Sat Aug 1 19:08:49 UTC 202020200801190849

a/cryptsetup-2.3.3-x86_64-2.txz:  Rebuilt.
  Recompiled against json-c-0.15_20200726.
l/imagemagick-7.0.10_25-x86_64-1.txz:  Upgraded.
l/json-c-0.15_20200726-x86_64-1.txz:  Upgraded.
  Shared library .so-version bump.
l/urwid-1.0.3-x86_64-5.txz:  Removed.
  This is an ancient version that was only used by wicd.
n/bind-9.16.5-x86_64-2.txz:  Rebuilt.
  Recompiled against json-c-0.15_20200726.
x/libmypaint-1.6.1-x86_64-2.txz:  Rebuilt.
  Recompiled against json-c-0.15_20200726.
xap/gimp-2.10.20-x86_64-2.txz:  Rebuilt.
  Recompiled against json-c-0.15_20200726.
extra/wicd/wicd-1.7.4-x86_64-3.txz:  Removed.
  This is unmaintained, possibly insecure, and doesn't work with Python
  versions newer than 2.7.18. NetworkManager is a better choice these days.

10 files changed, 0 insertions, 315 deletions

diff --git a/extra/source/wicd/README.SLACKWARE b/extra/source/wicd/README.SLACKWARE
deleted file mode 100644
index e7a374dc..00000000
--- a/extra/source/wicd/README.SLACKWARE
+++ /dev/null
@@ -1,17 +0,0 @@
-After installing this package, make sure the /etc/rc.d/rc.wicd
-script is executable; if necessary, do:
-  chmod +x /etc/rc.d/rc.wicd
-
-Results have varied, but you will probably need/want to remove
-any references to interfaces from /etc/rc.d/rc.inet1.conf - in
-other words, make that file look as if netconfig has never been
-run.
-
-When you start X, you should see a wicd icon in the system tray;
-click on it to open the gui interface and configure as desired.
-Your user account will need to be a member of the 'netdev' group 
-in order to use wicd.
-
-Note that urwid will need to be installed if you want to use the 
-curses client.  Also, if you don't have kde installed, you won't 
-have a graphical sudo client available.
diff --git a/extra/source/wicd/curses_bitrate_fix.patch b/extra/source/wicd/curses_bitrate_fix.patch
deleted file mode 100644
index 1efa0c84..00000000
--- a/extra/source/wicd/curses_bitrate_fix.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- curses/netentry_curses.py   2015-02-15 18:29:05.000000000 +0100
-+++ curses/netentry_curses.py   2015-02-15 18:31:24.000000000 +0100
-@@ -538,11 +538,12 @@
-         self.bitrates = wireless.GetAvailableBitrates()
-         self.bitrates.append('auto')
-         self.bitrate_combo.set_list(self.bitrates)
--        self.bitrate_combo.set_focus(
--            self.bitrates.index(
--                wireless.GetWirelessProperty(networkID, 'bitrate')
-+        if wireless.GetWirelessProperty(networkID, 'bitrate'):
-+            self.bitrate_combo.set_focus(
-+                self.bitrates.index(
-+                    wireless.GetWirelessProperty(networkID, 'bitrate')
-+                )
-             )
--        )
-         self.allow_lower_bitrates_chkbox.set_state(
-             to_bool(self.format_entry(networkID, 'allow_lower_bitrates'))
-         )
diff --git a/extra/source/wicd/doinst.sh b/extra/source/wicd/doinst.sh
deleted file mode 100644
index 78732c5b..00000000
--- a/extra/source/wicd/doinst.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.wicd.new:
-if [ -e etc/rc.d/rc.wicd ]; then
-  cp -a etc/rc.d/rc.wicd etc/rc.d/rc.wicd.new.incoming
-  cat etc/rc.d/rc.wicd.new > etc/rc.d/rc.wicd.new.incoming
-  mv etc/rc.d/rc.wicd.new.incoming etc/rc.d/rc.wicd.new
-fi
-
-# Update desktop menu
-if [ -x /usr/bin/update-desktop-database ]; then
-  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
-fi
-
-# Update icon cache if one exists
-if [ -r usr/share/icons/hicolor/icon-theme.cache ]; then
-  if [ -x /usr/bin/gtk-update-icon-cache ]; then
-    /usr/bin/gtk-update-icon-cache -t -f usr/share/icons/hicolor >/dev/null 2>&1
-  fi
-fi
-
-config etc/dbus-1/system.d/wicd.conf.new
-config etc/rc.d/rc.wicd.new
-config etc/wicd/manager-settings.conf.new
-config etc/logrotate.d/wicd.logrotate.new
-
diff --git a/extra/source/wicd/manually-compile-translations.diff b/extra/source/wicd/manually-compile-translations.diff
deleted file mode 100644
index 56e22ce9..00000000
--- a/extra/source/wicd/manually-compile-translations.diff
+++ /dev/null
@@ -1,24 +0,0 @@
-diff -Nur wicd-1.7.3.orig/setup.py wicd-1.7.3/setup.py
---- wicd-1.7.3.orig/setup.py	2014-12-21 13:40:46.000000000 -0600
-+++ wicd-1.7.3/setup.py	2014-12-23 13:03:13.181102639 -0600
-@@ -617,9 +617,6 @@
-             import wpath
- 
-         if not wpath.no_install_i18n:
--            if os.path.exists('translations'):
--                shutil.rmtree('translations/')
--            os.makedirs('translations')
- 
-             oldlang = os.environ['LANG']
-             os.environ['LANG'] = 'C'
-@@ -652,10 +649,6 @@
-                 except (OSError, ValueError):
-                     print 'ARGH'
- 
--                if compile_po:
--                    os.makedirs('translations/' + lang + '/LC_MESSAGES/')
--                    os.system('pybabel compile -D wicd -i %s -l %s -d translations/' % (pofile, lang))
--
-             os.environ['LANG'] = oldlang
- 
- class uninstall(Command):
diff --git a/extra/source/wicd/slack-desc b/extra/source/wicd/slack-desc
deleted file mode 100644
index 33aed290..00000000
--- a/extra/source/wicd/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler-------------------------------------------------------|
-wicd: wicd (network manager for linux)
-wicd:
-wicd: wicd is a wired and wireless network manager for Linux.
-wicd: Some features include:
-wicd: - Ability to connect to wired and wireless networks
-wicd: - Profiles for each wireless network and wired network
-wicd: - Many encryption schemes, some of which include WEP/WPA/WPA2
-wicd: - Compatible with wireless-tools 
-wicd:
-wicd: Homepage: https://launchpad.net/wicd
-wicd:
diff --git a/extra/source/wicd/wicd-1.7.3-urwid-1.3.0.patch b/extra/source/wicd/wicd-1.7.3-urwid-1.3.0.patch
deleted file mode 100644
index a028059f..00000000
--- a/extra/source/wicd/wicd-1.7.3-urwid-1.3.0.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- curses/wicd-curses.py	2015-01-27 22:35:25.414781192 -0300
-+++ cursesb/wicd-curses.py	2015-01-28 01:13:48.078904587 -0300
-@@ -1153,9 +1153,10 @@
-         if not ui._started:
-             return False
- 
--        input_data = ui.get_input_nonblocking()
-+        ui.set_input_timeouts(max_wait=0)
-+        input_data = ui.get_input()
-         # Resolve any "alarms" in the waiting
--        self.handle_keys(input_data[1])
-+        self.handle_keys(input_data)
- 
-         # Update the screen
-         canvas = self.frame.render((self.size), True)
diff --git a/extra/source/wicd/wicd-1421918.patch b/extra/source/wicd/wicd-1421918.patch
deleted file mode 100644
index 2428f011..00000000
--- a/extra/source/wicd/wicd-1421918.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-=== modified file 'curses/wicd-curses.py'
---- curses/wicd-curses.py	2014-12-21 16:57:33 +0000
-+++ curses/wicd-curses.py	2015-02-24 23:41:01 +0000
-@@ -532,7 +532,10 @@
-     def get_selected_profile(self):
-         """Get the selected wired profile"""
-         loc = self.get_focus()[1]
--        return self.theList[loc]
-+        if len(self.theList) > loc:
-+            return self.theList[loc]
-+        else:
-+            return self.theList[-1]
- 
- 
- class AdHocDialog(Dialog2):
diff --git a/extra/source/wicd/wicd.SlackBuild b/extra/source/wicd/wicd.SlackBuild
deleted file mode 100755
index 97b60a2c..00000000
--- a/extra/source/wicd/wicd.SlackBuild
+++ /dev/null
@@ -1,121 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008-2015 Robby Workman, Tuscaloosa, AL, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=wicd
-VERSION=${VERSION:-1.7.4}
-BUILD=${BUILD:-3}
-
-# Automatically determine architecture for build & packaging:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-    *)    export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-$PKGNAM
-
-if [ "$ARCH" = "i586" ]; then
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  LIBDIRSUFFIX="64"
-else
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
-cd $PKGNAM-$VERSION || exit 1
-
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \+ -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \+
-
-# Bypass the need for pybabel (thanks, dapal!)
-zcat $CWD/manually-compile-translations.diff.gz | patch -p1 --verbose || exit 1
-for pofile in $(find po/ -type f -name "*.po") ; do 
-  mkdir -p translations/$(basename ${pofile} .po)/LC_MESSAGES
-  msgfmt -o translations/$(basename ${pofile} .po)/LC_MESSAGES/wicd.mo ${pofile}
-done
-
-# wicd-1.7.4 is broken with urwid > 1.0.x, even with this patch.
-# Might be useful someday, but for now since the only thing in Slackware that uses
-# urwid is wicd, just use a 1.0.x version.
-# Thanks to ArchLinux
-#zcat $CWD/wicd-1.7.3-urwid-1.3.0.patch.gz | patch -p0 --verbose || exit 1
-
-# Crash fix.  Thanks to ArchLinux.
-zcat $CWD/wicd-1421918.patch.gz | patch -p0 --verbose || exit 1
-
-# Thanks to Void Linux
-zcat $CWD/curses_bitrate_fix.patch.gz | patch -p0 --verbose || exit 1
-
-# Fix settings save crash:
-zcat $CWD/wicd.netentry_curses.py.save.settings.patch.gz | patch -p1 --verbose || exit 1
-
-python setup.py configure \
-  --lib=/usr/lib${LIBDIRSUFFIX}/wicd \
-  --kdedir=/usr/share/autostart \
-  --backends=/usr/lib${LIBDIRSUFFIX}/wicd/backends \
-  --no-install-gnome-shell-extensions \
-  || exit 1
-
-python setup.py install --root=$PKG || exit 1
-
-# Handle some Slackware defaults
-#   Use dhcpcd as the dhcp client
-#   Use kdesu as the graphical sudo application
-cat << EOF > $PKG/etc/wicd/manager-settings.conf.new
-[Settings]
-dhcp_client = 2
-sudo_app = 2
-EOF
-
-# Don't clobber configs on upgrade
-mv $PKG/etc/dbus-1/system.d/wicd.conf $PKG/etc/dbus-1/system.d/wicd.conf.new
-mv $PKG/etc/logrotate.d/wicd.logrotate $PKG/etc/logrotate.d/wicd.logrotate.new
-mv $PKG/etc/rc.d/rc.wicd $PKG/etc/rc.d/rc.wicd.new
-
-# Compress the man pages and add a bit to the package docs
-( cd $PKG/usr/man || exit 1
-  find . -type f -exec gzip -9 {} \+
-  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
-)
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PKGNAM-$VERSION/README.SLACKWARE
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -c n -l y $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/extra/source/wicd/wicd.netentry_curses.py.save.settings.patch b/extra/source/wicd/wicd.netentry_curses.py.save.settings.patch
deleted file mode 100644
index 512a467a..00000000
--- a/extra/source/wicd/wicd.netentry_curses.py.save.settings.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- ./curses/netentry_curses.py.orig	2018-03-15 12:02:07.569646094 -0500
-+++ ./curses/netentry_curses.py	2018-03-15 12:03:15.711650457 -0500
-@@ -1,4 +1,4 @@
--#!/usr/bin/env python
-+#!/usr/bin/python2
- """
-     netentry_curses -- everyone's favorite networks settings dialogs... in text
-     form!
-@@ -538,12 +538,16 @@
-         self.bitrates = wireless.GetAvailableBitrates()
-         self.bitrates.append('auto')
-         self.bitrate_combo.set_list(self.bitrates)
--        if wireless.GetWirelessProperty(networkID, 'bitrate'):
--            self.bitrate_combo.set_focus(
--                self.bitrates.index(
--                    wireless.GetWirelessProperty(networkID, 'bitrate')
--                )
--            )
-+
-+        # bitrate property is sometimes None
-+        chosen_bitrate = wireless.GetWirelessProperty(networkID, 'bitrate')
-+        if chosen_bitrate not in self.bitrates:
-+            chosen_bitrate = 'auto'
-+
-+        self.bitrate_combo.set_focus(
-+            self.bitrates.index(chosen_bitrate)
-+        )
-+
-         self.allow_lower_bitrates_chkbox.set_state(
-             to_bool(self.format_entry(networkID, 'allow_lower_bitrates'))
-         )
diff --git a/extra/wicd/README.SLACKWARE b/extra/wicd/README.SLACKWARE
deleted file mode 100644
index e7a374dc..00000000
--- a/extra/wicd/README.SLACKWARE
+++ /dev/null
@@ -1,17 +0,0 @@
-After installing this package, make sure the /etc/rc.d/rc.wicd
-script is executable; if necessary, do:
-  chmod +x /etc/rc.d/rc.wicd
-
-Results have varied, but you will probably need/want to remove
-any references to interfaces from /etc/rc.d/rc.inet1.conf - in
-other words, make that file look as if netconfig has never been
-run.
-
-When you start X, you should see a wicd icon in the system tray;
-click on it to open the gui interface and configure as desired.
-Your user account will need to be a member of the 'netdev' group 
-in order to use wicd.
-
-Note that urwid will need to be installed if you want to use the 
-curses client.  Also, if you don't have kde installed, you won't 
-have a graphical sudo client available.