacklist
new file mode 100644
index 00000000..603b8c31
--- /dev/null
+++ b/patches/source/libXi/package-blacklist
@@ -0,0 +1,44 @@
+# Enter packages to skip (perhaps because they aren't used on
+# this platform) below.  Just the package name -- no version
+# number is needed.
+
+# ARM only packages:
+# They also say in the README for this one that it is not yet ready:
+xf86-video-omap
+
+# MacOS related packages:
+applewmproto
+windowswmproto
+libAppleWM
+libWindowsWM
+
+# Sun video cards:
+xf86-video-sunbw2
+xf86-video-suncg14
+xf86-video-suncg3
+xf86-video-suncg6
+xf86-video-sunffb
+xf86-video-sunleo
+xf86-video-suntcx
+
+# Obsolete packages:
+liboldX
+xf86-video-amd
+xf86-video-via
+xkbdata
+xphelloworld
+xrx
+xf86-video-modesetting
+
+# Not applicable to us
+grandr
+constype
+
+# CAREFUL NOT TO "SHIP" THE STUFF BELOW IN THE MAIN X PACKAGES DIR!
+
+# This is probably obsolete, and kills "X -configure" too
+xf86-video-nsc
+
+# We don't want this one, as it causes failure of X with no xorg.conf
+xf86-video-fbdev
+
diff --git a/patches/source/libXi/slack-desc/libXi b/patches/source/libXi/slack-desc/libXi
new file mode 100644
index 00000000..4585f82e
--- /dev/null
+++ b/patches/source/libXi/slack-desc/libXi
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+libXi: libXi (library for the X Input Extension)
+libXi:
+libXi: libXi is part of X11.
+libXi:
+libXi: For more information about the X.Org Foundation (the providers of the
+libXi: X.Org implementation of the X Window System), see their website:
+libXi:
+libXi: http://www.x.org
+libXi:
+libXi:
+libXi:
diff --git a/patches/source/libXi/slack-desc/libXinerama b/patches/source/libXi/slack-desc/libXinerama
new file mode 100644
index 00000000..3b16b81f
--- /dev/null
+++ b/patches/source/libXi/slack-desc/libXinerama
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+libXinerama: libXinerama (library for Xinerama extension to X11 Protocol)
+libXinerama:
+libXinerama: libXinerama is part of X11.
+libXinerama:
+libXinerama: For more information about the X.Org Foundation (the providers of the
+libXinerama: X.Org implementation of the X Window System), see their website:
+libXinerama:
+libXinerama: http://www.x.org
+libXinerama:
+libXinerama:
+libXinerama:
diff --git a/patches/source/libXi/x11.SlackBuild b/patches/source/libXi/x11.SlackBuild
new file mode 100755
index 00000000..c3887dff
--- /dev/null
+++ b/patches/source/libXi/x11.SlackBuild
@@ -0,0 +1,381 @@
+#!/bin/sh
+# Copyright 2007-2014  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# To build only a single package group, specify it as $1, like:
+# ./x11.SlackBuild lib
+# To build only a single package, specify both the source directory
+# and the name of the package, like:
+# ./x11.SlackBuild lib libX11
+
+# Upgrade packages as they are built.
+# Default is to upgrade new packages (UPGRADE_PACKAGES=yes).
+# To install ALL newly built packages (even if they are already installed),
+# use UPGRADE_PACKAGES=always
+# To not upgrade, pass UPGRADE_PACKAGES=no
+UPGRADE_PACKAGES=${UPGRADE_PACKAGES:-yes}
+
+pkgbase() {
+  PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev)
+  case $PKGEXT in
+  'gz' )
+    PKGRETURN=$(basename $1 .tar.gz)
+    ;;
+  'bz2' )
+    PKGRETURN=$(basename $1 .tar.bz2)
+    ;;
+  'lzma' )
+    PKGRETURN=$(basename $1 .tar.lzma)
+    ;;
+  'xz' )
+    PKGRETURN=$(basename $1 .tar.xz)
+    ;;
+  *)
+    PKGRETURN=$(basename $1)
+    ;;
+  esac
+  echo $PKGRETURN
+}
+
+# Set initial variables:
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# A lot of this stuff just controls the package names this time:
+VERSION=${VERSION:-7.5}
+BUILD=${BUILD:-1}
+PKGARCH=$ARCH
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+else
+  LIBDIRSUFFIX=""
+fi
+
+# Set up a few useful functions:
+
+fix_perms() {
+  chown -R root:root .
+  find . \
+   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+   -exec chmod 755 {} \; -o \
+   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+   -exec chmod 644 {} \;
+}
+
+process_man_pages() {
+  # Compress and if needed symlink the man pages:
+  if [ -d usr/man ]; then
+    ( cd usr/man
+      for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+      done
+    )
+  fi
+}
+
+process_info_pages() {
+  # Compress info pages and purge "dir" file from the package:
+  if [ -d usr/info ]; then
+    ( cd usr/info
+      rm -f dir
+      gzip -9 *
+    )
+  fi
+}
+
+no_usr_share_doc() {
+  # If there are docs, move them:
+  if [ -d usr/share/doc ]; then
+    mkdir -p usr/doc
+    mv usr/share/doc/* usr/doc
+    rmdir usr/share/doc
+  fi
+}
+
+# Set the compile options for the $ARCH being used:
+. $CWD/arch.use.flags
+
+SLACK_X_BUILD_DIR=$TMP/x11-build
+mkdir -p $SLACK_X_BUILD_DIR
+
+# Better have some binaries installed first, as this may not be
+# in the "magic order".  I built mine by hand through trial-and-error
+# before getting this script to work.  It wasn't that hard...  I think.  ;-)
+( cd src
+  for x_source_dir in proto data util xcb lib app doc xserver driver font ; do
+    # See if $1 is a source directory like "lib":
+    if [ ! -z "$1" ]; then
+      if [ ! "$1" = "${x_source_dir}" ]; then
+        continue
+      fi
+    fi
+    PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir}
+    rm -rf $PKG
+    mkdir -p $PKG
+    ( cd $x_source_dir
+      for x_pkg in *.tar.?z* ; do
+        # Reset $PKGARCH to its initial value:
+        PKGARCH=$ARCH
+        PKGNAME=$(echo $x_pkg | rev | cut -f 2- -d - | rev)
+        # Perhaps $PKGARCH should be something different:
+        if grep -wq "^$PKGNAME" ${CWD}/noarch ; then
+          PKGARCH=noarch
+        fi 
+        if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then
+          continue
+        fi
+        cd $SLACK_X_BUILD_DIR
+        # If $2 is set, we only want to build one package:
+        if [ ! -z "$2" ]; then
+          if [ "$2" = "$PKGNAME" ]; then
+            # Set $PKG to a private dir for the modular package build:
+            PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME
+            rm -rf $PKG
+            mkdir -p $PKG
+          else
+            continue
+          fi
+        else
+          echo
+          echo "Building from source ${x_pkg}"
+          echo
+        fi
+        if grep -wq "^$PKGNAME" ${CWD}/modularize ; then
+          # Set $PKG to a private dir for the modular package build:
+          PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME
+          rm -rf $PKG
+          mkdir -p $PKG
+        fi
+
+        # Let's figure out the version number on the modular package:
+        MODULAR_PACKAGE_VERSION=$(echo $x_pkg | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+
+        rm -rf $(pkgbase $x_pkg)
+        tar xf $CWD/src/${x_source_dir}/${x_pkg} || exit 1
+        cd $(pkgbase $x_pkg) || exit 1
+
+        fix_perms
+
+        # If any patches are needed, call this script to apply them:
+        if [ -r $CWD/patch/${PKGNAME}.patch ]; then
+          . $CWD/patch/${PKGNAME}.patch
+        fi
+
+        # I heard somewhere that -O2 breaks some chipset or another.  If you encounter
+        # problems, please contact volkerdi@slackware.com.  Thanks! :-)
+
+        # ./configure, using custom configure script if needed:
+        if [ -r $CWD/configure/${PKGNAME} ]; then
+          . $CWD/configure/${PKGNAME}
+        else
+          # This is the default configure script:
+          . $CWD/configure/configure
+        fi
+
+        if ! make $NUMJOBS ; then
+          touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed
+          continue
+        fi
+
+        make install DESTDIR=$PKG
+
+        mkdir -p $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
+        cp -a \
+          AUTHORS* COPYING* INSTALL* README* NEWS* TODO* \
+          $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION}
+
+        # If there's a ChangeLog, installing at least part of the recent history
+        # is useful, but don't let it get totally out of control:
+        if [ -r ChangeLog ]; then
+          DOCSDIR=$(echo $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION)
+          cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+          touch -r ChangeLog $DOCSDIR/ChangeLog
+        fi
+
+        # Get rid of zero-length junk files:
+        find $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION -type f -size 0 -exec rm --verbose "{}" \;
+        rmdir --verbose $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION 2> /dev/null
+   
+        # Strip binaries:
+        ( cd $PKG
+          find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+          find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+          find . | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
+        )
+
+        # If there's any special post-install things to do, do them:
+        if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then
+          RUNSCRIPT=$(mktemp -p $TMP) || exit 1
+          cat $CWD/post-install/${PKGNAME}.post-install \
+            | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT
+          . $RUNSCRIPT
+          rm -f $RUNSCRIPT
+        fi
+
+        # If this package requires some doinst.sh material, add it here:
+        if [ -r $CWD/doinst.sh/${PKGNAME} ]; then
+          mkdir -p $PKG/install
+          cat $CWD/doinst.sh/${PKGNAME} \
+            | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+            >> $PKG/install/doinst.sh
+        fi
+
+        # If this is a modular package, build it here:
+        if [ -d $SLACK_X_BUILD_DIR/package-$PKGNAME ]; then
+          cd $PKG
+          process_man_pages
+          process_info_pages
+          no_usr_share_doc          
+          mkdir -p $PKG/install
+          if [ -r $CWD/slack-desc/${PKGNAME} ]; then
+            cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc
+          else
+            touch $PKG/install/slack-desc-missing
+          fi
+          if [ -r $CWD/build/${PKGNAME} ]; then
+            MODBUILD=$(cat $CWD/build/${PKGNAME})
+          else
+            MODBUILD=$BUILD
+          fi
+          if [ -r $CWD/makepkg/${PKGNAME} ]; then
+            BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
+          else
+            /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz
+            if [ "$UPGRADE_PACKAGES" = "yes" ]; then
+              /sbin/upgradepkg --install-new ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz
+            elif [ "$UPGRADE_PACKAGES" = "always" ]; then
+              /sbin/upgradepkg --install-new --reinstall ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz
+            fi
+          fi
+        fi
+
+        # Reset $PKG to assume we're building the whole source dir:
+        PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir}
+
+      done
+
+      # Nothing here?  Must have been fully modular. :-)
+      if [ ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/etc -a \
+        ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/usr ]; then
+        continue
+      fi
+
+      # Build an "x11-<sourcedir>" package for anything that wasn't built modular:
+      # It's safer to consider these to have binaries in them. ;-)
+      PKGARCH=$ARCH
+      cd $PKG
+      process_man_pages
+      process_info_pages
+      no_usr_share_doc
+      # If there are post-install things to do for the combined package,
+      # we do them here.  This could be used for things like making a
+      # VERSION number for a combined package.  :-)
+      if [ -r $CWD/post-install/x11-${x_source_dir}.post-install ]; then
+        RUNSCRIPT=$(mktemp -p $TMP) || exit 1
+        cat $CWD/post-install/x11-${x_source_dir}.post-install \
+          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT
+        . $RUNSCRIPT
+        rm -f $RUNSCRIPT
+      fi
+      mkdir -p $PKG/install
+      if [ -r $CWD/slack-desc/x11-${x_source_dir} ]; then
+        cat $CWD/slack-desc/x11-${x_source_dir} > $PKG/install/slack-desc
+      else
+        touch $PKG/install/slack-desc-missing
+      fi
+      if [ -r $CWD/doinst.sh/x11-${x_source_dir} ]; then
+        cat $CWD/doinst.sh/x11-${x_source_dir} \
+          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+          >> $PKG/install/doinst.sh
+      fi
+      if [ -r $CWD/build/x11-${PKGNAME} ]; then
+        SRCDIRBUILD=$(cat $CWD/build/x11-${PKGNAME})
+      else
+        SRCDIRBUILD=$BUILD
+      fi
+      if [ -r $CWD/makepkg/${PKGNAME} ]; then
+        BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
+      else
+        /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz
+        if [ "$UPGRADE_PACKAGES" = "yes" ]; then
+          /sbin/upgradepkg --install-new ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz
+        elif [ "$UPGRADE_PACKAGES" = "always" ]; then
+          /sbin/upgradepkg --install-new --reinstall ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz
+        fi
+      fi
+    )
+  done
+)
+
+exit 0
+
+# I don't think I'll be using the following stuff, since I went for the latest in
+# "individual", rather than a release.  That was mostly because version 7.1 depends
+# on a version of Mesa that won't build against kernel headers this new (&etc.).
+
+# If environment variable "REFRESH" is exported, start by refreshing the source tree:
+# export REFRESH yes
+if [ ! -z "$REFRESH" ]; then
+  # Only works once, unless you uncomment above.
+  unset REFRESH
+  ( cd patches
+    lftp -c \
+    "lftp ftp://ftp.x.org:/pub/X11R7.1/patches
+     mirror --delete --dereference .
+     exit"
+    chmod 644 *
+  )
+  ( cd src
+    mkdir -p update everything
+    for dir in app data deprecated doc driver extras font lib proto util xserver ; do
+      # We won't really download "update", as problems ensue.  Plus, --dereference is
+      # bringing us updated files when needed, so it's redundant (like "everything").
+      if [ ! -d $dir ]; then
+        mkdir $dir
+      fi
+      ( cd $dir
+        lftp -c \
+        "lftp ftp://ftp.x.org:/pub/X11R7.1/src/$dir
+         mirror -c --delete --dereference --include-glob "*.tar.bz2" .
+         exit"
+        chmod 644 *
+      )
+    done
+  )
+fi
+