diff options
| author | Patrick J Volkerding <volkerdi@slackware.com> | 2020-02-12 05:05:50 +0000 |
|---|---|---|
| committer | Eric Hameleers <alien@slackware.com> | 2020-02-12 17:59:48 +0100 |
| commit | 6a63f41b3b49b8f8f86b40166b782d907ccb2538 (patch) | |
| tree | 7d2c77a55463f5586ec453e13602ff2889030f84 | |
| parent | e1ab44f93f91f5c967ac1b7143c7a8ac287d1a52 (diff) | |
| download | current-6a63f41b3b49b8f8f86b40166b782d907ccb2538.tar.gz | |
Wed Feb 12 05:05:50 UTC 202020200212050550
Hey folks! PAM has finally landed in /testing. Some here wanted it to go
right into the main tree immediately, and in a more normal development cycle
I'd have been inclined to agree (it is -current, after all). But it's
probably better for it to appear in /testing first, to make sure we didn't
miss any bugs and also to serve as a warning shot that we'll be shaking up
the tree pretty good over the next few weeks. I'd like to see this merged
into the main tree in a day or two, so any testing is greatly appreciated.
Switching to the PAM packages (or reverting from them) is as easy as
installing all of them with upgradepkg --install-new, and if reverting then
remove the three leftover _pam packages. After reverting, a bit of residue
will remain in /etc/pam.d/ and /etc/security/ which can either be manually
deleted or simply ignored. While there are many more features available in
PAM compared with plain shadow, out of the box about the only noticable
change is the use of cracklib and libpwquality to check the quality of a
user-supplied password. Hopefully having PAM and krb5 will get us on track
to having proper Active Directory integration as well as using code paths
that are likely better audited these days. The attack surface *might* be
bigger, but it's also a lot better scrutinized.
Thanks to Robby Workman and Vincent Batts who did most of the initial heavy
lifting on the core PAM packages as a side project for many years. Thanks
also to Phantom X whose PAM related SlackBuilds were a valuable reference.
And thanks as well to ivandi - I learned a lot from the SlackMATE build
scripts and was even occasionally thankful for the amusing ways you would
kick my ass on LQ. ;-) You're more than welcome to let us know where we've
messed up this time.
The binutils and glibc packages in /testing were removed and are off the
table for now. I'm not seeing much upside to heading down that rabbit hole
at the moment. Next we need to be looking at Xfce 4.14 and Plasma 5.18 LTS
and some other things that have been held back since KDE4 couldn't use them.
Cheers! :-)
a/kernel-generic-5.4.19-x86_64-1.txz: Upgraded.
a/kernel-huge-5.4.19-x86_64-1.txz: Upgraded.
a/kernel-modules-5.4.19-x86_64-1.txz: Upgraded.
a/lvm2-2.03.08-x86_64-1.txz: Upgraded.
a/shadow-4.8.1-x86_64-2.txz: Rebuilt.
Automatically backup /etc/login.defs and install the new version if
incompatible PAM options are detected.
d/kernel-headers-5.4.19-x86-1.txz: Upgraded.
k/kernel-source-5.4.19-noarch-1.txz: Upgraded.
VALIDATE_FS_PARSER y -> n
xap/mozilla-thunderbird-68.5.0-x86_64-1.txz: Upgraded.
This release contains security fixes and improvements.
For more information, see:
https://www.mozilla.org/en-US/thunderbird/68.5.0/releasenotes/
https://www.mozilla.org/en-US/security/advisories/mfsa2020-07/
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6793
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6794
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6795
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6792
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800
(* Security fix *)
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz: Added.
testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz: Added.
testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz: Added.
testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz: Added.
testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz: Added.
testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz: Added.
testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz: Added.
testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz: Added.
testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz: Added.
testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz: Added.
testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz: Added.
testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz: Added.
testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz: Added.
testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz: Added.
testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz: Added.
testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz: Added.
testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz: Added.
testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz: Added.
testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz: Added.
testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz: Added.
testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz: Added.
testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz: Added.
testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz: Added.
testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz: Added.
testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz: Added.
testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz: Added.
testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz: Added.
testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz: Added.
testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz: Added.
testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz: Added.
testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz: Added.
testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz: Added.
testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz: Added.
testing/packages/binutils-2.34-x86_64-1.txz: Removed.
testing/packages/glibc-2.31-x86_64-1.txz: Removed.
testing/packages/glibc-i18n-2.31-x86_64-1.txz: Removed.
testing/packages/glibc-profile-2.31-x86_64-1.txz: Removed.
testing/packages/glibc-solibs-2.31-x86_64-1.txz: Removed.
usb-and-pxe-installers/usbboot.img: Rebuilt.
113 files changed, 4865 insertions, 2178 deletions
diff --git a/ChangeLog.rss b/ChangeLog.rss index 9c3aaa16..8f858025 100644 --- a/ChangeLog.rss +++ b/ChangeLog.rss @@ -11,10 +11,114 @@ <description>Tracking Slackware development in git.</description> <language>en-us</language> <id xmlns="http://www.w3.org/2005/Atom">urn:uuid:c964f45e-6732-11e8-bbe5-107b4450212f</id> - <pubDate>Tue, 11 Feb 2020 04:45:36 GMT</pubDate> - <lastBuildDate>Tue, 11 Feb 2020 07:59:42 GMT</lastBuildDate> + <pubDate>Wed, 12 Feb 2020 05:05:50 GMT</pubDate> + <lastBuildDate>Wed, 12 Feb 2020 16:59:42 GMT</lastBuildDate> <generator>maintain_current_git.sh v 1.11</generator> <item> + <title>Wed, 12 Feb 2020 05:05:50 GMT</title> + <pubDate>Wed, 12 Feb 2020 05:05:50 GMT</pubDate> + <link>https://git.slackware.nl/current/tag/?h=20200212050550</link> + <guid isPermaLink="false">20200212050550</guid> + <description> + <![CDATA[<pre> +Hey folks! PAM has finally landed in /testing. Some here wanted it to go +right into the main tree immediately, and in a more normal development cycle +I'd have been inclined to agree (it is -current, after all). But it's +probably better for it to appear in /testing first, to make sure we didn't +miss any bugs and also to serve as a warning shot that we'll be shaking up +the tree pretty good over the next few weeks. I'd like to see this merged +into the main tree in a day or two, so any testing is greatly appreciated. +Switching to the PAM packages (or reverting from them) is as easy as +installing all of them with upgradepkg --install-new, and if reverting then +remove the three leftover _pam packages. After reverting, a bit of residue +will remain in /etc/pam.d/ and /etc/security/ which can either be manually +deleted or simply ignored. While there are many more features available in +PAM compared with plain shadow, out of the box about the only noticable +change is the use of cracklib and libpwquality to check the quality of a +user-supplied password. Hopefully having PAM and krb5 will get us on track +to having proper Active Directory integration as well as using code paths +that are likely better audited these days. The attack surface *might* be +bigger, but it's also a lot better scrutinized. +Thanks to Robby Workman and Vincent Batts who did most of the initial heavy +lifting on the core PAM packages as a side project for many years. Thanks +also to Phantom X whose PAM related SlackBuilds were a valuable reference. +And thanks as well to ivandi - I learned a lot from the SlackMATE build +scripts and was even occasionally thankful for the amusing ways you would +kick my ass on LQ. ;-) You're more than welcome to let us know where we've +messed up this time. +The binutils and glibc packages in /testing were removed and are off the +table for now. I'm not seeing much upside to heading down that rabbit hole +at the moment. Next we need to be looking at Xfce 4.14 and Plasma 5.18 LTS +and some other things that have been held back since KDE4 couldn't use them. +Cheers! :-) +a/kernel-generic-5.4.19-x86_64-1.txz: Upgraded. +a/kernel-huge-5.4.19-x86_64-1.txz: Upgraded. +a/kernel-modules-5.4.19-x86_64-1.txz: Upgraded. +a/lvm2-2.03.08-x86_64-1.txz: Upgraded. +a/shadow-4.8.1-x86_64-2.txz: Rebuilt. + Automatically backup /etc/login.defs and install the new version if + incompatible PAM options are detected. +d/kernel-headers-5.4.19-x86-1.txz: Upgraded. +k/kernel-source-5.4.19-noarch-1.txz: Upgraded. + VALIDATE_FS_PARSER y -> n +xap/mozilla-thunderbird-68.5.0-x86_64-1.txz: Upgraded. + This release contains security fixes and improvements. + For more information, see: + https://www.mozilla.org/en-US/thunderbird/68.5.0/releasenotes/ + https://www.mozilla.org/en-US/security/advisories/mfsa2020-07/ + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6793 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6794 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6795 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6792 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800 + (* Security fix *) +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz: Added. +testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz: Added. +testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz: Added. +testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz: Added. +testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz: Added. +testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz: Added. +testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz: Added. +testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz: Added. +testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz: Added. +testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz: Added. +testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz: Added. +testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz: Added. +testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz: Added. +testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz: Added. +testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz: Added. +testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz: Added. +testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz: Added. +testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz: Added. +testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz: Added. +testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz: Added. +testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz: Added. +testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz: Added. +testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz: Added. +testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz: Added. +testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz: Added. +testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz: Added. +testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz: Added. +testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz: Added. +testing/packages/binutils-2.34-x86_64-1.txz: Removed. +testing/packages/glibc-2.31-x86_64-1.txz: Removed. +testing/packages/glibc-i18n-2.31-x86_64-1.txz: Removed. +testing/packages/glibc-profile-2.31-x86_64-1.txz: Removed. +testing/packages/glibc-solibs-2.31-x86_64-1.txz: Removed. +usb-and-pxe-installers/usbboot.img: Rebuilt. + </pre>]]> + </description> + </item> + <item> <title>Tue, 11 Feb 2020 04:45:36 GMT</title> <pubDate>Tue, 11 Feb 2020 04:45:36 GMT</pubDate> <link>https://git.slackware.nl/current/tag/?h=20200211044536</link> @@ -27,9 +131,16 @@ ap/man-pages-5.05-noarch-2.txz: Rebuilt. d/python-setuptools-45.2.0-x86_64-1.txz: Upgraded. n/nfs-utils-2.4.3-x86_64-1.txz: Upgraded. xap/mozilla-firefox-68.5.0esr-x86_64-1.txz: Upgraded. - This is a bugfix release. + This release contains security fixes and improvements. For more information, see: https://www.mozilla.org/en-US/firefox/68.5.0/releasenotes/ + https://www.mozilla.org/security/advisories/mfsa2020-06/ + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6796 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6799 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800 + (* Security fix *) </pre>]]> </description> </item> diff --git a/ChangeLog.txt b/ChangeLog.txt index b44af413..d6f335c0 100644 --- a/ChangeLog.txt +++ b/ChangeLog.txt @@ -1,3 +1,99 @@ +Wed Feb 12 05:05:50 UTC 2020 +Hey folks! PAM has finally landed in /testing. Some here wanted it to go +right into the main tree immediately, and in a more normal development cycle +I'd have been inclined to agree (it is -current, after all). But it's +probably better for it to appear in /testing first, to make sure we didn't +miss any bugs and also to serve as a warning shot that we'll be shaking up +the tree pretty good over the next few weeks. I'd like to see this merged +into the main tree in a day or two, so any testing is greatly appreciated. +Switching to the PAM packages (or reverting from them) is as easy as +installing all of them with upgradepkg --install-new, and if reverting then +remove the three leftover _pam packages. After reverting, a bit of residue +will remain in /etc/pam.d/ and /etc/security/ which can either be manually +deleted or simply ignored. While there are many more features available in +PAM compared with plain shadow, out of the box about the only noticable +change is the use of cracklib and libpwquality to check the quality of a +user-supplied password. Hopefully having PAM and krb5 will get us on track +to having proper Active Directory integration as well as using code paths +that are likely better audited these days. The attack surface *might* be +bigger, but it's also a lot better scrutinized. +Thanks to Robby Workman and Vincent Batts who did most of the initial heavy +lifting on the core PAM packages as a side project for many years. Thanks +also to Phantom X whose PAM related SlackBuilds were a valuable reference. +And thanks as well to ivandi - I learned a lot from the SlackMATE build +scripts and was even occasionally thankful for the amusing ways you would +kick my ass on LQ. ;-) You're more than welcome to let us know where we've +messed up this time. +The binutils and glibc packages in /testing were removed and are off the +table for now. I'm not seeing much upside to heading down that rabbit hole +at the moment. Next we need to be looking at Xfce 4.14 and Plasma 5.18 LTS +and some other things that have been held back since KDE4 couldn't use them. +Cheers! :-) +a/kernel-generic-5.4.19-x86_64-1.txz: Upgraded. +a/kernel-huge-5.4.19-x86_64-1.txz: Upgraded. +a/kernel-modules-5.4.19-x86_64-1.txz: Upgraded. +a/lvm2-2.03.08-x86_64-1.txz: Upgraded. +a/shadow-4.8.1-x86_64-2.txz: Rebuilt. + Automatically backup /etc/login.defs and install the new version if + incompatible PAM options are detected. +d/kernel-headers-5.4.19-x86-1.txz: Upgraded. +k/kernel-source-5.4.19-noarch-1.txz: Upgraded. + VALIDATE_FS_PARSER y -> n +xap/mozilla-thunderbird-68.5.0-x86_64-1.txz: Upgraded. + This release contains security fixes and improvements. + For more information, see: + https://www.mozilla.org/en-US/thunderbird/68.5.0/releasenotes/ + https://www.mozilla.org/en-US/security/advisories/mfsa2020-07/ + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6793 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6794 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6795 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6792 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800 + (* Security fix *) +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz: Added. +testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz: Added. +testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz: Added. +testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz: Added. +testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz: Added. +testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz: Added. +testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz: Added. +testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz: Added. +testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz: Added. +testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz: Added. +testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz: Added. +testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz: Added. +testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz: Added. +testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz: Added. +testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz: Added. +testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz: Added. +testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz: Added. +testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz: Added. +testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz: Added. +testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz: Added. +testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz: Added. +testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz: Added. +testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz: Added. +testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz: Added. +testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz: Added. +testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz: Added. +testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz: Added. +testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz: Added. +testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz: Added. +testing/packages/binutils-2.34-x86_64-1.txz: Removed. +testing/packages/glibc-2.31-x86_64-1.txz: Removed. +testing/packages/glibc-i18n-2.31-x86_64-1.txz: Removed. +testing/packages/glibc-profile-2.31-x86_64-1.txz: Removed. +testing/packages/glibc-solibs-2.31-x86_64-1.txz: Removed. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ Tue Feb 11 04:45:36 UTC 2020 ap/man-pages-5.05-noarch-2.txz: Rebuilt. Clean up /usr/man directory moving miscellaneous documentation to @@ -5,9 +101,16 @@ ap/man-pages-5.05-noarch-2.txz: Rebuilt. d/python-setuptools-45.2.0-x86_64-1.txz: Upgraded. n/nfs-utils-2.4.3-x86_64-1.txz: Upgraded. xap/mozilla-firefox-68.5.0esr-x86_64-1.txz: Upgraded. - This is a bugfix release. + This release contains security fixes and improvements. For more information, see: https://www.mozilla.org/en-US/firefox/68.5.0/releasenotes/ + https://www.mozilla.org/security/advisories/mfsa2020-06/ + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6796 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6799 + https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800 + (* Security fix *) +--------------------------+ Sun Feb 9 23:04:46 UTC 2020 ap/man-pages-5.05-noarch-1.txz: Upgraded. diff --git a/FILELIST.TXT b/FILELIST.TXT index 4b608731..d2e3a182 100644 --- a/FILELIST.TXT +++ b/FILELIST.TXT @@ -1,35 +1,35 @@ -Tue Feb 11 05:02:21 UTC 2020 +Wed Feb 12 05:21:26 UTC 2020 Here is the file list for this directory. If you are using a mirror site and find missing or extra files in the disk subdirectories, please have the archive administrator refresh the mirror. -drwxr-xr-x 12 root root 4096 2020-02-11 04:45 . +drwxr-xr-x 12 root root 4096 2020-02-12 05:05 . -rw-r--r-- 1 root root 10064 2016-06-30 18:39 ./ANNOUNCE.14_2 -rw-r--r-- 1 root root 14975 2020-02-08 21:06 ./CHANGES_AND_HINTS.TXT --rw-r--r-- 1 root root 941648 2020-02-09 23:17 ./CHECKSUMS.md5 --rw-r--r-- 1 root root 163 2020-02-09 23:17 ./CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 941564 2020-02-11 05:02 ./CHECKSUMS.md5 +-rw-r--r-- 1 root root 163 2020-02-11 05:02 ./CHECKSUMS.md5.asc -rw-r--r-- 1 root root 17976 1994-06-10 02:28 ./COPYING -rw-r--r-- 1 root root 35147 2007-06-30 04:21 ./COPYING3 -rw-r--r-- 1 root root 19573 2016-06-23 20:08 ./COPYRIGHT.TXT -rw-r--r-- 1 root root 616 2006-10-02 04:37 ./CRYPTO_NOTICE.TXT --rw-r--r-- 1 root root 795706 2020-02-11 04:45 ./ChangeLog.txt +-rw-r--r-- 1 root root 801922 2020-02-12 05:05 ./ChangeLog.txt drwxr-xr-x 3 root root 4096 2013-03-20 22:17 ./EFI -drwxr-xr-x 2 root root 4096 2020-02-06 01:59 ./EFI/BOOT +drwxr-xr-x 2 root root 4096 2020-02-12 00:43 ./EFI/BOOT -rw-r--r-- 1 root root 1417216 2019-07-05 18:54 ./EFI/BOOT/bootx64.efi -rw-r--r-- 1 root root 78 2013-09-23 20:35 ./EFI/BOOT/grub-embedded.cfg -rw-r--r-- 1 root root 893 2018-04-17 21:17 ./EFI/BOOT/grub.cfg --rw-r--r-- 2 root root 10029440 2020-02-06 00:45 ./EFI/BOOT/huge.s --rw-r--r-- 2 root root 44163868 2020-02-06 01:58 ./EFI/BOOT/initrd.img +-rw-r--r-- 2 root root 10025344 2020-02-11 20:10 ./EFI/BOOT/huge.s +-rw-r--r-- 2 root root 44173976 2020-02-12 00:41 ./EFI/BOOT/initrd.img -rwxr-xr-x 1 root root 2504 2019-07-05 18:54 ./EFI/BOOT/make-grub.sh -rw-r--r-- 1 root root 10722 2013-09-21 19:02 ./EFI/BOOT/osdetect.cfg -rw-r--r-- 1 root root 1273 2013-08-12 21:08 ./EFI/BOOT/tools.cfg --rw-r--r-- 1 root root 1237754 2020-02-09 23:16 ./FILELIST.TXT +-rw-r--r-- 1 root root 1237653 2020-02-11 05:02 ./FILELIST.TXT -rw-r--r-- 1 root root 1572 2012-08-29 18:27 ./GPG-KEY --rw-r--r-- 1 root root 736339 2020-02-11 05:00 ./PACKAGES.TXT +-rw-r--r-- 1 root root 736233 2020-02-12 05:19 ./PACKAGES.TXT -rw-r--r-- 1 root root 8564 2016-06-28 21:33 ./README.TXT --rw-r--r-- 1 root root 3629 2020-02-06 01:37 ./README.initrd +-rw-r--r-- 1 root root 3629 2020-02-11 23:40 ./README.initrd -rw-r--r-- 1 root root 34412 2017-12-01 17:44 ./README_CRYPT.TXT -rw-r--r-- 1 root root 8751 2016-06-28 21:44 ./README_LVM.TXT -rw-r--r-- 1 root root 19658 2013-06-18 04:34 ./README_RAID.TXT @@ -761,16 +761,16 @@ drwxr-xr-x 2 root root 4096 2019-10-18 18:28 ./extra/xv -rw-r--r-- 1 root root 233 2018-04-13 18:00 ./extra/xv/xv-3.10a-x86_64-9.txt -rw-r--r-- 1 root root 953308 2018-04-13 18:00 ./extra/xv/xv-3.10a-x86_64-9.txz -rw-r--r-- 1 root root 163 2018-04-13 18:00 ./extra/xv/xv-3.10a-x86_64-9.txz.asc -drwxr-xr-x 3 root root 4096 2020-02-06 01:58 ./isolinux +drwxr-xr-x 3 root root 4096 2020-02-12 00:42 ./isolinux -rw-r--r-- 1 root root 6183 2017-11-18 18:47 ./isolinux/README.TXT -rw-r--r-- 1 root root 788 2007-03-17 19:50 ./isolinux/README_SPLIT.TXT -rw-r--r-- 1 root root 1474560 2019-07-05 18:54 ./isolinux/efiboot.img -rw-r--r-- 1 root root 574 2013-10-24 00:19 ./isolinux/f2.txt --rw-r--r-- 2 root root 44163868 2020-02-06 01:58 ./isolinux/initrd.img +-rw-r--r-- 2 root root 44173976 2020-02-12 00:41 ./isolinux/initrd.img -rw-r--r-- 1 root root 50 2003-01-18 00:02 ./isolinux/iso.sort -rw-r--r-- 1 root root 24576 2016-05-27 20:36 ./isolinux/isolinux.bin -rw-r--r-- 1 root root 578 2013-03-27 03:29 ./isolinux/isolinux.cfg --rw-r--r-- 1 root root 682 2020-02-06 01:37 ./isolinux/message.txt +-rw-r--r-- 1 root root 682 2020-02-11 23:40 ./isolinux/message.txt drwxr-xr-x 2 root root 4096 2003-03-17 07:31 ./isolinux/sbootmgr -rwxr-xr-x 1 root root 36064 1995-05-12 01:23 ./isolinux/sbootmgr/RAWRITE.EXE -rw-r--r-- 1 root root 2138 1997-12-01 01:21 ./isolinux/sbootmgr/RAWRITE12.DOC @@ -781,12 +781,12 @@ lrwxrwxrwx 1 root root 11 2009-08-23 23:37 ./isolinux/sbootmgr/RAWRITE13 -rw-r--r-- 1 root root 1291 2003-03-17 07:31 ./isolinux/sbootmgr/README.TXT -rw-r--r-- 1 root root 110592 2003-03-16 08:38 ./isolinux/sbootmgr/sbootmgr.dsk -rw-r--r-- 1 root root 3024 2018-03-03 01:37 ./isolinux/setpkg -drwxr-xr-x 5 root root 4096 2020-02-06 01:37 ./kernels --rw-r--r-- 1 root root 36 2020-02-06 01:37 ./kernels/VERSIONS.TXT -drwxr-xr-x 2 root root 4096 2020-02-06 00:45 ./kernels/huge.s --rw-r--r-- 1 root root 1080808 2020-02-06 00:45 ./kernels/huge.s/System.map.gz --rw-r--r-- 2 root root 10029440 2020-02-06 00:45 ./kernels/huge.s/bzImage --rw-r--r-- 1 root root 199120 2020-02-05 22:36 ./kernels/huge.s/config +drwxr-xr-x 5 root root 4096 2020-02-11 23:40 ./kernels +-rw-r--r-- 1 root root 36 2020-02-11 23:40 ./kernels/VERSIONS.TXT +drwxr-xr-x 2 root root 4096 2020-02-11 20:10 ./kernels/huge.s +-rw-r--r-- 1 root root 1080807 2020-02-11 20:10 ./kernels/huge.s/System.map.gz +-rw-r--r-- 2 root root 10025344 2020-02-11 20:10 ./kernels/huge.s/bzImage +-rw-r--r-- 1 root root 199131 2020-02-11 17:59 ./kernels/huge.s/config drwxr-xr-x 2 root root 4096 2011-03-25 03:15 ./kernels/memtest -rw-r--r-- 1 root root 60 2011-03-24 00:19 ./kernels/memtest/README -rw-r--r-- 1 root root 150024 2013-10-17 04:15 ./kernels/memtest/memtest @@ -831,13 +831,13 @@ drwxr-xr-x 2 root root 4096 2012-09-20 18:06 ./patches -rw-r--r-- 1 root root 575 2012-09-20 18:06 ./patches/FILE_LIST -rw-r--r-- 1 root root 14 2012-09-20 18:06 ./patches/MANIFEST.bz2 -rw-r--r-- 1 root root 224 2012-09-20 18:06 ./patches/PACKAGES.TXT -drwxr-xr-x 18 root root 4096 2020-02-11 05:00 ./slackware64 --rw-r--r-- 1 root root 291829 2020-02-11 05:00 ./slackware64/CHECKSUMS.md5 --rw-r--r-- 1 root root 163 2020-02-11 05:00 ./slackware64/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 363482 2020-02-11 04:57 ./slackware64/FILE_LIST --rw-r--r-- 1 root root 3704195 2020-02-11 04:58 ./slackware64/MANIFEST.bz2 +drwxr-xr-x 18 root root 4096 2020-02-12 05:19 ./slackware64 +-rw-r--r-- 1 root root 291829 2020-02-12 05:19 ./slackware64/CHECKSUMS.md5 +-rw-r--r-- 1 root root 163 2020-02-12 05:19 ./slackware64/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 363482 2020-02-12 05:16 ./slackware64/FILE_LIST +-rw-r--r-- 1 root root 3699990 2020-02-12 05:17 ./slackware64/MANIFEST.bz2 lrwxrwxrwx 1 root root 15 2009-08-23 23:34 ./slackware64/PACKAGES.TXT -> ../PACKAGES.TXT -drwxr-xr-x 2 root root 28672 2020-02-08 21:14 ./slackware64/a +drwxr-xr-x 2 root root 28672 2020-02-12 05:16 ./slackware64/a -rw-r--r-- 1 root root 327 2018-06-24 18:44 ./slackware64/a/aaa_base-14.2-x86_64-5.txt -rw-r--r-- 1 root root 10820 2018-06-24 18:44 ./slackware64/a/aaa_base-14.2-x86_64-5.txz -rw-r--r-- 1 root root 163 2018-06-24 18:44 ./slackware64/a/aaa_base-14.2-x86_64-5.txz.asc @@ -990,15 +990,15 @@ drwxr-xr-x 2 root root 28672 2020-02-08 21:14 ./slackware64/a -rw-r--r-- 1 root root 422 2020-02-08 19:55 ./slackware64/a/kernel-firmware-20200207_6f89735-noarch-1.txt -rw-r--r-- 1 root root 97158700 2020-02-08 19:55 ./slackware64/a/kernel-firmware-20200207_6f89735-noarch-1.txz -rw-r--r-- 1 root root 163 2020-02-08 19:55 ./slackware64/a/kernel-firmware-20200207_6f89735-noarch-1.txz.asc --rw-r--r-- 1 root root 624 2020-02-06 00:47 ./slackware64/a/kernel-generic-5.4.18-x86_64-1.txt --rw-r--r-- 1 root root 6912292 2020-02-06 00:47 ./slackware64/a/kernel-generic-5.4.18-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-06 00:47 ./slackware64/a/kernel-generic-5.4.18-x86_64-1.txz.asc --rw-r--r-- 1 root root 636 2020-02-06 00:45 ./slackware64/a/kernel-huge-5.4.18-x86_64-1.txt --rw-r--r-- 1 root root 10640960 2020-02-06 00:45 ./slackware64/a/kernel-huge-5.4.18-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-06 00:45 ./slackware64/a/kernel-huge-5.4.18-x86_64-1.txz.asc --rw-r--r-- 1 root root 567 2020-02-06 00:55 ./slackware64/a/kernel-modules-5.4.18-x86_64-1.txt --rw-r--r-- 1 root root 43079608 2020-02-06 00:55 ./slackware64/a/kernel-modules-5.4.18-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-06 00:55 ./slackware64/a/kernel-modules-5.4.18-x86_64-1.txz.asc +-rw-r--r-- 1 root root 624 2020-02-11 20:11 ./slackware64/a/kernel-generic-5.4.19-x86_64-1.txt +-rw-r--r-- 1 root root 6912208 2020-02-11 20:11 ./slackware64/a/kernel-generic-5.4.19-x86_64-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 20:11 ./slackware64/a/kernel-generic-5.4.19-x86_64-1.txz.asc +-rw-r--r-- 1 root root 636 2020-02-11 20:10 ./slackware64/a/kernel-huge-5.4.19-x86_64-1.txt +-rw-r--r-- 1 root root 10639480 2020-02-11 20:10 ./slackware64/a/kernel-huge-5.4.19-x86_64-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 20:10 ./slackware64/a/kernel-huge-5.4.19-x86_64-1.txz.asc +-rw-r--r-- 1 root root 567 2020-02-11 20:20 ./slackware64/a/kernel-modules-5.4.19-x86_64-1.txt +-rw-r--r-- 1 root root 43074272 2020-02-11 20:20 ./slackware64/a/kernel-modules-5.4.19-x86_64-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 20:20 ./slackware64/a/kernel-modules-5.4.19-x86_64-1.txz.asc -rw-r--r-- 1 root root 508 2019-12-30 18:09 ./slackware64/a/kmod-26-x86_64-3.txt -rw-r--r-- 1 root root 108312 2019-12-30 18:09 ./slackware64/a/kmod-26-x86_64-3.txz -rw-r--r-- 1 root root 163 2019-12-30 18:09 ./slackware64/a/kmod-26-x86_64-3.txz.asc @@ -1026,17 +1026,17 @@ drwxr-xr-x 2 root root 28672 2020-02-08 21:14 ./slackware64/a -rw-r--r-- 1 root root 445 2018-04-17 07:04 ./slackware64/a/lrzip-0.631-x86_64-2.txt -rw-r--r-- 1 root root 214724 2018-04-17 07:04 ./slackware64/a/lrzip-0.631-x86_64-2.txz -rw-r--r-- 1 root root 163 2018-04-17 07:04 ./slackware64/a/lrzip-0.631-x86_64-2.txz.asc --rw-r--r-- 1 root root 555 2019-12-02 21:43 ./slackware64/a/lvm2-2.03.07-x86_64-1.txt --rw-r--r-- 1 root root 1505740 2019-12-02 21:43 ./slackware64/a/lvm2-2.03.07-x86_64-1.txz --rw-r--r-- 1 root root 163 2019-12-02 21:43 ./slackware64/a/lvm2-2.03.07-x86_64-1.txz.asc +-rw-r--r-- 1 root root 555 2020-02-11 19:43 ./slackware64/a/lvm2-2.03.08-x86_64-1.txt +-rw-r--r-- 1 root root 1511580 2020-02-11 19:43 ./slackware64/a/lvm2-2.03.08-x86_64-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 19:43 ./slackware64/a/lvm2-2.03.08-x86_64-1.txz.asc -rw-r--r-- 1 root root 441 2019-01-13 19:51 ./slackware64/a/lzip-1.21-x86_64-1.txt -rw-r--r-- 1 root root 85188 2019-01-13 19:51 ./slackware64/a/lzip-1.21-x86_64-1.txz -rw-r--r-- 1 root root 163 2019-01-13 19:51 ./slackware64/a/lzip-1.21-x86_64-1.txz.asc -rw-r--r-- 1 root root 405 2019-01-11 20:05 ./slackware64/a/lzlib-1.11-x86_64-1.txt -rw-r--r-- 1 root root 56396 2019-01-11 20:05 ./slackware64/a/lzlib-1.11-x86_64-1.txz -rw-r--r-- 1 root root 163 2019-01-11 20:05 ./slackware64/a/lzlib-1.11-x86_64-1.txz.asc --rw-r--r-- 1 root root 9157 2020-02-06 01:37 ./slackware64/a/maketag --rw-r--r-- 1 root root 9157 2020-02-06 01:37 ./slackware64/a/maketag.ez +-rw-r--r-- 1 root root 9157 2020-02-11 23:40 ./slackware64/a/maketag +-rw-r--r-- 1 root root 9157 2020-02-11 23:40 ./slackware64/a/maketag.ez -rw-r--r-- 1 root root 591 2020-01-11 19:31 ./slackware64/a/mcelog-168-x86_64-1.txt -rw-r--r-- 1 root root 342928 2020-01-11 19:31 ./slackware64/a/mcelog-168-x86_64-1.txz -rw-r--r-- 1 root root 163 2020-01-11 19:31 ./slackware64/a/mcelog-168-x86_64-1.txz.asc @@ -1109,9 +1109,9 @@ drwxr-xr-x 2 root root 28672 2020-02-08 21:14 ./slackware64/a -rw-r--r-- 1 root root 406 2020-01-15 17:44 ./slackware64/a/sed-4.8-x86_64-1.txt -rw-r--r-- 1 root root 249488 2020-01-15 17:44 ./slackware64/a/sed-4.8-x86_64-1.txz -rw-r--r-- 1 root root 163 2020-01-15 17:44 ./slackware64/a/sed-4.8-x86_64-1.txz.asc --rw-r--r-- 1 root root 512 2020-01-26 18:48 ./slackware64/a/shadow-4.8.1-x86_64-1.txt --rw-r--r-- 1 root root 1503360 2020-01-26 18:48 ./slackware64/a/shadow-4.8.1-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-01-26 18:48 ./slackware64/a/shadow-4.8.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 422 2020-02-12 02:19 ./slackware64/a/shadow-4.8.1-x86_64-2.txt +-rw-r--r-- 1 root root 1503668 2020-02-12 02:19 ./slackware64/a/shadow-4.8.1-x86_64-2.txz +-rw-r--r-- 1 root root 163 2020-02-12 02:19 ./slackware64/a/shadow-4.8.1-x86_64-2.txz.asc -rw-r--r-- 1 root root 623 2018-04-13 13:12 ./slackware64/a/sharutils-4.15.2-x86_64-2.txt -rw-r--r-- 1 root root 264912 2018-04-13 13:12 ./slackware64/a/sharutils-4.15.2-x86_64-2.txz -rw-r--r-- 1 root root 163 2018-04-13 13:12 ./slackware64/a/sharutils-4.15.2-x86_64-2.txz.asc @@ -1139,7 +1139,7 @@ drwxr-xr-x 2 root root 28672 2020-02-08 21:14 ./slackware64/a -rw-r--r-- 1 root root 378 2020-01-13 18:57 ./slackware64/a/sysvinit-scripts-2.1-noarch-28.txt -rw-r--r-- 1 root root 22360 2020-01-13 18:57 ./slackware64/a/sysvinit-scripts-2.1-noarch-28.txz -rw-r--r-- 1 root root 163 2020-01-13 18:57 ./slackware64/a/sysvinit-scripts-2.1-noarch-28.txz.asc --rw-r--r-- 1 root root 1418 2020-02-06 01:37 ./slackware64/a/tagfile +-rw-r--r-- 1 root root 1418 2020-02-11 23:40 ./slackware64/a/tagfile -rw-r--r-- 1 root root 395 2019-02-23 18:03 ./slackware64/a/tar-1.32-x86_64-1.txt -rw-r--r-- 1 root root 844396 2019-02-23 18:03 ./slackware64/a/tar-1.32-x86_64-1.txz -rw-r--r-- 1 root root 163 2019-02-23 18:03 ./slackware64/a/tar-1.32-x86_64-1.txz.asc @@ -1440,7 +1440,7 @@ drwxr-xr-x 2 root root 20480 2020-02-11 04:57 ./slackware64/ap -rw-r--r-- 1 root root 506 2020-01-07 20:18 ./slackware64/ap/zsh-5.7.1-x86_64-2.txt -rw-r--r-- 1 root root 3000108 2020-01-07 20:18 ./slackware64/ap/zsh-5.7.1-x86_64-2.txz -rw-r--r-- 1 root root 163 2020-01-07 20:18 ./slackware64/ap/zsh-5.7.1-x86_64-2.txz.asc -drwxr-xr-x 2 root root 20480 2020-02-11 04:57 ./slackware64/d +drwxr-xr-x 2 root root 20480 2020-02-12 05:16 ./slackware64/d -rw-r--r-- 1 root root 360 2019-12-30 00:49 ./slackware64/d/Cython-0.29.14-x86_64-2.txt -rw-r--r-- 1 root root 3295652 2019-12-30 00:49 ./slackware64/d/Cython-0.29.14-x86_64-2.txz -rw-r--r-- 1 root root 163 2019-12-30 00:49 ./slackware64/d/Cython-0.29.14-x86_64-2.txz.asc @@ -1542,9 +1542,9 @@ drwxr-xr-x 2 root root 20480 2020-02-11 04:57 ./slackware64/d -rw-r--r-- 1 root root 279 2018-04-13 13:53 ./slackware64/d/intltool-0.51.0-x86_64-4.txt -rw-r--r-- 1 root root 48112 2018-04-13 13:53 ./slackware64/d/intltool-0.51.0-x86_64-4.txz -rw-r--r-- 1 root root 163 2018-04-13 13:53 ./slackware64/d/intltool-0.51.0-x86_64-4.txz.asc --rw-r--r-- 1 root root 332 2020-02-06 00:56 ./slackware64/d/kernel-headers-5.4.18-x86-1.txt --rw-r--r-- 1 root root 964080 2020-02-06 00:56 ./slackware64/d/kernel-headers-5.4.18-x86-1.txz --rw-r--r-- 1 root root 163 2020-02-06 00:56 ./slackware64/d/kernel-headers-5.4.18-x86-1.txz.asc +-rw-r--r-- 1 root root 332 2020-02-11 20:21 ./slackware64/d/kernel-headers-5.4.19-x86-1.txt +-rw-r--r-- 1 root root 964156 2020-02-11 20:21 ./slackware64/d/kernel-headers-5.4.19-x86-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 20:21 ./slackware64/d/kernel-headers-5.4.19-x86-1.txz.asc -rw-r--r-- 1 root root 498 2019-09-25 19:06 ./slackware64/d/libtool-2.4.6-x86_64-12.txt -rw-r--r-- 1 root root 428440 2019-09-25 19:06 ./slackware64/d/libtool-2.4.6-x86_64-12.txz -rw-r--r-- 1 root root 163 2019-09-25 19:06 ./slackware64/d/libtool-2.4.6-x86_64-12.txz.asc @@ -1662,15 +1662,15 @@ drwxr-xr-x 2 root root 4096 2016-04-01 21:41 ./slackware64/f -rw-r--r-- 1 root root 1075 2018-03-01 07:54 ./slackware64/f/maketag -rw-r--r-- 1 root root 1075 2018-03-01 07:54 ./slackware64/f/maketag.ez -rw-r--r-- 1 root root 32 2018-03-01 07:54 ./slackware64/f/tagfile -drwxr-xr-x 2 root root 4096 2020-02-06 02:07 ./slackware64/k +drwxr-xr-x 2 root root 4096 2020-02-12 05:16 ./slackware64/k -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/k/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/k/install.end --rw-r--r-- 1 root root 317 2020-02-06 00:40 ./slackware64/k/kernel-source-5.4.18-noarch-1.txt --rw-r--r-- 1 root root 109861092 2020-02-06 00:40 ./slackware64/k/kernel-source-5.4.18-noarch-1.txz --rw-r--r-- 1 root root 163 2020-02-06 00:40 ./slackware64/k/kernel-source-5.4.18-noarch-1.txz.asc --rw-r--r-- 1 root root 1170 2020-02-06 01:37 ./slackware64/k/maketag --rw-r--r-- 1 root root 1170 2020-02-06 01:37 ./slackware64/k/maketag.ez --rw-r--r-- 1 root root 18 2020-02-06 01:37 ./slackware64/k/tagfile +-rw-r--r-- 1 root root 317 2020-02-11 20:05 ./slackware64/k/kernel-source-5.4.19-noarch-1.txt +-rw-r--r-- 1 root root 109877148 2020-02-11 20:05 ./slackware64/k/kernel-source-5.4.19-noarch-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 20:05 ./slackware64/k/kernel-source-5.4.19-noarch-1.txz.asc +-rw-r--r-- 1 root root 1170 2020-02-11 23:41 ./slackware64/k/maketag +-rw-r--r-- 1 root root 1170 2020-02-11 23:41 ./slackware64/k/maketag.ez +-rw-r--r-- 1 root root 18 2020-02-11 23:41 ./slackware64/k/tagfile drwxr-xr-x 2 root root 45056 2020-02-07 22:39 ./slackware64/kde -rw-r--r-- 1 root root 319 2018-06-02 22:05 ./slackware64/kde/amarok-2.9.0-x86_64-3.txt -rw-r--r-- 1 root root 47003780 2018-06-02 22:05 ./slackware64/kde/amarok-2.9.0-x86_64-3.txz @@ -4827,7 +4827,7 @@ drwxr-xr-x 2 root root 65536 2020-02-03 20:54 ./slackware64/x -rw-r--r-- 1 root root 213 2018-04-13 06:10 ./slackware64/x/xwud-1.0.5-x86_64-2.txt -rw-r--r-- 1 root root 25288 2018-04-13 06:10 ./slackware64/x/xwud-1.0.5-x86_64-2.txz -rw-r--r-- 1 root root 163 2018-04-13 06:10 ./slackware64/x/xwud-1.0.5-x86_64-2.txz.asc -drwxr-xr-x 2 root root 12288 2020-02-11 04:57 ./slackware64/xap +drwxr-xr-x 2 root root 12288 2020-02-12 05:16 ./slackware64/xap -rw-r--r-- 1 root root 625 2020-01-03 18:37 ./slackware64/xap/MPlayer-20200103-x86_64-1.txt -rw-r--r-- 1 root root 2730320 2020-01-03 18:37 ./slackware64/xap/MPlayer-20200103-x86_64-1.txz -rw-r--r-- 1 root root 163 2020-01-03 18:37 ./slackware64/xap/MPlayer-20200103-x86_64-1.txz.asc @@ -4898,9 +4898,9 @@ drwxr-xr-x 2 root root 12288 2020-02-11 04:57 ./slackware64/xap -rw-r--r-- 1 root root 483 2020-02-10 19:25 ./slackware64/xap/mozilla-firefox-68.5.0esr-x86_64-1.txt -rw-r--r-- 1 root root 51623736 2020-02-10 19:25 ./slackware64/xap/mozilla-firefox-68.5.0esr-x86_64-1.txz -rw-r--r-- 1 root root 163 2020-02-10 19:25 ./slackware64/xap/mozilla-firefox-68.5.0esr-x86_64-1.txz.asc --rw-r--r-- 1 root root 663 2020-01-24 20:04 ./slackware64/xap/mozilla-thunderbird-68.4.2-x86_64-1.txt --rw-r--r-- 1 root root 48987048 2020-01-24 20:04 ./slackware64/xap/mozilla-thunderbird-68.4.2-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-01-24 20:04 ./slackware64/xap/mozilla-thunderbird-68.4.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 663 2020-02-11 21:31 ./slackware64/xap/mozilla-thunderbird-68.5.0-x86_64-1.txt +-rw-r--r-- 1 root root 48904560 2020-02-11 21:31 ./slackware64/xap/mozilla-thunderbird-68.5.0-x86_64-1.txz +-rw-r--r-- 1 root root 163 2020-02-11 21:31 ./slackware64/xap/mozilla-thunderbird-68.5.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 359 2019-10-09 16:46 ./slackware64/xap/network-manager-applet-1.8.24-x86_64-1.txt -rw-r--r-- 1 root root 1055396 2019-10-09 16:46 ./slackware64/xap/network-manager-applet-1.8.24-x86_64-1.txz -rw-r--r-- 1 root root 163 2019-10-09 16:46 ./slackware64/xap/network-manager-applet-1.8.24-x86_64-1.txz.asc @@ -5064,11 +5064,11 @@ drwxr-xr-x 2 root root 4096 2019-02-17 23:51 ./slackware64/y -rw-r--r-- 1 root root 1147 2018-03-01 07:55 ./slackware64/y/maketag -rw-r--r-- 1 root root 1147 2018-03-01 07:55 ./slackware64/y/maketag.ez -rw-r--r-- 1 root root 14 2018-03-01 07:55 ./slackware64/y/tagfile -drwxr-xr-x 19 root root 4096 2020-02-11 05:02 ./source --rw-r--r-- 1 root root 480661 2020-02-11 05:02 ./source/CHECKSUMS.md5 --rw-r--r-- 1 root root 163 2020-02-11 05:02 ./source/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 677439 2020-02-11 05:01 ./source/FILE_LIST --rw-r--r-- 1 root root 18362210 2020-02-11 05:01 ./source/MANIFEST.bz2 +drwxr-xr-x 19 root root 4096 2020-02-12 05:20 ./source +-rw-r--r-- 1 root root 480661 2020-02-12 05:20 ./source/CHECKSUMS.md5 +-rw-r--r-- 1 root root 163 2020-02-12 05:20 ./source/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 677439 2020-02-12 05:20 ./source/FILE_LIST +-rw-r--r-- 1 root root 18351372 2020-02-12 05:20 ./source/MANIFEST.bz2 -rw-r--r-- 1 root root 1314 2006-10-02 04:40 ./source/README.TXT drwxr-xr-x 112 root root 4096 2020-02-06 23:25 ./source/a -rw-r--r-- 1 root root 1034 2019-05-04 17:56 ./source/a/FTBFSlog @@ -5593,8 +5593,8 @@ drwxr-xr-x 2 root root 4096 2019-09-29 23:48 ./source/a/lrzip -rw-r--r-- 1 root root 422744 2016-10-21 00:46 ./source/a/lrzip/lrzip-0.631.tar.xz -rwxr-xr-x 1 root root 4477 2019-09-29 23:48 ./source/a/lrzip/lrzip.SlackBuild -rw-r--r-- 1 root root 898 2018-02-27 06:13 ./source/a/lrzip/slack-desc -drwxr-xr-x 2 root root 4096 2019-12-02 20:41 ./source/a/lvm2 --rw-r--r-- 1 root root 1645274 2019-11-30 13:57 ./source/a/lvm2/LVM2.2.03.07.tar.lz +drwxr-xr-x 2 root root 4096 2020-02-11 19:39 ./source/a/lvm2 +-rw-r--r-- 1 root root 1648615 2020-02-11 10:00 ./source/a/lvm2/LVM2.2.03.08.tar.lz -rw-r--r-- 1 root root 302 2014-12-09 04:47 ./source/a/lvm2/create-dm-run-dir.diff.gz -rw-r--r-- 1 root root 271 2008-10-06 12:21 ./source/a/lvm2/doinst.sh.gz -rw-r--r-- 1 root root 31 2019-11-02 17:11 ./source/a/lvm2/lvm.url @@ -5850,7 +5850,7 @@ drwxr-xr-x 2 root root 4096 2020-01-27 19:30 ./source/a/shadow/pam.d -rw-r--r-- 1 root root 1611196 2020-01-24 21:43 ./source/a/shadow/shadow-4.8.1.tar.xz -rw-r--r-- 1 root root 488 2020-01-24 21:45 ./source/a/shadow/shadow-4.8.1.tar.xz.asc -rw-r--r-- 1 root root 734 2013-12-14 21:05 ./source/a/shadow/shadow.CVE-2005-4890.relax.diff.gz --rwxr-xr-x 1 root root 7609 2020-02-07 07:23 ./source/a/shadow/shadow.SlackBuild +-rwxr-xr-x 1 root root 7609 2020-02-12 02:15 ./source/a/shadow/shadow.SlackBuild -rw-r--r-- 1 root root 522 2020-02-06 23:30 ./source/a/shadow/shadow.login.display.short.hostname.diff.gz -rw-r--r-- 1 root root 39 2019-06-17 02:57 ./source/a/shadow/shadow.url -rw-r--r-- 1 root root 876 2018-11-09 20:31 ./source/a/shadow/slack-desc @@ -7056,21 +7056,21 @@ drwxr-xr-x 2 root root 4096 2020-02-07 21:59 ./source/installer/sources/n -rw-r--r-- 1 root root 1520160 2020-02-07 10:24 ./source/installer/sources/nano/nano-4.8.tar.xz -rw-r--r-- 1 root root 833 2020-02-07 10:24 ./source/installer/sources/nano/nano-4.8.tar.xz.sig -rw-r--r-- 1 root root 16894 2012-09-03 20:53 ./source/installer/usbimg2disk.sh -drwxr-xr-x 4 root root 4096 2020-02-05 22:08 ./source/k +drwxr-xr-x 4 root root 4096 2020-02-11 18:00 ./source/k -rwxr-xr-x 1 root root 7861 2019-12-27 22:39 ./source/k/build-all-kernels.sh -drwxr-xr-x 2 root root 4096 2020-02-05 22:36 ./source/k/kernel-configs --rw-r--r-- 1 root root 197548 2020-02-05 22:34 ./source/k/kernel-configs/config-generic-5.4.18 --rw-r--r-- 1 root root 199120 2020-02-05 22:36 ./source/k/kernel-configs/config-generic-5.4.18.x64 --rw-r--r-- 1 root root 199225 2020-02-05 22:33 ./source/k/kernel-configs/config-generic-smp-5.4.18-smp --rw-r--r-- 1 root root 197548 2020-02-05 22:34 ./source/k/kernel-configs/config-huge-5.4.18 --rw-r--r-- 1 root root 199120 2020-02-05 22:36 ./source/k/kernel-configs/config-huge-5.4.18.x64 --rw-r--r-- 1 root root 199225 2020-02-05 22:34 ./source/k/kernel-configs/config-huge-smp-5.4.18-smp +drwxr-xr-x 2 root root 4096 2020-02-11 17:59 ./source/k/kernel-configs +-rw-r--r-- 1 root root 197559 2020-02-11 17:57 ./source/k/kernel-configs/config-generic-5.4.19 +-rw-r--r-- 1 root root 199131 2020-02-11 17:59 ./source/k/kernel-configs/config-generic-5.4.19.x64 +-rw-r--r-- 1 root root 199236 2020-02-11 17:56 ./source/k/kernel-configs/config-generic-smp-5.4.19-smp +-rw-r--r-- 1 root root 197559 2020-02-11 17:57 ./source/k/kernel-configs/config-huge-5.4.19 +-rw-r--r-- 1 root root 199131 2020-02-11 17:59 ./source/k/kernel-configs/config-huge-5.4.19.x64 +-rw-r--r-- 1 root root 199236 2020-02-11 17:57 ./source/k/kernel-configs/config-huge-smp-5.4.19-smp -rwxr-xr-x 1 root root 7416 2019-11-15 20:12 ./source/k/kernel-generic.SlackBuild -rwxr-xr-x 1 root root 3779 2019-09-29 23:48 ./source/k/kernel-headers.SlackBuild -rwxr-xr-x 1 root root 5979 2019-11-15 20:12 ./source/k/kernel-modules.SlackBuild -rwxr-xr-x 1 root root 7952 2019-11-15 18:40 ./source/k/kernel-source.SlackBuild --rw-r--r-- 1 root root 989 2020-02-05 21:27 ./source/k/linux-5.4.18.tar.sign --rw-r--r-- 1 root root 109470980 2020-02-05 21:27 ./source/k/linux-5.4.18.tar.xz +-rw-r--r-- 1 root root 989 2020-02-11 12:42 ./source/k/linux-5.4.19.tar.sign +-rw-r--r-- 1 root root 109480508 2020-02-11 12:42 ./source/k/linux-5.4.19.tar.xz drwxr-xr-x 2 root root 4096 2018-03-05 18:29 ./source/k/slack-desc -rw-r--r-- 1 root root 1138 2018-02-27 06:16 ./source/k/slack-desc/slack-desc.kernel-generic-smp.i686 -rw-r--r-- 1 root root 1041 2018-02-27 06:16 ./source/k/slack-desc/slack-desc.kernel-generic.i586 @@ -10433,7 +10433,7 @@ drwxr-xr-x 2 root root 4096 2020-02-08 19:19 ./source/n/libgpg-error drwxr-xr-x 2 root root 4096 2019-09-29 23:48 ./source/n/libksba -rw-r--r-- 1 root root 620649 2016-08-22 09:57 ./source/n/libksba/libksba-1.3.5.tar.bz2 -rw-r--r-- 1 root root 287 2016-08-22 09:58 ./source/n/libksba/libksba-1.3.5.tar.bz2.sig --rwxr-xr-x 1 root root 3964 2019-09-29 23:48 ./source/n/libksba/libksba.SlackBuild +-rwxr-xr-x 1 root root 3963 2020-02-11 19:13 ./source/n/libksba/libksba.SlackBuild -rw-r--r-- 1 root root 787 2018-02-27 06:13 ./source/n/libksba/slack-desc drwxr-xr-x 2 root root 4096 2020-01-16 17:45 ./source/n/libmbim -rw-r--r-- 1 root root 491708 2020-01-15 16:31 ./source/n/libmbim/libmbim-1.22.0.tar.xz @@ -12712,7 +12712,7 @@ drwxr-xr-x 2 root root 4096 2019-08-20 18:07 ./source/xap/mozilla-firefox/ -rw-r--r-- 1 root root 2748 2017-12-04 21:30 ./source/xap/mozilla-firefox/mozilla-firefox.desktop -rw-r--r-- 1 root root 946 2018-11-03 19:51 ./source/xap/mozilla-firefox/slack-desc -rw-r--r-- 1 root root 456 2019-07-08 18:54 ./source/xap/mozilla-firefox/unbreakdocs.diff.gz -drwxr-xr-x 5 root root 4096 2020-01-24 21:24 ./source/xap/mozilla-thunderbird +drwxr-xr-x 5 root root 4096 2020-02-11 22:04 ./source/xap/mozilla-thunderbird drwxr-xr-x 2 root root 4096 2016-07-03 18:05 ./source/xap/mozilla-thunderbird/autoconf -rw-r--r-- 1 root root 5869 2016-07-03 18:04 ./source/xap/mozilla-thunderbird/autoconf/autoconf-2.13-consolidated_fixes-1.patch.gz -rw-r--r-- 1 root root 300116 1999-01-15 21:03 ./source/xap/mozilla-thunderbird/autoconf/autoconf-2.13.tar.xz @@ -12740,8 +12740,8 @@ lrwxrwxrwx 1 root root 7 2019-08-28 16:40 ./source/xap/mozilla-thunderb -rw-r--r-- 1 root root 3378 2005-03-08 05:13 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.desktop -rw-r--r-- 1 root root 1130 2018-02-27 06:47 ./source/xap/mozilla-thunderbird/slack-desc -rw-r--r-- 1 root root 330 2019-08-27 16:35 ./source/xap/mozilla-thunderbird/tb.ui.scrollToClick.diff.gz --rw-r--r-- 1 root root 330801416 2020-01-24 16:20 ./source/xap/mozilla-thunderbird/thunderbird-68.4.2.source.tar.xz --rw-r--r-- 1 root root 833 2020-01-24 16:21 ./source/xap/mozilla-thunderbird/thunderbird-68.4.2.source.tar.xz.asc +-rw-r--r-- 1 root root 331328840 2020-02-11 16:45 ./source/xap/mozilla-thunderbird/thunderbird-68.5.0.source.tar.xz +-rw-r--r-- 1 root root 833 2020-02-11 16:45 ./source/xap/mozilla-thunderbird/thunderbird-68.5.0.source.tar.xz.asc -rw-r--r-- 1 root root 456 2019-07-08 18:54 ./source/xap/mozilla-thunderbird/unbreakdocs.diff.gz drwxr-xr-x 2 root root 4096 2019-10-09 16:45 ./source/xap/network-manager-applet -rw-r--r-- 1 root root 207 2012-08-10 23:59 ./source/xap/network-manager-applet/doinst.sh.gz @@ -13123,67 +13123,164 @@ drwxr-xr-x 2 root root 4096 2019-02-17 22:03 ./source/y/bsd-games/patches -rw-r--r-- 1 root root 313 2019-02-17 22:07 ./source/y/bsd-games/patches/bsd-games.fortunepath.diff.gz -rw-r--r-- 1 root root 1960 2006-09-09 00:47 ./source/y/bsd-games/patches/bsd-games.pom.diff.gz -rw-r--r-- 1 root root 1065 2019-02-17 22:28 ./source/y/bsd-games/slack-desc -drwxr-xr-x 4 root root 4096 2020-02-02 07:07 ./testing --rw-r--r-- 1 root root 4083 2020-02-02 07:07 ./testing/CHECKSUMS.md5 --rw-r--r-- 1 root root 163 2020-02-02 07:07 ./testing/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 5275 2020-02-02 07:07 ./testing/FILE_LIST --rw-r--r-- 1 root root 289825 2020-02-02 07:07 ./testing/MANIFEST.bz2 --rw-r--r-- 1 root root 2852 2020-02-02 07:07 ./testing/PACKAGES.TXT -drwxr-xr-x 2 root root 4096 2020-02-02 07:07 ./testing/packages --rw-r--r-- 1 root root 442 2020-02-02 06:13 ./testing/packages/binutils-2.34-x86_64-1.txt --rw-r--r-- 1 root root 4998792 2020-02-02 06:13 ./testing/packages/binutils-2.34-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-02 06:13 ./testing/packages/binutils-2.34-x86_64-1.txz.asc --rw-r--r-- 1 root root 313 2020-02-02 06:40 ./testing/packages/glibc-2.31-x86_64-1.txt --rw-r--r-- 1 root root 5417220 2020-02-02 06:40 ./testing/packages/glibc-2.31-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-02 06:40 ./testing/packages/glibc-2.31-x86_64-1.txz.asc --rw-r--r-- 1 root root 353 2020-02-02 06:40 ./testing/packages/glibc-i18n-2.31-x86_64-1.txt --rw-r--r-- 1 root root 11966424 2020-02-02 06:40 ./testing/packages/glibc-i18n-2.31-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-02 06:40 ./testing/packages/glibc-i18n-2.31-x86_64-1.txz.asc --rw-r--r-- 1 root root 507 2020-02-02 06:39 ./testing/packages/glibc-profile-2.31-x86_64-1.txt --rw-r--r-- 1 root root 1520864 2020-02-02 06:39 ./testing/packages/glibc-profile-2.31-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-02 06:39 ./testing/packages/glibc-profile-2.31-x86_64-1.txz.asc --rw-r--r-- 1 root root 323 2020-02-02 06:40 ./testing/packages/glibc-solibs-2.31-x86_64-1.txt --rw-r--r-- 1 root root 2754768 2020-02-02 06:40 ./testing/packages/glibc-solibs-2.31-x86_64-1.txz --rw-r--r-- 1 root root 163 2020-02-02 06:40 ./testing/packages/glibc-solibs-2.31-x86_64-1.txz.asc -drwxr-xr-x 4 root root 4096 2020-02-02 06:14 ./testing/source -drwxr-xr-x 3 root root 4096 2020-02-01 18:11 ./testing/source/binutils --rw-r--r-- 1 root root 21191174 2020-02-01 12:24 ./testing/source/binutils/binutils-2.34.tar.lz --rw-r--r-- 1 root root 801 2020-02-01 12:24 ./testing/source/binutils/binutils-2.34.tar.lz.sig --rwxr-xr-x 1 root root 8697 2019-09-29 23:48 ./testing/source/binutils/binutils.SlackBuild -drwxr-xr-x 2 root root 4096 2019-02-02 19:51 ./testing/source/binutils/patches --rw-r--r-- 1 root root 362 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.20.51.0.10-copy-osabi.patch.gz --rw-r--r-- 1 root root 302 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.20.51.0.10-sec-merge-emit.patch.gz --rw-r--r-- 1 root root 1087 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.20.51.0.2-libtool-lib64.patch.gz --rw-r--r-- 1 root root 649 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.24-ldforcele.patch.gz --rw-r--r-- 1 root root 436 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.25-set-long-long.patch.gz --rw-r--r-- 1 root root 626 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.25-version.patch.gz --rw-r--r-- 1 root root 729 2016-02-29 16:21 ./testing/source/binutils/patches/binutils-2.25.1-cleansweep.patch.gz --rw-r--r-- 1 root root 579 2019-02-02 20:11 ./testing/source/binutils/patches/binutils.export.demangle.h.diff.gz --rw-r--r-- 1 root root 307 2013-04-02 20:57 ./testing/source/binutils/patches/binutils.no-config-h-check.diff.gz --rw-r--r-- 1 root root 898 2018-02-27 06:13 ./testing/source/binutils/slack-desc -drwxr-xr-x 4 root root 4096 2020-02-01 18:20 ./testing/source/glibc --rw-r--r-- 1 root root 6055 2018-08-03 19:23 ./testing/source/glibc/doinst.sh-glibc --rw-r--r-- 1 root root 5954 2018-08-03 19:23 ./testing/source/glibc/doinst.sh-glibc-solibs --rw-r--r-- 1 root root 335 2019-02-01 04:36 ./testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff.gz --rw-r--r-- 1 root root 16676764 2020-02-01 12:26 ./testing/source/glibc/glibc-2.31.tar.xz --rw-r--r-- 1 root root 488 2020-02-01 12:26 ./testing/source/glibc/glibc-2.31.tar.xz.sig --rw-r--r-- 1 root root 2617 2016-08-08 14:05 ./testing/source/glibc/glibc-c-utf8-locale.patch.gz --rwxr-xr-x 1 root root 174 2004-08-09 06:21 ./testing/source/glibc/glibc-cvs-checkout.sh --rwxr-xr-x 1 root root 15786 2020-02-02 06:42 ./testing/source/glibc/glibc.SlackBuild --rw-r--r-- 1 root root 312 2019-02-16 20:06 ./testing/source/glibc/glibc.locale.no-archive.diff.gz --rw-r--r-- 1 root root 213 2006-08-22 06:33 ./testing/source/glibc/glibc.ru_RU.CP1251.diff.gz -drwxr-xr-x 2 root root 4096 2020-02-01 18:25 ./testing/source/glibc/patches -drwxr-xr-x 2 root root 4096 2006-09-14 06:32 ./testing/source/glibc/profile.d --rwxr-xr-x 1 root root 328 2011-03-27 21:19 ./testing/source/glibc/profile.d/glibc.csh.new --rwxr-xr-x 1 root root 325 2006-09-14 08:26 ./testing/source/glibc/profile.d/glibc.sh.new --rw-r--r-- 1 root root 766 2019-02-21 18:35 ./testing/source/glibc/slack-desc.glibc --rw-r--r-- 1 root root 1132 2018-02-27 06:12 ./testing/source/glibc/slack-desc.glibc-debug --rw-r--r-- 1 root root 811 2018-02-27 06:12 ./testing/source/glibc/slack-desc.glibc-i18n --rw-r--r-- 1 root root 968 2018-02-27 06:12 ./testing/source/glibc/slack-desc.glibc-profile --rw-r--r-- 1 root root 783 2018-02-27 06:12 ./testing/source/glibc/slack-desc.glibc-solibs -drwxr-xr-x 2 root root 4096 2020-02-06 01:58 ./usb-and-pxe-installers +drwxr-xr-x 4 root root 4096 2020-02-12 05:21 ./testing +-rw-r--r-- 1 root root 12191 2020-02-12 05:21 ./testing/CHECKSUMS.md5 +-rw-r--r-- 1 root root 163 2020-02-12 05:21 ./testing/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 15081 2020-02-12 05:21 ./testing/FILE_LIST +-rw-r--r-- 1 root root 114187 2020-02-12 05:21 ./testing/MANIFEST.bz2 +-rw-r--r-- 1 root root 21133 2020-02-12 05:21 ./testing/PACKAGES.TXT +drwxr-xr-x 3 root root 4096 2020-02-12 00:44 ./testing/packages +drwxr-xr-x 2 root root 12288 2020-02-12 05:21 ./testing/packages/PAM +-rw-r--r-- 1 root root 338 2020-02-10 23:10 ./testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txt +-rw-r--r-- 1 root root 194968 2020-02-10 23:10 ./testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:10 ./testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 326 2020-02-10 23:33 ./testing/packages/PAM/at-3.2.1-x86_64-1_pam.txt +-rw-r--r-- 1 root root 42132 2020-02-10 23:33 ./testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:33 ./testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 603 2020-02-10 23:33 ./testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txt +-rw-r--r-- 1 root root 216188 2020-02-10 23:33 ./testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:33 ./testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 437 2020-02-10 22:57 ./testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txt +-rw-r--r-- 1 root root 274732 2020-02-10 22:57 ./testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 22:57 ./testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 642 2020-02-10 23:07 ./testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txt +-rw-r--r-- 1 root root 1446284 2020-02-10 23:07 ./testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:07 ./testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 373 2020-02-10 23:32 ./testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txt +-rw-r--r-- 1 root root 970668 2020-02-10 23:32 ./testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:32 ./testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 450 2020-02-10 23:16 ./testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txt +-rw-r--r-- 1 root root 3251216 2020-02-10 23:16 ./testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:16 ./testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 454 2020-02-10 23:11 ./testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txt +-rw-r--r-- 1 root root 699444 2020-02-10 23:11 ./testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:11 ./testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 459 2020-02-10 23:08 ./testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txt +-rw-r--r-- 1 root root 19025756 2020-02-10 23:08 ./testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:08 ./testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 300 2020-02-10 23:55 ./testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txt +-rw-r--r-- 1 root root 16974196 2020-02-10 23:55 ./testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:55 ./testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz.asc +-rw-r--r-- 1 root root 433 2020-02-10 23:32 ./testing/packages/PAM/libcap-2.31-x86_64-1_pam.txt +-rw-r--r-- 1 root root 78316 2020-02-10 23:32 ./testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:32 ./testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 594 2020-02-10 23:05 ./testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txt +-rw-r--r-- 1 root root 122556 2020-02-10 23:05 ./testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:05 ./testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz.asc +-rw-r--r-- 1 root root 494 2020-02-10 23:00 ./testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txt +-rw-r--r-- 1 root root 81816 2020-02-10 23:00 ./testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:00 ./testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 369 2020-02-10 23:45 ./testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txt +-rw-r--r-- 1 root root 33277312 2020-02-10 23:45 ./testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:45 ./testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 580 2020-02-10 23:17 ./testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txt +-rw-r--r-- 1 root root 505036 2020-02-10 23:17 ./testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:17 ./testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 420 2020-02-10 23:33 ./testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txt +-rw-r--r-- 1 root root 43272 2020-02-10 23:33 ./testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:33 ./testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 672 2020-02-10 23:18 ./testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txt +-rw-r--r-- 1 root root 807744 2020-02-10 23:18 ./testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:18 ./testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 430 2020-02-10 23:19 ./testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txt +-rw-r--r-- 1 root root 458820 2020-02-10 23:19 ./testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:19 ./testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 422 2020-02-10 23:00 ./testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txt +-rw-r--r-- 1 root root 472820 2020-02-10 23:00 ./testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:00 ./testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 450 2020-02-10 23:12 ./testing/packages/PAM/polkit-0.116-x86_64-1_pam.txt +-rw-r--r-- 1 root root 403260 2020-02-10 23:12 ./testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:12 ./testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 543 2020-02-10 23:19 ./testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txt +-rw-r--r-- 1 root root 21196 2020-02-10 23:19 ./testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:19 ./testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz.asc +-rw-r--r-- 1 root root 449 2020-02-10 23:20 ./testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txt +-rw-r--r-- 1 root root 391744 2020-02-10 23:20 ./testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:20 ./testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz.asc +-rw-r--r-- 1 root root 371 2020-02-10 23:21 ./testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txt +-rw-r--r-- 1 root root 1356028 2020-02-10 23:21 ./testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:21 ./testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 507 2020-02-10 23:31 ./testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txt +-rw-r--r-- 1 root root 12118132 2020-02-10 23:31 ./testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:31 ./testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 653 2020-02-10 23:09 ./testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txt +-rw-r--r-- 1 root root 548028 2020-02-10 23:09 ./testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:09 ./testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 422 2020-02-12 02:30 ./testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txt +-rw-r--r-- 1 root root 1373800 2020-02-12 02:30 ./testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-12 02:30 ./testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 442 2020-02-10 23:10 ./testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txt +-rw-r--r-- 1 root root 774928 2020-02-10 23:10 ./testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:10 ./testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 736 2020-02-10 23:12 ./testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txt +-rw-r--r-- 1 root root 972328 2020-02-10 23:12 ./testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:12 ./testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz.asc +-rw-r--r-- 1 root root 354 2020-02-10 23:04 ./testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txt +-rw-r--r-- 1 root root 2651216 2020-02-10 23:04 ./testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:04 ./testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 511 2020-02-10 23:31 ./testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txt +-rw-r--r-- 1 root root 127196 2020-02-10 23:31 ./testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:31 ./testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz.asc +-rw-r--r-- 1 root root 253 2020-02-10 23:31 ./testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txt +-rw-r--r-- 1 root root 117976 2020-02-10 23:31 ./testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:31 ./testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz.asc +-rw-r--r-- 1 root root 508 2020-02-10 23:46 ./testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txt +-rw-r--r-- 1 root root 1235304 2020-02-10 23:46 ./testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:46 ./testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz.asc +-rw-r--r-- 1 root root 463 2020-02-10 23:48 ./testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txt +-rw-r--r-- 1 root root 6509296 2020-02-10 23:48 ./testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz +-rw-r--r-- 1 root root 163 2020-02-10 23:48 ./testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz.asc +drwxr-xr-x 3 root root 4096 2020-02-12 00:43 ./testing/source +drwxr-xr-x 3 root root 4096 2020-02-08 04:38 ./testing/source/PAM +drwxr-xr-x 5 root root 4096 2020-02-10 20:28 ./testing/source/PAM/a +drwxr-xr-x 2 root root 4096 2020-02-06 19:48 ./testing/source/PAM/a/cracklib +-rw-r--r-- 1 root root 452693 2019-03-03 17:53 ./testing/source/PAM/a/cracklib/cracklib-2.9.7.tar.lz +-rwxr-xr-x 1 root root 4735 2020-02-06 19:47 ./testing/source/PAM/a/cracklib/cracklib.SlackBuild +-rw-r--r-- 1 root root 37 2020-02-06 19:11 ./testing/source/PAM/a/cracklib/cracklib.url +-rw-r--r-- 1 root root 893 2020-02-10 20:28 ./testing/source/PAM/a/cracklib/slack-desc +drwxr-xr-x 2 root root 4096 2020-02-10 20:28 ./testing/source/PAM/a/libpwquality +-rw-r--r-- 1 root root 273 2020-02-09 19:35 ./testing/source/PAM/a/libpwquality/doinst.sh.gz +-rw-r--r-- 1 root root 355266 2019-10-31 12:32 ./testing/source/PAM/a/libpwquality/libpwquality-1.4.2.tar.lz +-rwxr-xr-x 1 root root 4541 2020-02-10 18:49 ./testing/source/PAM/a/libpwquality/libpwquality.SlackBuild +-rw-r--r-- 1 root root 45 2020-02-09 19:24 ./testing/source/PAM/a/libpwquality/libpwquality.url +-rw-r--r-- 1 root root 954 2020-02-09 19:28 ./testing/source/PAM/a/libpwquality/slack-desc +drwxr-xr-x 4 root root 4096 2020-01-02 20:41 ./testing/source/PAM/a/pam +-rw-r--r-- 1 root root 907248 2018-05-18 11:53 ./testing/source/PAM/a/pam/Linux-PAM-1.3.1.tar.lz +-rw-r--r-- 1 root root 252 2014-07-26 06:55 ./testing/source/PAM/a/pam/doinst.sh.gz +drwxr-xr-x 2 root root 4096 2019-07-16 18:13 ./testing/source/PAM/a/pam/fedora-patches +-rw-r--r-- 1 root root 487 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.3-nouserenv.patch.gz +-rw-r--r-- 1 root root 534 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.6-limits-user.patch.gz +-rw-r--r-- 1 root root 541 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-audit-user-mgmt.patch.gz +-rw-r--r-- 1 root root 923 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-full-relro.patch.gz +-rw-r--r-- 1 root root 6901 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-pwhistory-helper.patch.gz +-rw-r--r-- 1 root root 464 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-unix-nomsg.patch.gz +-rw-r--r-- 1 root root 2291 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-coverity.patch.gz +-rw-r--r-- 1 root root 6056 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-motd-multiple-paths.patch.gz +-rw-r--r-- 1 root root 416 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-noflex.patch.gz +-rw-r--r-- 1 root root 1153 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-redhat-modules.patch.gz +-rw-r--r-- 1 root root 783 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-bcrypt_b.patch.gz +-rw-r--r-- 1 root root 1309 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-checksalt_syslog.patch.gz +-rw-r--r-- 1 root root 910 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-crypt_checksalt.patch.gz +-rw-r--r-- 1 root root 1410 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-fix_checksalt_syslog.patch.gz +-rw-r--r-- 1 root root 1373 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-gensalt-autoentropy.patch.gz +-rw-r--r-- 1 root root 887 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-no-fallback.patch.gz +-rw-r--r-- 1 root root 698 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-remove-obsolete-_unix_read_password-prototype.patch.gz +-rw-r--r-- 1 root root 4944 2019-02-02 06:05 ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-yescrypt.patch.gz +-rw-rw-r-- 1 root root 44588 2018-12-04 08:15 ./testing/source/PAM/a/pam/pam-redhat-1.0.0.tar.lz +-rwxr-xr-x 1 root root 8740 2020-02-05 06:34 ./testing/source/PAM/a/pam/pam.SlackBuild +-rw-r--r-- 1 root root 106 2019-07-16 18:05 ./testing/source/PAM/a/pam/pam.url +drwxr-xr-x 2 root root 4096 2020-01-02 20:41 ./testing/source/PAM/a/pam/patches +-rw-r--r-- 1 root root 386 2020-01-02 20:41 ./testing/source/PAM/a/pam/patches/pam.etc.environment.better.comments.diff.gz +-rw-r--r-- 1 root root 794 2019-07-16 20:05 ./testing/source/PAM/a/pam/patches/pam.pam_tally2.no.fsync.patch.gz +-rw-r--r-- 1 root root 309 2019-07-16 18:49 ./testing/source/PAM/a/pam/patches/pam.pam_tally2.slackware.diff.gz +-rw-r--r-- 1 root root 873 2019-07-16 20:25 ./testing/source/PAM/a/pam/slack-desc +-rwxr-xr-x 1 root root 324 2020-02-05 06:48 ./testing/source/PAM/build-all-pam-packages.sh +-rw-r--r-- 1 root root 1235 2020-02-10 20:29 ./testing/source/PAM/buildlist +-rwxr-xr-x 1 root root 14025 2018-11-20 03:08 ./testing/source/PAM/make_world.sh +lrwxrwxrwx 1 root root 15 2020-02-05 04:56 ./testing/source/PAM/source -> ../../../source +drwxr-xr-x 2 root root 4096 2020-02-12 00:42 ./usb-and-pxe-installers -rw-r--r-- 1 root root 31203 2011-03-21 21:21 ./usb-and-pxe-installers/README_PXE.TXT -rw-r--r-- 1 root root 9197 2013-09-25 04:33 ./usb-and-pxe-installers/README_USB.TXT -rw-r--r-- 1 root root 574 2013-03-27 04:59 ./usb-and-pxe-installers/pxelinux.cfg_default --rw-r--r-- 1 root root 55260160 2020-02-06 01:58 ./usb-and-pxe-installers/usbboot.img +-rw-r--r-- 1 root root 55264256 2020-02-12 00:41 ./usb-and-pxe-installers/usbboot.img -rw-r--r-- 1 root root 16042 2019-08-05 07:08 ./usb-and-pxe-installers/usbimg2disk.sh diff --git a/README.initrd b/README.initrd index 801e1b34..0abfee93 100644 --- a/README.initrd +++ b/README.initrd @@ -1,7 +1,7 @@ Slackware initrd mini HOWTO by Patrick Volkerding, volkerdi@slackware.com -Thu Feb 6 01:37:10 UTC 2020 +Tue Feb 11 23:40:44 UTC 2020 This document describes how to create and install an initrd, which may be required to use the 4.x kernel. Also see "man mkinitrd". @@ -33,15 +33,15 @@ flexible to ship a generic kernel and a set of kernel modules for it. The easiest way to make the initrd is to use the mkinitrd script included in Slackware's mkinitrd package. We'll walk through the process of -upgrading to the generic 5.4.18 Linux kernel using the packages +upgrading to the generic 5.4.19 Linux kernel using the packages found in Slackware's slackware/a/ directory. First, make sure the kernel, kernel modules, and mkinitrd package are installed (the current version numbers might be a little different, so this is just an example): - installpkg kernel-generic-5.4.18-x86_64-1.txz - installpkg kernel-modules-5.4.18-x86_64-1.txz + installpkg kernel-generic-5.4.19-x86_64-1.txz + installpkg kernel-modules-5.4.19-x86_64-1.txz installpkg mkinitrd-1.4.11-x86_64-14.txz Change into the /boot directory: @@ -52,7 +52,7 @@ Now you'll want to run "mkinitrd". I'm using ext4 for my root filesystem, and since the disk controller requires no special support the ext4 module will be the only one I need to load: - mkinitrd -c -k 5.4.18 -m ext4 + mkinitrd -c -k 5.4.19 -m ext4 This should do two things. First, it will create a directory /boot/initrd-tree containing the initrd's filesystem. Then it will @@ -61,10 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and then run mkinitrd again without options to rebuild the image. That's optional, though, and only advanced users will need to think about that. -Here's another example: Build an initrd image using Linux 5.4.18 +Here's another example: Build an initrd image using Linux 5.4.19 kernel modules for a system with an ext4 root partition on /dev/sdb3: - mkinitrd -c -k 5.4.18 -m ext4 -f ext4 -r /dev/sdb3 + mkinitrd -c -k 5.4.19 -m ext4 -f ext4 -r /dev/sdb3 4. Now that I've built an initrd, how do I use it? diff --git a/isolinux/message.txt b/isolinux/message.txt index 1257753f..e619fe2f 100644 --- a/isolinux/message.txt +++ b/isolinux/message.txt @@ -1,5 +1,5 @@ -Welcome to 09Slackware6407 version 15.0 (Linux kernel 5.4.18)! +Welcome to 09Slackware6407 version 15.0 (Linux kernel 5.4.19)! If you need to pass extra parameters to the kernel, enter them at the prompt below after the name of the kernel to boot (e.g., huge.s). diff --git a/kernels/VERSIONS.TXT b/kernels/VERSIONS.TXT index 67e2481a..57f3e86d 100644 --- a/kernels/VERSIONS.TXT +++ b/kernels/VERSIONS.TXT @@ -1,3 +1,3 @@ -These kernels are version 5.4.18. +These kernels are version 5.4.19. diff --git a/recompress.sh b/recompress.sh index 371f16d4..f4e11329 100755 --- a/recompress.sh +++ b/recompress.sh @@ -1257,19 +1257,29 @@ gzip ./source/x/x11/patch/xf86-video-intel/0001-sna-Avoid-clobbering-output-phys gzip ./source/x/x11/patch/xf86-video-s3virge/xf86-video-s3virge.xorg-server-1.20.x.diff gzip ./source/x/libglvnd/patches/193.patch gzip ./source/x/xcm/xcm.udev.rules.diff -gzip ./testing/source/glibc/glibc.ru_RU.CP1251.diff -gzip ./testing/source/glibc/glibc.locale.no-archive.diff -gzip ./testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff -gzip ./testing/source/glibc/glibc-c-utf8-locale.patch -gzip ./testing/source/binutils/patches/binutils-2.20.51.0.10-sec-merge-emit.patch -gzip ./testing/source/binutils/patches/binutils-2.24-ldforcele.patch -gzip ./testing/source/binutils/patches/binutils-2.20.51.0.2-libtool-lib64.patch -gzip ./testing/source/binutils/patches/binutils.export.demangle.h.diff -gzip ./testing/source/binutils/patches/binutils-2.25.1-cleansweep.patch -gzip ./testing/source/binutils/patches/binutils-2.25-set-long-long.patch -gzip ./testing/source/binutils/patches/binutils.no-config-h-check.diff -gzip ./testing/source/binutils/patches/binutils-2.20.51.0.10-copy-osabi.patch -gzip ./testing/source/binutils/patches/binutils-2.25-version.patch +gzip ./testing/source/PAM/a/libpwquality/doinst.sh +gzip ./testing/source/PAM/a/pam/patches/pam.pam_tally2.slackware.diff +gzip ./testing/source/PAM/a/pam/patches/pam.pam_tally2.no.fsync.patch +gzip ./testing/source/PAM/a/pam/patches/pam.etc.environment.better.comments.diff +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-gensalt-autoentropy.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-redhat-modules.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-no-fallback.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-motd-multiple-paths.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-checksalt_syslog.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-audit-user-mgmt.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-full-relro.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.3-nouserenv.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-remove-obsolete-_unix_read_password-prototype.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-crypt_checksalt.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-fix_checksalt_syslog.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-noflex.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-bcrypt_b.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-yescrypt.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-coverity.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.1.6-limits-user.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-pwhistory-helper.patch +gzip ./testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-unix-nomsg.patch +gzip ./testing/source/PAM/a/pam/doinst.sh gzip ./pasture/source/php/php-fpm.conf.diff gzip ./pasture/source/php/doinst.sh gzip ./pasture/source/php/PHP-5.6.31-OpenSSL-1.1.0-compatibility-20170801.patch diff --git a/slackware64/a/maketag b/slackware64/a/maketag index 5d8e5b07..ba260b1e 100644 --- a/slackware64/a/maketag +++ b/slackware64/a/maketag @@ -61,9 +61,9 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "jfsutils" "Utilities for IBM's Journaled Filesystem" "on" \ "kbd" "Change keyboard and console mappings" "on" \ "kernel-firmware" "Linux kernel firmware -- REQUIRED" "on" \ -"kernel-generic" "Generic 5.4.18 kernel (needs an initrd)" "on" \ -"kernel-huge" "Loaded 5.4.18 Linux kernel" "on" \ -"kernel-modules" "Linux 5.4.18 kernel modules -- REQUIRED" "on" \ +"kernel-generic" "Generic 5.4.19 kernel (needs an initrd)" "on" \ +"kernel-huge" "Loaded 5.4.19 Linux kernel" "on" \ +"kernel-modules" "Linux 5.4.19 kernel modules -- REQUIRED" "on" \ "kmod" "Kernel module utilities -- REQUIRED" "on" \ "lbzip2" "Parallel bzip2 compressor" "on" \ "less" "A text pager utility - REQUIRED" "on" \ diff --git a/slackware64/a/maketag.ez b/slackware64/a/maketag.ez index 5d8e5b07..ba260b1e 100644 --- a/slackware64/a/maketag.ez +++ b/slackware64/a/maketag.ez @@ -61,9 +61,9 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "jfsutils" "Utilities for IBM's Journaled Filesystem" "on" \ "kbd" "Change keyboard and console mappings" "on" \ "kernel-firmware" "Linux kernel firmware -- REQUIRED" "on" \ -"kernel-generic" "Generic 5.4.18 kernel (needs an initrd)" "on" \ -"kernel-huge" "Loaded 5.4.18 Linux kernel" "on" \ -"kernel-modules" "Linux 5.4.18 kernel modules -- REQUIRED" "on" \ +"kernel-generic" "Generic 5.4.19 kernel (needs an initrd)" "on" \ +"kernel-huge" "Loaded 5.4.19 Linux kernel" "on" \ +"kernel-modules" "Linux 5.4.19 kernel modules -- REQUIRED" "on" \ "kmod" "Kernel module utilities -- REQUIRED" "on" \ "lbzip2" "Parallel bzip2 compressor" "on" \ "less" "A text pager utility - REQUIRED" "on" \ diff --git a/slackware64/k/maketag b/slackware64/k/maketag index 74965d83..27ee052b 100644 --- a/slackware64/k/maketag +++ b/slackware64/k/maketag @@ -21,7 +21,7 @@ from series K. Use the UP/DOWN keys to scroll through the list, and \ the SPACE key to deselect any items you don't want to install. \ Press ENTER when you are \ done." 11 70 1 \ -"kernel-source" "Linux 5.4.18 kernel source" "on" \ +"kernel-source" "Linux 5.4.19 kernel source" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs diff --git a/slackware64/k/maketag.ez b/slackware64/k/maketag.ez index 74965d83..27ee052b 100644 --- a/slackware64/k/maketag.ez +++ b/slackware64/k/maketag.ez @@ -21,7 +21,7 @@ from series K. Use the UP/DOWN keys to scroll through the list, and \ the SPACE key to deselect any items you don't want to install. \ Press ENTER when you are \ done." 11 70 1 \ -"kernel-source" "Linux 5.4.18 kernel source" "on" \ +"kernel-source" "Linux 5.4.19 kernel source" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs diff --git a/source/a/shadow/shadow.SlackBuild b/source/a/shadow/shadow.SlackBuild index 360da370..bc22d5e8 100755 --- a/source/a/shadow/shadow.SlackBuild +++ b/source/a/shadow/shadow.SlackBuild @@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd) PKGNAM=shadow VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then diff --git a/source/k/kernel-configs/config-generic-5.4.18 b/source/k/kernel-configs/config-generic-5.4.19 index e4ae754d..7e8bedaa 100644 --- a/source/k/kernel-configs/config-generic-5.4.18 +++ b/source/k/kernel-configs/config-generic-5.4.19 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.18 Kernel Configuration +# Linux/x86 5.4.19 Kernel Configuration # # @@ -7803,7 +7803,7 @@ CONFIG_PM_OPP=y # File systems # CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y diff --git a/source/k/kernel-configs/config-generic-5.4.18.x64 b/source/k/kernel-configs/config-generic-5.4.19.x64 index a16adf40..6937b960 100644 --- a/source/k/kernel-configs/config-generic-5.4.18.x64 +++ b/source/k/kernel-configs/config-generic-5.4.19.x64 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.18 Kernel Configuration +# Linux/x86 5.4.19 Kernel Configuration # # @@ -7786,7 +7786,7 @@ CONFIG_PM_OPP=y # File systems # CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y diff --git a/source/k/kernel-configs/config-generic-smp-5.4.18-smp b/source/k/kernel-configs/config-generic-smp-5.4.19-smp index 97dd80d8..256b5074 100644 --- a/source/k/kernel-configs/config-generic-smp-5.4.18-smp +++ b/source/k/kernel-configs/config-generic-smp-5.4.19-smp @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.18 Kernel Configuration +# Linux/x86 5.4.19 Kernel Configuration # # @@ -7866,7 +7866,7 @@ CONFIG_PM_OPP=y # File systems # CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y diff --git a/source/k/kernel-configs/config-huge-5.4.18 b/source/k/kernel-configs/config-huge-5.4.19 index 003d2ea8..e92aca88 100644 --- a/source/k/kernel-configs/config-huge-5.4.18 +++ b/source/k/kernel-configs/config-huge-5.4.19 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.18 Kernel Configuration +# Linux/x86 5.4.19 Kernel Configuration # # @@ -7803,7 +7803,7 @@ CONFIG_PM_OPP=y # File systems # CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y diff --git a/source/k/kernel-configs/config-huge-5.4.18.x64 b/source/k/kernel-configs/config-huge-5.4.19.x64 index b089fcfc..696055d0 100644 --- a/source/k/kernel-configs/config-huge-5.4.18.x64 +++ b/source/k/kernel-configs/config-huge-5.4.19.x64 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.18 Kernel Configuration +# Linux/x86 5.4.19 Kernel Configuration # # @@ -7786,7 +7786,7 @@ CONFIG_PM_OPP=y # File systems # CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y diff --git a/source/k/kernel-configs/config-huge-smp-5.4.18-smp b/source/k/kernel-configs/config-huge-smp-5.4.19-smp index 83a1e147..23068ddd 100644 --- a/source/k/kernel-configs/config-huge-smp-5.4.18-smp +++ b/source/k/kernel-configs/config-huge-smp-5.4.19-smp @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.18 Kernel Configuration +# Linux/x86 5.4.19 Kernel Configuration # # @@ -7866,7 +7866,7 @@ CONFIG_PM_OPP=y # File systems # CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y diff --git a/source/n/libksba/libksba.SlackBuild b/source/n/libksba/libksba.SlackBuild index fd96cd8c..d890ab46 100755 --- a/source/n/libksba/libksba.SlackBuild +++ b/source/n/libksba/libksba.SlackBuild @@ -100,7 +100,7 @@ rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find $PKG/usr/man -type -f -exec gzip -9 {} \+ +find $PKG/usr/man -type f -exec gzip -9 {} \+ rm -f $PKG/usr/info/dir gzip -9 $PKG/usr/info/* diff --git a/testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txt b/testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txt new file mode 100644 index 00000000..ef6a179a --- /dev/null +++ b/testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +ConsoleKit2: ConsoleKit2 (user, login, and seat tracking framework) +ConsoleKit2: +ConsoleKit2: ConsoleKit2 is a framework for defining and tracking users, login +ConsoleKit2: sessions, and seats. +ConsoleKit2: +ConsoleKit2: Homepage: https://github.com/ConsoleKit2/ConsoleKit2 +ConsoleKit2: +ConsoleKit2: +ConsoleKit2: +ConsoleKit2: +ConsoleKit2: diff --git a/testing/packages/PAM/at-3.2.1-x86_64-1_pam.txt b/testing/packages/PAM/at-3.2.1-x86_64-1_pam.txt new file mode 100644 index 00000000..acbeeeee --- /dev/null +++ b/testing/packages/PAM/at-3.2.1-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +at: at (delayed command execution) +at: +at: at and batch read shell commands from standard input (or a specified +at: file) storing them as a job to be scheduled for execution at a later +at: time. +at: +at: The 'at' command was written by David Parsons and Thomas Koenig. +at: +at: Homepage: http://blog.calhariz.com/tag/at +at: +at: diff --git a/testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txt b/testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txt new file mode 100644 index 00000000..cdd5c072 --- /dev/null +++ b/testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +cifs-utils: cifs-utils (CIFS filesystem utilities) +cifs-utils: +cifs-utils: This is the release version of cifs-utils, a package of utilities for +cifs-utils: doing and managing mounts of the Linux CIFS filesystem. The in-kernel +cifs-utils: CIFS filesystem is generally the preferred method for mounting +cifs-utils: SMB/CIFS shares on Linux. This filesystem relies on a set of +cifs-utils: user-space tools that were originally part of Samba, but have now been +cifs-utils: split off into this separate package. +cifs-utils: +cifs-utils: Home page: http://wiki.samba.org/index.php/LinuxCIFS_utils +cifs-utils: diff --git a/testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txt b/testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txt new file mode 100644 index 00000000..8b084ab0 --- /dev/null +++ b/testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +cracklib: cracklib (password checking library) +cracklib: +cracklib: CrackLib is a library which may be used in a passwd-like program to +cracklib: prevent users from choosing passwords that could be easily guessed. +cracklib: This package is an updated and modernized distribution of CrackLib as +cracklib: previously released by Alec Muffett. +cracklib: +cracklib: Homepage: https://github.com/cracklib/cracklib +cracklib: +cracklib: +cracklib: diff --git a/testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txt b/testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txt new file mode 100644 index 00000000..f581115e --- /dev/null +++ b/testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +cups: cups (Common UNIX Printing System) +cups: +cups: The Common UNIX Printing System provides a portable printing layer for +cups: UNIX(R)-like operating systems. It has been developed by Easy Software +cups: Products to promote a standard printing solution for all UNIX vendors +cups: and users. CUPS uses the Internet Printing Protocol ("IPP") as the +cups: basis for managing print jobs and queues. The CUPS package includes +cups: System V and Berkeley command-line interfaces, a PostScript RIP +cups: package for supporting non-PostScript printer drivers, and tools for +cups: creating additional printer drivers and other CUPS services. +cups: diff --git a/testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txt b/testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txt new file mode 100644 index 00000000..59a42e27 --- /dev/null +++ b/testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +cyrus-sasl: cyrus-sasl (Simple Authentication and Security Layer) +cyrus-sasl: +cyrus-sasl: This is the Cyrus SASL library. Cyrus SASL is used by mail programs +cyrus-sasl: on the client or server side to provide authentication and +cyrus-sasl: authorization services. See RFC 2222 for more information. +cyrus-sasl: +cyrus-sasl: +cyrus-sasl: +cyrus-sasl: +cyrus-sasl: +cyrus-sasl: diff --git a/testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txt b/testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txt new file mode 100644 index 00000000..f7e7c9cc --- /dev/null +++ b/testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +dovecot: dovecot (IMAP and POP3 server) +dovecot: +dovecot: Dovecot is an open source IMAP and POP3 server for Linux/UNIX-like +dovecot: systems, written with security foremost in mind. +dovecot: +dovecot: Dovecot can work with standard mbox and Maildir formats and it is +dovecot: fully compatible with UW-IMAP and Courier IMAP servers' +dovecot: implementation of them, as well as mail clients accessing the +dovecot: mailboxes directly. +dovecot: +dovecot: diff --git a/testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txt b/testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txt new file mode 100644 index 00000000..030f0c90 --- /dev/null +++ b/testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +gnome-keyring: gnome-keyring (a tool to handle security credentials) +gnome-keyring: +gnome-keyring: GNOME Keyring is a program designed to take care of the user's +gnome-keyring: security credentials, such as user names and passwords, in an +gnome-keyring: easy to access manner. The keyring is implemented as a daemon +gnome-keyring: and uses the process name gnome-keyring-daemon. +gnome-keyring: +gnome-keyring: +gnome-keyring: +gnome-keyring: +gnome-keyring: diff --git a/testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txt b/testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txt new file mode 100644 index 00000000..b7b12a3b --- /dev/null +++ b/testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +hplip: hplip (HP print/scan/fax support) +hplip: +hplip: HPLIP is an HP developed solution for printing, scanning, and faxing +hplip: with HP inkjet and laser based printers in Linux. The HPLIP project +hplip: provides printing support for more than 1400 HP printer models, +hplip: including Deskjet, Officejet, Photosmart, PSC (Print Scan Copy), +hplip: Business Inkjet, LaserJet, and LaserJet MFP. +hplip: +hplip: Homepage: http://hplipopensource.com +hplip: +hplip: diff --git a/testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txt b/testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txt new file mode 100644 index 00000000..88fef50d --- /dev/null +++ b/testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txt @@ -0,0 +1,11 @@ +kde-workspace: kde-workspace (KDE Plasma Desktop) +kde-workspace: +kde-workspace: This package provides the essential parts of the KDE Plasma Desktop +kde-workspace: that are presented to the user. +kde-workspace: +kde-workspace: +kde-workspace: +kde-workspace: +kde-workspace: +kde-workspace: +kde-workspace: diff --git a/testing/packages/PAM/libcap-2.31-x86_64-1_pam.txt b/testing/packages/PAM/libcap-2.31-x86_64-1_pam.txt new file mode 100644 index 00000000..d40f202e --- /dev/null +++ b/testing/packages/PAM/libcap-2.31-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +libcap: libcap (get/set POSIX capabilities) +libcap: +libcap: This is a library for getting and setting POSIX.1e (formerly POSIX 6) +libcap: draft 15 capabilities. +libcap: +libcap: Libcap was written by Andrew G. Morgan; however, it would not +libcap: have been possible without the help of Aleph1, Roland Buresund, +libcap: Andrew Main, and Alexander Kjeldaas. +libcap: +libcap: Homepage: http://sites.google.com/site/fullycapable/ +libcap: diff --git a/testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txt b/testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txt new file mode 100644 index 00000000..23b5774d --- /dev/null +++ b/testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txt @@ -0,0 +1,11 @@ +libcgroup: libcgroup (library and utilities for kernel control groups) +libcgroup: +libcgroup: Control Groups provide a mechanism for aggregating/partitioning sets of +libcgroup: tasks, and all their future children, into hierarchical groups with +libcgroup: specialized behaviour. It makes use of a filesystem interface. +libcgroup: This package contains a library for developing applications that use +libcgroup: control groups, as well as some basic userspace tools for controlling +libcgroup: and monitoring control groups. +libcgroup: +libcgroup: Homepage: http://libcg.sourceforge.net/ +libcgroup: diff --git a/testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txt b/testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txt new file mode 100644 index 00000000..f1146549 --- /dev/null +++ b/testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +libpwquality: libpwquality (password quality checking library) +libpwquality: +libpwquality: The libpwquality package provides common functions for password +libpwquality: quality checking and also scoring them based on their apparent +libpwquality: randomness. The library also provides a function for generating +libpwquality: random passwords with good pronounceability. +libpwquality: +libpwquality: Homepage: https://github.com/libpwquality/libpwquality +libpwquality: +libpwquality: +libpwquality: diff --git a/testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txt b/testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txt new file mode 100644 index 00000000..d4500582 --- /dev/null +++ b/testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +mariadb: mariadb (Drop-in replacement for the MySQL Database Server) +mariadb: +mariadb: MariaDB is a backward compatible, drop-in replacement branch of the +mariadb: MySQL(R) Database Server. It includes all major open source storage +mariadb: engines, including the Aria storage engine. +mariadb: +mariadb: Homepage: http://mariadb.org/ +mariadb: +mariadb: +mariadb: +mariadb: diff --git a/testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txt b/testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txt new file mode 100644 index 00000000..f66b47ad --- /dev/null +++ b/testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +netatalk: netatalk (Appletalk file and print server) +netatalk: +netatalk: Netatalk is an Appletalk file and print server for Linux. Using +netatalk: Netatalk, Macintosh computers on your local network can mount Linux +netatalk: volumes as if they were standard Appletalk network drives, and can +netatalk: print to the Linux box's printer as if it were a network printer +netatalk: supporting PostScript. +netatalk: +netatalk: Netatalk was originally written by the Research Systems Unix Group at +netatalk: The University of Michigan, and is maintained by the Netatalk Team. +netatalk: diff --git a/testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txt b/testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txt new file mode 100644 index 00000000..f0884223 --- /dev/null +++ b/testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +netkit-rsh: netkit-rsh (the BSD rsh/rcp/rlogin clients and daemon) +netkit-rsh: +netkit-rsh: The old BSD rsh suite. Note that none of these programs provide +netkit-rsh: encryption or strong authentication of network connections. As such, +netkit-rsh: their use is discouraged. The "ssh" protocol and package is a +netkit-rsh: cryptographically secure replacement. +netkit-rsh: +netkit-rsh: +netkit-rsh: +netkit-rsh: +netkit-rsh: diff --git a/testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txt b/testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txt new file mode 100644 index 00000000..dca51ed4 --- /dev/null +++ b/testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +openssh: openssh (Secure Shell daemon and clients) +openssh: +openssh: ssh (Secure Shell) is a program for logging into a remote machine and +openssh: for executing commands on a remote machine. It is intended to replace +openssh: rlogin and rsh, and provide secure encrypted communications between +openssh: two untrusted hosts over an insecure network. sshd (SSH Daemon) is +openssh: the daemon program for ssh. OpenSSH is based on the last free version +openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron +openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and +openssh: Dug Song. It has a homepage at http://www.openssh.com/ +openssh: diff --git a/testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txt b/testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txt new file mode 100644 index 00000000..73bb76e0 --- /dev/null +++ b/testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +openvpn: openvpn (secure IP tunnel daemon) +openvpn: +openvpn: OpenVPN is a full-featured SSL VPN which can accommodate a wide range +openvpn: of configurations, including remote access, site-to-site VPNs, WiFi +openvpn: security, and enterprise-scale remote access with load balancing, +openvpn: failover, and fine-grained access-controls. +openvpn: +openvpn: OpenVPN's home on the net is: http://openvpn.net +openvpn: +openvpn: +openvpn: diff --git a/testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txt b/testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txt new file mode 100644 index 00000000..eeab9203 --- /dev/null +++ b/testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +pam: pam (Pluggable Authentication Modules) +pam: +pam: PAM = Pluggable Authentication Modules. Basically, it is a flexible +pam: mechanism for authenticating users. PAM provides a way to develop +pam: programs that are independent of authentication scheme. However, +pam: these programs will need "authentication modules" (and libpam) at +pam: run-time in order to work. +pam: +pam: Homepage: http://www.linux-pam.org/ +pam: +pam: diff --git a/testing/packages/PAM/polkit-0.116-x86_64-1_pam.txt b/testing/packages/PAM/polkit-0.116-x86_64-1_pam.txt new file mode 100644 index 00000000..3fab4403 --- /dev/null +++ b/testing/packages/PAM/polkit-0.116-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +polkit: polkit (authentication framework) +polkit: +polkit: PolicyKit is an application-level toolkit for defining and handling +polkit: the policy that allows unprivileged processes to speak to privileged +polkit: processes. PolicyKit is specifically targeting applications in rich +polkit: desktop environments on multi-user UNIX-like operating systems. +polkit: +polkit: Homepage: http://www.freedesktop.org/wiki/Software/polkit +polkit: +polkit: +polkit: diff --git a/testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txt b/testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txt new file mode 100644 index 00000000..cb139b1f --- /dev/null +++ b/testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txt @@ -0,0 +1,11 @@ +popa3d: popa3d (a POP3 daemon) +popa3d: +popa3d: popa3d is a Post Office Protocol version 3 (POP3) server. A POP3 +popa3d: server operates on local mailboxes on behalf of its remote users. +popa3d: Users can connect at any time to check their mailbox and fetch the +popa3d: mail that has accumulated. The design goals of this POP3 server are +popa3d: security, reliability, RFC compliance (slightly relaxed to work with +popa3d: real-world POP3 clients), and high performance. +popa3d: +popa3d: The popa3d daemon was written by Solar Designer. +popa3d: diff --git a/testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txt b/testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txt new file mode 100644 index 00000000..100076d0 --- /dev/null +++ b/testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txt @@ -0,0 +1,11 @@ +ppp: ppp (Point-to-Point Protocol) +ppp: +ppp: The Point-to-Point Protocol (PPP) provides a method for transmitting +ppp: data over serial links. It's commonly used for connecting to the +ppp: Internet using a modem. This package includes the PPP daemon (pppd), +ppp: which negotiates with the peer to establish the link and sets up the +ppp: ppp network interface, and pppsetup, an easy-to-use utility for +ppp: setting up your PPP daemon. +ppp: +ppp: +ppp: diff --git a/testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txt b/testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txt new file mode 100644 index 00000000..44ba1eb0 --- /dev/null +++ b/testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +proftpd: proftpd (FTP server daemon) +proftpd: +proftpd: ProFTPD is the Professional File Transfer Protocol (FTP) server +proftpd: daemon. ProFTPD grew out of the desire to have a secure and +proftpd: configurable FTP server, and out of a significant admiration of the +proftpd: Apache web server. +proftpd: +proftpd: Homepage: http://www.proftpd.org +proftpd: +proftpd: +proftpd: diff --git a/testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txt b/testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txt new file mode 100644 index 00000000..e1800f15 --- /dev/null +++ b/testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +samba: samba (CIFS file and print server) +samba: +samba: Samba is a CIFS file and print server for CIFS clients. It allows +samba: you to make file space or printers on a Samba host available to CIFS +samba: clients (such as PCs running Windows). +samba: +samba: If you have any Windows file servers, you may be able to replace them +samba: or supplement them with Samba. One of Samba's big strengths is +samba: integration, so you can use it to tie together your Linux hosts and +samba: Windows PC clients. +samba: diff --git a/testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txt b/testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txt new file mode 100644 index 00000000..1566120e --- /dev/null +++ b/testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +screen: screen (screen manager with VT100/ANSI terminal emulation) +screen: +screen: Screen is a full-screen window manager that multiplexes a physical +screen: terminal between several processes (typically interactive shells). +screen: Each virtual terminal provides the functions of a DEC VT100 terminal +screen: and several control functions from the ISO 6492 (ECMA 48, ANSI X3.64) +screen: and ISO 2022 standards (e.g. insert/delete line and support for +screen: multiple character sets). There is a scrollback history buffer for +screen: each virtual terminal and a copy-and-paste mechanism that allows +screen: moving text regions between windows. +screen: diff --git a/testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txt b/testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txt new file mode 100644 index 00000000..29a3d574 --- /dev/null +++ b/testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +shadow: shadow (shadow password suite) +shadow: +shadow: This package includes the necessary programs for handling account +shadow: information in the shadow password format, plus programs for managing +shadow: user and group accounts. It was written by Julianne Frances Haugh and +shadow: the Linux port is maintained by Tomasz Kloczko. +shadow: +shadow: Homepage: https://github.com/shadow-maint/shadow +shadow: +shadow: +shadow: diff --git a/testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txt b/testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txt new file mode 100644 index 00000000..427ea553 --- /dev/null +++ b/testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +sudo: sudo (give limited root privileges to certain users) +sudo: +sudo: 'sudo' is a command that allows users to execute some commands as +sudo: root. The /etc/sudoers file (edited with 'visudo') specifies which +sudo: users have access to sudo and which commands they can run. 'sudo' +sudo: logs all its activities to /var/log/ so the system administrator +sudo: can keep an eye on things. +sudo: +sudo: Homepage: https://www.sudo.ws +sudo: +sudo: diff --git a/testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txt b/testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txt new file mode 100644 index 00000000..0e58e872 --- /dev/null +++ b/testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txt @@ -0,0 +1,11 @@ +system-config-printer: system-config-printer (CUPS printer administration tool) +system-config-printer: +system-config-printer: The purpose of the tool is to configure a CUPS server (often the local +system-config-printer: machine) using the CUPS API. The tool is written in Python, using +system-config-printer: pygtk for the graphical parts and Python bindings (pycups) for the +system-config-printer: CUPS API. It is largely the same as using the CUPS web interface for +system-config-printer: configuring printers, but has the advantage of being a native +system-config-printer: application rather than a web page. +system-config-printer: +system-config-printer: Home: https://github.com/zdohnal/system-config-printer +system-config-printer: diff --git a/testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txt b/testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txt new file mode 100644 index 00000000..7e4aa7b7 --- /dev/null +++ b/testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +util-linux: util-linux (a huge collection of essential utilities) +util-linux: +util-linux: The util-linux package is a huge collection of random utilities +util-linux: that are essential to run a Linux system. +util-linux: +util-linux: Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ +util-linux: +util-linux: +util-linux: +util-linux: +util-linux: diff --git a/testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txt b/testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txt new file mode 100644 index 00000000..47182b36 --- /dev/null +++ b/testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txt @@ -0,0 +1,11 @@ +vsftpd: vsftpd (Very Secure FTP Daemon) +vsftpd: +vsftpd: vsftpd is an FTP server, or daemon. The 'vs' stands for Very Secure. +vsftpd: Obviously this is not a guarantee, but a reflection that the entire +vsftpd: codebase was written with security in mind, and carefully designed to +vsftpd: be resilient to attack (as well as extremely fast and scalable). +vsftpd: +vsftpd: The vsftpd homepage is https://security.appspot.com/vsftpd.html +vsftpd: +vsftpd: The Very Secure FTP Daemon was written by Chris Evans. +vsftpd: diff --git a/testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txt b/testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txt new file mode 100644 index 00000000..507599a6 --- /dev/null +++ b/testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txt @@ -0,0 +1,11 @@ +xdm: xdm (X11 display manager) +xdm: +xdm: xdm is part of X11. +xdm: +xdm: For more information about the X.Org Foundation (the providers of the +xdm: X.Org implementation of the X Window System), see their website: +xdm: +xdm: http://www.x.org +xdm: +xdm: +xdm: diff --git a/testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txt b/testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txt new file mode 100644 index 00000000..080d3280 --- /dev/null +++ b/testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +xlockmore: xlockmore (screen locker for X) +xlockmore: +xlockmore: Patrick J. Naughton's xlock screensaver/locker for X, with many +xlockmore: more modes added by David A. Bagley. +xlockmore: +xlockmore: The 'Bob' bitmap has been included especially for Slackware, as well +xlockmore: as a Linux penguin logo. (NOTE: the image of J. R. "Bob" Dobbs is a +xlockmore: registered trademark of The Subgenius Foundation, used by permission) +xlockmore: +xlockmore: Homepage: http://sillycycle.com/xlockmore.html +xlockmore: diff --git a/testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txt b/testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txt new file mode 100644 index 00000000..b94c265b --- /dev/null +++ b/testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txt @@ -0,0 +1,11 @@ +xscreensaver: xscreensaver (a screen saver and locker for X) +xscreensaver: +xscreensaver: A modular screen saver and locker for the X Window System. Highly +xscreensaver: customizable: allows the use of any program that can draw on the +xscreensaver: root window as a display mode. More than 100 display modes are +xscreensaver: included in this package. +xscreensaver: +xscreensaver: Homepage: http://www.jwz.org/xscreensaver +xscreensaver: +xscreensaver: +xscreensaver: diff --git a/testing/source/PAM/a/cracklib/cracklib.SlackBuild b/testing/source/PAM/a/cracklib/cracklib.SlackBuild new file mode 100755 index 00000000..e58c28d7 --- /dev/null +++ b/testing/source/PAM/a/cracklib/cracklib.SlackBuild @@ -0,0 +1,149 @@ +#!/bin/sh + +# Copyright 2010,2011 Vincent Batts, Vienna, VA, USA +# Copyright 2010, 2018 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PKGNAM=cracklib +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" + exit 0 +fi + +NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} + +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1 +cd $PKGNAM-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \+ -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \+ + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --sbindir=/sbin \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --disable-static \ + --without-python \ + --build=$ARCH-slackware-linux || exit 1 + +make $NUMJOBS || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Don't ship .la files: +rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la + +mkdir -p $PKG/usr/share/cracklib + +# Fix perms on these first: +chmod 755 ./util/create-cracklib-dict +chmod 755 ./util/cracklib-format + +# If there's a large word list in the source directory, uncompress it to "cracklib-words": +if [ -r $CWD/cracklib-words-*.xz ]; then + xz -dc $CWD/cracklib-words-*.xz > cracklib-words +elif [ -r $CWD/cracklib-words-*.bz2 ]; then + bzip2 -dc $CWD/cracklib-words-*.bz2 > cracklib-words +elif [ -r $CWD/cracklib-words-*.gz ]; then + gzip -dc $CWD/cracklib-words-*.gz > cracklib-words +elif [ -r $CWD/cracklib-words-*.lz ]; then + lzip -dc $CWD/cracklib-words-*.lz > cracklib-words +fi + +# If cracklib-words exists, add it to the dictionary. Otherwise go with the bundled list. +if [ -r cracklib-words ]; then + PATH=$(pwd)/util:$PATH \ + ./util/create-cracklib-dict \ + -o $PKG/usr/share/cracklib/pw_dict \ + dicts/cracklib-small cracklib-words +else + PATH=$(pwd)/util:$PATH \ + ./util/create-cracklib-dict \ + -o $PKG/usr/share/cracklib/pw_dict \ + dicts/cracklib-small +fi + +mkdir -p $PKG/var/cache/cracklib +( cd $PKG/var/cache/cracklib +ln -s /usr/share/cracklib/pw_dict.pwd cracklib_dict.pwd +ln -s /usr/share/cracklib/pw_dict.pwi cracklib_dict.pwi +) + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING.LIB ChangeLog INSTALL NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/testing/source/PAM/a/cracklib/cracklib.url b/testing/source/PAM/a/cracklib/cracklib.url new file mode 100644 index 00000000..c7afd5ec --- /dev/null +++ b/testing/source/PAM/a/cracklib/cracklib.url @@ -0,0 +1 @@ +https://github.com/cracklib/cracklib diff --git a/testing/source/binutils/slack-desc b/testing/source/PAM/a/cracklib/slack-desc index b2d81d1d..07167861 100644 --- a/testing/source/binutils/slack-desc +++ b/testing/source/PAM/a/cracklib/slack-desc @@ -6,14 +6,14 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -binutils: binutils (GNU binary development tools) -binutils: -binutils: Binutils is a collection of binary utilities. It includes "as" (the -binutils: portable GNU assembler), "ld" (the GNU linker), and other utilities -binutils: for creating and working with binary programs. -binutils: -binutils: These utilities are REQUIRED to compile C, C++, Objective-C, Fortran, -binutils: and most other programming languages. -binutils: -binutils: -binutils: +cracklib: cracklib (password checking library) +cracklib: +cracklib: CrackLib is a library which may be used in a passwd-like program to +cracklib: prevent users from choosing passwords that could be easily guessed. +cracklib: This package is an updated and modernized distribution of CrackLib as +cracklib: previously released by Alec Muffett. +cracklib: +cracklib: Homepage: https://github.com/cracklib/cracklib +cracklib: +cracklib: +cracklib: diff --git a/testing/source/PAM/a/libpwquality/doinst.sh b/testing/source/PAM/a/libpwquality/doinst.sh new file mode 100644 index 00000000..044ad84c --- /dev/null +++ b/testing/source/PAM/a/libpwquality/doinst.sh @@ -0,0 +1,14 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/security/pwquality.conf.new diff --git a/testing/source/PAM/a/libpwquality/libpwquality.SlackBuild b/testing/source/PAM/a/libpwquality/libpwquality.SlackBuild new file mode 100755 index 00000000..ac1555a6 --- /dev/null +++ b/testing/source/PAM/a/libpwquality/libpwquality.SlackBuild @@ -0,0 +1,143 @@ +#!/bin/bash + +# Copyright 2020 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PKGNAM=libpwquality +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$(uname -m)" in + i?86) ARCH=i586 ;; + arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) ARCH=$(uname -m) ;; + esac + export ARCH +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" + exit 0 +fi + +NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +elif [ "$ARCH" = "armv7hl" ]; then + SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16" + LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \+ -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \+ + +# this typo was driving me crazy +sed -i "s/there defaults/their defaults/g" doc/man/pam_pwquality.8* + +# Configure, build, and install: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-static \ + --with-securedir=/lib/security \ + --with-python-binary=python3 \ + --build=$ARCH-slackware-linux || exit 1 +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Don't ship .la files: +rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la + +mv $PKG/etc/security/pwquality.conf $PKG/etc/security/pwquality.conf.new + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress manual pages: +find $PKG/usr/man -type f -exec gzip -9 {} \+ +for i in $( find $PKG/usr/man -type l ) ; do + ln -s $( readlink $i ).gz $i.gz + rm $i +done + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + AUTHORS* ChangeLog COPYING* NEWS* README* \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/testing/source/PAM/a/libpwquality/libpwquality.url b/testing/source/PAM/a/libpwquality/libpwquality.url new file mode 100644 index 00000000..fe741a80 --- /dev/null +++ b/testing/source/PAM/a/libpwquality/libpwquality.url @@ -0,0 +1 @@ +https://github.com/libpwquality/libpwquality diff --git a/testing/source/PAM/a/libpwquality/slack-desc b/testing/source/PAM/a/libpwquality/slack-desc new file mode 100644 index 00000000..0334b2ca --- /dev/null +++ b/testing/source/PAM/a/libpwquality/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libpwquality: libpwquality (password quality checking library) +libpwquality: +libpwquality: The libpwquality package provides common functions for password +libpwquality: quality checking and also scoring them based on their apparent +libpwquality: randomness. The library also provides a function for generating +libpwquality: random passwords with good pronounceability. +libpwquality: +libpwquality: Homepage: https://github.com/libpwquality/libpwquality +libpwquality: +libpwquality: +libpwquality: diff --git a/testing/source/PAM/a/pam/doinst.sh b/testing/source/PAM/a/pam/doinst.sh new file mode 100644 index 00000000..e96721a1 --- /dev/null +++ b/testing/source/PAM/a/pam/doinst.sh @@ -0,0 +1,14 @@ + +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.1.3-nouserenv.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.3-nouserenv.patch new file mode 100644 index 00000000..f3a742c8 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.3-nouserenv.patch @@ -0,0 +1,27 @@ +diff -up pam/modules/pam_env/pam_env.c.nouserenv pam/modules/pam_env/pam_env.c +--- pam/modules/pam_env/pam_env.c.nouserenv 2010-10-20 09:59:30.000000000 +0200 ++++ pam/modules/pam_env/pam_env.c 2010-11-01 14:42:01.000000000 +0100 +@@ -10,7 +10,7 @@ + #define DEFAULT_READ_ENVFILE 1 + + #define DEFAULT_USER_ENVFILE ".pam_environment" +-#define DEFAULT_USER_READ_ENVFILE 1 ++#define DEFAULT_USER_READ_ENVFILE 0 + + #include "config.h" + +diff -up pam/modules/pam_env/pam_env.8.xml.nouserenv pam/modules/pam_env/pam_env.8.xml +--- pam/modules/pam_env/pam_env.8.xml.nouserenv 2010-10-20 09:59:30.000000000 +0200 ++++ pam/modules/pam_env/pam_env.8.xml 2010-11-01 14:42:01.000000000 +0100 +@@ -147,7 +147,10 @@ + <listitem> + <para> + Turns on or off the reading of the user specific environment +- file. 0 is off, 1 is on. By default this option is on. ++ file. 0 is off, 1 is on. By default this option is off as user ++ supplied environment variables in the PAM environment could affect ++ behavior of subsequent modules in the stack without the consent ++ of the system administrator. + </para> + </listitem> + </varlistentry> diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.1.6-limits-user.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.6-limits-user.patch new file mode 100644 index 00000000..3c17b781 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.6-limits-user.patch @@ -0,0 +1,20 @@ +diff -up Linux-PAM-1.1.6/modules/pam_limits/limits.conf.limits Linux-PAM-1.1.6/modules/pam_limits/limits.conf +--- Linux-PAM-1.1.6/modules/pam_limits/limits.conf.limits 2012-08-15 13:08:43.000000000 +0200 ++++ Linux-PAM-1.1.6/modules/pam_limits/limits.conf 2013-03-14 16:43:37.615087671 +0100 +@@ -1,5 +1,16 @@ + # /etc/security/limits.conf + # ++#This file sets the resource limits for the users logged in via PAM. ++#It does not affect resource limits of the system services. ++# ++#Also note that configuration files in /etc/security/limits.d directory, ++#which are read in alphabetical order, override the settings in this ++#file in case the domain is the same or more specific. ++#That means for example that setting a limit for wildcard domain here ++#can be overriden with a wildcard setting in a config file in the ++#subdirectory, but a user specific setting here can be overriden only ++#with a user specific setting in the subdirectory. ++# + #Each line describes a limit for a user in the form: + # + #<domain> <type> <item> <value> diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-audit-user-mgmt.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-audit-user-mgmt.patch new file mode 100644 index 00000000..277a5699 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-audit-user-mgmt.patch @@ -0,0 +1,31 @@ +diff -up Linux-PAM-1.1.8/modules/pam_tally2/pam_tally2.c.audit-user-mgmt Linux-PAM-1.1.8/modules/pam_tally2/pam_tally2.c +--- Linux-PAM-1.1.8/modules/pam_tally2/pam_tally2.c.audit-user-mgmt 2013-06-18 16:11:21.000000000 +0200 ++++ Linux-PAM-1.1.8/modules/pam_tally2/pam_tally2.c 2014-10-17 12:09:12.965490940 +0200 +@@ -997,9 +997,9 @@ main( int argc UNUSED, char **argv ) + #ifdef HAVE_LIBAUDIT + char buf[64]; + int audit_fd = audit_open(); +- snprintf(buf, sizeof(buf), "pam_tally2 uid=%u reset=%hu", uid, cline_reset); +- audit_log_user_message(audit_fd, AUDIT_USER_ACCT, +- buf, NULL, NULL, ttyname(STDIN_FILENO), 1); ++ snprintf(buf, sizeof(buf), "pam_tally2 reset=%hu", cline_reset); ++ audit_log_acct_message(audit_fd, AUDIT_USER_MGMT, NULL, ++ buf, NULL, uid, NULL, NULL, ttyname(STDIN_FILENO), 1); + if (audit_fd >=0) + close(audit_fd); + #endif +@@ -1040,11 +1040,10 @@ main( int argc UNUSED, char **argv ) + } + else if ( !cline_reset ) { + #ifdef HAVE_LIBAUDIT +- char buf[64]; + int audit_fd = audit_open(); +- snprintf(buf, sizeof(buf), "pam_tally2 uid=all reset=0"); +- audit_log_user_message(audit_fd, AUDIT_USER_ACCT, +- buf, NULL, NULL, ttyname(STDIN_FILENO), 1); ++ audit_log_acct_message(audit_fd, AUDIT_USER_MGMT, NULL, ++ "pam_tally2-reset-all-accts reset=0", "*", -1, ++ NULL, NULL, ttyname(STDIN_FILENO), 1); + if (audit_fd >=0) + close(audit_fd); + #endif diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-full-relro.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-full-relro.patch new file mode 100644 index 00000000..b2d8526f --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.1.8-full-relro.patch @@ -0,0 +1,67 @@ +diff -up Linux-PAM-1.1.8/modules/pam_filter/upperLOWER/Makefile.am.relro Linux-PAM-1.1.8/modules/pam_filter/upperLOWER/Makefile.am +--- Linux-PAM-1.1.8/modules/pam_filter/upperLOWER/Makefile.am.relro 2014-09-10 17:17:20.273401344 +0200 ++++ Linux-PAM-1.1.8/modules/pam_filter/upperLOWER/Makefile.am 2014-09-10 17:17:07.857115369 +0200 +@@ -9,7 +9,7 @@ securelibfilterdir = $(SECUREDIR)/pam_fi + + AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \ + -I$(srcdir)/.. @PIE_CFLAGS@ +-AM_LDFLAGS = @PIE_LDFLAGS@ ++AM_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ + LDADD = $(top_builddir)/libpam/libpam.la + + securelibfilter_PROGRAMS = upperLOWER +diff -up Linux-PAM-1.1.8/modules/pam_mkhomedir/Makefile.am.relro Linux-PAM-1.1.8/modules/pam_mkhomedir/Makefile.am +--- Linux-PAM-1.1.8/modules/pam_mkhomedir/Makefile.am.relro 2013-06-18 16:11:21.000000000 +0200 ++++ Linux-PAM-1.1.8/modules/pam_mkhomedir/Makefile.am 2014-09-10 17:18:42.922304935 +0200 +@@ -30,6 +30,8 @@ endif + + sbin_PROGRAMS = mkhomedir_helper + mkhomedir_helper_SOURCES = mkhomedir_helper.c ++mkhomedir_helper_CFLAGS = $(AM_CFLAGS) @PIE_CFLAGS@ ++mkhomedir_helper_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ + mkhomedir_helper_LDADD = $(top_builddir)/libpam/libpam.la + + if ENABLE_REGENERATE_MAN +diff -up Linux-PAM-1.1.8/modules/pam_tally2/Makefile.am.relro Linux-PAM-1.1.8/modules/pam_tally2/Makefile.am +--- Linux-PAM-1.1.8/modules/pam_tally2/Makefile.am.relro 2013-06-18 16:11:21.000000000 +0200 ++++ Linux-PAM-1.1.8/modules/pam_tally2/Makefile.am 2014-09-10 17:22:04.339944040 +0200 +@@ -26,6 +26,8 @@ if HAVE_VERSIONING + pam_tally2_la_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map + endif + ++pam_tally2_CFLAGS = $(AM_CFLAGS) @PIE_CFLAGS@ ++pam_tally2_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ + pam_tally2_LDADD = $(top_builddir)/libpam/libpam.la $(LIBAUDIT) + + securelib_LTLIBRARIES = pam_tally2.la +diff -up Linux-PAM-1.1.8/modules/pam_timestamp/Makefile.am.relro Linux-PAM-1.1.8/modules/pam_timestamp/Makefile.am +--- Linux-PAM-1.1.8/modules/pam_timestamp/Makefile.am.relro 2013-06-18 16:11:21.000000000 +0200 ++++ Linux-PAM-1.1.8/modules/pam_timestamp/Makefile.am 2014-08-13 16:02:49.906688139 +0200 +@@ -36,7 +36,7 @@ pam_timestamp_la_CFLAGS = $(AM_CFLAGS) + pam_timestamp_check_SOURCES = pam_timestamp_check.c + pam_timestamp_check_CFLAGS = $(AM_CFLAGS) @PIE_CFLAGS@ + pam_timestamp_check_LDADD = $(top_builddir)/libpam/libpam.la +-pam_timestamp_check_LDFLAGS = @PIE_LDFLAGS@ ++pam_timestamp_check_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ + + hmacfile_SOURCES = hmacfile.c hmacsha1.c sha1.c + hmacfile_LDADD = $(top_builddir)/libpam/libpam.la +diff -up Linux-PAM-1.1.8/modules/pam_unix/Makefile.am.relro Linux-PAM-1.1.8/modules/pam_unix/Makefile.am +--- Linux-PAM-1.1.8/modules/pam_unix/Makefile.am.relro 2013-06-18 16:11:21.000000000 +0200 ++++ Linux-PAM-1.1.8/modules/pam_unix/Makefile.am 2014-08-13 16:02:49.906688139 +0200 +@@ -55,13 +55,13 @@ bigcrypt_LDADD = @LIBCRYPT@ + unix_chkpwd_SOURCES = unix_chkpwd.c md5_good.c md5_broken.c bigcrypt.c \ + passverify.c + unix_chkpwd_CFLAGS = $(AM_CFLAGS) @PIE_CFLAGS@ -DHELPER_COMPILE=\"unix_chkpwd\" +-unix_chkpwd_LDFLAGS = @PIE_LDFLAGS@ ++unix_chkpwd_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ + unix_chkpwd_LDADD = @LIBCRYPT@ @LIBSELINUX@ @LIBAUDIT@ + + unix_update_SOURCES = unix_update.c md5_good.c md5_broken.c bigcrypt.c \ + passverify.c + unix_update_CFLAGS = $(AM_CFLAGS) @PIE_CFLAGS@ -DHELPER_COMPILE=\"unix_update\" +-unix_update_LDFLAGS = @PIE_LDFLAGS@ ++unix_update_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ + unix_update_LDADD = @LIBCRYPT@ @LIBSELINUX@ + + if ENABLE_REGENERATE_MAN diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-pwhistory-helper.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-pwhistory-helper.patch new file mode 100644 index 00000000..554e5c8f --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-pwhistory-helper.patch @@ -0,0 +1,806 @@ +diff -up Linux-PAM-1.3.0/modules/pam_pwhistory/Makefile.am.pwhhelper Linux-PAM-1.3.0/modules/pam_pwhistory/Makefile.am +--- Linux-PAM-1.3.0/modules/pam_pwhistory/Makefile.am.pwhhelper 2016-03-24 12:45:42.000000000 +0100 ++++ Linux-PAM-1.3.0/modules/pam_pwhistory/Makefile.am 2016-05-06 15:18:42.307637933 +0200 +@@ -1,5 +1,6 @@ + # + # Copyright (c) 2008, 2009 Thorsten Kukuk <kukuk@suse.de> ++# Copyright (c) 2013 Red Hat, Inc. + # + + CLEANFILES = *~ +@@ -9,25 +10,34 @@ EXTRA_DIST = README $(MANS) $(XMLS) tst- + + TESTS = tst-pam_pwhistory + +-man_MANS = pam_pwhistory.8 ++man_MANS = pam_pwhistory.8 pwhistory_helper.8 + +-XMLS = README.xml pam_pwhistory.8.xml ++XMLS = README.xml pam_pwhistory.8.xml pwhistory_helper.8.xml + + securelibdir = $(SECUREDIR) + secureconfdir = $(SCONFIGDIR) + +-AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include +-AM_LDFLAGS = -no-undefined -avoid-version -module ++AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \ ++ -DPWHISTORY_HELPER=\"$(sbindir)/pwhistory_helper\" ++ ++pam_pwhistory_la_LDFLAGS = -no-undefined -avoid-version -module + if HAVE_VERSIONING +- AM_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map ++ pam_pwhistory_la_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map + endif + + noinst_HEADERS = opasswd.h + + securelib_LTLIBRARIES = pam_pwhistory.la +-pam_pwhistory_la_LIBADD = $(top_builddir)/libpam/libpam.la @LIBCRYPT@ ++pam_pwhistory_la_CFLAGS = $(AM_CFLAGS) ++pam_pwhistory_la_LIBADD = $(top_builddir)/libpam/libpam.la @LIBCRYPT@ @LIBSELINUX@ + pam_pwhistory_la_SOURCES = pam_pwhistory.c opasswd.c + ++sbin_PROGRAMS = pwhistory_helper ++pwhistory_helper_CFLAGS = $(AM_CFLAGS) -DHELPER_COMPILE=\"pwhistory_helper\" @PIE_CFLAGS@ ++pwhistory_helper_SOURCES = pwhistory_helper.c opasswd.c ++pwhistory_helper_LDFLAGS = -Wl,-z,now @PIE_LDFLAGS@ ++pwhistory_helper_LDADD = $(top_builddir)/libpam/libpam.la @LIBCRYPT@ ++ + if ENABLE_REGENERATE_MAN + noinst_DATA = README + README: pam_pwhistory.8.xml +diff -up Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.c.pwhhelper Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.c +--- Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.c.pwhhelper 2016-03-24 12:45:42.000000000 +0100 ++++ Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.c 2016-05-06 15:18:42.307637933 +0200 +@@ -1,5 +1,6 @@ + /* + * Copyright (c) 2008 Thorsten Kukuk <kukuk@suse.de> ++ * Copyright (c) 2013 Red Hat, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions +@@ -38,6 +39,7 @@ + #endif + + #include <pwd.h> ++#include <shadow.h> + #include <time.h> + #include <ctype.h> + #include <errno.h> +@@ -47,6 +49,7 @@ + #include <string.h> + #include <stdlib.h> + #include <syslog.h> ++#include <stdarg.h> + #include <sys/stat.h> + + #if defined (HAVE_XCRYPT_H) +@@ -55,7 +58,14 @@ + #include <crypt.h> + #endif + ++#ifdef HELPER_COMPILE ++#define pam_modutil_getpwnam(h,n) getpwnam(n) ++#define pam_modutil_getspnam(h,n) getspnam(n) ++#define pam_syslog(h,a,...) helper_log_err(a,__VA_ARGS__) ++#else ++#include <security/pam_modutil.h> + #include <security/pam_ext.h> ++#endif + #include <security/pam_modules.h> + + #include "opasswd.h" +@@ -76,6 +86,19 @@ typedef struct { + char *old_passwords; + } opwd; + ++#ifdef HELPER_COMPILE ++void ++helper_log_err(int err, const char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ openlog(HELPER_COMPILE, LOG_CONS | LOG_PID, LOG_AUTHPRIV); ++ vsyslog(err, format, args); ++ va_end(args); ++ closelog(); ++} ++#endif + + static int + parse_entry (char *line, opwd *data) +@@ -117,8 +140,8 @@ compare_password(const char *newpass, co + } + + /* Check, if the new password is already in the opasswd file. */ +-int +-check_old_pass (pam_handle_t *pamh, const char *user, ++PAMH_ARG_DECL(int ++check_old_pass, const char *user, + const char *newpass, int debug) + { + int retval = PAM_SUCCESS; +@@ -128,6 +151,11 @@ check_old_pass (pam_handle_t *pamh, cons + opwd entry; + int found = 0; + ++#ifndef HELPER_COMPILE ++ if (SELINUX_ENABLED) ++ return PAM_PWHISTORY_RUN_HELPER; ++#endif ++ + if ((oldpf = fopen (OLD_PASSWORDS_FILE, "r")) == NULL) + { + if (errno != ENOENT) +@@ -213,9 +241,9 @@ check_old_pass (pam_handle_t *pamh, cons + return retval; + } + +-int +-save_old_pass (pam_handle_t *pamh, const char *user, uid_t uid, +- const char *oldpass, int howmany, int debug UNUSED) ++PAMH_ARG_DECL(int ++save_old_pass, const char *user, ++ int howmany, int debug UNUSED) + { + char opasswd_tmp[] = TMP_PASSWORDS_FILE; + struct stat opasswd_stat; +@@ -226,10 +254,35 @@ save_old_pass (pam_handle_t *pamh, const + char *buf = NULL; + size_t buflen = 0; + int found = 0; ++ struct passwd *pwd; ++ const char *oldpass; ++ ++ pwd = pam_modutil_getpwnam (pamh, user); ++ if (pwd == NULL) ++ return PAM_USER_UNKNOWN; + + if (howmany <= 0) + return PAM_SUCCESS; + ++#ifndef HELPER_COMPILE ++ if (SELINUX_ENABLED) ++ return PAM_PWHISTORY_RUN_HELPER; ++#endif ++ ++ if ((strcmp(pwd->pw_passwd, "x") == 0) || ++ ((pwd->pw_passwd[0] == '#') && ++ (pwd->pw_passwd[1] == '#') && ++ (strcmp(pwd->pw_name, pwd->pw_passwd + 2) == 0))) ++ { ++ struct spwd *spw = pam_modutil_getspnam (pamh, user); ++ ++ if (spw == NULL) ++ return PAM_USER_UNKNOWN; ++ oldpass = spw->sp_pwdp; ++ } ++ else ++ oldpass = pwd->pw_passwd; ++ + if (oldpass == NULL || *oldpass == '\0') + return PAM_SUCCESS; + +@@ -452,7 +505,7 @@ save_old_pass (pam_handle_t *pamh, const + { + char *out; + +- if (asprintf (&out, "%s:%d:1:%s\n", user, uid, oldpass) < 0) ++ if (asprintf (&out, "%s:%d:1:%s\n", user, pwd->pw_uid, oldpass) < 0) + { + retval = PAM_AUTHTOK_ERR; + if (oldpf) +diff -up Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.h.pwhhelper Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.h +--- Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.h.pwhhelper 2016-03-24 12:45:42.000000000 +0100 ++++ Linux-PAM-1.3.0/modules/pam_pwhistory/opasswd.h 2016-05-06 15:18:42.307637933 +0200 +@@ -1,5 +1,6 @@ + /* + * Copyright (c) 2008 Thorsten Kukuk <kukuk@suse.de> ++ * Copyright (c) 2013 Red Hat, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions +@@ -36,10 +37,32 @@ + #ifndef __OPASSWD_H__ + #define __OPASSWD_H__ + +-extern int check_old_pass (pam_handle_t *pamh, const char *user, +- const char *newpass, int debug); +-extern int save_old_pass (pam_handle_t *pamh, const char *user, +- uid_t uid, const char *oldpass, +- int howmany, int debug); ++#define PAM_PWHISTORY_RUN_HELPER PAM_CRED_INSUFFICIENT ++ ++#ifdef WITH_SELINUX ++#include <selinux/selinux.h> ++#define SELINUX_ENABLED is_selinux_enabled()>0 ++#else ++#define SELINUX_ENABLED 0 ++#endif ++ ++#ifdef HELPER_COMPILE ++#define PAMH_ARG_DECL(fname, ...) fname(__VA_ARGS__) ++#define PAMH_ARG(...) __VA_ARGS__ ++#else ++#define PAMH_ARG_DECL(fname, ...) fname(pam_handle_t *pamh, __VA_ARGS__) ++#define PAMH_ARG(...) pamh, __VA_ARGS__ ++#endif ++ ++#ifdef HELPER_COMPILE ++void ++helper_log_err(int err, const char *format, ...); ++#endif ++ ++PAMH_ARG_DECL(int ++check_old_pass, const char *user, const char *newpass, int debug); ++ ++PAMH_ARG_DECL(int ++save_old_pass, const char *user, int howmany, int debug); + + #endif /* __OPASSWD_H__ */ +diff -up Linux-PAM-1.3.0/modules/pam_pwhistory/pam_pwhistory.c.pwhhelper Linux-PAM-1.3.0/modules/pam_pwhistory/pam_pwhistory.c +--- Linux-PAM-1.3.0/modules/pam_pwhistory/pam_pwhistory.c.pwhhelper 2016-04-04 11:22:28.000000000 +0200 ++++ Linux-PAM-1.3.0/modules/pam_pwhistory/pam_pwhistory.c 2016-05-06 15:19:31.610785512 +0200 +@@ -1,6 +1,7 @@ + /* + * Copyright (c) 2008, 2012 Thorsten Kukuk + * Author: Thorsten Kukuk <kukuk@thkukuk.de> ++ * Copyright (c) 2013 Red Hat, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions +@@ -46,10 +47,14 @@ + #include <stdlib.h> + #include <string.h> + #include <unistd.h> +-#include <shadow.h> + #include <syslog.h> + #include <sys/types.h> + #include <sys/stat.h> ++#include <sys/time.h> ++#include <sys/resource.h> ++#include <sys/wait.h> ++#include <signal.h> ++#include <fcntl.h> + + #include <security/pam_modules.h> + #include <security/pam_modutil.h> +@@ -59,6 +64,7 @@ + #include "opasswd.h" + + #define DEFAULT_BUFLEN 2048 ++#define MAX_FD_NO 20000 + + struct options_t { + int debug; +@@ -102,6 +108,184 @@ parse_option (pam_handle_t *pamh, const + pam_syslog (pamh, LOG_ERR, "pam_pwhistory: unknown option: %s", argv); + } + ++static int ++run_save_helper(pam_handle_t *pamh, const char *user, ++ int howmany, int debug) ++{ ++ int retval, child; ++ struct sigaction newsa, oldsa; ++ ++ memset(&newsa, '\0', sizeof(newsa)); ++ newsa.sa_handler = SIG_DFL; ++ sigaction(SIGCHLD, &newsa, &oldsa); ++ ++ child = fork(); ++ if (child == 0) ++ { ++ int i = 0; ++ struct rlimit rlim; ++ int dummyfds[2]; ++ static char *envp[] = { NULL }; ++ char *args[] = { NULL, NULL, NULL, NULL, NULL, NULL }; ++ ++ /* replace std file descriptors with a dummy pipe */ ++ if (pipe2(dummyfds, O_NONBLOCK) == 0) ++ { ++ dup2(dummyfds[0], STDIN_FILENO); ++ dup2(dummyfds[1], STDOUT_FILENO); ++ dup2(dummyfds[1], STDERR_FILENO); ++ } ++ ++ if (getrlimit(RLIMIT_NOFILE,&rlim) == 0) ++ { ++ if (rlim.rlim_max >= MAX_FD_NO) ++ rlim.rlim_max = MAX_FD_NO; ++ for (i = STDERR_FILENO + 1; i < (int)rlim.rlim_max; i++) ++ { ++ if (i != dummyfds[0]) ++ close(i); ++ } ++ } ++ ++ /* exec binary helper */ ++ args[0] = strdup(PWHISTORY_HELPER); ++ args[1] = strdup("save"); ++ args[2] = x_strdup(user); ++ asprintf(&args[3], "%d", howmany); ++ asprintf(&args[4], "%d", debug); ++ ++ execve(args[0], args, envp); ++ ++ _exit(PAM_SYSTEM_ERR); ++ } ++ else if (child > 0) ++ { ++ /* wait for child */ ++ int rc = 0; ++ rc = waitpid(child, &retval, 0); /* wait for helper to complete */ ++ if (rc < 0) ++ { ++ pam_syslog(pamh, LOG_ERR, "pwhistory_helper save waitpid returned %d: %m", rc); ++ retval = PAM_SYSTEM_ERR; ++ } ++ else if (!WIFEXITED(retval)) ++ { ++ pam_syslog(pamh, LOG_ERR, "pwhistory_helper save abnormal exit: %d", retval); ++ retval = PAM_SYSTEM_ERR; ++ } ++ else ++ { ++ retval = WEXITSTATUS(retval); ++ } ++ } ++ else ++ { ++ retval = PAM_SYSTEM_ERR; ++ } ++ ++ sigaction(SIGCHLD, &oldsa, NULL); /* restore old signal handler */ ++ ++ return retval; ++} ++ ++static int ++run_check_helper(pam_handle_t *pamh, const char *user, ++ const char *newpass, int debug) ++{ ++ int retval, child, fds[2]; ++ struct sigaction newsa, oldsa; ++ ++ /* create a pipe for the password */ ++ if (pipe(fds) != 0) ++ return PAM_SYSTEM_ERR; ++ ++ memset(&newsa, '\0', sizeof(newsa)); ++ newsa.sa_handler = SIG_DFL; ++ sigaction(SIGCHLD, &newsa, &oldsa); ++ ++ child = fork(); ++ if (child == 0) ++ { ++ int i = 0; ++ struct rlimit rlim; ++ int dummyfds[2]; ++ static char *envp[] = { NULL }; ++ char *args[] = { NULL, NULL, NULL, NULL, NULL }; ++ ++ /* reopen stdin as pipe */ ++ dup2(fds[0], STDIN_FILENO); ++ ++ /* replace std file descriptors with a dummy pipe */ ++ if (pipe2(dummyfds, O_NONBLOCK) == 0) ++ { ++ dup2(dummyfds[1], STDOUT_FILENO); ++ dup2(dummyfds[1], STDERR_FILENO); ++ } ++ ++ if (getrlimit(RLIMIT_NOFILE,&rlim) == 0) ++ { ++ if (rlim.rlim_max >= MAX_FD_NO) ++ rlim.rlim_max = MAX_FD_NO; ++ for (i = STDERR_FILENO + 1; i < (int)rlim.rlim_max; i++) ++ { ++ if (i != dummyfds[0]) ++ close(i); ++ } ++ } ++ ++ /* exec binary helper */ ++ args[0] = strdup(PWHISTORY_HELPER); ++ args[1] = strdup("check"); ++ args[2] = x_strdup(user); ++ asprintf(&args[3], "%d", debug); ++ ++ execve(args[0], args, envp); ++ ++ _exit(PAM_SYSTEM_ERR); ++ } ++ else if (child > 0) ++ { ++ /* wait for child */ ++ int rc = 0; ++ if (newpass == NULL) ++ newpass = ""; ++ ++ /* send the password to the child */ ++ if (write(fds[1], newpass, strlen(newpass)+1) == -1) ++ { ++ pam_syslog(pamh, LOG_ERR, "Cannot send password to helper: %m"); ++ retval = PAM_SYSTEM_ERR; ++ } ++ newpass = NULL; ++ close(fds[0]); /* close here to avoid possible SIGPIPE above */ ++ close(fds[1]); ++ rc = waitpid(child, &retval, 0); /* wait for helper to complete */ ++ if (rc < 0) ++ { ++ pam_syslog(pamh, LOG_ERR, "pwhistory_helper check waitpid returned %d: %m", rc); ++ retval = PAM_SYSTEM_ERR; ++ } ++ else if (!WIFEXITED(retval)) ++ { ++ pam_syslog(pamh, LOG_ERR, "pwhistory_helper check abnormal exit: %d", retval); ++ retval = PAM_SYSTEM_ERR; ++ } ++ else ++ { ++ retval = WEXITSTATUS(retval); ++ } ++ } ++ else ++ { ++ close(fds[0]); ++ close(fds[1]); ++ retval = PAM_SYSTEM_ERR; ++ } ++ ++ sigaction(SIGCHLD, &oldsa, NULL); /* restore old signal handler */ ++ ++ return retval; ++} + + /* This module saves the current crypted password in /etc/security/opasswd + and then compares the new password with all entries in this file. */ +@@ -109,7 +293,6 @@ parse_option (pam_handle_t *pamh, const + int + pam_sm_chauthtok (pam_handle_t *pamh, int flags, int argc, const char **argv) + { +- struct passwd *pwd; + const char *newpass; + const char *user; + int retval, tries; +@@ -154,31 +337,13 @@ pam_sm_chauthtok (pam_handle_t *pamh, in + return PAM_SUCCESS; + } + +- pwd = pam_modutil_getpwnam (pamh, user); +- if (pwd == NULL) +- return PAM_USER_UNKNOWN; +- +- if ((strcmp(pwd->pw_passwd, "x") == 0) || +- ((pwd->pw_passwd[0] == '#') && +- (pwd->pw_passwd[1] == '#') && +- (strcmp(pwd->pw_name, pwd->pw_passwd + 2) == 0))) +- { +- struct spwd *spw = pam_modutil_getspnam (pamh, user); +- if (spw == NULL) +- return PAM_USER_UNKNOWN; ++ retval = save_old_pass (pamh, user, options.remember, options.debug); + +- retval = save_old_pass (pamh, user, pwd->pw_uid, spw->sp_pwdp, +- options.remember, options.debug); +- if (retval != PAM_SUCCESS) +- return retval; +- } +- else +- { +- retval = save_old_pass (pamh, user, pwd->pw_uid, pwd->pw_passwd, +- options.remember, options.debug); +- if (retval != PAM_SUCCESS) +- return retval; +- } ++ if (retval == PAM_PWHISTORY_RUN_HELPER) ++ retval = run_save_helper(pamh, user, options.remember, options.debug); ++ ++ if (retval != PAM_SUCCESS) ++ return retval; + + newpass = NULL; + tries = 0; +@@ -207,8 +372,11 @@ pam_sm_chauthtok (pam_handle_t *pamh, in + if (options.debug) + pam_syslog (pamh, LOG_DEBUG, "check against old password file"); + +- if (check_old_pass (pamh, user, newpass, +- options.debug) != PAM_SUCCESS) ++ retval = check_old_pass (pamh, user, newpass, options.debug); ++ if (retval == PAM_PWHISTORY_RUN_HELPER) ++ retval = run_check_helper(pamh, user, newpass, options.debug); ++ ++ if (retval != PAM_SUCCESS) + { + if (getuid() || options.enforce_for_root || + (flags & PAM_CHANGE_EXPIRED_AUTHTOK)) +diff -up Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.c.pwhhelper Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.c +--- Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.c.pwhhelper 2016-05-06 15:18:42.308637957 +0200 ++++ Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.c 2016-05-06 15:18:42.308637957 +0200 +@@ -0,0 +1,209 @@ ++/* ++ * Copyright (c) 2013 Red Hat, Inc. ++ * Author: Tomas Mraz <tmraz@redhat.com> ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, and the entire permission notice in its entirety, ++ * including the disclaimer of warranties. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The name of the author may not be used to endorse or promote ++ * products derived from this software without specific prior ++ * written permission. ++ * ++ * ALTERNATIVELY, this product may be distributed under the terms of ++ * the GNU Public License, in which case the provisions of the GPL are ++ * required INSTEAD OF the above restrictions. (This clause is ++ * necessary due to a potential bad interaction between the GPL and ++ * the restrictions contained in a BSD-style copyright.) ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, ++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED ++ * OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include "config.h" ++ ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <syslog.h> ++#include <errno.h> ++#include <unistd.h> ++#include <signal.h> ++#include <security/_pam_types.h> ++#include <security/_pam_macros.h> ++#include "opasswd.h" ++ ++#define MAXPASS 200 ++ ++static void ++su_sighandler(int sig) ++{ ++#ifndef SA_RESETHAND ++ /* emulate the behaviour of the SA_RESETHAND flag */ ++ if ( sig == SIGILL || sig == SIGTRAP || sig == SIGBUS || sig = SIGSERV ) { ++ struct sigaction sa; ++ memset(&sa, '\0', sizeof(sa)); ++ sa.sa_handler = SIG_DFL; ++ sigaction(sig, &sa, NULL); ++ } ++#endif ++ if (sig > 0) { ++ _exit(sig); ++ } ++} ++ ++static void ++setup_signals(void) ++{ ++ struct sigaction action; /* posix signal structure */ ++ ++ /* ++ * Setup signal handlers ++ */ ++ (void) memset((void *) &action, 0, sizeof(action)); ++ action.sa_handler = su_sighandler; ++#ifdef SA_RESETHAND ++ action.sa_flags = SA_RESETHAND; ++#endif ++ (void) sigaction(SIGILL, &action, NULL); ++ (void) sigaction(SIGTRAP, &action, NULL); ++ (void) sigaction(SIGBUS, &action, NULL); ++ (void) sigaction(SIGSEGV, &action, NULL); ++ action.sa_handler = SIG_IGN; ++ action.sa_flags = 0; ++ (void) sigaction(SIGTERM, &action, NULL); ++ (void) sigaction(SIGHUP, &action, NULL); ++ (void) sigaction(SIGINT, &action, NULL); ++ (void) sigaction(SIGQUIT, &action, NULL); ++} ++ ++static int ++read_passwords(int fd, int npass, char **passwords) ++{ ++ int rbytes = 0; ++ int offset = 0; ++ int i = 0; ++ char *pptr; ++ while (npass > 0) ++ { ++ rbytes = read(fd, passwords[i]+offset, MAXPASS-offset); ++ ++ if (rbytes < 0) ++ { ++ if (errno == EINTR) continue; ++ break; ++ } ++ if (rbytes == 0) ++ break; ++ ++ while (npass > 0 && (pptr=memchr(passwords[i]+offset, '\0', rbytes)) ++ != NULL) ++ { ++ rbytes -= pptr - (passwords[i]+offset) + 1; ++ i++; ++ offset = 0; ++ npass--; ++ if (rbytes > 0) ++ { ++ if (npass > 0) ++ memcpy(passwords[i], pptr+1, rbytes); ++ memset(pptr+1, '\0', rbytes); ++ } ++ } ++ offset += rbytes; ++ } ++ ++ /* clear up */ ++ if (offset > 0 && npass > 0) ++ memset(passwords[i], '\0', offset); ++ ++ return i; ++} ++ ++ ++static int ++check_history(const char *user, const char *debug) ++{ ++ char pass[MAXPASS + 1]; ++ char *passwords[] = { pass }; ++ int npass; ++ int dbg = atoi(debug); /* no need to be too fancy here */ ++ int retval; ++ ++ /* read the password from stdin (a pipe from the pam_pwhistory module) */ ++ npass = read_passwords(STDIN_FILENO, 1, passwords); ++ ++ if (npass != 1) ++ { /* is it a valid password? */ ++ helper_log_err(LOG_DEBUG, "no password supplied"); ++ return PAM_AUTHTOK_ERR; ++ } ++ ++ retval = check_old_pass(user, pass, dbg); ++ ++ memset(pass, '\0', MAXPASS); /* clear memory of the password */ ++ ++ return retval; ++} ++ ++static int ++save_history(const char *user, const char *howmany, const char *debug) ++{ ++ int num = atoi(howmany); ++ int dbg = atoi(debug); /* no need to be too fancy here */ ++ int retval; ++ ++ retval = save_old_pass(user, num, dbg); ++ ++ return retval; ++} ++ ++int ++main(int argc, char *argv[]) ++{ ++ const char *option; ++ const char *user; ++ ++ /* ++ * Catch or ignore as many signal as possible. ++ */ ++ setup_signals(); ++ ++ /* ++ * we establish that this program is running with non-tty stdin. ++ * this is to discourage casual use. ++ */ ++ ++ if (isatty(STDIN_FILENO) || argc < 4) ++ { ++ fprintf(stderr, ++ "This binary is not designed for running in this way.\n"); ++ sleep(10); /* this should discourage/annoy the user */ ++ return PAM_SYSTEM_ERR; ++ } ++ ++ option = argv[1]; ++ user = argv[2]; ++ ++ if (strcmp(option, "check") == 0 && argc == 4) ++ return check_history(user, argv[3]); ++ else if (strcmp(option, "save") == 0 && argc == 5) ++ return save_history(user, argv[3], argv[4]); ++ ++ return PAM_SYSTEM_ERR; ++} ++ +diff -up Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.8.xml.pwhhelper Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.8.xml +--- Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.8.xml.pwhhelper 2016-05-06 15:18:42.308637957 +0200 ++++ Linux-PAM-1.3.0/modules/pam_pwhistory/pwhistory_helper.8.xml 2016-05-06 15:18:42.308637957 +0200 +@@ -0,0 +1,68 @@ ++<?xml version="1.0" encoding='UTF-8'?> ++<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" ++ "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"> ++ ++<refentry id="pwhistory_helper"> ++ ++ <refmeta> ++ <refentrytitle>pwhistory_helper</refentrytitle> ++ <manvolnum>8</manvolnum> ++ <refmiscinfo class="sectdesc">Linux-PAM Manual</refmiscinfo> ++ </refmeta> ++ ++ <refnamediv id="pwhistory_helper-name"> ++ <refname>pwhistory_helper</refname> ++ <refpurpose>Helper binary that transfers password hashes from passwd or shadow to opasswd</refpurpose> ++ </refnamediv> ++ ++ <refsynopsisdiv> ++ <cmdsynopsis id="pwhistory_helper-cmdsynopsis"> ++ <command>pwhistory_helper</command> ++ <arg choice="opt"> ++ ... ++ </arg> ++ </cmdsynopsis> ++ </refsynopsisdiv> ++ ++ <refsect1 id="pwhistory_helper-description"> ++ ++ <title>DESCRIPTION</title> ++ ++ <para> ++ <emphasis>pwhistory_helper</emphasis> is a helper program for the ++ <emphasis>pam_pwhistory</emphasis> module that transfers password hashes ++ from passwd or shadow file to the opasswd file and checks a password ++ supplied by user against the existing hashes in the opasswd file. ++ </para> ++ ++ <para> ++ The purpose of the helper is to enable tighter confinement of ++ login and password changing services. The helper is thus called only ++ when SELinux is enabled on the system. ++ </para> ++ ++ <para> ++ The interface of the helper - command line options, and input/output ++ data format are internal to the <emphasis>pam_pwhistory</emphasis> ++ module and it should not be called directly from applications. ++ </para> ++ </refsect1> ++ ++ <refsect1 id='pwhistory_helper-see_also'> ++ <title>SEE ALSO</title> ++ <para> ++ <citerefentry> ++ <refentrytitle>pam_pwhistory</refentrytitle><manvolnum>8</manvolnum> ++ </citerefentry> ++ </para> ++ </refsect1> ++ ++ <refsect1 id='pwhistory_helper-author'> ++ <title>AUTHOR</title> ++ <para> ++ Written by Tomas Mraz based on the code originally in ++ <emphasis>pam_pwhistory and pam_unix</emphasis> modules. ++ </para> ++ </refsect1> ++ ++</refentry> diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-unix-nomsg.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-unix-nomsg.patch new file mode 100644 index 00000000..33c22677 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.0-unix-nomsg.patch @@ -0,0 +1,16 @@ +diff -up Linux-PAM-1.3.0/modules/pam_unix/pam_unix_passwd.c.nomsg Linux-PAM-1.3.0/modules/pam_unix/pam_unix_passwd.c +--- Linux-PAM-1.3.0/modules/pam_unix/pam_unix_passwd.c.nomsg 2016-04-11 13:08:47.000000000 +0200 ++++ Linux-PAM-1.3.0/modules/pam_unix/pam_unix_passwd.c 2017-04-20 16:51:24.853106709 +0200 +@@ -687,12 +687,6 @@ pam_sm_chauthtok(pam_handle_t *pamh, int + return PAM_SUCCESS; + } else if (off(UNIX__IAMROOT, ctrl) || + (on(UNIX_NIS, ctrl) && _unix_comesfromsource(pamh, user, 0, 1))) { +- /* instruct user what is happening */ +- if (off(UNIX__QUIET, ctrl)) { +- retval = pam_info(pamh, _("Changing password for %s."), user); +- if (retval != PAM_SUCCESS) +- return retval; +- } + retval = pam_get_authtok(pamh, PAM_OLDAUTHTOK, &pass_old, NULL); + + if (retval != PAM_SUCCESS) { diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-coverity.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-coverity.patch new file mode 100644 index 00000000..cecf768f --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-coverity.patch @@ -0,0 +1,185 @@ +diff --git a/libpam/pam_handlers.c b/libpam/pam_handlers.c +index 106ef7c..b2e94c7 100644 +--- a/libpam/pam_handlers.c ++++ b/libpam/pam_handlers.c +@@ -282,7 +282,6 @@ _pam_open_config_file(pam_handle_t *pamh + { + char *p; + FILE *f; +- int err = 0; + + /* Absolute path */ + if (service[0] == '/') { +diff --git a/libpam_misc/misc_conv.c b/libpam_misc/misc_conv.c +index be53f34..07dce36 100644 +--- a/libpam_misc/misc_conv.c ++++ b/libpam_misc/misc_conv.c +@@ -211,7 +211,7 @@ static int read_string(int echo, const char *prompt, char **retstr) + line[nc] = '\0'; + } + *retstr = strdup(line); +- _pam_overwrite(line); ++ _pam_overwrite_n(line, sizeof(line)); + if (!*retstr) { + D(("no memory for response string")); + nc = -1; +@@ -244,7 +244,7 @@ static int read_string(int echo, const char *prompt, char **retstr) + D(("the timer appears to have expired")); + + *retstr = NULL; +- _pam_overwrite(line); ++ _pam_overwrite_n(line, sizeof(line)); + + cleanexit: + +diff --git a/modules/pam_access/pam_access.c b/modules/pam_access/pam_access.c +index 80d885d..3801862 100644 +--- a/modules/pam_access/pam_access.c ++++ b/modules/pam_access/pam_access.c +@@ -806,7 +806,7 @@ pam_sm_authenticate (pam_handle_t *pamh, int flags UNUSED, + const char *user=NULL; + const void *void_from=NULL; + const char *from; +- const char const *default_config = PAM_ACCESS_CONFIG; ++ const char * const default_config = PAM_ACCESS_CONFIG; + struct passwd *user_pw; + char hostname[MAXHOSTNAMELEN + 1]; + int rv; +diff --git a/modules/pam_limits/pam_limits.c b/modules/pam_limits/pam_limits.c +index 4bc4ae7..f8476b4 100644 +--- a/modules/pam_limits/pam_limits.c ++++ b/modules/pam_limits/pam_limits.c +@@ -342,7 +342,7 @@ static const char *lnames[RLIM_NLIMITS] = { + #endif + }; + +-static int str2rlimit(char *name) { ++static int str2rlimit(const char *name) { + int i; + if (!name || *name == '\0') + return -1; +@@ -352,7 +352,7 @@ static int str2rlimit(char *name) { + return -1; + } + +-static rlim_t str2rlim_t(char *value) { ++static rlim_t str2rlim_t(const char *value) { + unsigned long long rlimit = 0; + + if (!value) return (rlim_t)rlimit; +@@ -384,7 +384,7 @@ static void parse_kernel_limits(pam_handle_t *pamh, struct pam_limit_s *pl, int + FILE *limitsfile; + const char *proclimits = "/proc/1/limits"; + char line[256]; +- char *units, *hard, *soft, *name; ++ const char *units, *hard, *soft, *name; + + if (!(limitsfile = fopen(proclimits, "r"))) { + pam_syslog(pamh, LOG_WARNING, "Could not read %s (%s), using PAM defaults", proclimits, strerror(errno)); +diff --git a/modules/pam_loginuid/pam_loginuid.c b/modules/pam_loginuid/pam_loginuid.c +index 96bfd98..66d202c 100644 +--- a/modules/pam_loginuid/pam_loginuid.c ++++ b/modules/pam_loginuid/pam_loginuid.c +@@ -64,7 +64,7 @@ static int set_loginuid(pam_handle_t *pamh, uid_t uid) + fd = open("/proc/self/uid_map", O_RDONLY); + if (fd >= 0) { + count = pam_modutil_read(fd, uid_map, sizeof(uid_map)); +- if (strncmp(uid_map, host_uid_map, count) != 0) ++ if (count <= 0 || strncmp(uid_map, host_uid_map, count) != 0) + rc = PAM_IGNORE; + close(fd); + } +diff --git a/modules/pam_mkhomedir/mkhomedir_helper.c b/modules/pam_mkhomedir/mkhomedir_helper.c +index 9e204c1..4b8d6b7 100644 +--- a/modules/pam_mkhomedir/mkhomedir_helper.c ++++ b/modules/pam_mkhomedir/mkhomedir_helper.c +@@ -232,6 +232,8 @@ create_homedir(const struct passwd *pwd, + { + pam_syslog(NULL, LOG_DEBUG, + "unable to open or stat src file %s: %m", newsource); ++ if (srcfd >= 0) ++ close(srcfd); + closedir(d); + + #ifndef PATH_MAX +diff --git a/modules/pam_namespace/pam_namespace.c b/modules/pam_namespace/pam_namespace.c +index f541f89..85f5efa 100644 +--- a/modules/pam_namespace/pam_namespace.c ++++ b/modules/pam_namespace/pam_namespace.c +@@ -1418,6 +1418,7 @@ static int create_instance(struct polydir_s *polyptr, char *ipath, struct stat * + if (fstat(fd, &newstatbuf) < 0) { + pam_syslog(idata->pamh, LOG_ERR, "Error stating %s, %m", + ipath); ++ close(fd); + rmdir(ipath); + return PAM_SESSION_ERR; + } +diff --git a/modules/pam_pwhistory/opasswd.c b/modules/pam_pwhistory/opasswd.c +index e6cf346..813f579 100644 +--- a/modules/pam_pwhistory/opasswd.c ++++ b/modules/pam_pwhistory/opasswd.c +@@ -326,6 +326,9 @@ save_old_pass (pam_handle_t *pamh, const char *user, uid_t uid, + n = strlen (buf); + #endif /* HAVE_GETLINE / HAVE_GETDELIM */ + ++ if (n < 1) ++ break; ++ + cp = buf; + save = strdup (buf); /* Copy to write the original data back. */ + if (save == NULL) +@@ -336,9 +339,6 @@ save_old_pass (pam_handle_t *pamh, const char *user, uid_t uid, + goto error_opasswd; + } + +- if (n < 1) +- break; +- + tmp = strchr (cp, '#'); /* remove comments */ + if (tmp) + *tmp = '\0'; +diff --git a/modules/pam_rootok/pam_rootok.c b/modules/pam_rootok/pam_rootok.c +index 17baabe..a9d9140 100644 +--- a/modules/pam_rootok/pam_rootok.c ++++ b/modules/pam_rootok/pam_rootok.c +@@ -66,14 +66,17 @@ log_callback (int type, const char *fmt, ...) + int audit_fd; + va_list ap; + +- va_start(ap, fmt); + #ifdef HAVE_LIBAUDIT + audit_fd = audit_open(); + + if (audit_fd >= 0) { + char *buf; ++ int ret; + +- if (vasprintf (&buf, fmt, ap) < 0) ++ va_start(ap, fmt); ++ ret = vasprintf (&buf, fmt, ap); ++ va_end(ap); ++ if (ret < 0) + return 0; + audit_log_user_avc_message(audit_fd, AUDIT_USER_AVC, buf, NULL, NULL, + NULL, 0); +@@ -83,6 +86,7 @@ log_callback (int type, const char *fmt, ...) + } + + #endif ++ va_start(ap, fmt); + vsyslog (LOG_USER | LOG_INFO, fmt, ap); + va_end(ap); + return 0; +diff --git a/modules/pam_sepermit/pam_sepermit.c b/modules/pam_sepermit/pam_sepermit.c +index c653290..f37af0f 100644 +--- a/modules/pam_sepermit/pam_sepermit.c ++++ b/modules/pam_sepermit/pam_sepermit.c +@@ -353,7 +353,7 @@ sepermit_match(pam_handle_t *pamh, const char *cfgfile, const char *user, + if (*sense == PAM_SUCCESS) { + if (ignore) + *sense = PAM_IGNORE; +- if (geteuid() == 0 && exclusive && get_loginuid(pamh) == -1) ++ if (geteuid() == 0 && exclusive && get_loginuid(pamh) == (uid_t)-1) + if (sepermit_lock(pamh, user, debug) < 0) + *sense = PAM_AUTH_ERR; + } diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-motd-multiple-paths.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-motd-multiple-paths.patch new file mode 100644 index 00000000..a0b06981 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-motd-multiple-paths.patch @@ -0,0 +1,755 @@ +diff --git a/modules/pam_motd/pam_motd.8.xml b/modules/pam_motd/pam_motd.8.xml +index 906c4ed..4e2110c 100644 +--- a/modules/pam_motd/pam_motd.8.xml ++++ b/modules/pam_motd/pam_motd.8.xml +@@ -21,6 +21,9 @@ + <arg choice="opt"> + motd=<replaceable>/path/filename</replaceable> + </arg> ++ <arg choice="opt"> ++ motd_dir=<replaceable>/path/dirname.d</replaceable> ++ </arg> + </cmdsynopsis> + </refsynopsisdiv> + +@@ -31,10 +34,49 @@ + <para> + pam_motd is a PAM module that can be used to display + arbitrary motd (message of the day) files after a successful +- login. By default the <filename>/etc/motd</filename> file is +- shown. The message size is limited to 64KB. ++ login. By default, pam_motd shows files in the ++ following locations: ++ </para> ++ <para> ++ <simplelist type='vert'> ++ <member><filename>/etc/motd</filename></member> ++ <member><filename>/run/motd</filename></member> ++ <member><filename>/usr/lib/motd</filename></member> ++ <member><filename>/etc/motd.d/</filename></member> ++ <member><filename>/run/motd.d/</filename></member> ++ <member><filename>/usr/lib/motd.d/</filename></member> ++ </simplelist> ++ </para> ++ <para> ++ Each message size is limited to 64KB. ++ </para> ++ <para> ++ If <filename>/etc/motd</filename> does not exist, ++ then <filename>/run/motd</filename> is shown. If ++ <filename>/run/motd</filename> does not exist, then ++ <filename>/usr/lib/motd</filename> is shown. ++ </para> ++ <para> ++ Similar overriding behavior applies to the directories. ++ Files in <filename>/etc/motd.d/</filename> override files ++ with the same name in <filename>/run/motd.d/</filename> and ++ <filename>/usr/lib/motd.d/</filename>. Files in <filename>/run/motd.d/</filename> ++ override files with the same name in <filename>/usr/lib/motd.d/</filename>. ++ </para> ++ <para> ++ Files the in the directories listed above are displayed in ++ lexicographic order by name. ++ </para> ++ <para> ++ To silence a message, ++ a symbolic link with target <filename>/dev/null</filename> ++ may be placed in <filename>/etc/motd.d</filename> with ++ the same filename as the message to be silenced. Example: ++ Creating a symbolic link as follows silences <filename>/usr/lib/motd.d/my_motd</filename>. ++ </para> ++ <para> ++ <command>ln -s /dev/null /etc/motd.d/my_motd</command> + </para> +- + </refsect1> + + <refsect1 id="pam_motd-options"> +@@ -47,8 +89,10 @@ + </term> + <listitem> + <para> +- The <filename>/path/filename</filename> file is displayed +- as message of the day. ++ The <filename>/path/filename</filename> file is displayed ++ as message of the day. Multiple paths to try can be ++ specified as a colon-separated list. By default this option ++ is set to <filename>/etc/motd:/run/motd:/usr/lib/motd</filename>. + </para> + </listitem> + </varlistentry> +@@ -59,16 +103,17 @@ + <listitem> + <para> + The <filename>/path/dirname.d</filename> directory is scanned +- and each file contained inside of it is displayed. ++ and each file contained inside of it is displayed. Multiple ++ directories to scan can be specified as a colon-separated list. ++ By default this option is set to <filename>/etc/motd.d:/run/motd.d:/usr/lib/motd.d</filename>. + </para> + </listitem> + </varlistentry> + </variablelist> + <para> +- When no options are given, the default is to display both +- <filename>/etc/motd</filename> and the contents of +- <filename>/etc/motd.d</filename>. Specifying either option (or both) +- will disable this default behavior. ++ When no options are given, the default behavior applies for both ++ options. Specifying either option (or both) will disable the ++ default behavior for both options. + </para> + </refsect1> + +diff --git a/modules/pam_motd/pam_motd.c b/modules/pam_motd/pam_motd.c +index cc828d7..ec3ebd5 100644 +--- a/modules/pam_motd/pam_motd.c ++++ b/modules/pam_motd/pam_motd.c +@@ -33,8 +33,8 @@ + */ + + #define PAM_SM_SESSION +-#define DEFAULT_MOTD "/etc/motd" +-#define DEFAULT_MOTD_D "/etc/motd.d" ++#define DEFAULT_MOTD "/etc/motd:/run/motd:/usr/lib/motd" ++#define DEFAULT_MOTD_D "/etc/motd.d:/run/motd.d:/usr/lib/motd.d" + + #include <security/pam_modules.h> + #include <security/pam_modutil.h> +@@ -97,12 +97,234 @@ static void try_to_display_directory(pam_handle_t *pamh, const char *dirname) + } + } + ++/* ++ * Split a DELIM-separated string ARG into an array. ++ * Outputs a newly allocated array of strings OUT_ARG_SPLIT ++ * and the number of strings OUT_NUM_STRS. ++ * Returns 0 in case of error, 1 in case of success. ++ */ ++static int pam_split_string(const pam_handle_t *pamh, char *arg, char delim, ++ char ***out_arg_split, uint *out_num_strs) ++{ ++ char *arg_extracted = NULL; ++ const char *arg_ptr = arg; ++ char **arg_split = NULL; ++ char delim_str[2]; ++ int i = 0; ++ uint num_strs = 0; ++ int retval = 0; ++ ++ delim_str[0] = delim; ++ delim_str[1] = '\0'; ++ ++ if (arg == NULL) { ++ goto out; ++ } ++ ++ while (arg_ptr != NULL) { ++ num_strs++; ++ arg_ptr = strchr(arg_ptr + sizeof(const char), delim); ++ } ++ ++ arg_split = (char **)calloc(num_strs, sizeof(char *)); ++ if (arg_split == NULL) { ++ pam_syslog(pamh, LOG_CRIT, "pam_motd: failed to allocate string array"); ++ goto out; ++ } ++ ++ arg_extracted = strtok_r(arg, delim_str, &arg); ++ while (arg_extracted != NULL && i < num_strs) { ++ arg_split[i++] = arg_extracted; ++ arg_extracted = strtok_r(NULL, delim_str, &arg); ++ } ++ ++ retval = 1; ++ ++ out: ++ *out_num_strs = num_strs; ++ *out_arg_split = arg_split; ++ ++ return retval; ++} ++ ++/* Join A_STR and B_STR, inserting a "/" between them if one is not already trailing ++ * in A_STR or beginning B_STR. A pointer to a newly allocated string holding the ++ * joined string is returned in STRP_OUT. ++ * Returns -1 in case of error, or the number of bytes in the joined string in ++ * case of success. */ ++static int join_dir_strings(char **strp_out, const char *a_str, const char *b_str) ++{ ++ int has_sep = 0; ++ int retval = -1; ++ char *join_strp = NULL; ++ ++ if (strp_out == NULL || a_str == NULL || b_str == NULL) { ++ goto out; ++ } ++ if (strlen(a_str) == 0) { ++ goto out; ++ } ++ ++ has_sep = (a_str[strlen(a_str) - 1] == '/') || (b_str[0] == '/'); ++ ++ retval = asprintf(&join_strp, "%s%s%s", a_str, ++ (has_sep == 1) ? "" : "/", b_str); ++ ++ if (retval < 0) { ++ goto out; ++ } ++ ++ *strp_out = join_strp; ++ ++ out: ++ return retval; ++} ++ ++static int compare_strings(const void * a, const void * b) ++{ ++ const char *a_str = *(char **)a; ++ const char *b_str = *(char **)b; ++ ++ if (a_str == NULL && b_str == NULL) { ++ return 0; ++ } ++ else if (a_str == NULL) { ++ return -1; ++ } ++ else if (b_str == NULL) { ++ return 1; ++ } ++ else { ++ return strcmp(a_str, b_str); ++ } ++} ++ ++static int filter_dirents(const struct dirent *d) ++{ ++ return (d->d_type == DT_REG || d->d_type == DT_LNK); ++} ++ ++static void try_to_display_directories_with_overrides(pam_handle_t *pamh, ++ char **motd_dir_path_split, int num_motd_dirs) ++{ ++ struct dirent ***dirscans = NULL; ++ int *dirscans_sizes = NULL; ++ int dirscans_size_total = 0; ++ char **dirnames_all = NULL; ++ int i; ++ int i_dirnames = 0; ++ ++ if (pamh == NULL || motd_dir_path_split == NULL) { ++ goto out; ++ } ++ if (num_motd_dirs < 1) { ++ goto out; ++ } ++ ++ if ((dirscans = (struct dirent ***)calloc(num_motd_dirs, ++ sizeof(struct dirent **))) == NULL) { ++ pam_syslog(pamh, LOG_CRIT, "pam_motd: failed to allocate dirent arrays"); ++ goto out; ++ } ++ if ((dirscans_sizes = (int *)calloc(num_motd_dirs, sizeof(int))) == NULL) { ++ pam_syslog(pamh, LOG_CRIT, "pam_motd: failed to allocate dirent array sizes"); ++ goto out; ++ } ++ ++ for (i = 0; i < num_motd_dirs; i++) { ++ dirscans_sizes[i] = scandir(motd_dir_path_split[i], &(dirscans[i]), ++ filter_dirents, alphasort); ++ if (dirscans_sizes[i] < 0) { ++ pam_syslog(pamh, LOG_ERR, "pam_motd: error scanning directory %s", motd_dir_path_split[i]); ++ dirscans_sizes[i] = 0; ++ } ++ dirscans_size_total += dirscans_sizes[i]; ++ } ++ ++ /* Allocate space for all file names found in the directories, including duplicates. */ ++ if ((dirnames_all = (char **)calloc(dirscans_size_total, ++ sizeof(char *))) == NULL) { ++ pam_syslog(pamh, LOG_CRIT, "pam_motd: failed to allocate dirname array"); ++ goto out; ++ } ++ ++ for (i = 0; i < dirscans_size_total; i++) { ++ dirnames_all[i] = NULL; ++ } ++ ++ for (i = 0; i < num_motd_dirs; i++) { ++ int j; ++ ++ for (j = 0; j < dirscans_sizes[i]; j++) { ++ dirnames_all[i_dirnames] = dirscans[i][j]->d_name; ++ i_dirnames++; ++ } ++ } ++ ++ qsort(dirnames_all, dirscans_size_total, ++ sizeof(const char *), compare_strings); ++ ++ for (i = 0; i < dirscans_size_total; i++) { ++ int j; ++ ++ if (dirnames_all[i] == NULL) { ++ continue; ++ } ++ ++ /* Skip duplicate file names. */ ++ if (i > 0 && strcmp(dirnames_all[i], dirnames_all[i - 1]) == 0) { ++ continue; ++ } ++ ++ for (j = 0; j < num_motd_dirs; j++) { ++ char *abs_path = NULL; ++ ++ if (join_dir_strings(&abs_path, motd_dir_path_split[j], ++ dirnames_all[i]) < 0) { ++ continue; ++ } ++ ++ if (abs_path != NULL) { ++ int fd = open(abs_path, O_RDONLY, 0); ++ if (fd >= 0) { ++ try_to_display_fd(pamh, fd); ++ close(fd); ++ ++ /* We displayed a file, skip to the next file name. */ ++ break; ++ } ++ } ++ _pam_drop(abs_path); ++ } ++ } ++ ++ out: ++ _pam_drop(dirnames_all); ++ for (i = 0; i < num_motd_dirs; i++) { ++ int j; ++ for (j = 0; j < dirscans_sizes[i]; j++) { ++ _pam_drop(dirscans[i][j]); ++ } ++ _pam_drop(dirscans[i]); ++ } ++ _pam_drop(dirscans_sizes); ++ _pam_drop(dirscans); ++ ++ return; ++} ++ + int pam_sm_open_session(pam_handle_t *pamh, int flags, + int argc, const char **argv) + { + int retval = PAM_IGNORE; + const char *motd_path = NULL; ++ char *motd_path_copy = NULL; ++ int num_motd_paths = 0; ++ char **motd_path_split = NULL; + const char *motd_dir_path = NULL; ++ char *motd_dir_path_copy = NULL; ++ int num_motd_dir_paths = 0; ++ char **motd_dir_path_split = NULL; + + if (flags & PAM_SILENT) { + return retval; +@@ -141,16 +363,52 @@ int pam_sm_open_session(pam_handle_t *pamh, int flags, + } + + if (motd_path != NULL) { +- int fd = open(motd_path, O_RDONLY, 0); ++ motd_path_copy = strdup(motd_path); ++ } ++ ++ if (motd_path_copy != NULL) { ++ if (pam_split_string(pamh, motd_path_copy, ':', ++ &motd_path_split, &num_motd_paths) == 0) { ++ goto out; ++ } ++ } ++ ++ if (motd_dir_path != NULL) { ++ motd_dir_path_copy = strdup(motd_dir_path); ++ } + +- if (fd >= 0) { +- try_to_display_fd(pamh, fd); +- close(fd); ++ if (motd_dir_path_copy != NULL) { ++ if (pam_split_string(pamh, motd_dir_path_copy, ':', ++ &motd_dir_path_split, &num_motd_dir_paths) == 0) { ++ goto out; + } + } + +- if (motd_dir_path != NULL) +- try_to_display_directory(pamh, motd_dir_path); ++ if (motd_path_split != NULL) { ++ int i; ++ ++ for (i = 0; i < num_motd_paths; i++) { ++ int fd = open(motd_path_split[i], O_RDONLY, 0); ++ ++ if (fd >= 0) { ++ try_to_display_fd(pamh, fd); ++ close(fd); ++ ++ /* We found and displayed a file, move onto next filename. */ ++ break; ++ } ++ } ++ } ++ ++ if (motd_dir_path_split != NULL) ++ try_to_display_directories_with_overrides(pamh, motd_dir_path_split, ++ num_motd_dir_paths); ++ ++ out: ++ _pam_drop(motd_path_copy); ++ _pam_drop(motd_path_split); ++ _pam_drop(motd_dir_path_copy); ++ _pam_drop(motd_dir_path_split); + + return retval; + } +diff --git a/xtests/Makefile.am b/xtests/Makefile.am +index a6d6f8d..4d5aba3 100644 +--- a/xtests/Makefile.am ++++ b/xtests/Makefile.am +@@ -32,7 +32,10 @@ EXTRA_DIST = run-xtests.sh tst-pam_dispatch1.pamd tst-pam_dispatch2.pamd \ + tst-pam_substack5.pamd tst-pam_substack5a.pamd tst-pam_substack5.sh \ + tst-pam_assemble_line1.pamd tst-pam_assemble_line1.sh \ + tst-pam_pwhistory1.pamd tst-pam_pwhistory1.sh \ +- tst-pam_time1.pamd time.conf ++ tst-pam_time1.pamd time.conf \ ++ tst-pam_motd.sh tst-pam_motd1.sh tst-pam_motd2.sh \ ++ tst-pam_motd3.sh tst-pam_motd4.sh tst-pam_motd1.pamd \ ++ tst-pam_motd2.pamd tst-pam_motd3.pamd tst-pam_motd4.pamd + + XTESTS = tst-pam_dispatch1 tst-pam_dispatch2 tst-pam_dispatch3 \ + tst-pam_dispatch4 tst-pam_dispatch5 \ +@@ -41,7 +44,7 @@ XTESTS = tst-pam_dispatch1 tst-pam_dispatch2 tst-pam_dispatch3 \ + tst-pam_access1 tst-pam_access2 tst-pam_access3 \ + tst-pam_access4 tst-pam_limits1 tst-pam_succeed_if1 \ + tst-pam_group1 tst-pam_authfail tst-pam_authsucceed \ +- tst-pam_pwhistory1 tst-pam_time1 ++ tst-pam_pwhistory1 tst-pam_time1 tst-pam_motd + + NOSRCTESTS = tst-pam_substack1 tst-pam_substack2 tst-pam_substack3 \ + tst-pam_substack4 tst-pam_substack5 tst-pam_assemble_line1 +diff --git a/xtests/tst-pam_motd.c b/xtests/tst-pam_motd.c +new file mode 100644 +index 0000000..bba2f9d +--- /dev/null ++++ b/xtests/tst-pam_motd.c +@@ -0,0 +1,69 @@ ++/* ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, and the entire permission notice in its entirety, ++ * including the disclaimer of warranties. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The name of the author may not be used to endorse or promote ++ * products derived from this software without specific prior ++ * written permission. ++ * ++ * ALTERNATIVELY, this product may be distributed under the terms of ++ * the GNU Public License, in which case the provisions of the GPL are ++ * required INSTEAD OF the above restrictions. (This clause is ++ * necessary due to a potential bad interaction between the GPL and ++ * the restrictions contained in a BSD-style copyright.) ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, ++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED ++ * OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#ifdef HAVE_CONFIG_H ++#include <config.h> ++#endif ++ ++#include <stdio.h> ++#include <stdlib.h> ++#include <security/pam_appl.h> ++#include <security/pam_misc.h> ++ ++static struct pam_conv conv = { ++ misc_conv, ++ NULL ++}; ++ ++int main(int argc, char *argv[]) ++{ ++ pam_handle_t *pamh=NULL; ++ char *tst_arg = NULL; ++ int retval; ++ ++ if (argc > 1) ++ tst_arg = argv[1]; ++ ++ retval = pam_start(tst_arg, NULL, &conv, &pamh); ++ ++ retval = pam_open_session(pamh, 0); ++ ++ retval = pam_close_session(pamh, 0); ++ ++ if (pam_end(pamh,retval) != PAM_SUCCESS) { /* close Linux-PAM */ ++ pamh = NULL; ++ exit(1); ++ } ++ ++ return ( retval == PAM_SUCCESS ? 0:1 ); /* indicate success */ ++} +diff --git a/xtests/tst-pam_motd.sh b/xtests/tst-pam_motd.sh +new file mode 100755 +index 0000000..9080128 +--- /dev/null ++++ b/xtests/tst-pam_motd.sh +@@ -0,0 +1,8 @@ ++#!/bin/bash ++ ++set -e ++ ++./tst-pam_motd1.sh ++./tst-pam_motd2.sh ++./tst-pam_motd3.sh ++./tst-pam_motd4.sh +diff --git a/xtests/tst-pam_motd1.pamd b/xtests/tst-pam_motd1.pamd +new file mode 100644 +index 0000000..ddea82c +--- /dev/null ++++ b/xtests/tst-pam_motd1.pamd +@@ -0,0 +1,3 @@ ++#%PAM-1.0 ++session required pam_permit.so ++session optional pam_motd.so motd=tst-pam_motd1.d/etc/motd motd_dir=tst-pam_motd1.d/etc/motd.d +diff --git a/xtests/tst-pam_motd1.sh b/xtests/tst-pam_motd1.sh +new file mode 100755 +index 0000000..cc88854 +--- /dev/null ++++ b/xtests/tst-pam_motd1.sh +@@ -0,0 +1,36 @@ ++#!/bin/bash ++ ++TST_DIR="tst-pam_motd1.d" ++ ++function tst_cleanup() { ++ rm -rf "${TST_DIR}" ++ rm -f tst-pam_motd1.out ++} ++ ++mkdir -p ${TST_DIR} ++mkdir -p ${TST_DIR}/etc/motd.d ++ ++# Verify the case of single motd and motd.d directory works ++echo "motd: /etc/motd" > ${TST_DIR}/etc/motd ++echo "motd: /etc/motd.d/test" > ${TST_DIR}/etc/motd.d/test ++ ++./tst-pam_motd tst-pam_motd1 > tst-pam_motd1.out ++ ++RET=$? ++ ++motd_to_show_output=$(cat tst-pam_motd1.out | grep "motd: /etc/motd") ++if [ -z "${motd_to_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++motd_dir_to_show_output=$(cat tst-pam_motd1.out | grep "motd: /etc/motd.d/test") ++if [ -z "${motd_dir_to_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++tst_cleanup ++exit $RET +diff --git a/xtests/tst-pam_motd2.pamd b/xtests/tst-pam_motd2.pamd +new file mode 100644 +index 0000000..8200191 +--- /dev/null ++++ b/xtests/tst-pam_motd2.pamd +@@ -0,0 +1,3 @@ ++#%PAM-1.0 ++session required pam_permit.so ++session optional pam_motd.so motd=tst-pam_motd2.d/etc/motd:tst-pam_motd2.d/run/motd:tst-pam_motd2.d/usr/lib/motd motd_dir=tst-pam_motd2.d/etc/motd.d:tst-pam_motd2.d/run/motd.d:tst-pam_motd2.d/usr/lib/motd.d +diff --git a/xtests/tst-pam_motd2.sh b/xtests/tst-pam_motd2.sh +new file mode 100755 +index 0000000..d26ea92 +--- /dev/null ++++ b/xtests/tst-pam_motd2.sh +@@ -0,0 +1,53 @@ ++#!/bin/bash ++ ++TST_DIR="tst-pam_motd2.d" ++ ++function tst_cleanup() { ++ rm -rf "${TST_DIR}" ++ rm -f tst-pam_motd2.out ++} ++ ++mkdir -p ${TST_DIR} ++mkdir -p ${TST_DIR}/etc/motd.d ++mkdir -p ${TST_DIR}/run/motd.d ++mkdir -p ${TST_DIR}/usr/lib/motd.d ++ ++echo "motd: /etc/motd" > ${TST_DIR}/etc/motd ++echo "motd: /run/motd" > ${TST_DIR}/run/motd ++echo "motd: /usr/lib/motd" > ${TST_DIR}/usr/lib/motd ++ ++# Drop a motd file in test directories such that every overriding ++# condition (for 3 directories in this case) will be seen. ++echo "motd: e0r0u1 in usr/lib - will show" > ${TST_DIR}/usr/lib/motd.d/e0r0u1.motd ++echo "motd: e0r1u0 in run - will show" > ${TST_DIR}/run/motd.d/e0r1u0.motd ++echo "motd: e0r1u1 in usr/lib - not show" > ${TST_DIR}/usr/lib/motd.d/e0r1u1.motd ++echo "motd: e0r1u1 in run - will show" > ${TST_DIR}/run/motd.d/e0r1u1.motd ++echo "motd: e1r0u0 in etc - will show" > ${TST_DIR}/etc/motd.d/e1r0u0.motd ++echo "motd: e1r0u1 in usr/lib - not show" > ${TST_DIR}/usr/lib/motd.d/e1r0u1.motd ++echo "motd: e1r0u1 in etc - will show" > ${TST_DIR}/etc/motd.d/e1r0u1.motd ++echo "motd: e1r1u0 in run - not show" > ${TST_DIR}/run/motd.d/e1r1u0.motd ++echo "motd: e1r1u0 in etc - will show" > ${TST_DIR}/etc/motd.d/e1r1u0.motd ++echo "motd: e1r1u1 in usr/lib - not show" > ${TST_DIR}/usr/lib/motd.d/e1r1u1.motd ++echo "motd: e1r1u1 in run - not show" > ${TST_DIR}/run/motd.d/e1r1u1.motd ++echo "motd: e1r1u1 in etc - will show" > ${TST_DIR}/etc/motd.d/e1r1u1.motd ++ ++./tst-pam_motd tst-pam_motd2 > tst-pam_motd2.out ++ ++RET=$? ++ ++motd_to_show_output=$(cat tst-pam_motd2.out | grep "motd: /etc/motd") ++if [ -z "${motd_to_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++motd_dir_not_show_output=$(cat tst-pam_motd2.out | grep "not show") ++if [ -n "${motd_dir_not_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++tst_cleanup ++exit $RET +diff --git a/xtests/tst-pam_motd3.pamd b/xtests/tst-pam_motd3.pamd +new file mode 100644 +index 0000000..a8b8cbf +--- /dev/null ++++ b/xtests/tst-pam_motd3.pamd +@@ -0,0 +1,3 @@ ++#%PAM-1.0 ++session required pam_permit.so ++session optional pam_motd.so motd=tst-pam_motd3.d/etc/motd:tst-pam_motd3.d/run/motd:tst-pam_motd3.d/usr/lib/motd motd_dir=tst-pam_motd3.d/etc/motd.d:tst-pam_motd3.d/run/motd.d:tst-pam_motd3.d/usr/lib/motd.d +diff --git a/xtests/tst-pam_motd3.sh b/xtests/tst-pam_motd3.sh +new file mode 100755 +index 0000000..e18856b +--- /dev/null ++++ b/xtests/tst-pam_motd3.sh +@@ -0,0 +1,53 @@ ++#!/bin/bash ++ ++TST_DIR="tst-pam_motd3.d" ++ ++function tst_cleanup() { ++ rm -rf "${TST_DIR}" ++ rm -f tst-pam_motd3.out ++} ++ ++mkdir -p ${TST_DIR} ++mkdir -p ${TST_DIR}/etc/motd.d ++mkdir -p ${TST_DIR}/run/motd.d ++mkdir -p ${TST_DIR}/usr/lib/motd.d ++ ++# Verify motd is still displayed when not overridden ++echo "motd: test-show in run - show" > ${TST_DIR}/run/motd.d/test-show.motd ++ ++# Test overridden by a symlink to a file that isn't /dev/null; symlink target should show ++echo "motd: hidden-by-symlink in usr/lib - not show" > ${TST_DIR}/usr/lib/motd.d/hidden-by-symlink.motd ++echo "motd: test-from-symlink - show" > ${TST_DIR}/test-from-symlink.motd ++ln -sr ${TST_DIR}/test-from-symlink.motd ${TST_DIR}/run/motd.d/hidden-by-symlink.motd ++ ++# Test hidden by a null symlink ++echo "motd: hidden-by-null-symlink in run - not show" > ${TST_DIR}/run/motd.d/hidden-by-null-symlink.motd ++ln -s /dev/null ${TST_DIR}/etc/motd.d/hidden-by-null-symlink.motd ++ ++./tst-pam_motd tst-pam_motd3 > tst-pam_motd3.out ++ ++RET=$? ++ ++motd_dir_not_show_output=$(cat tst-pam_motd3.out | grep "not show") ++if [ -n "${motd_dir_not_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++motd_test_show_output=$(cat tst-pam_motd3.out | grep "test-show.*- show") ++if [ -z "${motd_test_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++motd_general_symlink_show_output=$(cat tst-pam_motd3.out | grep "test-from-symlink.*- show") ++if [ -z "${motd_general_symlink_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++tst_cleanup ++exit $RET +diff --git a/xtests/tst-pam_motd4.pamd b/xtests/tst-pam_motd4.pamd +new file mode 100644 +index 0000000..9dc311a +--- /dev/null ++++ b/xtests/tst-pam_motd4.pamd +@@ -0,0 +1,3 @@ ++#%PAM-1.0 ++session required pam_permit.so ++session optional pam_motd.so motd=tst-pam_motd4.d/etc/motd +diff --git a/xtests/tst-pam_motd4.sh b/xtests/tst-pam_motd4.sh +new file mode 100755 +index 0000000..6022177 +--- /dev/null ++++ b/xtests/tst-pam_motd4.sh +@@ -0,0 +1,27 @@ ++#!/bin/bash ++ ++TST_DIR="tst-pam_motd4.d" ++ ++function tst_cleanup() { ++ rm -rf "${TST_DIR}" ++ rm -f tst-pam_motd4.out ++} ++ ++mkdir -p ${TST_DIR}/etc ++ ++# Verify the case of single motd with no motd_dir given in tst-pam_motd4.pamd ++echo "motd: /etc/motd" > ${TST_DIR}/etc/motd ++ ++./tst-pam_motd tst-pam_motd4 > tst-pam_motd4.out ++ ++RET=$? ++ ++motd_to_show_output=$(cat tst-pam_motd4.out | grep "motd: /etc/motd") ++if [ -z "${motd_to_show_output}" ]; ++then ++ tst_cleanup ++ exit 1 ++fi ++ ++tst_cleanup ++exit $RET diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-noflex.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-noflex.patch new file mode 100644 index 00000000..c65d2253 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-noflex.patch @@ -0,0 +1,24 @@ +diff -up Linux-PAM-1.3.1/doc/Makefile.am.noflex Linux-PAM-1.3.1/doc/Makefile.am +--- Linux-PAM-1.3.1/doc/Makefile.am.noflex 2017-02-10 11:10:15.000000000 +0100 ++++ Linux-PAM-1.3.1/doc/Makefile.am 2018-05-18 14:53:50.300997606 +0200 +@@ -2,7 +2,7 @@ + # Copyright (c) 2005, 2006 Thorsten Kukuk <kukuk@suse.de> + # + +-SUBDIRS = man specs sag adg mwg ++SUBDIRS = man sag adg mwg + + CLEANFILES = *~ + +diff -up Linux-PAM-1.3.1/Makefile.am.noflex Linux-PAM-1.3.1/Makefile.am +--- Linux-PAM-1.3.1/Makefile.am.noflex 2018-05-18 14:53:50.301997629 +0200 ++++ Linux-PAM-1.3.1/Makefile.am 2018-05-18 14:55:31.576353800 +0200 +@@ -4,7 +4,7 @@ + + AUTOMAKE_OPTIONS = 1.9 gnu dist-bzip2 dist-xz check-news + +-SUBDIRS = libpam tests libpamc libpam_misc modules po conf doc examples xtests ++SUBDIRS = libpam tests libpamc libpam_misc modules po doc examples xtests + + CLEANFILES = *~ + diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-redhat-modules.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-redhat-modules.patch new file mode 100644 index 00000000..4d3f3741 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-redhat-modules.patch @@ -0,0 +1,78 @@ +diff -up Linux-PAM-1.3.1/configure.ac.redhat-modules Linux-PAM-1.3.1/configure.ac +--- Linux-PAM-1.3.1/configure.ac.redhat-modules 2018-05-18 12:57:57.000000000 +0200 ++++ Linux-PAM-1.3.1/configure.ac 2018-11-26 12:58:14.623545121 +0100 +@@ -611,10 +611,12 @@ AC_CONFIG_FILES([Makefile libpam/Makefil + libpam_misc/Makefile conf/Makefile conf/pam_conv1/Makefile \ + po/Makefile.in \ + modules/Makefile \ ++ modules/pam_chroot/Makefile modules/pam_console/Makefile \ ++ modules/pam_postgresok/Makefile \ + modules/pam_access/Makefile modules/pam_cracklib/Makefile \ + modules/pam_debug/Makefile modules/pam_deny/Makefile \ + modules/pam_echo/Makefile modules/pam_env/Makefile \ +- modules/pam_faildelay/Makefile \ ++ modules/pam_faildelay/Makefile modules/pam_faillock/Makefile \ + modules/pam_filter/Makefile modules/pam_filter/upperLOWER/Makefile \ + modules/pam_ftp/Makefile modules/pam_group/Makefile \ + modules/pam_issue/Makefile modules/pam_keyinit/Makefile \ +diff -up Linux-PAM-1.3.1/doc/sag/pam_faillock.xml.redhat-modules Linux-PAM-1.3.1/doc/sag/pam_faillock.xml +--- Linux-PAM-1.3.1/doc/sag/pam_faillock.xml.redhat-modules 2018-11-26 12:58:14.623545121 +0100 ++++ Linux-PAM-1.3.1/doc/sag/pam_faillock.xml 2018-11-26 12:58:14.623545121 +0100 +@@ -0,0 +1,38 @@ ++<?xml version='1.0' encoding='UTF-8'?> ++<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" ++ "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd"> ++<section id='sag-pam_faillock'> ++ <title>pam_faillock - temporarily locking access based on failed authentication attempts during an interval</title> ++ <cmdsynopsis> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//cmdsynopsis[@id = "pam_faillock-cmdsynopsisauth"]/*)'/> ++ </cmdsynopsis> ++ <cmdsynopsis> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//cmdsynopsis[@id = "pam_faillock-cmdsynopsisacct"]/*)'/> ++ </cmdsynopsis> ++ <section id='sag-pam_faillock-description'> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//refsect1[@id = "pam_faillock-description"]/*)'/> ++ </section> ++ <section id='sag-pam_faillock-options'> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//refsect1[@id = "pam_faillock-options"]/*)'/> ++ </section> ++ <section id='sag-pam_faillock-types'> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//refsect1[@id = "pam_faillock-types"]/*)'/> ++ </section> ++ <section id='sag-pam_faillock-return_values'> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//refsect1[@id = "pam_faillock-return_values"]/*)'/> ++ </section> ++ <section id='sag-pam_faillock-examples'> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//refsect1[@id = "pam_faillock-examples"]/*)'/> ++ </section> ++ <section id='sag-pam_faillock-author'> ++ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" ++ href="../../modules/pam_faillock/pam_faillock.8.xml" xpointer='xpointer(//refsect1[@id = "pam_faillock-author"]/*)'/> ++ </section> ++</section> +diff -up Linux-PAM-1.3.1/modules/Makefile.am.redhat-modules Linux-PAM-1.3.1/modules/Makefile.am +--- Linux-PAM-1.3.1/modules/Makefile.am.redhat-modules 2017-02-10 11:10:15.000000000 +0100 ++++ Linux-PAM-1.3.1/modules/Makefile.am 2018-11-26 12:58:14.623545121 +0100 +@@ -3,13 +3,14 @@ + # + + SUBDIRS = pam_access pam_cracklib pam_debug pam_deny pam_echo \ ++ pam_chroot pam_console pam_postgresok pam_faillock \ + pam_env pam_exec pam_faildelay pam_filter pam_ftp \ + pam_group pam_issue pam_keyinit pam_lastlog pam_limits \ + pam_listfile pam_localuser pam_loginuid pam_mail \ + pam_mkhomedir pam_motd pam_namespace pam_nologin \ + pam_permit pam_pwhistory pam_rhosts pam_rootok pam_securetty \ + pam_selinux pam_sepermit pam_shells pam_stress \ +- pam_succeed_if pam_tally pam_tally2 pam_time pam_timestamp \ ++ pam_succeed_if pam_time pam_timestamp \ + pam_tty_audit pam_umask \ + pam_unix pam_userdb pam_warn pam_wheel pam_xauth + diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-bcrypt_b.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-bcrypt_b.patch new file mode 100644 index 00000000..bff9d47e --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-bcrypt_b.patch @@ -0,0 +1,34 @@ +From f7abb8c1ef3aa31e6c2564a8aaf69683a77c2016 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Bj=C3=B6rn=20Esser?= <besser82@fedoraproject.org> +Date: Thu, 15 Nov 2018 15:01:57 +0100 +Subject: [PATCH] pam_unix: Use bcrypt b-variant for computing new hashes. + +Bcrypt hashes used the "$2a$" prefix since 1997. +However, in 2011 an implementation bug was discovered in bcrypt +affecting the handling of characters in passphrases with the 8th +bit set. + +Besides fixing the bug, OpenBSD 5.5 introduced the "$2b$" prefix +for a behavior that exactly matches crypt_blowfish's "$2y$", and +the crypt_blowfish implementation supports it as well since v1.1. + +That said new computed bcrypt hashes should use the "$2b$" prefix. + +* modules/pam_unix/passverify.c: Use bcrypt b-variant. +--- + modules/pam_unix/passverify.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/modules/pam_unix/passverify.c b/modules/pam_unix/passverify.c +index 9c1771e2..1f433b3a 100644 +--- a/modules/pam_unix/passverify.c ++++ b/modules/pam_unix/passverify.c +@@ -385,7 +385,7 @@ PAMH_ARG_DECL(char * create_password_hash, + /* algoid = "$1" */ + return crypt_md5_wrapper(password); + } else if (on(UNIX_BLOWFISH_PASS, ctrl)) { +- algoid = "$2a$"; ++ algoid = "$2b$"; + } else if (on(UNIX_SHA256_PASS, ctrl)) { + algoid = "$5$"; + } else if (on(UNIX_SHA512_PASS, ctrl)) { diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-checksalt_syslog.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-checksalt_syslog.patch new file mode 100644 index 00000000..5cbc35b0 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-checksalt_syslog.patch @@ -0,0 +1,73 @@ +From 86eed7ca01864b9fd17099e57f10f2b9b6b568a1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Bj=C3=B6rn=20Esser?= <besser82@fedoraproject.org> +Date: Mon, 26 Nov 2018 22:33:17 +0100 +Subject: [PATCH] pam_unix: Report unusable hashes found by checksalt to + syslog. + +libxcrypt can be build-time configured to support (or not support) +various hashing methods. Future versions will also have support for +runtime configuration by the system's vendor and/or administrator. + +For that reason adminstrator should be notified by pam if users cannot +log into their account anymore because of such a change in the system's +configuration of libxcrypt. + +Also check for malformed hashes, like descrypt hashes starting with +"$2...", which might have been generated by unsafe base64 encoding +functions as used in glibc <= 2.16. +Such hashes are likely to be rejected by many recent implementations +of libcrypt. + +* modules/pam_unix/passverify.c (verify_pwd_hash): Report unusable +hashes found by checksalt to syslog. +--- + modules/pam_unix/passverify.c | 36 +++++++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +diff --git a/modules/pam_unix/passverify.c b/modules/pam_unix/passverify.c +index eb2444bb..2c808eb5 100644 +--- a/modules/pam_unix/passverify.c ++++ b/modules/pam_unix/passverify.c +@@ -103,6 +103,42 @@ verify_pwd_hash(const char *p, char *hash, unsigned int nullok) + * Ok, we don't know the crypt algorithm, but maybe + * libcrypt knows about it? We should try it. + */ ++#if defined(CRYPT_CHECKSALT_AVAILABLE) && CRYPT_CHECKSALT_AVAILABLE ++ /* Get the status of the hash from checksalt */ ++ int retval_checksalt = crypt_checksalt(hash); ++ ++ /* ++ * Check for hashing methods that are disabled by ++ * libcrypt configuration and/or system preset. ++ */ ++ if (retval_checksalt == CRYPT_SALT_METHOD_DISABLED) { ++ /* ++ * pam_syslog() needs a pam handle, ++ * but that's not available here. ++ */ ++ helper_log_err(LOG_ERR, ++ "pam_unix(verify_pwd_hash): The method " ++ "for computing the hash \"%.6s\" has been " ++ "disabled in libcrypt by the preset from " ++ "the system's vendor and/or administrator.", ++ hash); ++ } ++ /* ++ * Check for malformed hashes, like descrypt hashes ++ * starting with "$2...", which might have been ++ * generated by unsafe base64 encoding functions ++ * as used in glibc <= 2.16. ++ * Such hashes are likely to be rejected by many ++ * recent implementations of libcrypt. ++ */ ++ if (retval_checksalt == CRYPT_SALT_INVALID) { ++ helper_log_err(LOG_ERR, ++ "pam_unix(verify_pwd_hash): The hash \"%.6s\"" ++ "does not use a method known by the version " ++ "of libcrypt this system is supplied with.", ++ hash); ++ } ++#endif + #ifdef HAVE_CRYPT_R + struct crypt_data *cdata; + cdata = malloc(sizeof(*cdata)); diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-crypt_checksalt.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-crypt_checksalt.patch new file mode 100644 index 00000000..0a74e940 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-crypt_checksalt.patch @@ -0,0 +1,40 @@ +From 62425bf2a0c72d0e23139d0b285547a7add26251 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Bj=C3=B6rn=20Esser?= <besser82@fedoraproject.org> +Date: Thu, 15 Nov 2018 19:49:44 +0100 +Subject: [PATCH] pam_unix: Add support for crypt_checksalt, if libcrypt + supports it. + +libxcrypt v4.3 has added the crypt_checksalt function to whether +the prefix at the begining of a given hash string refers to a +supported hashing method. + +Future revisions of this function will add support to check whether +the hashing method, the prefix refers to, was disabled or considered +deprecated by the system's factory presets or system administrator. +Furthermore it will be able to detect whether the parameters, which +are used by the corresponding hashing method, being encoded in the +hash string are not considered to be strong enough anymore. + +*modules/pam_unix/passverify.c: Add support for crypt_checksalt. +--- + modules/pam_unix/passverify.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +diff --git a/modules/pam_unix/passverify.c b/modules/pam_unix/passverify.c +index 1f433b3a..6132130a 100644 +--- a/modules/pam_unix/passverify.c ++++ b/modules/pam_unix/passverify.c +@@ -244,7 +244,13 @@ PAMH_ARG_DECL(int check_shadow_expiry, + D(("account expired")); + return PAM_ACCT_EXPIRED; + } ++#if defined(CRYPT_CHECKSALT_AVAILABLE) && CRYPT_CHECKSALT_AVAILABLE ++ if (spent->sp_lstchg == 0 || ++ crypt_checksalt(spent->sp_pwdp) == CRYPT_SALT_METHOD_LEGACY || ++ crypt_checksalt(spent->sp_pwdp) == CRYPT_SALT_TOO_CHEAP) { ++#else + if (spent->sp_lstchg == 0) { ++#endif + D(("need a new password")); + *daysleft = 0; + return PAM_NEW_AUTHTOK_REQD; diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-fix_checksalt_syslog.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-fix_checksalt_syslog.patch new file mode 100644 index 00000000..41733ae0 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-fix_checksalt_syslog.patch @@ -0,0 +1,104 @@ +From d8d11db2cef65da5d2afa7acf21aa9c8cd88abed Mon Sep 17 00:00:00 2001 +From: Tomas Mraz <tmraz@fedoraproject.org> +Date: Tue, 27 Nov 2018 16:11:03 +0100 +Subject: [PATCH] pam_unix: Use pam_syslog instead of helper_log_err. + +* modules/pam_unix/passverify.c (verify_pwd_hash): Add pamh argument via + PAMH_ARG_DECL. Call pam_syslog() instead of helper_log_err(). +* modules/pam_unix/passverify.h: Adjust the declaration of verify_pwd_hash(). +* modules/pam_unix/support.c (_unix_verify_password): Add the pamh argument + to verify_pwd_hash() call. +--- + modules/pam_unix/passverify.c | 24 +++++++++++++----------- + modules/pam_unix/passverify.h | 6 +++--- + modules/pam_unix/support.c | 2 +- + 3 files changed, 17 insertions(+), 15 deletions(-) + +diff --git a/modules/pam_unix/passverify.c b/modules/pam_unix/passverify.c +index 2c808eb5..80e32767 100644 +--- a/modules/pam_unix/passverify.c ++++ b/modules/pam_unix/passverify.c +@@ -65,8 +65,8 @@ strip_hpux_aging(char *hash) + } + } + +-int +-verify_pwd_hash(const char *p, char *hash, unsigned int nullok) ++PAMH_ARG_DECL(int verify_pwd_hash, ++ const char *p, char *hash, unsigned int nullok) + { + size_t hash_len; + char *pp = NULL; +@@ -116,11 +116,10 @@ verify_pwd_hash(const char *p, char *hash, unsigned int nullok) + * pam_syslog() needs a pam handle, + * but that's not available here. + */ +- helper_log_err(LOG_ERR, +- "pam_unix(verify_pwd_hash): The method " +- "for computing the hash \"%.6s\" has been " +- "disabled in libcrypt by the preset from " +- "the system's vendor and/or administrator.", ++ pam_syslog(pamh, LOG_ERR, ++ "The support for password hash \"%.6s\" " ++ "has been disabled in libcrypt " ++ "configuration.", + hash); + } + /* +@@ -132,12 +131,15 @@ verify_pwd_hash(const char *p, char *hash, unsigned int nullok) + * recent implementations of libcrypt. + */ + if (retval_checksalt == CRYPT_SALT_INVALID) { +- helper_log_err(LOG_ERR, +- "pam_unix(verify_pwd_hash): The hash \"%.6s\"" +- "does not use a method known by the version " +- "of libcrypt this system is supplied with.", ++ pam_syslog(pamh, LOG_ERR, ++ "The password hash \"%.6s\" is unknown to " ++ "libcrypt.", + hash); + } ++#else ++#ifndef HELPER_COMPILE ++ (void)pamh; ++#endif + #endif + #ifdef HAVE_CRYPT_R + struct crypt_data *cdata; +diff --git a/modules/pam_unix/passverify.h b/modules/pam_unix/passverify.h +index 086c28ac..e9a88fbf 100644 +--- a/modules/pam_unix/passverify.h ++++ b/modules/pam_unix/passverify.h +@@ -12,9 +12,6 @@ + + #define OLD_PASSWORDS_FILE "/etc/security/opasswd" + +-int +-verify_pwd_hash(const char *p, char *hash, unsigned int nullok); +- + int + is_pwd_shadowed(const struct passwd *pwd); + +@@ -65,6 +62,9 @@ read_passwords(int fd, int npass, char **passwords); + #define PAMH_ARG(...) pamh, __VA_ARGS__ + #endif + ++PAMH_ARG_DECL(int verify_pwd_hash, ++ const char *p, char *hash, unsigned int nullok); ++ + PAMH_ARG_DECL(char * create_password_hash, + const char *password, unsigned long long ctrl, int rounds); + +diff --git a/modules/pam_unix/support.c b/modules/pam_unix/support.c +index 6894288d..ea5594d2 100644 +--- a/modules/pam_unix/support.c ++++ b/modules/pam_unix/support.c +@@ -770,7 +770,7 @@ int _unix_verify_password(pam_handle_t * pamh, const char *name + } + } + } else { +- retval = verify_pwd_hash(p, salt, off(UNIX__NONULL, ctrl)); ++ retval = verify_pwd_hash(pamh, p, salt, off(UNIX__NONULL, ctrl)); + } + + if (retval == PAM_SUCCESS) { diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-gensalt-autoentropy.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-gensalt-autoentropy.patch new file mode 100644 index 00000000..8ae4abfd --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-gensalt-autoentropy.patch @@ -0,0 +1,95 @@ +From 05aa693b7db6b818d31e41f0cab1d5fb4f49600e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Bj=C3=B6rn=20Esser?= <besser82@fedoraproject.org> +Date: Thu, 15 Nov 2018 15:58:56 +0100 +Subject: [PATCH] pam_unix: Prefer a gensalt function, that supports auto + entropy. + +* modules/pam_unix/pam_unix_passwd.c: Initialize rounds parameter to 0. +* modules/pam_unix/passverify.c: Prefer gensalt with auto entropy. +* modules/pam_unix/support.c: Fix sanitizing of rounds parameter. +--- + modules/pam_unix/pam_unix_passwd.c | 2 +- + modules/pam_unix/passverify.c | 13 +++++++++++++ + modules/pam_unix/support.c | 7 +++++-- + 3 files changed, 19 insertions(+), 3 deletions(-) + +Index: Linux-PAM-1.3.1/modules/pam_unix/pam_unix_passwd.c +=================================================================== +--- Linux-PAM-1.3.1.orig/modules/pam_unix/pam_unix_passwd.c ++++ Linux-PAM-1.3.1/modules/pam_unix/pam_unix_passwd.c +@@ -607,7 +607,7 @@ pam_sm_chauthtok(pam_handle_t *pamh, int + unsigned int ctrl, lctrl; + int retval; + int remember = -1; +- int rounds = -1; ++ int rounds = 0; + int pass_min_len = 0; + + /* <DO NOT free() THESE> */ +Index: Linux-PAM-1.3.1/modules/pam_unix/passverify.c +=================================================================== +--- Linux-PAM-1.3.1.orig/modules/pam_unix/passverify.c ++++ Linux-PAM-1.3.1/modules/pam_unix/passverify.c +@@ -375,7 +375,12 @@ PAMH_ARG_DECL(char * create_password_has + const char *password, unsigned int ctrl, int rounds) + { + const char *algoid; ++#if defined(CRYPT_GENSALT_OUTPUT_SIZE) && CRYPT_GENSALT_OUTPUT_SIZE > 64 ++ /* Strings returned by crypt_gensalt_rn will be no longer than this. */ ++ char salt[CRYPT_GENSALT_OUTPUT_SIZE]; ++#else + char salt[64]; /* contains rounds number + max 16 bytes of salt + algo id */ ++#endif + char *sp; + #ifdef HAVE_CRYPT_R + struct crypt_data *cdata = NULL; +@@ -406,6 +411,13 @@ PAMH_ARG_DECL(char * create_password_has + return crypted; + } + ++#if defined(CRYPT_GENSALT_IMPLEMENTS_AUTO_ENTROPY) && CRYPT_GENSALT_IMPLEMENTS_AUTO_ENTROPY ++ /* ++ * Any version of libcrypt supporting auto entropy is ++ * guaranteed to have crypt_gensalt_rn(). ++ */ ++ sp = crypt_gensalt_rn(algoid, rounds, NULL, 0, salt, sizeof(salt)); ++#else + #ifdef HAVE_CRYPT_GENSALT_R + if (on(UNIX_BLOWFISH_PASS, ctrl)) { + char entropy[17]; +@@ -423,6 +435,7 @@ PAMH_ARG_DECL(char * create_password_has + #ifdef HAVE_CRYPT_GENSALT_R + } + #endif ++#endif /* CRYPT_GENSALT_IMPLEMENTS_AUTO_ENTROPY */ + #ifdef HAVE_CRYPT_R + sp = NULL; + cdata = malloc(sizeof(*cdata)); +Index: Linux-PAM-1.3.1/modules/pam_unix/support.c +=================================================================== +--- Linux-PAM-1.3.1.orig/modules/pam_unix/support.c ++++ Linux-PAM-1.3.1/modules/pam_unix/support.c +@@ -175,6 +175,7 @@ int _set_ctrl(pam_handle_t *pamh, int fl + + if (val) { + *rounds = strtol(val, NULL, 10); ++ set(UNIX_ALGO_ROUNDS, ctrl); + free (val); + } + } +@@ -254,11 +255,13 @@ int _set_ctrl(pam_handle_t *pamh, int fl + if (*rounds < 4 || *rounds > 31) + *rounds = 5; + } else if (on(UNIX_SHA256_PASS, ctrl) || on(UNIX_SHA512_PASS, ctrl)) { +- if ((*rounds < 1000) || (*rounds == INT_MAX)) ++ if ((*rounds < 1000) || (*rounds == INT_MAX)) { + /* don't care about bogus values */ ++ *rounds = 0; + unset(UNIX_ALGO_ROUNDS, ctrl); +- if (*rounds >= 10000000) ++ } else if (*rounds >= 10000000) { + *rounds = 9999999; ++ } + } + } + diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-no-fallback.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-no-fallback.patch new file mode 100644 index 00000000..8755cf60 --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-no-fallback.patch @@ -0,0 +1,105 @@ +Index: Linux-PAM-1.3.1/modules/pam_unix/pam_unix.8.xml +=================================================================== +--- Linux-PAM-1.3.1.orig/modules/pam_unix/pam_unix.8.xml ++++ Linux-PAM-1.3.1/modules/pam_unix/pam_unix.8.xml +@@ -293,11 +293,10 @@ + <listitem> + <para> + When a user changes their password next, +- encrypt it with the SHA256 algorithm. If the +- SHA256 algorithm is not known to the <citerefentry> ++ encrypt it with the SHA256 algorithm. The ++ SHA256 algorithm must be supported by the <citerefentry> + <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> +- </citerefentry> function, +- fall back to MD5. ++ </citerefentry> function. + </para> + </listitem> + </varlistentry> +@@ -308,11 +307,10 @@ + <listitem> + <para> + When a user changes their password next, +- encrypt it with the SHA512 algorithm. If the +- SHA512 algorithm is not known to the <citerefentry> ++ encrypt it with the SHA512 algorithm. The ++ SHA512 algorithm must be supported by the <citerefentry> + <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> +- </citerefentry> function, +- fall back to MD5. ++ </citerefentry> function. + </para> + </listitem> + </varlistentry> +@@ -323,11 +321,10 @@ + <listitem> + <para> + When a user changes their password next, +- encrypt it with the blowfish algorithm. If the +- blowfish algorithm is not known to the <citerefentry> ++ encrypt it with the blowfish algorithm. The ++ blowfish algorithm must be supported by the <citerefentry> + <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> +- </citerefentry> function, +- fall back to MD5. ++ </citerefentry> function. + </para> + </listitem> + </varlistentry> +@@ -338,11 +335,10 @@ + <listitem> + <para> + When a user changes their password next, +- encrypt it with the gost-yescrypt algorithm. If the +- gost-yescrypt algorithm is not known to the <citerefentry> ++ encrypt it with the gost-yescrypt algorithm. The ++ gost-yescrypt algorithm must be supported by the <citerefentry> + <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> +- </citerefentry> function, +- fall back to MD5. ++ </citerefentry> function. + </para> + </listitem> + </varlistentry> +@@ -353,11 +349,10 @@ + <listitem> + <para> + When a user changes their password next, +- encrypt it with the yescrypt algorithm. If the +- yescrypt algorithm is not known to the <citerefentry> ++ encrypt it with the yescrypt algorithm. The ++ yescrypt algorithm must be supported by the <citerefentry> + <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> +- </citerefentry> function, +- fall back to MD5. ++ </citerefentry> function. + </para> + </listitem> + </varlistentry> +Index: Linux-PAM-1.3.1/modules/pam_unix/passverify.c +=================================================================== +--- Linux-PAM-1.3.1.orig/modules/pam_unix/passverify.c ++++ Linux-PAM-1.3.1/modules/pam_unix/passverify.c +@@ -466,10 +466,9 @@ PAMH_ARG_DECL(char * create_password_has + sp = crypt(password, salt); + #endif + if (!sp || strncmp(algoid, sp, strlen(algoid)) != 0) { +- /* libxcrypt/libc doesn't know the algorithm, use MD5 */ ++ /* libxcrypt/libc doesn't know the algorithm, error out */ + pam_syslog(pamh, LOG_ERR, +- "Algo %s not supported by the crypto backend, " +- "falling back to MD5\n", ++ "Algo %s not supported by the crypto backend.\n", + on(UNIX_YESCRYPT_PASS, ctrl) ? "yescrypt" : + on(UNIX_GOST_YESCRYPT_PASS, ctrl) ? "gost_yescrypt" : + on(UNIX_BLOWFISH_PASS, ctrl) ? "blowfish" : +@@ -481,7 +480,7 @@ PAMH_ARG_DECL(char * create_password_has + #ifdef HAVE_CRYPT_R + free(cdata); + #endif +- return crypt_md5_wrapper(password); ++ return NULL; + } + sp = x_strdup(sp); + #ifdef HAVE_CRYPT_R diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-remove-obsolete-_unix_read_password-prototype.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-remove-obsolete-_unix_read_password-prototype.patch new file mode 100644 index 00000000..14f285de --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-remove-obsolete-_unix_read_password-prototype.patch @@ -0,0 +1,34 @@ +From a2b72aeb86f297d349bc9e6a8f059fedf97a499a Mon Sep 17 00:00:00 2001 +From: "Dmitry V. Levin" <ldv@altlinux.org> +Date: Thu, 31 May 2018 00:20:18 +0000 +Subject: [PATCH] pam_unix: remove obsolete _unix_read_password prototype + +The function was removed by commit Linux-PAM-1.3.0~5 +so the function prototype should go as well. + +* modules/pam_unix/support.h (_unix_read_password): Remove. + +Complements: 7e09188c5dc4 ("pam_unix: Use pam_get_authtok() instead of +direct pam_prompt() calls.") +--- + modules/pam_unix/support.h | 7 ------- + 1 file changed, 7 deletions(-) + +diff --git a/modules/pam_unix/support.h b/modules/pam_unix/support.h +index b4c279c3..543e9b9f 100644 +--- a/modules/pam_unix/support.h ++++ b/modules/pam_unix/support.h +@@ -164,13 +164,6 @@ extern int _unix_blankpasswd(pam_handle_t *pamh,unsigned int ctrl, + const char *name); + extern int _unix_verify_password(pam_handle_t * pamh, const char *name + ,const char *p, unsigned int ctrl); +-extern int _unix_read_password(pam_handle_t * pamh +- ,unsigned int ctrl +- ,const char *comment +- ,const char *prompt1 +- ,const char *prompt2 +- ,const char *data_name +- ,const void **pass); + + extern int _unix_run_verify_binary(pam_handle_t *pamh, + unsigned int ctrl, const char *user, int *daysleft); diff --git a/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-yescrypt.patch b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-yescrypt.patch new file mode 100644 index 00000000..f04a59ce --- /dev/null +++ b/testing/source/PAM/a/pam/fedora-patches/pam-1.3.1-unix-yescrypt.patch @@ -0,0 +1,479 @@ +From 16bd523f85ede9fa9115f80e826f2d803d7e61d4 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Bj=C3=B6rn=20Esser?= <besser82@fedoraproject.org> +Date: Thu, 15 Nov 2018 16:38:05 +0100 +Subject: [PATCH] pam_unix: Add support for (gost-)yescrypt hashing methods. + +libxcrypt (v4.2 and later) has added support for the yescrypt +hashing method; gost-yescrypt has been added in v4.3. + +* modules/pam_unix/pam_unix.8.xml: Documentation for (gost-)yescrypt. +* modules/pam_unix/pam_unix_acct.c: Use 64 bit type for control flags. +* modules/pam_unix/pam_unix_auth.c: Likewise. +* modules/pam_unix/pam_unix_passwd.c: Likewise. +* modules/pam_unix/pam_unix_sess.c: Likewise. +* modules/pam_unix/passverify.c: Add support for (gost-)yescrypt. +* modules/pam_unix/passverify.h: Use 64 bit type for control flags. +* modules/pam_unix/support.c: Set sane rounds for (gost-)yescrypt. +* modules/pam_unix/support.h: Add support for (gost-)yescrypt. +--- + modules/pam_unix/pam_unix.8.xml | 35 +++++++++- + modules/pam_unix/pam_unix_acct.c | 4 +- + modules/pam_unix/pam_unix_auth.c | 4 +- + modules/pam_unix/pam_unix_passwd.c | 12 ++-- + modules/pam_unix/pam_unix_sess.c | 4 +- + modules/pam_unix/passverify.c | 8 ++- + modules/pam_unix/passverify.h | 2 +- + modules/pam_unix/support.c | 33 ++++++---- + modules/pam_unix/support.h | 101 +++++++++++++++-------------- + 9 files changed, 128 insertions(+), 75 deletions(-) + +diff --git a/modules/pam_unix/pam_unix.8.xml b/modules/pam_unix/pam_unix.8.xml +index 1b318f11..cae2aeaa 100644 +--- a/modules/pam_unix/pam_unix.8.xml ++++ b/modules/pam_unix/pam_unix.8.xml +@@ -331,14 +331,45 @@ + </para> + </listitem> + </varlistentry> ++ <varlistentry> ++ <term> ++ <option>gost_yescrypt</option> ++ </term> ++ <listitem> ++ <para> ++ When a user changes their password next, ++ encrypt it with the gost-yescrypt algorithm. If the ++ gost-yescrypt algorithm is not known to the <citerefentry> ++ <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> ++ </citerefentry> function, ++ fall back to MD5. ++ </para> ++ </listitem> ++ </varlistentry> ++ <varlistentry> ++ <term> ++ <option>yescrypt</option> ++ </term> ++ <listitem> ++ <para> ++ When a user changes their password next, ++ encrypt it with the yescrypt algorithm. If the ++ yescrypt algorithm is not known to the <citerefentry> ++ <refentrytitle>crypt</refentrytitle><manvolnum>3</manvolnum> ++ </citerefentry> function, ++ fall back to MD5. ++ </para> ++ </listitem> ++ </varlistentry> + <varlistentry> + <term> + <option>rounds=<replaceable>n</replaceable></option> + </term> + <listitem> + <para> +- Set the optional number of rounds of the SHA256, SHA512 +- and blowfish password hashing algorithms to ++ Set the optional number of rounds of the SHA256, SHA512, ++ blowfish, gost-yescrypt, and yescrypt password hashing ++ algorithms to + <replaceable>n</replaceable>. + </para> + </listitem> +diff --git a/modules/pam_unix/pam_unix_acct.c b/modules/pam_unix/pam_unix_acct.c +index fbc84e2f..d8d084ac 100644 +--- a/modules/pam_unix/pam_unix_acct.c ++++ b/modules/pam_unix/pam_unix_acct.c +@@ -62,7 +62,7 @@ + #include "support.h" + #include "passverify.h" + +-int _unix_run_verify_binary(pam_handle_t *pamh, unsigned int ctrl, ++int _unix_run_verify_binary(pam_handle_t *pamh, unsigned long long ctrl, + const char *user, int *daysleft) + { + int retval=0, child, fds[2]; +@@ -185,7 +185,7 @@ int _unix_run_verify_binary(pam_handle_t *pamh, unsigned int ctrl, + int + pam_sm_acct_mgmt(pam_handle_t *pamh, int flags, int argc, const char **argv) + { +- unsigned int ctrl; ++ unsigned long long ctrl; + const void *void_uname; + const char *uname; + int retval, daysleft; +diff --git a/modules/pam_unix/pam_unix_auth.c b/modules/pam_unix/pam_unix_auth.c +index 9d9f709d..905fc66c 100644 +--- a/modules/pam_unix/pam_unix_auth.c ++++ b/modules/pam_unix/pam_unix_auth.c +@@ -96,7 +96,7 @@ setcred_free (pam_handle_t *pamh UNUSED, void *ptr, int err UNUSED) + int + pam_sm_authenticate(pam_handle_t *pamh, int flags, int argc, const char **argv) + { +- unsigned int ctrl; ++ unsigned long long ctrl; + int retval, *ret_data = NULL; + const char *name; + const char *p; +@@ -194,7 +194,7 @@ pam_sm_setcred (pam_handle_t *pamh, int flags, + { + int retval; + const void *pretval = NULL; +- unsigned int ctrl; ++ unsigned long long ctrl; + + D(("called.")); + +diff --git a/modules/pam_unix/pam_unix_passwd.c b/modules/pam_unix/pam_unix_passwd.c +index f2c42513..df4c1233 100644 +--- a/modules/pam_unix/pam_unix_passwd.c ++++ b/modules/pam_unix/pam_unix_passwd.c +@@ -138,7 +138,7 @@ __taddr2port (const struct netconfig *nconf, const struct netbuf *nbuf) + } + #endif + +-static char *getNISserver(pam_handle_t *pamh, unsigned int ctrl) ++static char *getNISserver(pam_handle_t *pamh, unsigned long long ctrl) + { + char *master; + char *domainname; +@@ -233,7 +233,7 @@ static char *getNISserver(pam_handle_t *pamh, unsigned int ctrl) + + #ifdef WITH_SELINUX + +-static int _unix_run_update_binary(pam_handle_t *pamh, unsigned int ctrl, const char *user, ++static int _unix_run_update_binary(pam_handle_t *pamh, unsigned long long ctrl, const char *user, + const char *fromwhat, const char *towhat, int remember) + { + int retval, child, fds[2]; +@@ -388,7 +388,7 @@ static int check_old_password(const char *forwho, const char *newpass) + + static int _do_setpass(pam_handle_t* pamh, const char *forwho, + const char *fromwhat, +- char *towhat, unsigned int ctrl, int remember) ++ char *towhat, unsigned long long ctrl, int remember) + { + struct passwd *pwd = NULL; + int retval = 0; +@@ -512,7 +512,7 @@ static int _do_setpass(pam_handle_t* pamh, const char *forwho, + return retval; + } + +-static int _unix_verify_shadow(pam_handle_t *pamh, const char *user, unsigned int ctrl) ++static int _unix_verify_shadow(pam_handle_t *pamh, const char *user, unsigned long long ctrl) + { + struct passwd *pwent = NULL; /* Password and shadow password */ + struct spwd *spent = NULL; /* file entries for the user */ +@@ -542,7 +542,7 @@ static int _unix_verify_shadow(pam_handle_t *pamh, const char *user, unsigned in + } + + static int _pam_unix_approve_pass(pam_handle_t * pamh +- ,unsigned int ctrl ++ ,unsigned long long ctrl + ,const char *pass_old + ,const char *pass_new, + int pass_min_len) +@@ -600,7 +600,7 @@ static int _pam_unix_approve_pass(pam_handle_t * pamh + int + pam_sm_chauthtok(pam_handle_t *pamh, int flags, int argc, const char **argv) + { +- unsigned int ctrl, lctrl; ++ unsigned long long ctrl, lctrl; + int retval; + int remember = -1; + int rounds = 0; +diff --git a/modules/pam_unix/pam_unix_sess.c b/modules/pam_unix/pam_unix_sess.c +index 03e7dcd9..4b8af530 100644 +--- a/modules/pam_unix/pam_unix_sess.c ++++ b/modules/pam_unix/pam_unix_sess.c +@@ -67,7 +67,7 @@ int + pam_sm_open_session(pam_handle_t *pamh, int flags, int argc, const char **argv) + { + char *user_name, *service; +- unsigned int ctrl; ++ unsigned long long ctrl; + int retval; + const char *login_name; + +@@ -103,7 +103,7 @@ int + pam_sm_close_session(pam_handle_t *pamh, int flags, int argc, const char **argv) + { + char *user_name, *service; +- unsigned int ctrl; ++ unsigned long long ctrl; + int retval; + + D(("called.")); +diff --git a/modules/pam_unix/passverify.c b/modules/pam_unix/passverify.c +index 95dfe528..39e2bfac 100644 +--- a/modules/pam_unix/passverify.c ++++ b/modules/pam_unix/passverify.c +@@ -387,7 +387,7 @@ crypt_md5_wrapper(const char *pass_new) + } + + PAMH_ARG_DECL(char * create_password_hash, +- const char *password, unsigned int ctrl, int rounds) ++ const char *password, unsigned long long ctrl, int rounds) + { + const char *algoid; + #if defined(CRYPT_GENSALT_OUTPUT_SIZE) && CRYPT_GENSALT_OUTPUT_SIZE > 64 +@@ -404,6 +404,10 @@ PAMH_ARG_DECL(char * create_password_hash, + if (on(UNIX_MD5_PASS, ctrl)) { + /* algoid = "$1" */ + return crypt_md5_wrapper(password); ++ } else if (on(UNIX_YESCRYPT_PASS, ctrl)) { ++ algoid = "$y$"; ++ } else if (on(UNIX_GOST_YESCRYPT_PASS, ctrl)) { ++ algoid = "$gy$"; + } else if (on(UNIX_BLOWFISH_PASS, ctrl)) { + algoid = "$2b$"; + } else if (on(UNIX_SHA256_PASS, ctrl)) { +@@ -466,6 +470,8 @@ PAMH_ARG_DECL(char * create_password_hash, + pam_syslog(pamh, LOG_ERR, + "Algo %s not supported by the crypto backend, " + "falling back to MD5\n", ++ on(UNIX_YESCRYPT_PASS, ctrl) ? "yescrypt" : ++ on(UNIX_GOST_YESCRYPT_PASS, ctrl) ? "gost_yescrypt" : + on(UNIX_BLOWFISH_PASS, ctrl) ? "blowfish" : + on(UNIX_SHA256_PASS, ctrl) ? "sha256" : + on(UNIX_SHA512_PASS, ctrl) ? "sha512" : algoid); +diff --git a/modules/pam_unix/passverify.h b/modules/pam_unix/passverify.h +index caf7ae8a..086c28ac 100644 +--- a/modules/pam_unix/passverify.h ++++ b/modules/pam_unix/passverify.h +@@ -66,7 +66,7 @@ read_passwords(int fd, int npass, char **passwords); + #endif + + PAMH_ARG_DECL(char * create_password_hash, +- const char *password, unsigned int ctrl, int rounds); ++ const char *password, unsigned long long ctrl, int rounds); + + PAMH_ARG_DECL(int get_account_info, + const char *name, struct passwd **pwd, struct spwd **spwdent); +diff --git a/modules/pam_unix/support.c b/modules/pam_unix/support.c +index 8cbc4217..6894288d 100644 +--- a/modules/pam_unix/support.c ++++ b/modules/pam_unix/support.c +@@ -107,7 +107,7 @@ search_key (const char *key, const char *filename) + + /* this is a front-end for module-application conversations */ + +-int _make_remark(pam_handle_t * pamh, unsigned int ctrl, ++int _make_remark(pam_handle_t * pamh, unsigned long long ctrl, + int type, const char *text) + { + int retval = PAM_SUCCESS; +@@ -122,10 +122,11 @@ int _make_remark(pam_handle_t * pamh, unsigned int ctrl, + * set the control flags for the UNIX module. + */ + +-int _set_ctrl(pam_handle_t *pamh, int flags, int *remember, int *rounds, +- int *pass_min_len, int argc, const char **argv) ++unsigned long long _set_ctrl(pam_handle_t *pamh, int flags, int *remember, ++ int *rounds, int *pass_min_len, int argc, ++ const char **argv) + { +- unsigned int ctrl; ++ unsigned long long ctrl; + char *val; + int j; + +@@ -243,15 +244,23 @@ int _set_ctrl(pam_handle_t *pamh, int flags, int *remember, int *rounds, + set(UNIX__NONULL, ctrl); + } + +- /* Set default rounds for blowfish */ +- if (on(UNIX_BLOWFISH_PASS, ctrl) && off(UNIX_ALGO_ROUNDS, ctrl) && rounds != NULL) { +- *rounds = 5; +- set(UNIX_ALGO_ROUNDS, ctrl); ++ /* Set default rounds for blowfish, gost-yescrypt and yescrypt */ ++ if (off(UNIX_ALGO_ROUNDS, ctrl) && rounds != NULL) { ++ if (on(UNIX_BLOWFISH_PASS, ctrl) || ++ on(UNIX_GOST_YESCRYPT_PASS, ctrl) || ++ on(UNIX_YESCRYPT_PASS, ctrl)) { ++ *rounds = 5; ++ set(UNIX_ALGO_ROUNDS, ctrl); ++ } + } + + /* Enforce sane "rounds" values */ + if (on(UNIX_ALGO_ROUNDS, ctrl)) { +- if (on(UNIX_BLOWFISH_PASS, ctrl)) { ++ if (on(UNIX_GOST_YESCRYPT_PASS, ctrl) || ++ on(UNIX_YESCRYPT_PASS, ctrl)) { ++ if (*rounds < 3 || *rounds > 11) ++ *rounds = 5; ++ } else if (on(UNIX_BLOWFISH_PASS, ctrl)) { + if (*rounds < 4 || *rounds > 31) + *rounds = 5; + } else if (on(UNIX_SHA256_PASS, ctrl) || on(UNIX_SHA512_PASS, ctrl)) { +@@ -532,7 +541,7 @@ int _unix_comesfromsource(pam_handle_t *pamh, + #include <sys/wait.h> + + static int _unix_run_helper_binary(pam_handle_t *pamh, const char *passwd, +- unsigned int ctrl, const char *user) ++ unsigned long long ctrl, const char *user) + { + int retval, child, fds[2]; + struct sigaction newsa, oldsa; +@@ -658,7 +667,7 @@ static int _unix_run_helper_binary(pam_handle_t *pamh, const char *passwd, + */ + + int +-_unix_blankpasswd (pam_handle_t *pamh, unsigned int ctrl, const char *name) ++_unix_blankpasswd (pam_handle_t *pamh, unsigned long long ctrl, const char *name) + { + struct passwd *pwd = NULL; + char *salt = NULL; +@@ -706,7 +715,7 @@ _unix_blankpasswd (pam_handle_t *pamh, unsigned int ctrl, const char *name) + } + + int _unix_verify_password(pam_handle_t * pamh, const char *name +- ,const char *p, unsigned int ctrl) ++ ,const char *p, unsigned long long ctrl) + { + struct passwd *pwd = NULL; + char *salt = NULL; +diff --git a/modules/pam_unix/support.h b/modules/pam_unix/support.h +index 543e9b9f..e02c05e0 100644 +--- a/modules/pam_unix/support.h ++++ b/modules/pam_unix/support.h +@@ -22,8 +22,8 @@ + + typedef struct { + const char *token; +- unsigned int mask; /* shall assume 32 bits of flags */ +- unsigned int flag; ++ unsigned long long mask; /* shall assume 64 bits of flags */ ++ unsigned long long flag; + unsigned int is_hash_algo; + } UNIX_Ctrls; + +@@ -48,7 +48,7 @@ typedef struct { + + /* the generic mask */ + +-#define _ALL_ON_ (~0U) ++#define _ALL_ON_ (~0ULL) + + /* end of macro definitions definitions for the control flags */ + +@@ -98,47 +98,51 @@ typedef struct { + #define UNIX_QUIET 28 /* Don't print informational messages */ + #define UNIX_NO_PASS_EXPIRY 29 /* Don't check for password expiration if not used for authentication */ + #define UNIX_DES 30 /* DES, default */ ++#define UNIX_GOST_YESCRYPT_PASS 31 /* new password hashes will use gost-yescrypt */ ++#define UNIX_YESCRYPT_PASS 32 /* new password hashes will use yescrypt */ + /* -------------- */ +-#define UNIX_CTRLS_ 31 /* number of ctrl arguments defined */ ++#define UNIX_CTRLS_ 33 /* number of ctrl arguments defined */ + +-#define UNIX_DES_CRYPT(ctrl) (off(UNIX_MD5_PASS,ctrl)&&off(UNIX_BIGCRYPT,ctrl)&&off(UNIX_SHA256_PASS,ctrl)&&off(UNIX_SHA512_PASS,ctrl)&&off(UNIX_BLOWFISH_PASS,ctrl)) ++#define UNIX_DES_CRYPT(ctrl) (off(UNIX_MD5_PASS,ctrl)&&off(UNIX_BIGCRYPT,ctrl)&&off(UNIX_SHA256_PASS,ctrl)&&off(UNIX_SHA512_PASS,ctrl)&&off(UNIX_BLOWFISH_PASS,ctrl)&&off(UNIX_GOST_YESCRYPT_PASS,ctrl)&&off(UNIX_YESCRYPT_PASS,ctrl)) + + static const UNIX_Ctrls unix_args[UNIX_CTRLS_] = + { +-/* symbol token name ctrl mask ctrl * +- * ----------------------- ------------------- --------------------- -------- */ +- +-/* UNIX__OLD_PASSWD */ {NULL, _ALL_ON_, 01, 0}, +-/* UNIX__VERIFY_PASSWD */ {NULL, _ALL_ON_, 02, 0}, +-/* UNIX__IAMROOT */ {NULL, _ALL_ON_, 04, 0}, +-/* UNIX_AUDIT */ {"audit", _ALL_ON_, 010, 0}, +-/* UNIX_USE_FIRST_PASS */ {"use_first_pass", _ALL_ON_^(060), 020, 0}, +-/* UNIX_TRY_FIRST_PASS */ {"try_first_pass", _ALL_ON_^(060), 040, 0}, +-/* UNIX_AUTHTOK_TYPE */ {"authtok_type=", _ALL_ON_, 0100, 0}, +-/* UNIX__PRELIM */ {NULL, _ALL_ON_^(0600), 0200, 0}, +-/* UNIX__UPDATE */ {NULL, _ALL_ON_^(0600), 0400, 0}, +-/* UNIX__NONULL */ {NULL, _ALL_ON_, 01000, 0}, +-/* UNIX__QUIET */ {NULL, _ALL_ON_, 02000, 0}, +-/* UNIX_USE_AUTHTOK */ {"use_authtok", _ALL_ON_, 04000, 0}, +-/* UNIX_SHADOW */ {"shadow", _ALL_ON_, 010000, 0}, +-/* UNIX_MD5_PASS */ {"md5", _ALL_ON_^(0260420000), 020000, 1}, +-/* UNIX__NULLOK */ {"nullok", _ALL_ON_^(01000), 0, 0}, +-/* UNIX_DEBUG */ {"debug", _ALL_ON_, 040000, 0}, +-/* UNIX_NODELAY */ {"nodelay", _ALL_ON_, 0100000, 0}, +-/* UNIX_NIS */ {"nis", _ALL_ON_, 0200000, 0}, +-/* UNIX_BIGCRYPT */ {"bigcrypt", _ALL_ON_^(0260420000), 0400000, 1}, +-/* UNIX_LIKE_AUTH */ {"likeauth", _ALL_ON_, 01000000, 0}, +-/* UNIX_REMEMBER_PASSWD */ {"remember=", _ALL_ON_, 02000000, 0}, +-/* UNIX_NOREAP */ {"noreap", _ALL_ON_, 04000000, 0}, +-/* UNIX_BROKEN_SHADOW */ {"broken_shadow", _ALL_ON_, 010000000, 0}, +-/* UNIX_SHA256_PASS */ {"sha256", _ALL_ON_^(0260420000), 020000000, 1}, +-/* UNIX_SHA512_PASS */ {"sha512", _ALL_ON_^(0260420000), 040000000, 1}, +-/* UNIX_ALGO_ROUNDS */ {"rounds=", _ALL_ON_, 0100000000, 0}, +-/* UNIX_BLOWFISH_PASS */ {"blowfish", _ALL_ON_^(0260420000), 0200000000, 1}, +-/* UNIX_MIN_PASS_LEN */ {"minlen=", _ALL_ON_, 0400000000, 0}, +-/* UNIX_QUIET */ {"quiet", _ALL_ON_, 01000000000, 0}, +-/* UNIX_NO_PASS_EXPIRY */ {"no_pass_expiry", _ALL_ON_, 02000000000, 0}, +-/* UNIX_DES */ {"des", _ALL_ON_^(0260420000), 0, 1}, ++/* symbol token name ctrl mask ctrl * ++ * --------------------------- -------------------- ------------------------- ---------------- */ ++ ++/* UNIX__OLD_PASSWD */ {NULL, _ALL_ON_, 01, 0}, ++/* UNIX__VERIFY_PASSWD */ {NULL, _ALL_ON_, 02, 0}, ++/* UNIX__IAMROOT */ {NULL, _ALL_ON_, 04, 0}, ++/* UNIX_AUDIT */ {"audit", _ALL_ON_, 010, 0}, ++/* UNIX_USE_FIRST_PASS */ {"use_first_pass", _ALL_ON_^(060ULL), 020, 0}, ++/* UNIX_TRY_FIRST_PASS */ {"try_first_pass", _ALL_ON_^(060ULL), 040, 0}, ++/* UNIX_AUTHTOK_TYPE */ {"authtok_type=", _ALL_ON_, 0100, 0}, ++/* UNIX__PRELIM */ {NULL, _ALL_ON_^(0600ULL), 0200, 0}, ++/* UNIX__UPDATE */ {NULL, _ALL_ON_^(0600ULL), 0400, 0}, ++/* UNIX__NONULL */ {NULL, _ALL_ON_, 01000, 0}, ++/* UNIX__QUIET */ {NULL, _ALL_ON_, 02000, 0}, ++/* UNIX_USE_AUTHTOK */ {"use_authtok", _ALL_ON_, 04000, 0}, ++/* UNIX_SHADOW */ {"shadow", _ALL_ON_, 010000, 0}, ++/* UNIX_MD5_PASS */ {"md5", _ALL_ON_^(015660420000ULL), 020000, 1}, ++/* UNIX__NULLOK */ {"nullok", _ALL_ON_^(01000ULL), 0, 0}, ++/* UNIX_DEBUG */ {"debug", _ALL_ON_, 040000, 0}, ++/* UNIX_NODELAY */ {"nodelay", _ALL_ON_, 0100000, 0}, ++/* UNIX_NIS */ {"nis", _ALL_ON_, 0200000, 0}, ++/* UNIX_BIGCRYPT */ {"bigcrypt", _ALL_ON_^(015660420000ULL), 0400000, 1}, ++/* UNIX_LIKE_AUTH */ {"likeauth", _ALL_ON_, 01000000, 0}, ++/* UNIX_REMEMBER_PASSWD */ {"remember=", _ALL_ON_, 02000000, 0}, ++/* UNIX_NOREAP */ {"noreap", _ALL_ON_, 04000000, 0}, ++/* UNIX_BROKEN_SHADOW */ {"broken_shadow", _ALL_ON_, 010000000, 0}, ++/* UNIX_SHA256_PASS */ {"sha256", _ALL_ON_^(015660420000ULL), 020000000, 1}, ++/* UNIX_SHA512_PASS */ {"sha512", _ALL_ON_^(015660420000ULL), 040000000, 1}, ++/* UNIX_ALGO_ROUNDS */ {"rounds=", _ALL_ON_, 0100000000, 0}, ++/* UNIX_BLOWFISH_PASS */ {"blowfish", _ALL_ON_^(015660420000ULL), 0200000000, 1}, ++/* UNIX_MIN_PASS_LEN */ {"minlen=", _ALL_ON_, 0400000000, 0}, ++/* UNIX_QUIET */ {"quiet", _ALL_ON_, 01000000000, 0}, ++/* UNIX_NO_PASS_EXPIRY */ {"no_pass_expiry", _ALL_ON_, 02000000000, 0}, ++/* UNIX_DES */ {"des", _ALL_ON_^(015660420000ULL), 0, 1}, ++/* UNIX_GOST_YESCRYPT_PASS */ {"gost_yescrypt", _ALL_ON_^(015660420000ULL), 04000000000, 1}, ++/* UNIX_YESCRYPT_PASS */ {"yescrypt", _ALL_ON_^(015660420000ULL), 010000000000, 1}, + }; + + #define UNIX_DEFAULTS (unix_args[UNIX__NONULL].flag) +@@ -151,20 +155,23 @@ static const UNIX_Ctrls unix_args[UNIX_CTRLS_] = + _pam_drop(xx); \ + } + +-extern int _make_remark(pam_handle_t * pamh, unsigned int ctrl +- ,int type, const char *text); +-extern int _set_ctrl(pam_handle_t * pamh, int flags, int *remember, int *rounds, +- int *pass_min_len, int argc, const char **argv); ++extern int _make_remark(pam_handle_t * pamh, unsigned long long ctrl, ++ int type, const char *text); ++extern unsigned long long _set_ctrl(pam_handle_t * pamh, int flags, ++ int *remember, int *rounds, ++ int *pass_min_len, ++ int argc, const char **argv); + extern int _unix_getpwnam (pam_handle_t *pamh, + const char *name, int files, int nis, + struct passwd **ret); + extern int _unix_comesfromsource (pam_handle_t *pamh, + const char *name, int files, int nis); +-extern int _unix_blankpasswd(pam_handle_t *pamh,unsigned int ctrl, ++extern int _unix_blankpasswd(pam_handle_t *pamh, unsigned long long ctrl, + const char *name); +-extern int _unix_verify_password(pam_handle_t * pamh, const char *name +- ,const char *p, unsigned int ctrl); ++extern int _unix_verify_password(pam_handle_t * pamh, const char *name, ++ const char *p, unsigned long long ctrl); + + extern int _unix_run_verify_binary(pam_handle_t *pamh, +- unsigned int ctrl, const char *user, int *daysleft); ++ unsigned long long ctrl, ++ const char *user, int *daysleft); + #endif /* _PAM_UNIX_SUPPORT_H */ diff --git a/testing/source/PAM/a/pam/pam.SlackBuild b/testing/source/PAM/a/pam/pam.SlackBuild new file mode 100755 index 00000000..ccd19e30 --- /dev/null +++ b/testing/source/PAM/a/pam/pam.SlackBuild @@ -0,0 +1,232 @@ +#!/bin/sh + +# Copyright 2010 Vincent Batts, vbatts@hashbangbash.com +# Copyright 2010, 2011 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +SRCNAM=Linux-PAM +PKGNAM=pam +PAMRHVER=${PAMRHVER:-$(echo pam-redhat-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" + exit 0 +fi + +NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +rm -rf $SRCNAM-$VERSION +tar xvf $CWD/$SRCNAM-$VERSION.tar.?z || exit 1 +cd $SRCNAM-$VERSION || exit 1 + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \+ -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \+ + +# Better take the Red Hat added modules and patches, because that's very +# likely to be the most standard as far as PAM goes: +tar xvf $CWD/pam-redhat-$PAMRHVER.tar.?z || exit 1 +for file in CHANGELOG COPYING README ; do + mv pam-redhat-$PAMRHVER/${file}* ./${file}.pam-redhat +done +mv pam-redhat-$PAMRHVER/* modules +zcat $CWD/fedora-patches/pam-1.3.1-redhat-modules.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-noflex.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.1.3-nouserenv.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.1.6-limits-user.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.1.8-full-relro.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.0-pwhistory-helper.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.1.8-audit-user-mgmt.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.0-unix-nomsg.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-coverity.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-remove-obsolete-_unix_read_password-prototype.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-bcrypt_b.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-gensalt-autoentropy.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-crypt_checksalt.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-yescrypt.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-no-fallback.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-motd-multiple-paths.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-checksalt_syslog.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/fedora-patches/pam-1.3.1-unix-fix_checksalt_syslog.patch.gz | patch -p1 --verbose || exit 1 + +# pam_tally2 removed in recent redhat-modules.patch, but we'll keep it +# for now since system-auth in the shadow package uses it. Perhaps see if +# pam_faillock can replace the usage there? +zcat $CWD/patches/pam.pam_tally2.slackware.diff.gz | patch -p1 --verbose || exit 1 + +# Upstream git patch to prevent pam_tally2 from doing an fsync() +# with every failed login. This can cause system slowdowns, especially +# on Internet-connected machines that may endure endless dictionary +# attacks. +zcat $CWD/patches/pam.pam_tally2.no.fsync.patch.gz | patch -p1 --verbose || exit 1 + +# Improve the comments in /etc/environment: +zcat $CWD/patches/pam.etc.environment.better.comments.diff.gz | patch -p1 --verbose || exit 1 + +autoreconf -ivf || exit 1 + +# Using --enable-securedir=/lib/security/ because some downstream software +# (last I checked) assumes this, so /lib64/security/ was a problem... +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/ \ + --libdir=/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --includedir=/usr/include/security \ + --enable-securedir=/lib/security \ + --datarootdir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --disable-regenerate-docu \ + --disable-audit \ + --disable-prelude \ + --disable-rpath \ + --disable-selinux \ + --disable-static \ + --build=$ARCH-slackware-linux || exit 1 + +# Make these man pages or the build falls over later +xmlto man modules/pam_faillock/faillock.8.xml -o modules/pam_faillock/ +xmlto man modules/pam_faillock/pam_faillock.8.xml -o modules/pam_faillock/ +xmlto man modules/pam_pwhistory/pwhistory_helper.8.xml -o modules/pam_pwhistory/ + +make -C po update-gmo +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Don't ship .la files: +rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la + +# The ones in /lib/security can also go: +rm -f $PKG/lib/security/*.la + +# Add extra symlinks added by pam.spec: +( cd $PKG/lib/security + for type in acct auth passwd session ; do + ln -sf pam_unix.so pam_unix_${type}.so + done +) + +# This is a pam helper that can only be called from pam +chown root:root $PKG/sbin/unix_chkpwd +chmod 6755 $PKG/sbin/unix_chkpwd + +# This package can own the /etc/pam.d/ directory +mkdir -p $PKG/etc/pam.d + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Don't clobber config files: +find $PKG/etc -type f -exec mv {} {}.new \; + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING* Copyright NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi +if [ -r CHANGELOG ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat CHANGELOG | head -n 1000 > $DOCSDIR/CHANGELOG + touch -r CHANGELOG $DOCSDIR/CHANGELOG +fi +rm -f $PKG/usr/doc/$PKGNAM-$VERSION/index.html + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +# Append config statements to the install/doinst.sh: +( cd $PKG + for i in $(find etc -type f -name "*.new") ; do + echo "config $i" >> $PKG/install/doinst.sh ; + done +) + +cd $PKG +/sbin/makepkg -p -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/testing/source/PAM/a/pam/pam.url b/testing/source/PAM/a/pam/pam.url new file mode 100644 index 00000000..07dfcb99 --- /dev/null +++ b/testing/source/PAM/a/pam/pam.url @@ -0,0 +1,2 @@ +#http://www.linux-pam.org/library/Linux-PAM-1.3.1.tar.bz2 +https://github.com/linux-pam/linux-pam/releases diff --git a/testing/source/PAM/a/pam/patches/pam.etc.environment.better.comments.diff b/testing/source/PAM/a/pam/patches/pam.etc.environment.better.comments.diff new file mode 100644 index 00000000..6899e4c1 --- /dev/null +++ b/testing/source/PAM/a/pam/patches/pam.etc.environment.better.comments.diff @@ -0,0 +1,15 @@ +--- ./modules/pam_env/environment.orig 2017-02-10 04:10:15.000000000 -0600 ++++ ./modules/pam_env/environment 2020-01-02 14:40:48.793005303 -0600 +@@ -1,5 +1,10 @@ +-# +-# This file is parsed by pam_env module ++# /etc/environment ++# This file is parsed by pam_env module. ++# This file may contain environment variable settings that should be used ++# system-wide. Please note that it is not a script file and should only ++# contain assignment expressions, one per line. ++# The environment variables in this file will be loaded before those in other ++# files such as: /etc/profile, /etc/profile.d/*, ~/.profile, etc. + # + # Syntax: simple "KEY=VAL" pairs on separate lines + # diff --git a/testing/source/PAM/a/pam/patches/pam.pam_tally2.no.fsync.patch b/testing/source/PAM/a/pam/patches/pam.pam_tally2.no.fsync.patch new file mode 100644 index 00000000..15b40115 --- /dev/null +++ b/testing/source/PAM/a/pam/patches/pam.pam_tally2.no.fsync.patch @@ -0,0 +1,35 @@ +From b136bff25e93be6f11de74aca03569022364b973 Mon Sep 17 00:00:00 2001 +From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name> +Date: Mon, 25 Feb 2019 20:50:48 +0100 +Subject: [PATCH] pam_tally2: Remove unnecessary fsync() + +pam_tally2 does fsync() after writing to a tally file. +This causes hard drive cache flushes on every failed SSH login on many +(if not most) filesystems. +And an internet-exposed machine can have a lot of these failed logins. + +This operation however doesn't seem to be necessary - the pam_tally2 +module does not do any operation which would need explicit post-crash +ordering, it just does simple file reads and writes. +And doing a fsync() after them doesn't close any race if the system happens +to crash between a write being posted and its fsync() completion. + +Let's remove this operation to get rid of all these extra cache flushes. +--- + modules/pam_tally2/pam_tally2.c | 4 ---- + 1 file changed, 4 deletions(-) + +diff --git a/modules/pam_tally2/pam_tally2.c b/modules/pam_tally2/pam_tally2.c +index 984edf6a..ce7f5aee 100644 +--- a/modules/pam_tally2/pam_tally2.c ++++ b/modules/pam_tally2/pam_tally2.c +@@ -484,10 +484,6 @@ set_tally(pam_handle_t *pamh, uid_t uid, + } + } + +- if (fsync(*tfile)) { +- pam_syslog(pamh, LOG_ALERT, "update (fsync) failed for %s: %m", filename); +- return PAM_AUTH_ERR; +- } + return PAM_SUCCESS; + } diff --git a/testing/source/PAM/a/pam/patches/pam.pam_tally2.slackware.diff b/testing/source/PAM/a/pam/patches/pam.pam_tally2.slackware.diff new file mode 100644 index 00000000..8ab85321 --- /dev/null +++ b/testing/source/PAM/a/pam/patches/pam.pam_tally2.slackware.diff @@ -0,0 +1,11 @@ +--- ./modules/Makefile.am.orig 2019-07-16 13:18:28.619322386 -0500 ++++ ./modules/Makefile.am 2019-07-16 13:45:49.260371056 -0500 +@@ -10,7 +10,7 @@ + pam_mkhomedir pam_motd pam_namespace pam_nologin \ + pam_permit pam_pwhistory pam_rhosts pam_rootok pam_securetty \ + pam_selinux pam_sepermit pam_shells pam_stress \ +- pam_succeed_if pam_time pam_timestamp \ ++ pam_succeed_if pam_tally2 pam_time pam_timestamp \ + pam_tty_audit pam_umask \ + pam_unix pam_userdb pam_warn pam_wheel pam_xauth + diff --git a/testing/source/PAM/a/pam/slack-desc b/testing/source/PAM/a/pam/slack-desc new file mode 100644 index 00000000..7c0bcbbd --- /dev/null +++ b/testing/source/PAM/a/pam/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +pam: pam (Pluggable Authentication Modules) +pam: +pam: PAM = Pluggable Authentication Modules. Basically, it is a flexible +pam: mechanism for authenticating users. PAM provides a way to develop +pam: programs that are independent of authentication scheme. However, +pam: these programs will need "authentication modules" (and libpam) at +pam: run-time in order to work. +pam: +pam: Homepage: http://www.linux-pam.org/ +pam: +pam: diff --git a/testing/source/PAM/build-all-pam-packages.sh b/testing/source/PAM/build-all-pam-packages.sh new file mode 100755 index 00000000..3f884611 --- /dev/null +++ b/testing/source/PAM/build-all-pam-packages.sh @@ -0,0 +1,17 @@ +#!/bin/bash + +cd $(dirname $0) ; CWD=$(pwd) + +rm -rf /tmp/pam-packages +TMP=/tmp/pam-packages +export TMP +mkdir -p $TMP + +BUILDLIST=$CWD/buildlist ./make_world.sh + +# Give everything a _pam build suffix while it remains in /testing: +( cd $TMP + for package in *.txz ; do + mv $package $(basename $package .txz)_pam.txz + done +) diff --git a/testing/source/PAM/buildlist b/testing/source/PAM/buildlist new file mode 100644 index 00000000..b05fcbf6 --- /dev/null +++ b/testing/source/PAM/buildlist @@ -0,0 +1,33 @@ +a/cracklib/cracklib.SlackBuild +a/pam/pam.SlackBuild +a/libpwquality/libpwquality.SlackBuild +source/a/shadow/shadow.SlackBuild +source/a/util-linux/util-linux.SlackBuild +source/a/libcgroup/libcgroup.SlackBuild +source/ap/cups/cups.SlackBuild +source/ap/hplip/hplip.SlackBuild +source/ap/screen/screen.SlackBuild +source/ap/sudo/sudo.SlackBuild +source/l/ConsoleKit2/ConsoleKit2.SlackBuild +source/l/gnome-keyring/gnome-keyring.SlackBuild +source/l/polkit/polkit.SlackBuild +source/l/system-config-printer/system-config-printer.SlackBuild +source/n/dovecot/dovecot.SlackBuild +source/n/netatalk/netatalk.SlackBuild +source/n/openssh/openssh.SlackBuild +source/n/openvpn/openvpn.SlackBuild +source/n/popa3d/popa3d.SlackBuild +source/n/ppp/ppp.SlackBuild +source/n/proftpd/proftpd.SlackBuild +source/n/samba/samba.SlackBuild +source/n/vsftpd/vsftpd.SlackBuild +source/x/x11/x11.SlackBuild app xdm +source/l/libcap/libcap.SlackBuild +source/n/cyrus-sasl/cyrus-sasl.SlackBuild +source/n/cifs-utils/cifs-utils.SlackBuild +source/n/netkit-rsh/netkit-rsh.SlackBuild +source/ap/at/at.SlackBuild +source/ap/mariadb/mariadb.SlackBuild +source/xap/xlockmore/xlockmore.SlackBuild +source/xap/xscreensaver/xscreensaver.SlackBuild +source/kde/kde.SlackBuild kdebase:kde-workspace diff --git a/testing/source/PAM/make_world.sh b/testing/source/PAM/make_world.sh new file mode 100755 index 00000000..a269e96f --- /dev/null +++ b/testing/source/PAM/make_world.sh @@ -0,0 +1,302 @@ +#!/bin/bash +# Copyright 2018 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# make_world for Slackware: rebuilds all the SlackBuild scripts that are +# listed in the given build list. +# Each line needs to look like (for example, and without beginning with "# "): +# a/grep/grep.SlackBuild +# For x11/KDE packages, you may specify a specific package to be built using +# the arguments understood by the SlackBuild. For example: +# kde/kde.SlackBuild kdelibs:kdelibs +# Any line beginning with "#" will be skipped. + +# WARNING: This script has the potential to mess up your system. +# It is not recommended to run this on a production machine. +# This script is meant to be used on a fully installed and updated system. +# Using it on a partially installed system may result in broken packages, +# packages with missing features, or build failures. If there are circular +# dependencies, more than one build may be needed to get a correct package. +# +# Slackware is not Gentoo. +# For Amusement Purposes Only. + +# Not all SlackBuilds are compatible with this script. In order for a build +# script to work, it needs these features: +# 1) cd into the script directory when run i.e.: cd $(dirname $0) ; CWD=$(pwd) +# 2) Handle $TMP properly (less of an issue if you don't change $TMP) +# 3) Support output package name reporting with PRINT_PACKAGE_NAME=yes + +cd $(dirname $0) ; CWD=$(pwd) +# Some SlackBuilds do not work (yet) with a different $TMP setting. +TMP=${TMP:-/tmp} +export TMP +# Where the SlackBuild script puts the built package (i.e., $TMP). +OUTPUT_LOCATION=${OUTPUT_LOCATION:-$TMP} +# Used for logs and lock files. +LOGDIR=$TMP/make_world +# Lockfiles. You might need to purge these before restarting a build. +mkdir -p $LOGDIR/lock + +# Set a custom Slackware source directory. By default we assume we are already +# in the source directory. +SLACKWARE_SOURCE_DIRECTORY=${SLACKWARE_SOURCE_DIRECTORY:-} +if [ ! -z "$SLACKWARE_SOURCE_DIRECTORY" ]; then + # Make sure this ends in '/': + if [ ! "$(echo $SLACKWARE_SOURCE_DIRECTORY | rev | cut -b 1)" = "/" ]; then + SLACKWARE_SOURCE_DIRECTORY="${SLACKWARE_SOURCE_DIRECTORY}/" + fi +fi + +# To wipe build directories and package creation directories after each +# package is built, set this to anything other than "no". You might need +# to use this if you're short on build space. NOTE: if you use this +# feature, you can NOT run more than one copy of this script at the same +# time! It will wipe build trees for other packages before they can finish. +# Otherwise, file locking is used and you may run as many parallel copies +# of this script as you think will help to speed things along. +WIPE_AFTER_BUILD=${WIPE_AFTER_BUILD:-no} + +# Be kind, don't hit control-c! If you do, you might leave broken packages, +# logfiles, and locks in $TMP that will cause problems for you later. If you're +# not in a huge hurry to quit, create this file (replace with $TMP if needed): +# /tmp/make_world/lock/abort +# This will cause all instances of make_world.sh to exit when they complete the +# task they are working on. +rm -f $LOGDIR/lock/abort + +BUILDLIST=${BUILDLIST:-$LOGDIR/buildlist} +if [ ! -r $BUILDLIST -a ! -r ${BUILDLIST}.lock ]; then + # The buildlist does not exist, so attempt to create one that builds + # everything except for the kernels (the kernel scripts are not compatible + # with make_world.sh, mostly because of the need to reboot the new kernel). + touch ${BUILDLIST} ${BUILDLIST}.lock + echo "Generating list of packages to build in ${BUILDLIST}..." + for script in ${SLACKWARE_SOURCE_DIRECTORY}*/*/*.SlackBuild ; do + # Only add the script if the SlackBuild name matches the directory name: + if [ "$(basename $(echo $script | cut -f 1 -d ' ') .SlackBuild)" = "$(echo $(dirname $(echo $script | cut -f 1 -d ' ')) | rev | cut -f 1 -d / | rev)" ]; then + if [ "$uname -m)" = "x86_64" -a "$(basename $(echo $script | cut -f 1 -d ' '))" = "isapnptools.SlackBuild" ]; then + # Don't try to build isapnptools on x86_64. + continue + fi + echo $script >> $BUILDLIST + fi + done + if [ -r ${SLACKWARE_SOURCE_DIRECTORY}kde/kde.SlackBuild ]; then + echo "${SLACKWARE_SOURCE_DIRECTORY}kde/kde.SlackBuild" >> $BUILDLIST + fi + rm -f ${BUILDLIST}.lock + # Set GEN_LIST_ONLY=yes if you'd like to exit after generating a build list. + # You might want to do this to comment some build scripts out first, or if + # you'd like to sort it into a "magic build order". ;-) This script is pretty + # good at just brute-forcing things, though (with a few runs). + if [ "$GEN_LIST_ONLY" = "yes" ]; then + echo "Generated ${BUILDLIST}. Exiting." + exit 0 + fi +fi +if [ -r ${BUILDLIST}.lock ]; then + echo -n "Waiting for ${BUILDLIST}.lock to be removed..." + while [ 0 ]; do + if [ ! -r ${BUILDLIST}.lock ]; then + break + fi + sleep 5 + done + echo " done." +fi +echo "Using buildlist $BUILDLIST." + +# To use shuffle mode (build packages in a random order each time through), +# pass SHUFFLE=yes (or anything other than "no") to this script. +SHUFFLE=${SHUFFLE:-no} +if [ "$SHUFFLE" = "no" ]; then + SHUF=cat +else + SHUF=shuf +fi + +# To keep repeating the build list, set $REPEAT to anything other than "no": +REPEAT=${REPEAT:-no} + +# To always rebuild a SlackBuild even if already built packages are found, set +# FORCE_BUILD=yes: +FORCE_BUILD=${FORCE_BUILD:-no} + +# Function to do the build: +do_build() { + if [ "$HAVE_GLOBAL_LOCK" = "true" ]; then + # Wait for other builds to complete + echo -n "have global lock, waiting for other builds to complete... " + while [ 0 ]; do + sleep 5 + if ! /bin/ls $LOGDIR/lock/*.lock 1> /dev/null 2> /dev/null ; then + echo -n "done, continuing... " + break + fi + done + fi + # If we're trying again, we don't want to leave a failure log in the logs + # directory. But save it just in case... + if [ -r $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log.failed ]; then + mkdir -p $LOGDIR/faillog-backups + mv $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log.failed $LOGDIR/faillog-backups + fi + $buildscript &> $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log + if [ ! $? = 0 ]; then + # Exit code from SlackBuild indicated an error: + echo "$(PRINT_PACKAGE_NAME=foo $buildscript | head -n 1) failed to build." + mv $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log.failed + elif [ ! -r $OUTPUT_LOCATION/$(PRINT_PACKAGE_NAME=foo $buildscript | head -n 1) ]; then + # No error code returned from SlackBuild, but the package(s) were not found. + # Possibly the SlackBuild doesn't honor $TMP, and a non-/tmp $TMP variable was set? + echo "$(PRINT_PACKAGE_NAME=foo $buildscript | head -n 1) failed to build." + mv $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log $LOGDIR/$(basename $(echo $buildscript | cut -f 1 -d ' ')).log.failed + else + # Figure out a progress report to include with the successful build message: + cat $BUILDLIST | grep -v "^$" | grep -v "^#" | sort | uniq | cut -f 1 -d ' ' | rev | cut -f 1 -d / | rev > $LOGDIR/tmp-pkgs-to-build.$$ + # OK, we don't know if every *.log is actually finished if we're running + # more than one make_world.sh, but whatever. It's an estimate. + /bin/ls $LOGDIR/*.log | rev | cut -f 2,3 -d . | cut -f 1 -d / | rev > $LOGDIR/tmp-pkgs-built-or-building.$$ + NUMTOTAL="$(cat $LOGDIR/tmp-pkgs-to-build.$$ | wc -l)" + NUMBUILT="$(grep -x -f $LOGDIR/tmp-pkgs-built-or-building.$$ $LOGDIR/tmp-pkgs-to-build.$$ | wc -l)" + rm -f $LOGDIR/tmp-pkgs-to-build.$$ $LOGDIR/tmp-pkgs-built-or-building.$$ + echo "$(PRINT_PACKAGE_NAME=foo $buildscript | head -n 1) built successfully ($NUMBUILT/$NUMTOTAL)." + for package in $(PRINT_PACKAGE_NAME=foo $buildscript) ; do + upgradepkg --install-new --reinstall $OUTPUT_LOCATION/$package > /dev/null 2>&1 + done + # The post-build cleanup is pretty sloppy. It will not clean up all of + # the build-related residue, and it may possibly delete some things that + # this script did not put there. It's also not compatible with running + # more than one copy of make_world.sh simultaneously. + # Think more than twice before using this. + if [ ! "$WIPE_AFTER_BUILD" = "no" ]; then + ( cd $TMP + rm -f configure CMakeLists.txt + for findconfigure in */configure ; do + rm -rf "$(dirname $findconfigure)" + done + for findautogen in */autogen.sh ; do + rm -rf "$(dirname $findautogen)" + done + for findcmake in */CMakeLists.txt ; do + rm -rf "$(dirname $findcmake)" + done + for findmake in */Makefile ; do + rm -rf "$(dirname $findmake)" + done + for findmeson in */meson.build ; do + rm -rf "$(dirname $findmeson)" + done + for findpython in */setup.py ; do + rm -rf "$(dirname $findpython)" + done + rm -rf package-* + ) + fi + fi +} + +# Main loop: +while [ 0 ]; do + # Skip any blank lines or lines in the buildlist that begin with #: + cat $BUILDLIST | grep -v "^$" | grep -v "^#" | $SHUF | while read buildscript ; do + if [ -r $LOGDIR/lock/abort ]; then + echo "Exiting (abort requested)." + exit 0 + fi + # If there's a global lock, we have to wait for it to be released: + if [ -r $LOGDIR/lock/lock.global ]; then + HELD_BY="$(cat $LOGDIR/lock/lock.global)" + echo -n "Waiting for global lock release (held by ${HELD_BY})... " + while [ 0 ]; do + sleep 10 + if [ ! -r $LOGDIR/lock/lock.global ]; then + echo "released." + break + fi + if [ ! "${HELD_BY}" = "$(cat $LOGDIR/lock/lock.global)" ]; then + HELD_BY="$(cat $LOGDIR/lock/lock.global)" + echo + echo -n "Waiting for global lock release (held by ${HELD_BY})... " + fi + done + fi + echo -n "Working on $buildscript... " + if [ -r $OUTPUT_LOCATION/$(PRINT_PACKAGE_NAME=foo $buildscript | head -n 1) -a $FORCE_BUILD = no ]; then + echo "skipping because built package(s) were found." + continue + fi + # Use flock to only allow one instance of this script to work on a given + # SlackBuild script at a time. If the SlackBuild is already locked, we'll + # just move on to the next one. Yes, you can run more than one copy of this + # script at the same time to speed things up! + # + # See if we need a global lock. Some SlackBuilds are disruptive and other + # builds should not take place until they have completed. For example, perl + # removes itself from the system during the build. Assume that we need a + # global lock for any package that uses removepkg, upgradepkg, slacktrack, + # or trackbuild. Also, you may add the identifier REQUIRE_GLOBAL_LOCK + # anywhere in a SlackBuild script to make it require the global lock. + HAVE_GLOBAL_LOCK=false + if grep -q -e removepkg -e upgradepkg -e slacktrack -e trackbuild -e REQUIRE_GLOBAL_LOCK $(dirname $(echo $buildscript | cut -f 1 -d ' '))/$(basename $(echo $buildscript | cut -f 1 -d ' ')) ; then + # pkgtools, x11, and KDE all trigger the detection above, but none of them + # really need the global lock. So only request the lock if the build + # script is not one of those. + if ! echo "$(basename $(echo $buildscript | cut -f 1 -d ' '))" | grep -q -x -e pkgtools.SlackBuild -e x11.SlackBuild -e kde.SlackBuild ; then + HAVE_GLOBAL_LOCK=true + fi + fi + if [ "$HAVE_GLOBAL_LOCK" = "true" ]; then + ( flock 9 || exit 11 + echo $(basename $(echo $buildscript | cut -f 1 -d ' ')) >> $LOGDIR/lock/lock.global + do_build + ) 9> $LOGDIR/lock/lock.global + # Remove lock file: + rm -f $LOGDIR/lock/lock.global + else + ( flock -n 9 || exit 11 + do_build + ) 9> $LOGDIR/lock/$(basename $(echo $buildscript | cut -f 1 -d ' ')).lock + if [ $? = 11 ]; then + echo "skipping (locked by another make_world.sh instance)." + continue + fi + # Remove lock file: + rm -f $LOGDIR/lock/$(basename $(echo $buildscript | cut -f 1 -d ' ')).lock + fi + done + if [ "$REPEAT" = "no" ]; then + break + else + # Figure out if we skipped everything and exit REPEAT mode if we did: + cat $BUILDLIST | grep -v "^$" | grep -v "^#" | sort | uniq | cut -f 1 -d ' ' | rev | cut -f 1 -d / | rev > $LOGDIR/tmp-pkgs-to-build.$$ + /bin/ls $LOGDIR/*.log | rev | cut -f 2,3 -d . | cut -f 1 -d / | rev > $LOGDIR/tmp-pkgs-built-or-building.$$ + NUMTOTAL="$(cat $LOGDIR/tmp-pkgs-to-build.$$ | wc -l)" + NUMBUILT="$(grep -x -f $LOGDIR/tmp-pkgs-built-or-building.$$ $LOGDIR/tmp-pkgs-to-build.$$ | wc -l)" + rm -f $LOGDIR/tmp-pkgs-to-build.$$ $LOGDIR/tmp-pkgs-built-or-building.$$ + if [ "$NUMTOTAL" = "$NUMBUILT" ]; then + echo "All packages have been built ($NUMBUILT/$NUMTOTAL). Exiting." + break + else + echo "Repeating BUILDLIST since some packages are not built yet ($NUMBUILT/$NUMTOTAL complete)." + fi + fi +done diff --git a/testing/source/PAM/source b/testing/source/PAM/source new file mode 120000 index 00000000..03cc5a68 --- /dev/null +++ b/testing/source/PAM/source @@ -0,0 +1 @@ +../../../source
\ No newline at end of file diff --git a/testing/source/binutils/binutils.SlackBuild b/testing/source/binutils/binutils.SlackBuild deleted file mode 100755 index d50e5cb0..00000000 --- a/testing/source/binutils/binutils.SlackBuild +++ /dev/null @@ -1,247 +0,0 @@ -#!/bin/bash - -# Copyright 2005-2018 Patrick J. Volkerding, Sebeka, Minnesota, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Modified 2011 by Eric Hameleers <alien at slackware.com> for ARM port. - -cd $(dirname $0) ; CWD=$(pwd) - -PKGNAM=binutils -VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} -BUILD=${BUILD:-1} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i586 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -# If the variable PRINT_PACKAGE_NAME is set, then this script will report what -# the name of the created package would be, and then exit. This information -# could be useful to other scripts. -if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then - echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" - exit 0 -fi - -NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} - -# Set to ld.gold or ld.bfd: -DEFAULT_LD=ld.bfd - -if [ "$ARCH" = "i586" ]; then - SLKCFLAGS="-O2 -march=i586 -mtune=i686" - # The config option below is currently needed to compile on x86: - WERROR="--enable-werror=no" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - # The config option below is currently needed to compile on x86: - WERROR="--enable-werror=no" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - -TMP=${TMP:-/tmp} -PKG=$TMP/package-binutils - -rm -rf $PKG -mkdir -p $TMP $PKG - -cd $TMP -rm -rf binutils-$VERSION -tar xvf $CWD/binutils-$VERSION.tar.?z || exit 1 -cd binutils-$VERSION || exit 1 - -# Various upstream patches: -zcat $CWD/patches/binutils-2.20.51.0.2-libtool-lib64.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/binutils-2.25-version.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/binutils-2.25-set-long-long.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/binutils-2.20.51.0.10-copy-osabi.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/binutils-2.20.51.0.10-sec-merge-emit.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/binutils-2.24-ldforcele.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/binutils-2.25.1-cleansweep.patch.gz | patch -p2 --verbose || exit 1 - -# Export the demangle.h header file: -zcat $CWD/patches/binutils.export.demangle.h.diff.gz | patch -p1 --verbose || exit 1 -# Don't check to see if "config.h" was included in the installed headers: -zcat $CWD/patches/binutils.no-config-h-check.diff.gz | patch -p1 --verbose || exit 1 - -# Set %version to something halfway meaningful: -sed -i -e 's/%''{release}/slack15/g' bfd/Makefile{.am,.in} - -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \+ -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \+ - -# End of preparations -if echo "$*" | grep -qw -- --prep ; then - exit 0 -fi - -# Build for an x86 glibc2-based Linux system: -CFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --mandir=/usr/man \ - --infodir=/usr/info \ - --with-docdir=/usr/doc/binutils-$VERSION \ - --disable-compressed-debug-sections \ - --enable-shared \ - --enable-multilib \ - --enable-64-bit-bfd \ - --enable-plugins \ - --enable-threads \ - --enable-targets=i386-efi-pe,${TARGET} \ - --enable-install-libiberty \ - --enable-gold=yes \ - --enable-ld=default \ - --enable-initfini-array \ - $WERROR \ - --build=$TARGET \ - || exit 1 - -# Use "tooldir=/usr" to avoid internal references to the /usr/${TARGET}/ -# directory. While binutils won't actually use that directory after this, -# we'll still create it since some people have made local use of it. -# Note that this will place ldscripts in /usr/lib, even on $ARCH that -# use LIBDIRSUFFIX=64. According to Ian Lance Taylor, the ldscripts have -# been built into the linker for quite some time and the ones in the -# filesystem aren't actually loaded. For the most part they are now -# documentation and it doesn't matter where they reside. -make clean || exit 1 -make tooldir=/usr $NUMJOBS || make tooldir=/usr || exit 1 -make tooldir=/usr install DESTDIR=$PKG || exit 1 - -# Using tooldir=/usr also makes the /usr/${TARGET}/lib${LIBDIRSUFFIX} -# directory obsolete, and the build will no longer install it. But since -# some people might be making local use of that directory, we'll install -# it anyway: -mkdir -p $PKG/usr/${TARGET}/lib${LIBDIRSUFFIX} -# Same with /usr/${TARGET}/bin: -mkdir -p $PKG/usr/${TARGET}/bin - -# Don't ship .la files: -rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la - -# COMMENTED OUT, since a valid use case was provided for windres on Linux. -# None of these tools are very large, and unless they can be shown to be -# non-functional, there's no good reason to exclude them. -## Remove Windows specific tools / docs (if they exist): -#rm -f $PKG/usr/bin/{dlltool,nlmconv,windres,windmc} -#rm -f $PKG/usr/man/man1/{dlltool,nlmconv,windres,windmc}* - -# Add a symlink since binutils's version of strings used to be called -# "strings-GNU" on Slackware, and it's possible that people have scripts -# that use that name: -( cd $PKG/usr/bin ; ln -sf strings strings-GNU ) - -## OBSOLETE, since we're using tooldir=/usr. But we'll keep this cruft as a -## reference until we get the all clear on the tooldir= changes. :-) -## Move ldscripts to /usr/lib${LIBDIRSUFFIX}, and then put symlinks in place -#mv $PKG/usr/${TARGET}/lib/ldscripts $PKG/usr/lib${LIBDIRSUFFIX} -#( cd $PKG/usr/${TARGET} -# ln -s /usr/lib${LIBDIRSUFFIX}/ldscripts lib/ldscripts -# for FILE in ar as ld ld.bfd ld.gold nm objcopy objdump ranlib strip ; do -# if [ -r "/usr/bin/$FILE" ]; then -# rm -f bin/$FILE -# ln -s /usr/bin/$FILE bin/$FILE -# fi -# done -#) - -# If the requested default linker is present, make it the default: -# Set the link differently on the system to change the default at runtime. -if [ -r $PKG/usr/bin/$DEFAULT_LD ]; then - ( cd $PKG/usr/bin ; rm -f ld ; ln -sf $DEFAULT_LD ld ) -fi - -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# Remove some unneeded man pages, and then compress the rest -rm -f $PKG/usr/man/man1/{dlltool,windres}.1 -( cd $PKG/usr/man - find . -type f -exec gzip -9 {} \+ - for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done -) - -# Compress info pages -rm -f $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* - -mkdir -p $PKG/usr/doc/binutils-$VERSION -cp \ - $CWD/release.binutils-* \ - COPYING* ChangeLog.linux MAI* README* \ - $PKG/usr/doc/binutils-$VERSION - -# If there's a ChangeLog, installing at least part of the recent history -# is useful, but don't let it get totally out of control: -if [ -r ChangeLog ]; then - DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) - cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog - touch -r ChangeLog $DOCSDIR/ChangeLog -fi - -chown -R root:root $PKG/usr/doc/binutils-$VERSION - -# Add slack-desc: -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/binutils-$VERSION-$ARCH-$BUILD.txz - -cat << EOF - -############################# -oprofile links to libbfd so -be sure to recompile that -############################# - -EOF diff --git a/testing/source/binutils/patches/binutils-2.20.51.0.10-copy-osabi.patch b/testing/source/binutils/patches/binutils-2.20.51.0.10-copy-osabi.patch deleted file mode 100644 index 6bd9f3df..00000000 --- a/testing/source/binutils/patches/binutils-2.20.51.0.10-copy-osabi.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- binutils-2.26.orig/bfd/elf.c 2016-01-25 10:11:33.482288877 +0000 -+++ binutils-2.26/bfd/elf.c 2016-01-25 10:16:48.520223863 +0000 -@@ -1300,6 +1300,13 @@ _bfd_elf_copy_private_bfd_data (bfd *ibf - } - } - -+ /* If the input BFD has the OSABI field set and the -+ output BFD does not, then copy the value. */ -+ if (elf_elfheader (ibfd)->e_ident [EI_OSABI] != ELFOSABI_NONE -+ && elf_elfheader (obfd)->e_ident [EI_OSABI] == ELFOSABI_NONE) -+ elf_elfheader (obfd)->e_ident [EI_OSABI] = -+ elf_elfheader (ibfd)->e_ident [EI_OSABI]; -+ - return TRUE; - } - diff --git a/testing/source/binutils/patches/binutils-2.20.51.0.10-sec-merge-emit.patch b/testing/source/binutils/patches/binutils-2.20.51.0.10-sec-merge-emit.patch deleted file mode 100644 index 238beb38..00000000 --- a/testing/source/binutils/patches/binutils-2.20.51.0.10-sec-merge-emit.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- binutils-2.26.orig/bfd/merge.c 2016-01-25 10:11:33.505289018 +0000 -+++ binutils-2.26/bfd/merge.c 2016-01-25 10:19:56.961381656 +0000 -@@ -334,7 +334,7 @@ sec_merge_emit (bfd *abfd, struct sec_me - - /* Trailing alignment needed? */ - off = sec->size - off; -- if (off != 0) -+ if (off != 0 && alignment_power) - { - if (contents) - memcpy (contents + offset, pad, off); diff --git a/testing/source/binutils/patches/binutils-2.20.51.0.2-libtool-lib64.patch b/testing/source/binutils/patches/binutils-2.20.51.0.2-libtool-lib64.patch deleted file mode 100644 index 142fc7e2..00000000 --- a/testing/source/binutils/patches/binutils-2.20.51.0.2-libtool-lib64.patch +++ /dev/null @@ -1,236 +0,0 @@ -diff -rcp ../binutils-2.20.51.0.7.original/bfd/configure ./bfd/configure ---- a/bfd/configure 2010-04-08 14:53:48.000000000 +0100 -+++ b/bfd/configure 2010-04-08 14:56:50.000000000 +0100 -@@ -10762,10 +10762,34 @@ - # before this can be enabled. - hardcode_into_libs=yes - -+ # find out which ABI we are using -+ libsuff= -+ case "$host_cpu" in -+ x86_64*|s390*|powerpc*|ppc*|sparc*) -+ echo 'int i;' > conftest.$ac_ext -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *64-bit*) -+ libsuff=64 -+ if test x"$sys_lib_search_path_spec" = x"/lib /usr/lib /usr/local/lib"; then -+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -+ fi -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ esac -+ - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on -diff -rcp ../binutils-2.20.51.0.7.original/binutils/configure ./binutils/configure ---- a/binutils/configure 2010-04-08 14:53:45.000000000 +0100 -+++ b/binutils/configure 2010-04-08 14:56:21.000000000 +0100 -@@ -10560,10 +10560,34 @@ - # before this can be enabled. - hardcode_into_libs=yes - -+ # find out which ABI we are using -+ libsuff= -+ case "$host_cpu" in -+ x86_64*|s390*|powerpc*|ppc*|sparc*) -+ echo 'int i;' > conftest.$ac_ext -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *64-bit*) -+ libsuff=64 -+ if test x"$sys_lib_search_path_spec" = x"/lib /usr/lib /usr/local/lib"; then -+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -+ fi -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ esac -+ - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on -diff -rcp ../binutils-2.20.51.0.7.original/gas/configure ./gas/configure ---- a/gas/configure 2010-04-08 14:53:47.000000000 +0100 -+++ b/gas/configure 2010-04-08 14:57:24.000000000 +0100 -@@ -10547,10 +10547,34 @@ - # before this can be enabled. - hardcode_into_libs=yes - -+ # find out which ABI we are using -+ libsuff= -+ case "$host_cpu" in -+ x86_64*|s390*|powerpc*|ppc*|sparc*) -+ echo 'int i;' > conftest.$ac_ext -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *64-bit*) -+ libsuff=64 -+ if test x"$sys_lib_search_path_spec" = x"/lib /usr/lib /usr/local/lib"; then -+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -+ fi -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ esac -+ - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on -diff -rcp ../binutils-2.20.51.0.7.original/gprof/configure ./gprof/configure ---- a/gprof/configure 2010-04-08 14:53:45.000000000 +0100 -+++ b/gprof/configure 2010-04-08 14:57:50.000000000 +0100 -@@ -10485,10 +10485,34 @@ - # before this can be enabled. - hardcode_into_libs=yes - -+ # find out which ABI we are using -+ libsuff= -+ case "$host_cpu" in -+ x86_64*|s390*|powerpc*|ppc*|sparc*) -+ echo 'int i;' > conftest.$ac_ext -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *64-bit*) -+ libsuff=64 -+ if test x"$sys_lib_search_path_spec" = x"/lib /usr/lib /usr/local/lib"; then -+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -+ fi -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ esac -+ - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on -diff -rcp ../binutils-2.20.51.0.7.original/ld/configure ./ld/configure ---- a/ld/configure 2010-04-08 14:53:44.000000000 +0100 -+++ b/ld/configure 2010-04-08 14:58:21.000000000 +0100 -@@ -10966,10 +10966,34 @@ - # before this can be enabled. - hardcode_into_libs=yes - -+ # find out which ABI we are using -+ libsuff= -+ case "$host_cpu" in -+ x86_64*|s390*|powerpc*|ppc*|sparc*) -+ echo 'int i;' > conftest.$ac_ext -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *64-bit*) -+ libsuff=64 -+ if test x"$sys_lib_search_path_spec" = x"/lib /usr/lib /usr/local/lib"; then -+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -+ fi -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ esac -+ - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on -Only in .: .#libtool.m4 -Only in .: #libtool.m4# -diff -rcp ../binutils-2.20.51.0.7.original/opcodes/configure ./opcodes/configure ---- a/opcodes/configure 2010-04-08 14:53:45.000000000 +0100 -+++ b/opcodes/configure 2010-04-08 14:59:10.000000000 +0100 -@@ -10496,10 +10496,34 @@ - # before this can be enabled. - hardcode_into_libs=yes - -+ # find out which ABI we are using -+ libsuff= -+ case "$host_cpu" in -+ x86_64*|s390*|powerpc*|ppc*|sparc*) -+ echo 'int i;' > conftest.$ac_ext -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *64-bit*) -+ libsuff=64 -+ if test x"$sys_lib_search_path_spec" = x"/lib /usr/lib /usr/local/lib"; then -+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -+ fi -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ esac -+ - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on diff --git a/testing/source/binutils/patches/binutils-2.24-ldforcele.patch b/testing/source/binutils/patches/binutils-2.24-ldforcele.patch deleted file mode 100644 index 194cf1ea..00000000 --- a/testing/source/binutils/patches/binutils-2.24-ldforcele.patch +++ /dev/null @@ -1,54 +0,0 @@ -Common subdirectories: ../binutils-2.24.orig/ld/emulparams and ld/emulparams -Common subdirectories: ../binutils-2.24.orig/ld/emultempl and ld/emultempl -diff -up ../binutils-2.24.orig/ld/ldlang.c ld/ldlang.c ---- a/ld/ldlang.c 2014-05-09 10:35:04.589504928 +0100 -+++ b/ld/ldlang.c 2014-05-09 10:35:55.515661478 +0100 -@@ -7096,6 +7096,18 @@ - && little != NULL) - format = little; - -+ if (getenv ("LD_FORCE_LE") != NULL) -+ { -+ if (strcmp (format, "elf64-powerpc") == 0) -+ format = "elf64-powerpcle"; -+ else if (strcmp (format, "elf32-powerpc") == 0) -+ format = "elf32-powerpcle"; -+ else if (strcmp (format, "elf64-big") == 0) -+ format = "elf64-little"; -+ else if (strcmp (format, "elf32-big") == 0) -+ format = "elf32-little"; -+ } -+ - output_target = format; - } - } -Only in ld: ldlang.c.orig -diff -up ../binutils-2.24.orig/ld/ldmain.c ld/ldmain.c ---- a/ld/ldmain.c 2014-05-09 10:35:04.593504941 +0100 -+++ b/ld/ldmain.c 2014-05-09 10:35:55.515661478 +0100 -@@ -603,6 +603,18 @@ - } - } - -+ if ((strncmp (emulation, "elf64ppc", 8) == 0 -+ || strncmp (emulation, "elf32ppc", 8) == 0) -+ && getenv ("LD_FORCE_LE") != NULL) -+ { -+ size_t len = strlen (emulation); -+ char *le = xmalloc (len + 2); -+ memcpy (le, emulation, 5); -+ le[5] = 'l'; -+ memcpy (le + 6, emulation + 5, len - 4); -+ emulation = le; -+ } -+ - return emulation; - } - -Only in ld: ldmain.c.orig -Common subdirectories: ../binutils-2.24.orig/ld/ldscripts and ld/ldscripts -Common subdirectories: ../binutils-2.24.orig/ld/.libs and ld/.libs -Common subdirectories: ../binutils-2.24.orig/ld/po and ld/po -Common subdirectories: ../binutils-2.24.orig/ld/scripttempl and ld/scripttempl -Common subdirectories: ../binutils-2.24.orig/ld/testsuite and ld/testsuite -Common subdirectories: ../binutils-2.24.orig/ld/tmpdir and ld/tmpdir diff --git a/testing/source/binutils/patches/binutils-2.25-set-long-long.patch b/testing/source/binutils/patches/binutils-2.25-set-long-long.patch deleted file mode 100644 index 1ea74181..00000000 --- a/testing/source/binutils/patches/binutils-2.25-set-long-long.patch +++ /dev/null @@ -1,38 +0,0 @@ -diff -up binutils-2.25.orig/bfd/configure.ac binutils-2.25/bfd/configure.ac ---- binutils-2.25.orig/bfd/configure.ac 2014-12-24 10:34:45.590491143 +0000 -+++ binutils-2.25/bfd/configure.ac 2014-12-24 10:36:12.997981992 +0000 -@@ -183,11 +183,13 @@ if test "x${ac_cv_sizeof_long}" = "x8"; - BFD_HOST_64BIT_LONG=1 - test -n "${HOST_64BIT_TYPE}" || HOST_64BIT_TYPE="long" - test -n "${HOST_U_64BIT_TYPE}" || HOST_U_64BIT_TYPE="unsigned long" --elif test "x${ac_cv_sizeof_long_long}" = "x8"; then -+fi -+if test "x${ac_cv_sizeof_long_long}" = "x8"; then - BFD_HOST_64BIT_LONG_LONG=1 - test -n "${HOST_64BIT_TYPE}" || HOST_64BIT_TYPE="long long" - test -n "${HOST_U_64BIT_TYPE}" || HOST_U_64BIT_TYPE="unsigned long long" -- if test "x${ac_cv_sizeof_void_p}" = "x8"; then -+ if test "x${ac_cv_sizeof_void_p}" = "x8" \ -+ -a "x${ac_cv_sizeof_long}" != "x8"; then - BFD_HOSTPTR_T="unsigned long long" - fi - fi -diff -up ../binutils-2.20.51.0.7.original/bfd/configure ./bfd/configure ---- a/bfd/configure 2010-04-08 15:23:58.000000000 +0100 -+++ b/bfd/configure 2010-04-08 15:24:06.000000000 +0100 -@@ -12819,11 +12819,13 @@ - BFD_HOST_64BIT_LONG=1 - test -n "${HOST_64BIT_TYPE}" || HOST_64BIT_TYPE="long" - test -n "${HOST_U_64BIT_TYPE}" || HOST_U_64BIT_TYPE="unsigned long" --elif test "x${ac_cv_sizeof_long_long}" = "x8"; then -+fi -+if test "x${ac_cv_sizeof_long_long}" = "x8"; then - BFD_HOST_64BIT_LONG_LONG=1 - test -n "${HOST_64BIT_TYPE}" || HOST_64BIT_TYPE="long long" - test -n "${HOST_U_64BIT_TYPE}" || HOST_U_64BIT_TYPE="unsigned long long" -- if test "x${ac_cv_sizeof_void_p}" = "x8"; then -+ if test "x${ac_cv_sizeof_void_p}" = "x8" \ -+ -a "x${ac_cv_sizeof_long}" != "x8"; then - BFD_HOSTPTR_T="unsigned long long" - fi - fi diff --git a/testing/source/binutils/patches/binutils-2.25-version.patch b/testing/source/binutils/patches/binutils-2.25-version.patch deleted file mode 100644 index d97e81bc..00000000 --- a/testing/source/binutils/patches/binutils-2.25-version.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- binutils-2.26.orig/bfd/Makefile.am 2016-01-25 10:11:33.505289018 +0000 -+++ binutils-2.26/bfd/Makefile.am 2016-01-25 10:13:23.489964145 +0000 -@@ -1043,8 +1043,8 @@ DISTCLEANFILES = $(BUILD_CFILES) $(BUILD - bfdver.h: $(srcdir)/version.h $(srcdir)/development.sh $(srcdir)/Makefile.in - @echo "creating $@" - @bfd_version=`echo "$(VERSION)" | $(SED) -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\ -- bfd_version_string="\"$(VERSION)\"" ;\ -- bfd_soversion="$(VERSION)" ;\ -+ bfd_version_string="\"$(VERSION)-%{release}\"" ;\ -+ bfd_soversion="$(VERSION)-%{release}" ;\ - bfd_version_package="\"$(PKGVERSION)\"" ;\ - report_bugs_to="\"$(REPORT_BUGS_TO)\"" ;\ - . $(srcdir)/development.sh ;\ -@@ -1055,7 +1055,7 @@ bfdver.h: $(srcdir)/version.h $(srcdir)/ - fi ;\ - $(SED) -e "s,@bfd_version@,$$bfd_version," \ - -e "s,@bfd_version_string@,$$bfd_version_string," \ -- -e "s,@bfd_version_package@,$$bfd_version_package," \ -+ -e "s,@bfd_version_package@,\"version \"," \ - -e "s,@report_bugs_to@,$$report_bugs_to," \ - < $(srcdir)/version.h > $@; \ - echo "$${bfd_soversion}" > libtool-soversion ---- binutils-2.26.orig/bfd/Makefile.in 2016-01-25 10:11:33.505289018 +0000 -+++ binutils-2.26/bfd/Makefile.in 2016-01-25 10:14:17.818297941 +0000 -@@ -2111,8 +2111,8 @@ stmp-lcoff-h: $(LIBCOFF_H_FILES) - bfdver.h: $(srcdir)/version.h $(srcdir)/development.sh $(srcdir)/Makefile.in - @echo "creating $@" - @bfd_version=`echo "$(VERSION)" | $(SED) -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\ -- bfd_version_string="\"$(VERSION)\"" ;\ -- bfd_soversion="$(VERSION)" ;\ -+ bfd_version_string="\"$(VERSION)-%{release}\"" ;\ -+ bfd_soversion="$(VERSION)-%{release}" ;\ - bfd_version_package="\"$(PKGVERSION)\"" ;\ - report_bugs_to="\"$(REPORT_BUGS_TO)\"" ;\ - . $(srcdir)/development.sh ;\ -@@ -2123,7 +2123,7 @@ bfdver.h: $(srcdir)/version.h $(srcdir)/ - fi ;\ - $(SED) -e "s,@bfd_version@,$$bfd_version," \ - -e "s,@bfd_version_string@,$$bfd_version_string," \ -- -e "s,@bfd_version_package@,$$bfd_version_package," \ -+ -e "s,@bfd_version_package@,\"version \"," \ - -e "s,@report_bugs_to@,$$report_bugs_to," \ - < $(srcdir)/version.h > $@; \ - echo "$${bfd_soversion}" > libtool-soversion diff --git a/testing/source/binutils/patches/binutils-2.25.1-cleansweep.patch b/testing/source/binutils/patches/binutils-2.25.1-cleansweep.patch deleted file mode 100644 index 2603d130..00000000 --- a/testing/source/binutils/patches/binutils-2.25.1-cleansweep.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- ../binutils-2.25.1.orig/ld/testsuite/ld-plugin/lto.exp 2016-01-08 15:24:58.241083264 +0000 -+++ ld/testsuite/ld-plugin/lto.exp 2016-01-08 16:30:51.845827089 +0000 -@@ -386,6 +386,11 @@ if { [at_least_gcc_version 4 7] } { - } - } - -+# Fedora specific binutils patches break some of the tests that follow... -+restore_notify -+return -+ -+ - # Run "ld -r" to generate inputs for complex LTO tests. - run_dump_test "lto-3r" - remote_exec host "mv" "tmpdir/dump tmpdir/lto-3.o" ---- ../binutils-2.26.orig/ld/testsuite/ld-size/size.exp 2016-01-27 15:51:27.223093570 +0000 -+++ ld/testsuite/ld-size/size.exp 2016-01-27 16:00:04.262015016 +0000 -@@ -113,37 +113,6 @@ run_cc_link_tests [list \ - "libsize-6b.so" \ - ] \ - [list \ -- "Build libsize-7.so" \ -- "-shared" \ -- "-fPIC" \ -- {size-7b.c} \ -- {} \ -- "libsize-7.so" \ -- ] \ -- [list \ -- "Build size-7" \ -- "$NOPIE_LDFLAGS -Wl,--no-as-needed tmpdir/libsize-7.so" \ -- "$NOPIE_CFLAGS" \ -- {size-7a.c} \ -- {{readelf -rW size-7.rd}} \ -- "size-7.exe" \ -- ] \ -- [list \ -- "Build libsize-8.so" \ -- "-shared" "-fPIC" \ -- {size-8b.c} \ -- {} \ -- "libsize-8.so" \ -- ] \ -- [list \ -- "Build size-8" \ -- "$NOPIE_LDFLAGS -Wl,--no-as-needed tmpdir/libsize-8.so" \ -- "$NOPIE_CFLAGS" \ -- {size-8a.c} \ -- {{readelf -rW size-8.rd}} \ -- "size-8.exe" \ -- ] \ -- [list \ - "Build libsize-9.so" \ - "-shared" \ - "-fPIC" \ -@@ -161,6 +130,8 @@ run_cc_link_tests [list \ - ] \ - ] - -+return -+ - # Check if size relocation works at run-time. - catch "exec tmpdir/size-7.exe > tmpdir/dump.out" exec_output - if ![string match "" $exec_output] then { diff --git a/testing/source/binutils/patches/binutils.export.demangle.h.diff b/testing/source/binutils/patches/binutils.export.demangle.h.diff deleted file mode 100644 index 8720da59..00000000 --- a/testing/source/binutils/patches/binutils.export.demangle.h.diff +++ /dev/null @@ -1,30 +0,0 @@ ---- ./bfd/Makefile.in.orig 2019-02-02 09:47:56.000000000 -0600 -+++ ./bfd/Makefile.in 2019-02-02 14:10:55.709944225 -0600 -@@ -249,7 +249,7 @@ - esac - am__bfdinclude_HEADERS_DIST = $(INCDIR)/plugin-api.h bfd.h \ - $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h bfd_stdint.h \ -- $(INCDIR)/diagnostics.h $(INCDIR)/bfdlink.h -+ $(INCDIR)/diagnostics.h $(INCDIR)/bfdlink.h $(INCDIR)/demangle.h - HEADERS = $(bfdinclude_HEADERS) - RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -@@ -469,6 +469,7 @@ - @INSTALL_LIBBFD_TRUE@bfdinclude_HEADERS = $(BFD_H) \ - @INSTALL_LIBBFD_TRUE@ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h \ - @INSTALL_LIBBFD_TRUE@ bfd_stdint.h $(INCDIR)/diagnostics.h \ -+@INSTALL_LIBBFD_TRUE@ $(INCDIR)/demangle.h \ - @INSTALL_LIBBFD_TRUE@ $(INCDIR)/bfdlink.h $(am__append_2) - @INSTALL_LIBBFD_FALSE@rpath_bfdlibdir = @bfdlibdir@ - @INSTALL_LIBBFD_FALSE@noinst_LTLIBRARIES = libbfd.la ---- ./bfd/Makefile.am.orig 2019-01-19 10:01:32.000000000 -0600 -+++ ./bfd/Makefile.am 2019-02-02 14:09:28.363952384 -0600 -@@ -33,7 +33,7 @@ - bfdincludedir = @bfdincludedir@ - bfdlib_LTLIBRARIES = libbfd.la - bfdinclude_HEADERS = $(BFD_H) $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h \ -- bfd_stdint.h $(INCDIR)/diagnostics.h $(INCDIR)/bfdlink.h -+ bfd_stdint.h $(INCDIR)/diagnostics.h $(INCDIR)/bfdlink.h $(INCDIR)/demangle.h - else !INSTALL_LIBBFD - # Empty these so that the respective installation directories will not be created. - bfdlibdir = diff --git a/testing/source/binutils/patches/binutils.no-config-h-check.diff b/testing/source/binutils/patches/binutils.no-config-h-check.diff deleted file mode 100644 index 55cba7fb..00000000 --- a/testing/source/binutils/patches/binutils.no-config-h-check.diff +++ /dev/null @@ -1,28 +0,0 @@ ---- ./bfd/bfd-in2.h.orig 2013-02-27 14:28:03.000000000 -0600 -+++ ./bfd/bfd-in2.h 2013-04-02 15:57:44.847202021 -0500 -@@ -32,11 +32,6 @@ - #ifndef __BFD_H_SEEN__ - #define __BFD_H_SEEN__ - --/* PR 14072: Ensure that config.h is included first. */ --#if !defined PACKAGE && !defined PACKAGE_VERSION --#error config.h must be included before this header --#endif -- - #ifdef __cplusplus - extern "C" { - #endif ---- ./bfd/bfd-in.h.orig 2013-02-27 14:28:03.000000000 -0600 -+++ ./bfd/bfd-in.h 2013-04-02 15:57:44.846202021 -0500 -@@ -25,11 +25,6 @@ - #ifndef __BFD_H_SEEN__ - #define __BFD_H_SEEN__ - --/* PR 14072: Ensure that config.h is included first. */ --#if !defined PACKAGE && !defined PACKAGE_VERSION --#error config.h must be included before this header --#endif -- - #ifdef __cplusplus - extern "C" { - #endif diff --git a/testing/source/glibc/doinst.sh-glibc b/testing/source/glibc/doinst.sh-glibc deleted file mode 100644 index e2c7d3ef..00000000 --- a/testing/source/glibc/doinst.sh-glibc +++ /dev/null @@ -1,164 +0,0 @@ -#!/bin/sh -# Copyright (C) 2002, 2005 Slackware Linux, Inc. -# Copyright 2005, 2006, 2007, 2011, 2012, 2018 Patrick J. Volkerding, Sebeka, Minnesota, USA -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# as published by the Free Software Foundation; either version 2 -# of the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# Swap glibc on the fly. -# -# If we're on a running system we have to handle this _very_ carefully. :-) -# The tricks involved here get trickier every time... - -# OK, now we have to be sure of a few things. First, you do have a 2.6 -# kernel running, right? - -if [ -r /proc/ksyms ]; then - echo "FATAL: you need to be running a 2.6.x kernel in order to upgrade" - echo "to this version of glibc." - echo - sleep 999 - exit 1 -fi - -# Next, stop using the /lib/ntpl libraries. These are now obsolete and -# will break the installation if present: -if [ -d lib/tls ]; then - mkdir -p lib/obsolete - mv lib/tls lib/obsolete -fi -if [ -x sbin/ldconfig ]; then - sbin/ldconfig -r . 2> /dev/null -fi - -# Install NPTL glibc libraries: -if [ -x /sbin/ldconfig -a -d lib/incoming ]; then # swap on the fly - # Try to protect with flock against another installpkg/removepkg running - # ldconfig while we're doing the on-the-fly install: - mkdir -p run/lock/pkgtools - ( flock 9 || exit 11 - # First create copies of the incoming libraries: - ( cd lib/incoming - for file in * ; do - if [ ! -r ../${file}.incoming ]; then - cp -a $file ../${file}.incoming - fi - done - ) - # Then switch to them all at once: - /sbin/ldconfig -l lib/*.incoming 2> /dev/null - # Remove old versions of the glibc libraries. If you really don't want to - # do this for some reason, create a file /etc/glibc-nowipe. - if [ ! -r etc/glibc-nowipe ]; then - ( cd lib - for INCOMING in incoming/*-* ; do - LIBPREFIX=$(basename $INCOMING | cut -f 1 -d -) - for LIBRARY in ${LIBPREFIX}-* ; do - # Don't remove the library if it ends in .incoming: - if [ "$(echo $LIBRARY | rev | cut -f 1 -d .)" = "gnimocni" ]; then - continue - fi - # Don't remove symlinks: - if [ -L $LIBRARY ]; then - continue - fi - rm -f $LIBRARY - done - done - ) - fi - # Finally, rename them and clean up: - ( cd lib - for file in *.incoming ; do - rm -f `basename $file .incoming` - cp -a $file `basename $file .incoming` - /sbin/ldconfig -l `basename $file .incoming` 2> /dev/null - rm -f $file - done - ) - ) 9> run/lock/pkgtools/ldconfig.lock -else # no ldconfig? This is a broken situation, but we will do what we can: - ( cd lib/incoming - for file in * ; do - cp -a $file .. - done - ) -fi -# Now, get rid of the temporary directory: -rm -rf lib/incoming -# Done installing NPTL glibc libraries. - -# Handle config files: -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} -config etc/nscd.conf.new -config etc/profile.d/glibc.csh.new -config etc/profile.d/glibc.sh.new -# Clearly you already decided this issue. :-) -rm -f etc/profile.d/glibc.csh.new -rm -f etc/profile.d/glibc.sh.new - -# This block below *should* be dead code, but it's probably safer to leave it -# here as a fallback. It no longer has complete coverage of all the links -# that would be needed in /lib${LIBDIRSUFFIX}, but it covers enough that if -# we did fall back on this the machine would boot until it reached the boot -# time call to ldconfig, which would then take care of any missing links. -# In case there's no ldconfig, make the links manually: -if [ ! -x /sbin/ldconfig ]; then -( cd lib ; rm -rf libnss_nis.so.2 ) -( cd lib ; ln -sf libnss_nis-@@VERSION@@.so libnss_nis.so.2 ) -( cd lib ; rm -rf libm.so.6 ) -( cd lib ; ln -sf libm-@@VERSION@@.so libm.so.6 ) -( cd lib ; rm -rf libnss_files.so.2 ) -( cd lib ; ln -sf libnss_files-@@VERSION@@.so libnss_files.so.2 ) -( cd lib ; rm -rf libresolv.so.2 ) -( cd lib ; ln -sf libresolv-@@VERSION@@.so libresolv.so.2 ) -( cd lib ; rm -rf libnsl.so.1 ) -( cd lib ; ln -sf libnsl-@@VERSION@@.so libnsl.so.1 ) -( cd lib ; rm -rf libutil.so.1 ) -( cd lib ; ln -sf libutil-@@VERSION@@.so libutil.so.1 ) -( cd lib ; rm -rf libnss_compat.so.2 ) -( cd lib ; ln -sf libnss_compat-@@VERSION@@.so libnss_compat.so.2 ) -( cd lib ; rm -rf libthread_db.so.1 ) -( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 ) -( cd lib ; rm -rf libnss_hesiod.so.2 ) -( cd lib ; ln -sf libnss_hesiod-@@VERSION@@.so libnss_hesiod.so.2 ) -( cd lib ; rm -rf libanl.so.1 ) -( cd lib ; ln -sf libanl-@@VERSION@@.so libanl.so.1 ) -( cd lib ; rm -rf libcrypt.so.1 ) -( cd lib ; ln -sf libcrypt-@@VERSION@@.so libcrypt.so.1 ) -( cd lib ; rm -rf libBrokenLocale.so.1 ) -( cd lib ; ln -sf libBrokenLocale-@@VERSION@@.so libBrokenLocale.so.1 ) -( cd lib ; rm -rf ld-linux.so.2 ) -( cd lib ; ln -sf ld-@@VERSION@@.so ld-linux.so.2 ) -( cd lib ; rm -rf libdl.so.2 ) -( cd lib ; ln -sf libdl-@@VERSION@@.so libdl.so.2 ) -( cd lib ; rm -rf libnss_dns.so.2 ) -( cd lib ; ln -sf libnss_dns-@@VERSION@@.so libnss_dns.so.2 ) -( cd lib ; rm -rf libpthread.so.0 ) -( cd lib ; ln -sf libpthread-@@VERSION@@.so libpthread.so.0 ) -( cd lib ; rm -rf libnss_nisplus.so.2 ) -( cd lib ; ln -sf libnss_nisplus-@@VERSION@@.so libnss_nisplus.so.2 ) -( cd lib ; rm -rf libc.so.6 ) -( cd lib ; ln -sf libc-@@VERSION@@.so libc.so.6 ) -( cd lib ; rm -rf librt.so.1 ) -( cd lib ; ln -sf librt-@@VERSION@@.so librt.so.1 ) -fi - -# More links: diff --git a/testing/source/glibc/doinst.sh-glibc-solibs b/testing/source/glibc/doinst.sh-glibc-solibs deleted file mode 100644 index 3d446604..00000000 --- a/testing/source/glibc/doinst.sh-glibc-solibs +++ /dev/null @@ -1,161 +0,0 @@ -#!/bin/sh -# Copyright (C) 2002, 2005 Slackware Linux, Inc. -# Copyright 2005, 2006, 2011, 2012, 2018 Patrick J. Volkerding, Sebeka, Minnesota, USA -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# as published by the Free Software Foundation; either version 2 -# of the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# Swap glibc on the fly. -# -# If we're on a running system we have to handle this _very_ carefully. :-) -# The tricks involved here get trickier every time... - -# OK, now we have to be sure of a few things. First, you do have a 2.6 -# kernel running, right? - -if [ -r /proc/ksyms ]; then - echo "FATAL: you need to be running a 2.6.x kernel in order to upgrade" - echo "to this version of glibc." - echo - sleep 999 - exit 1 -fi - -# Next, stop using the /lib/ntpl libraries. These are now obsolete and -# will break the installation if present: -if [ -d lib/tls ]; then - mkdir -p lib/obsolete - mv lib/tls lib/obsolete -fi -if [ -x sbin/ldconfig ]; then - sbin/ldconfig -r . 2> /dev/null -fi - -# Install NPTL glibc libraries: -if [ -x /sbin/ldconfig -a -d lib/incoming ]; then # swap on the fly - # Try to protect with flock against another installpkg/removepkg running - # ldconfig while we're doing the on-the-fly install: - mkdir -p run/lock/pkgtools - ( flock 9 || exit 11 - # First create copies of the incoming libraries: - ( cd lib/incoming - for file in * ; do - if [ ! -r ../${file}.incoming ]; then - cp -a $file ../${file}.incoming - fi - done - ) - # Then switch to them all at once: - /sbin/ldconfig -l lib/*.incoming 2> /dev/null - # Remove old versions of the glibc libraries. If you really don't want to - # do this for some reason, create a file /etc/glibc-nowipe. - if [ ! -r etc/glibc-nowipe ]; then - ( cd lib - for INCOMING in incoming/*-* ; do - LIBPREFIX=$(basename $INCOMING | cut -f 1 -d -) - for LIBRARY in ${LIBPREFIX}-* ; do - # Don't remove the library if it ends in .incoming: - if [ "$(echo $LIBRARY | rev | cut -f 1 -d .)" = "gnimocni" ]; then - continue - fi - # Don't remove symlinks: - if [ -L $LIBRARY ]; then - continue - fi - rm -f $LIBRARY - done - done - ) - fi - # Finally, rename them and clean up: - ( cd lib - for file in *.incoming ; do - rm -f `basename $file .incoming` - cp -a $file `basename $file .incoming` - /sbin/ldconfig -l `basename $file .incoming` 2> /dev/null - rm -f $file - done - ) - ) 9> run/lock/pkgtools/ldconfig.lock -else # no ldconfig? This is a broken situation, but we will do what we can: - ( cd lib/incoming - for file in * ; do - cp -a $file .. - done - ) -fi -# Now, get rid of the temporary directory: -rm -rf lib/incoming -# Done installing NPTL glibc libraries. - -# Handle config files: -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} -config etc/profile.d/glibc.csh.new -config etc/profile.d/glibc.sh.new -# Clearly you already decided this issue. :-) -rm -f etc/profile.d/glibc.csh.new -rm -f etc/profile.d/glibc.sh.new - -# This block below *should* be dead code, but it's probably safer to leave it -# here as a fallback. It no longer has complete coverage of all the links -# that would be needed in /lib${LIBDIRSUFFIX}, but it covers enough that if -# we did fall back on this the machine would boot until it reached the boot -# time call to ldconfig, which would then take care of any missing links. -if [ ! -x /sbin/ldconfig ]; then -( cd lib ; rm -rf libnss_nis.so.2 ) -( cd lib ; ln -sf libnss_nis-@@VERSION@@.so libnss_nis.so.2 ) -( cd lib ; rm -rf libm.so.6 ) -( cd lib ; ln -sf libm-@@VERSION@@.so libm.so.6 ) -( cd lib ; rm -rf libnss_files.so.2 ) -( cd lib ; ln -sf libnss_files-@@VERSION@@.so libnss_files.so.2 ) -( cd lib ; rm -rf libresolv.so.2 ) -( cd lib ; ln -sf libresolv-@@VERSION@@.so libresolv.so.2 ) -( cd lib ; rm -rf libnsl.so.1 ) -( cd lib ; ln -sf libnsl-@@VERSION@@.so libnsl.so.1 ) -( cd lib ; rm -rf libutil.so.1 ) -( cd lib ; ln -sf libutil-@@VERSION@@.so libutil.so.1 ) -( cd lib ; rm -rf libnss_compat.so.2 ) -( cd lib ; ln -sf libnss_compat-@@VERSION@@.so libnss_compat.so.2 ) -( cd lib ; rm -rf libthread_db.so.1 ) -( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 ) -( cd lib ; rm -rf libnss_hesiod.so.2 ) -( cd lib ; ln -sf libnss_hesiod-@@VERSION@@.so libnss_hesiod.so.2 ) -( cd lib ; rm -rf libanl.so.1 ) -( cd lib ; ln -sf libanl-@@VERSION@@.so libanl.so.1 ) -( cd lib ; rm -rf libcrypt.so.1 ) -( cd lib ; ln -sf libcrypt-@@VERSION@@.so libcrypt.so.1 ) -( cd lib ; rm -rf libBrokenLocale.so.1 ) -( cd lib ; ln -sf libBrokenLocale-@@VERSION@@.so libBrokenLocale.so.1 ) -( cd lib ; rm -rf ld-linux.so.2 ) -( cd lib ; ln -sf ld-@@VERSION@@.so ld-linux.so.2 ) -( cd lib ; rm -rf libdl.so.2 ) -( cd lib ; ln -sf libdl-@@VERSION@@.so libdl.so.2 ) -( cd lib ; rm -rf libnss_dns.so.2 ) -( cd lib ; ln -sf libnss_dns-@@VERSION@@.so libnss_dns.so.2 ) -( cd lib ; rm -rf libpthread.so.0 ) -( cd lib ; ln -sf libpthread-@@VERSION@@.so libpthread.so.0 ) -( cd lib ; rm -rf libnss_nisplus.so.2 ) -( cd lib ; ln -sf libnss_nisplus-@@VERSION@@.so libnss_nisplus.so.2 ) -( cd lib ; rm -rf libc.so.6 ) -( cd lib ; ln -sf libc-@@VERSION@@.so libc.so.6 ) -( cd lib ; rm -rf librt.so.1 ) -( cd lib ; ln -sf librt-@@VERSION@@.so librt.so.1 ) -fi - diff --git a/testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff b/testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff deleted file mode 100644 index 0a14ca3b..00000000 --- a/testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff +++ /dev/null @@ -1,14 +0,0 @@ ---- ./localedata/locales/en_US.orig 2019-01-31 10:45:36.000000000 -0600 -+++ ./localedata/locales/en_US 2019-01-31 22:35:02.033009166 -0600 -@@ -118,7 +118,10 @@ - t_fmt_ampm "%I:%M:%S %p" - % - % Appropriate date and time representation for date(1) --date_fmt "%a %d %b %Y %r %Z" -+% [ Slackware editor's note - no thank you, US users -+% of UNIX-like systems expect a 24 hour clock, just -+% like users in the vast majority of other locales. ] -+%date_fmt "%a %d %b %Y %r %Z" - % - % Strings for AM/PM - % diff --git a/testing/source/glibc/glibc-c-utf8-locale.patch b/testing/source/glibc/glibc-c-utf8-locale.patch deleted file mode 100644 index 7fabf303..00000000 --- a/testing/source/glibc/glibc-c-utf8-locale.patch +++ /dev/null @@ -1,270 +0,0 @@ -From 2eda7b462b415105f5a05c1323372d4e39d46439 Mon Sep 17 00:00:00 2001 -From: Mike FABIAN <mfabian@redhat.com> -Date: Mon, 10 Aug 2015 15:58:12 +0200 -Subject: [PATCH] Add a C.UTF-8 locale - ---- - localedata/SUPPORTED | 1 + - localedata/locales/C | 238 +++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 239 insertions(+) - create mode 100644 localedata/locales/C - -diff --git a/localedata/SUPPORTED b/localedata/SUPPORTED -index 8ca023e..2a78391 100644 ---- a/localedata/SUPPORTED -+++ b/localedata/SUPPORTED -@@ -1,6 +1,7 @@ - # This file names the currently supported and somewhat tested locales. - # If you have any additions please file a glibc bug report. - SUPPORTED-LOCALES=\ -+C.UTF-8/UTF-8 \ - aa_DJ.UTF-8/UTF-8 \ - aa_DJ/ISO-8859-1 \ - aa_ER/UTF-8 \ -diff --git a/localedata/locales/C b/localedata/locales/C -new file mode 100644 -index 0000000..fdf460e ---- /dev/null -+++ b/localedata/locales/C -@@ -0,0 +1,238 @@ -+escape_char / -+comment_char % -+% Locale for C locale in UTF-8 -+ -+LC_IDENTIFICATION -+title "C locale" -+source "" -+address "" -+contact "" -+email "mfabian@redhat.com" -+tel "" -+fax "" -+language "C" -+territory "" -+revision "1.0" -+date "2015-08-10" -+% -+category "i18n:2012";LC_IDENTIFICATION -+category "i18n:2012";LC_CTYPE -+category "i18n:2012";LC_COLLATE -+category "i18n:2012";LC_TIME -+category "i18n:2012";LC_NUMERIC -+category "i18n:2012";LC_MONETARY -+category "i18n:2012";LC_MESSAGES -+category "i18n:2012";LC_PAPER -+category "i18n:2012";LC_NAME -+category "i18n:2012";LC_ADDRESS -+category "i18n:2012";LC_TELEPHONE -+category "i18n:2012";LC_MEASUREMENT -+END LC_IDENTIFICATION -+ -+LC_CTYPE -+copy "i18n" -+ -+translit_start -+include "translit_combining";"" -+translit_end -+ -+END LC_CTYPE -+ -+LC_COLLATE -+order_start forward -+<U0000> -+.. -+<UFFFF> -+<U10000> -+.. -+<U1FFFF> -+<U20000> -+.. -+<U2FFFF> -+<UE0000> -+.. -+<UEFFFF> -+<UF0000> -+.. -+<UFFFFF> -+<U100000> -+.. -+<U10FFFF> -+UNDEFINED -+order_end -+END LC_COLLATE -+ -+LC_MONETARY -+% This is the 14652 i18n fdcc-set definition for -+% the LC_MONETARY category -+% (except for the int_curr_symbol and currency_symbol, they are empty in -+% the 14652 i18n fdcc-set definition and also empty in -+% glibc/locale/C-monetary.c. But localedef complains in that case). -+% -+% Using "USD" for int_curr_symbol. But maybe "XXX" would be better? -+% XXX is "No currency" (https://en.wikipedia.org/wiki/ISO_4217) -+int_curr_symbol "<U0055><U0053><U0044><U0020>" -+% Using "$" for currency_symbol. But maybe <U00A4> would be better? -+% U+00A4 is the "generic currency symbol" -+% (https://en.wikipedia.org/wiki/Currency_sign_%28typography%29) -+currency_symbol "<U0024>" -+mon_decimal_point "<U002E>" -+mon_thousands_sep "" -+mon_grouping -1 -+positive_sign "" -+negative_sign "<U002D>" -+int_frac_digits -1 -+frac_digits -1 -+p_cs_precedes -1 -+int_p_sep_by_space -1 -+p_sep_by_space -1 -+n_cs_precedes -1 -+int_n_sep_by_space -1 -+n_sep_by_space -1 -+p_sign_posn -1 -+n_sign_posn -1 -+% -+END LC_MONETARY -+ -+LC_NUMERIC -+% This is the POSIX Locale definition for -+% the LC_NUMERIC category. -+% -+decimal_point "<U002E>" -+thousands_sep "" -+grouping -1 -+END LC_NUMERIC -+ -+LC_TIME -+% This is the POSIX Locale definition for -+% the LC_TIME category. -+% -+% Abbreviated weekday names (%a) -+abday "<U0053><U0075><U006E>";"<U004D><U006F><U006E>";/ -+ "<U0054><U0075><U0065>";"<U0057><U0065><U0064>";/ -+ "<U0054><U0068><U0075>";"<U0046><U0072><U0069>";/ -+ "<U0053><U0061><U0074>" -+ -+% Full weekday names (%A) -+day "<U0053><U0075><U006E><U0064><U0061><U0079>";/ -+ "<U004D><U006F><U006E><U0064><U0061><U0079>";/ -+ "<U0054><U0075><U0065><U0073><U0064><U0061><U0079>";/ -+ "<U0057><U0065><U0064><U006E><U0065><U0073><U0064><U0061><U0079>";/ -+ "<U0054><U0068><U0075><U0072><U0073><U0064><U0061><U0079>";/ -+ "<U0046><U0072><U0069><U0064><U0061><U0079>";/ -+ "<U0053><U0061><U0074><U0075><U0072><U0064><U0061><U0079>" -+ -+% Abbreviated month names (%b) -+abmon "<U004A><U0061><U006E>";"<U0046><U0065><U0062>";/ -+ "<U004D><U0061><U0072>";"<U0041><U0070><U0072>";/ -+ "<U004D><U0061><U0079>";"<U004A><U0075><U006E>";/ -+ "<U004A><U0075><U006C>";"<U0041><U0075><U0067>";/ -+ "<U0053><U0065><U0070>";"<U004F><U0063><U0074>";/ -+ "<U004E><U006F><U0076>";"<U0044><U0065><U0063>" -+ -+% Full month names (%B) -+mon "<U004A><U0061><U006E><U0075><U0061><U0072><U0079>";/ -+ "<U0046><U0065><U0062><U0072><U0075><U0061><U0072><U0079>";/ -+ "<U004D><U0061><U0072><U0063><U0068>";/ -+ "<U0041><U0070><U0072><U0069><U006C>";/ -+ "<U004D><U0061><U0079>";/ -+ "<U004A><U0075><U006E><U0065>";/ -+ "<U004A><U0075><U006C><U0079>";/ -+ "<U0041><U0075><U0067><U0075><U0073><U0074>";/ -+ "<U0053><U0065><U0070><U0074><U0065><U006D><U0062><U0065><U0072>";/ -+ "<U004F><U0063><U0074><U006F><U0062><U0065><U0072>";/ -+ "<U004E><U006F><U0076><U0065><U006D><U0062><U0065><U0072>";/ -+ "<U0044><U0065><U0063><U0065><U006D><U0062><U0065><U0072>" -+ -+% Week description, consists of three fields: -+% 1. Number of days in a week. -+% 2. Gregorian date that is a first weekday (19971130 for Sunday, 19971201 for Monday). -+% 3. The weekday number to be contained in the first week of the year. -+% -+% ISO 8601 conforming applications should use the values 7, 19971201 (a -+% Monday), and 4 (Thursday), respectively. -+week 7;19971201;4 -+first_weekday 1 -+first_workday 1 -+ -+% Appropriate date and time representation (%c) -+% "%a %b %e %H:%M:%S %Y" -+d_t_fmt "<U0025><U0061><U0020><U0025><U0062><U0020><U0025><U0065><U0020><U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U0059>" -+ -+% Appropriate date representation (%x) -+% "%m/%d/%y" -+d_fmt "<U0025><U006D><U002F><U0025><U0064><U002F><U0025><U0079>" -+ -+% Appropriate time representation (%X) -+% "%H:%M:%S" -+t_fmt "<U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053>" -+ -+% Appropriate AM/PM time representation (%r) -+% "%I:%M:%S %p" -+t_fmt_ampm "<U0025><U0049><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U0070>" -+ -+% Equivalent of AM/PM (%p) "AM"/"PM" -+% -+am_pm "<U0041><U004D>";"<U0050><U004D>" -+ -+% Appropriate date representation (date(1)) "%a %b %e %H:%M:%S %Z %Y" -+date_fmt "<U0025><U0061><U0020><U0025><U0062><U0020><U0025><U0065><U0020><U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U005A><U0020><U0025><U0059>" -+END LC_TIME -+ -+LC_MESSAGES -+% This is the POSIX Locale definition for -+% the LC_NUMERIC category. -+% -+yesexpr "<U005E><U005B><U0079><U0059><U005D>" -+noexpr "<U005E><U005B><U006E><U004E><U005D>" -+yesstr "<U0059><U0065><U0073>" -+nostr "<U004E><U006F>" -+END LC_MESSAGES -+ -+LC_PAPER -+% This is the ISO/IEC 14652 "i18n" definition for -+% the LC_PAPER category. -+% (A4 paper, this is also used in the built in C/POSIX -+% locale in glibc/locale/C-paper.c) -+height 297 -+width 210 -+END LC_PAPER -+ -+LC_NAME -+% This is the ISO/IEC 14652 "i18n" definition for -+% the LC_NAME category. -+% "%p%t%g%t%m%t%f" -+% (also used in the built in C/POSIX locale in glibc/locale/C-name.c) -+name_fmt "<U0025><U0070><U0025><U0074><U0025><U0067><U0025><U0074>/ -+<U0025><U006D><U0025><U0074><U0025><U0066>" -+END LC_NAME -+ -+LC_ADDRESS -+% This is the ISO/IEC 14652 "i18n" definition for -+% the LC_ADDRESS category. -+% "%a%N%f%N%d%N%b%N%s %h %e %r%N%C-%z %T%N%c%N" -+% (also used in the built in C/POSIX locale in glibc/locale/C-address.c) -+postal_fmt "<U0025><U0061><U0025><U004E><U0025><U0066><U0025><U004E>/ -+<U0025><U0064><U0025><U004E><U0025><U0062><U0025><U004E><U0025><U0073>/ -+<U0020><U0025><U0068><U0020><U0025><U0065><U0020><U0025><U0072><U0025>/ -+<U004E><U0025><U0043><U002D><U0025><U007A><U0020><U0025><U0054><U0025>/ -+<U004E><U0025><U0063><U0025><U004E>" -+END LC_ADDRESS -+ -+LC_TELEPHONE -+% This is the ISO/IEC 14652 "i18n" definition for -+% the LC_TELEPHONE category. -+% "+%c %a %l" -+tel_int_fmt "<U002B><U0025><U0063><U0020><U0025><U0061><U0020><U0025>/ -+<U006C>" -+% (also used in the built in C/POSIX locale in glibc/locale/C-telephone.c) -+END LC_TELEPHONE -+ -+LC_MEASUREMENT -+% This is the ISO/IEC 14652 "i18n" definition for -+% the LC_MEASUREMENT category. -+% (same as in the built in C/POSIX locale in glibc/locale/C-measurement.c) -+%metric -+measurement 1 -+END LC_MEASUREMENT -+ --- -2.4.3 - diff --git a/testing/source/glibc/glibc-cvs-checkout.sh b/testing/source/glibc/glibc-cvs-checkout.sh deleted file mode 100755 index 022d0117..00000000 --- a/testing/source/glibc/glibc-cvs-checkout.sh +++ /dev/null @@ -1,3 +0,0 @@ -echo "The password below is \"anoncvs\":" -cvs -z 9 -d :pserver:anoncvs@sources.redhat.com:/cvs/glibc login -cvs -z 9 -d :pserver:anoncvs@sources.redhat.com:/cvs/glibc co libc diff --git a/testing/source/glibc/glibc.SlackBuild b/testing/source/glibc/glibc.SlackBuild deleted file mode 100755 index fbe08804..00000000 --- a/testing/source/glibc/glibc.SlackBuild +++ /dev/null @@ -1,467 +0,0 @@ -#!/bin/bash - -# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -cd $(dirname $0) ; CWD=$(pwd) - -PKGNAM=glibc -VERSION=${VERSION:-$(echo glibc-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} -CHECKOUT=${CHECKOUT:-""} -BUILD=${BUILD:-1} - -# I was considering disabling NSCD, but MoZes talked me out of it. :) -#DISABLE_NSCD=" --disable-nscd " - -# $ARCH may be preset, otherwise i586 compatibility with i686 binary -# structuring is the Slackware default. -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i586 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -# If the variable PRINT_PACKAGE_NAME is set, then this script will report what -# the name of the created package would be, and then exit. This information -# could be useful to other scripts. -if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then - echo "glibc-$VERSION-$ARCH-$BUILD.txz" - echo "glibc-i18n-$VERSION-$ARCH-$BUILD.txz" - echo "glibc-profile-$VERSION-$ARCH-$BUILD.txz" - echo "glibc-solibs-$VERSION-$ARCH-$BUILD.txz" - exit 0 -fi - -NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} - -# Work around -Werror failure with gcc-8.2.0. -# NOTE: Until the next glibc release takes care of this issue, this will -# likely need to be updated with every new gcc release's version. Yes, we -# could pass --disable-werror by default, but I'd rather not just shove a -# stick in it like that. -if [ "$(gcc -dumpversion)" = "8.2.0" ]; then - if [ "$VERSION" = "2.27" ]; then - WERROR="--disable-werror" - fi -fi - -# I'll break this out as an option for fun :-) -case $ARCH in - i386) - OPTIMIZ="-O3 -march=i386 -mcpu=i686" - LIBDIRSUFFIX="" - ;; - i486) - OPTIMIZ="-O3 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" - ;; - i586) - OPTIMIZ="-O3 -march=i586 -mtune=i686" - LIBDIRSUFFIX="" - ;; - i686) - OPTIMIZ="-O3 -march=i686" - LIBDIRSUFFIX="" - ;; - athlon) - OPTIMIZ="-O3 -march=athlon" - LIBDIRSUFFIX="" - ;; - s390) - OPTIMIZ="-O3" - LIBDIRSUFFIX="" - ;; - x86_64) - OPTIMIZ="-O3 -fPIC" - LIBDIRSUFFIX="64" - ;; - *) - OPTIMIZ="-O3" - LIBDIRSUFFIX="" - ;; -esac - -case $ARCH in - x86_64) - TARGET=${TARGET:-x86_64} - ;; - i586) - # This should be i586 for all 32-bit x86 arch: - TARGET=${TARGET:-i586} - ;; -esac - -# Hand off the $ARCH variable to $SLACKWARE_ARCH to avoid confusing glibc: -SLACKWARE_ARCH=$ARCH -unset ARCH - -CVSVER=${VERSION}${CHECKOUT} - -# NOTE!!! glibc needs to be built against the sanitized kernel headers, -# which will be installed under /usr/include by the kernel-headers package. -# Be sure the correct version of the headers package is installed BEFORE -# building glibc! - -TMP=${TMP:-/tmp} -mkdir -p $TMP - -# This function fixes a doinst.sh file for x86_64. -# With thanks to Fred Emmott. -fix_doinst() { - if [ "x$LIBDIRSUFFIX" = "x" ]; then - return; - fi; - # Fix "( cd usr/lib ;" occurrences - sed -i "s#lib ;#lib${LIBDIRSUFFIX} ;#" install/doinst.sh - # Fix "lib/" occurrences - sed -i "s#lib/#lib${LIBDIRSUFFIX}/#g" install/doinst.sh - # Fix "( cd lib" occurrences - sed -i "s#( cd lib\$#( cd lib${LIBDIRSUFFIX}#" install/doinst.sh - - if [ "$SLACKWARE_ARCH" = "x86_64" ]; then - sed -i 's#ld-linux.so.2#ld-linux-x86-64.so.2#' install/doinst.sh - fi -} - -# This is a patch function to put all glibc patches in the build script -# up near the top. -apply_patches() { - # Use old-style locale directories rather than a single (and strangely - # formatted) /usr/lib/locale/locale-archive file: - zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1 - # Support ru_RU.CP1251 locale: - zcat $CWD/glibc.ru_RU.CP1251.diff.gz | patch -p1 --verbose || exit 1 - # Add a C.UTF-8 locale: - zcat $CWD/glibc-c-utf8-locale.patch.gz | patch -p1 --verbose || exit 1 - # Don't use AM/PM format for date(1). That's just plain crazy. - zcat $CWD/glibc-2.29.en_US.no.am.pm.date.format.diff.gz | patch -p1 --verbose || exit 1 - # Other regression fixes from git: - for git_patch in $CWD/patches/*.patch.gz ; do - zcat $git_patch | patch -p1 --verbose || exit 1 - done -} - -# This is going to be the initial $DESTDIR: -export PKG=$TMP/package-glibc-incoming-tree -PGLIBC=$TMP/package-glibc -PSOLIBS=$TMP/package-glibc-solibs -PI18N=$TMP/package-glibc-i18n -PPROFILE=$TMP/package-glibc-profile -PDEBUG=$TMP/package-glibc-debug - -# Empty these locations first: -for dir in $PKG $PGLIBC $PSOLIBS $PZONE $PI18N $PPROFILE $PDEBUG ; do - if [ -d $dir ]; then - rm -rf $dir - fi - mkdir -p $dir -done -if [ -d $TMP/glibc-$VERSION ]; then - rm -rf $TMP/glibc-$VERSION -fi - -# Create an incoming directory structure for glibc to be built into: -mkdir -p $PKG/lib${LIBDIRSUFFIX} -mkdir -p $PKG/sbin -mkdir -p $PKG/usr/bin -mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} -mkdir -p $PKG/usr/sbin -mkdir -p $PKG/usr/include -mkdir -p $PKG/usr/doc -mkdir -p $PKG/usr/man -mkdir -p $PKG/usr/share -mkdir -p $PKG/var/db/nscd -mkdir -p $PKG/var/run/nscd - -# Begin extract/compile: -cd $TMP -rm -rf glibc-$CVSVER -tar xvf $CWD/glibc-$CVSVER.tar.xz \ - || tar xvf $CWD/glibc-$CVSVER.tar.lz \ - || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \ - || tar xvf $CWD/glibc-$CVSVER.tar.gz -cd glibc-$CVSVER - -# Apply patches; exit if any fail. -apply_patches -if [ ! $? = 0 ]; then - exit 1 -fi - -# Clean up leftover CVS directories: -find . -type d -name CVS -exec rm -r {} \+ 2> /dev/null - -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \+ -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \+ - -# Make build directory: -mkdir build-glibc-$VERSION -cd build-glibc-$VERSION || exit 1 - -echo "BUILDING DAS NPTL GLIBC" -CFLAGS="-g $OPTIMIZ" \ -../configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --enable-kernel=2.6.32 \ - --with-headers=/usr/include \ - --enable-add-ons \ - --enable-obsolete-nsl \ - --enable-obsolete-rpc \ - --enable-profile \ - $DISABLE_NSCD \ - $WERROR \ - --infodir=/usr/info \ - --mandir=/usr/man \ - --with-tls \ - --with-__thread \ - --without-cvs \ - $TARGET-slackware-linux - -make $NUMJOBS || exit 1 -make $NUMJOBS install install_root=$PKG || exit 1 -# Don't use this, as it makes the i18n package WAY bigger: -#make localedata/install-locale-files DESTDIR=$PKG || exit 1 -# This is ugly run in parallel, and seems to hang at the end. But it actually -# completes much faster. :) -make $NUMJOBS localedata/install-locales install_root=$PKG DESTDIR=$PKG || exit 1 - -# We've always had an sln symlink in /bin, so let's make sure it -# remains there so as not to break any scripts that might need it: -mkdir -p $PKG/bin -( cd $PKG/bin ; ln -sf /sbin/sln sln ) - -# This bit was mostly copped from Fedora Rawhide's .spec file. I'm not -# entirely sure how important it is, since I'm not aware of anything -# we ship trying to link libpthread as static. What it does is make sure -# that anything linking libpthread static includes all of the functions -# so that the resulting binary doesn't rely on parts of the library that -# were not linked in. Optimizing actually working over binary size, so -# to speak. -( cd $PKG/usr/lib${LIBDIRSUFFIX} - gcc -r -nostdlib -o libpthread.o -Wl,--whole-archive ./libpthread.a - rm libpthread.a - ar rcs libpthread.a libpthread.o - rm libpthread.o -) - -# The prevailing standard seems to be putting unstripped libraries in -# /usr/lib/debug/ and stripping the debugging symbols from all the other -# libraries. -mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/debug -cp -a $PKG/lib${LIBDIRSUFFIX}/l*.so* $PKG/usr/lib${LIBDIRSUFFIX}/debug -cp -a $PKG/usr/lib${LIBDIRSUFFIX}/*.a $PKG/usr/lib${LIBDIRSUFFIX}/debug -# Don't need debug+profile: -( cd $PKG/usr/lib${LIBDIRSUFFIX}/debug ; rm -f *_p.* ) -# NOTE: Is there really a reason for the glibc-debug package? -# If you're debugging glibc, you can also compile it, right? - -## COMMENTED OUT: There's no reason for profile libs to include -g information. -## Put back unstripped profiling libraries: -#mv $PKG/usr/lib${LIBDIRSUFFIX}/debug/*_p.a $PKG/usr/lib${LIBDIRSUFFIX} -# It might be best to put the unstripped and profiling libraries in glibc-debug and glibc-profile. - -# I don't think "strip -g" causes the pthread problems. It's --strip-unneeded that does. -strip -g $PKG/lib${LIBDIRSUFFIX}/l*.so* -strip -g $PKG/usr/lib${LIBDIRSUFFIX}/l*.so* -strip -g $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a - -# Remove the rquota.x and rquota.h include files, as they are provided by -# the quota package: -rm -f $PKG/usr/include/rpcsvc/rquota.{h,x} - -# Back to the sources dir to add some files/docs: -cd $TMP/glibc-$CVSVER - -# We'll automatically install the config file for the Name Server Cache Daemon. -# Perhaps this should also have some commented-out startup code in rc.inet2... -mkdir -p $PKG/etc -cat nscd/nscd.conf > $PKG/etc/nscd.conf.new - -# Install docs: -( mkdir -p $PKG/usr/doc/glibc-$VERSION - cp -a \ - BUGS CONFORMANCE COPYING* FAQ INSTALL LICENSES NAMESPACE \ - NEWS NOTES PROJECTS README* \ - $PKG/usr/doc/glibc-$VERSION -) - -# Trim the NEWS file to omit ancient history: -if [ -r NEWS ]; then - DOCSDIR=$(echo $PKG/usr/doc/glibc-$VERSION) - cat NEWS | head -n 1000 > $DOCSDIR/NEWS - touch -r NEWS $DOCSDIR/NEWS -fi - -# OK, there are some very old Linux standards that say that any binaries in a /bin or -# /sbin directory (and the directories themselves) should be group bin rather than -# group root, unless a specific group is really needed for some reason. -# -# I can't find any mention of this in more recent standards docs, and always thought -# that it was pretty cosmetic anyway (hey, if there's a reason -- fill me in!), so -# it's possible that this ownership change won't be followed in the near future -# (it's a PITA, and causes many bug reports when the perms change is occasionally -# forgotten). -# -# But, it's hard to get me to break old habits, so we'll continue the tradition here: -# -# No, no we won't. You know how we love to break traditions. - -# Strip most binaries: -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null -) - -# Fix info dir: -rm $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* - -# This is junk -rm $PKG/etc/ld.so.cache -( cd $PKG - find . -name "*.orig" -exec rm {} \+ -) - -################################## -# OK, time to make some packages # -################################## - -# glibc-profile: -cd $PPROFILE -mkdir -p usr/lib${LIBDIRSUFFIX} -# Might as well just grab these with 'mv' to simplify things later: -mv $PKG/usr/lib${LIBDIRSUFFIX}/lib*_p.a usr/lib${LIBDIRSUFFIX} -# Profile libs should be stripped. Use the debug libs to debug... -( cd usr/lib${LIBDIRSUFFIX} ; strip -g *.a ) -mkdir install -cp -a $CWD/slack-desc.glibc-profile install/slack-desc -makepkg -l y -c n $TMP/glibc-profile-$VERSION-$SLACKWARE_ARCH-$BUILD.txz - -# THIS IS NO LONGER PACKAGED (or is it? might be better to let it be made, and then ship it or not...) -# glibc-debug: -cd $PDEBUG -mkdir -p usr/lib${LIBDIRSUFFIX} -# Might as well just grab these with 'mv' to simplify things later: -mv $PKG/usr/lib${LIBDIRSUFFIX}/debug usr/lib${LIBDIRSUFFIX} -mkdir install -cp -a $CWD/slack-desc.glibc-debug install/slack-desc -## Don't package this: -#makepkg -l y -c n $TMP/glibc-debug-$VERSION-$SLACKWARE_ARCH-$BUILD.txz -## INSTEAD, NUKE THESE LIBS -#rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/debug - -# glibc-i18n: -cd $PI18N -mkdir -p usr/lib${LIBDIRSUFFIX}/locale -mv $PKG/usr/lib${LIBDIRSUFFIX}/locale/* usr/lib${LIBDIRSUFFIX}/locale -mkdir -p usr/share/{i18n,locale} -mv $PKG/usr/share/i18n/* usr/share/i18n -mv $PKG/usr/share/locale/* usr/share/locale -# Leave copies of the C, POSIX, and en_US locales in the main glibc package: -cp -a usr/lib${LIBDIRSUFFIX}/locale/{C,en_US}* $PKG/usr/lib${LIBDIRSUFFIX}/locale -mkdir -p $PKG/usr/share/i18n/locales -cp -a usr/share/i18n/locales/{C,POSIX,en_US} $PKG/usr/share/i18n/locales -mkdir install -cp -a $CWD/slack-desc.glibc-i18n install/slack-desc -makepkg -l y -c n $TMP/glibc-i18n-$VERSION-$SLACKWARE_ARCH-$BUILD.txz - -# glibc-solibs: -cd $PSOLIBS -mkdir -p etc/profile.d -cp -a $CWD/profile.d/* etc/profile.d -chown -R root:root etc -chmod 755 etc/profile.d/* -mkdir -p lib${LIBDIRSUFFIX} -cp -a $PKG/lib${LIBDIRSUFFIX}/* lib${LIBDIRSUFFIX} -( cd lib${LIBDIRSUFFIX} - mkdir incoming - mv *so* incoming - mv incoming/libSegFault.so . -) -mkdir -p usr -cp -a $PKG/usr/bin usr -mv usr/bin/ldd . -rm usr/bin/* -mv ldd usr/bin -mkdir -p usr/lib${LIBDIRSUFFIX} -# The gconv directory has a lot of stuff, but including it here will save some problems. -# Seems standard elsewhere. -cp -a $PKG/usr/lib${LIBDIRSUFFIX}/gconv usr/lib${LIBDIRSUFFIX} -mkdir -p usr/libexec -cp -a $PKG/usr/libexec/pt_chown usr/libexec -# Same usr.bin deal: -cp -a $PKG/sbin . -mv sbin/ldconfig . -rm sbin/* -mv ldconfig sbin -mkdir install -cp -a $CWD/slack-desc.glibc-solibs install/slack-desc -cp -a $CWD/doinst.sh-glibc-solibs install/doinst.sh -# Fix specific versioning for the symlink creation script. This part of the -# script would only be used in the case where there is no ldconfig on the -# running system that's used to install the package. That should never be the -# case, but we'll leave the code in place anyway just in case. -sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh -# Call the function to fix doinst.sh where $LIBDIRSUFFIX is needed: -fix_doinst -# Only scrub the links in /lib{,64} that will be created by ldconfig: -find lib${LIBDIRSUFFIX} -type l -exec rm {} \+ -# Build the package: -makepkg -l y -c n $TMP/glibc-solibs-$VERSION-$SLACKWARE_ARCH-$BUILD.txz - -# And finally, the complete "all-in-one" glibc package is created -# from whatever was leftover: -cd $PGLIBC -mv $PKG/* . -mkdir -p etc/profile.d -cp -a $CWD/profile.d/* etc/profile.d -chown -R root:root etc -chmod 755 etc/profile.d/* -# Only scrub the links in /lib{,64} that will be created by ldconfig: -find lib${LIBDIRSUFFIX} -type l -exec rm {} \+ -mkdir install -cp -a $CWD/slack-desc.glibc install/slack-desc -cp -a $CWD/doinst.sh-glibc install/doinst.sh -# Fix specific versioning for the symlink creation script. This part of the -# script would only be used in the case where there is no ldconfig on the -# running system that's used to install the package. That should never be the -# case, but we'll leave the code in place anyway just in case. -sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh -# Call the function to fix doinst.sh where $LIBDIRSUFFIX is needed: -fix_doinst -( cd lib${LIBDIRSUFFIX} - mkdir incoming - mv *so* incoming - mv incoming/libSegFault.so . -) -# Build the package: -/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$SLACKWARE_ARCH-$BUILD.txz - -# Done! -echo -echo "glibc packages built in $TMP!" diff --git a/testing/source/glibc/glibc.locale.no-archive.diff b/testing/source/glibc/glibc.locale.no-archive.diff deleted file mode 100644 index 173bafc7..00000000 --- a/testing/source/glibc/glibc.locale.no-archive.diff +++ /dev/null @@ -1,10 +0,0 @@ ---- ./localedata/Makefile.orig 2019-02-16 14:05:01.794154302 -0600 -+++ ./localedata/Makefile 2019-02-16 14:06:25.744146460 -0600 -@@ -413,6 +413,7 @@ - echo -n '...'; \ - input=`echo $$locale | sed 's/\([^.]*\)[^@]*\(.*\)/\1\2/'`; \ - $(LOCALEDEF) $$flags --alias-file=../intl/locale.alias \ -+ --no-archive \ - -i locales/$$input -f charmaps/$$charset \ - $(addprefix --prefix=,$(install_root)) $$locale \ - && echo ' done'; diff --git a/testing/source/glibc/glibc.ru_RU.CP1251.diff b/testing/source/glibc/glibc.ru_RU.CP1251.diff deleted file mode 100644 index 376cf76a..00000000 --- a/testing/source/glibc/glibc.ru_RU.CP1251.diff +++ /dev/null @@ -1,10 +0,0 @@ ---- ./localedata/SUPPORTED.orig 2005-07-17 20:50:35.000000000 -0500 -+++ ./localedata/SUPPORTED 2006-08-22 01:33:09.000000000 -0500 -@@ -270,6 +270,7 @@ - ro_RO/ISO-8859-2 \ - ru_RU.KOI8-R/KOI8-R \ - ru_RU.UTF-8/UTF-8 \ -+ru_RU.CP1251/CP1251 \ - ru_RU/ISO-8859-5 \ - ru_UA.UTF-8/UTF-8 \ - ru_UA/KOI8-U \ diff --git a/testing/source/glibc/profile.d/glibc.csh.new b/testing/source/glibc/profile.d/glibc.csh.new deleted file mode 100755 index 1f33e966..00000000 --- a/testing/source/glibc/profile.d/glibc.csh.new +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/csh -# Set more relaxed (glibc-2.3.5 like) malloc() checking. -# -# This relaxes the default paranoia level so that it reports -# bugs, but does not kill the questionable process. You can -# get away with running broken programs with this setting, -# but at a possible performance and security cost. -# -#setenv MALLOC_CHECK_ 1 diff --git a/testing/source/glibc/profile.d/glibc.sh.new b/testing/source/glibc/profile.d/glibc.sh.new deleted file mode 100755 index 979f4879..00000000 --- a/testing/source/glibc/profile.d/glibc.sh.new +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh -# Set more relaxed (glibc-2.3.5 like) malloc() checking. -# -# This relaxes the default paranoia level so that it reports -# bugs, but does not kill the questionable process. You can -# get away with running broken programs with this setting, -# but at a possible performance and security cost. -#export MALLOC_CHECK_=1 diff --git a/testing/source/glibc/slack-desc.glibc b/testing/source/glibc/slack-desc.glibc deleted file mode 100644 index 63992d6b..00000000 --- a/testing/source/glibc/slack-desc.glibc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -glibc: glibc (GNU C libraries) -glibc: -glibc: This package contains the GNU C libraries and header files. You'll -glibc: need this package to compile programs. -glibc: -glibc: The GNU C library was originally authored by Roland McGrath. -glibc: -glibc: Homepage: https://www.gnu.org/software/libc/ -glibc: -glibc: -glibc: diff --git a/testing/source/glibc/slack-desc.glibc-debug b/testing/source/glibc/slack-desc.glibc-debug deleted file mode 100644 index 8cb64d59..00000000 --- a/testing/source/glibc/slack-desc.glibc-debug +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -glibc-debug: glibc-debug (GNU C libraries with debugging symbols) -glibc-debug: -glibc-debug: This package contains versions of the GNU C libraries with debugging -glibc-debug: information. These are needed only if you wish to be able to step -glibc-debug: through C library routines while debugging programs. Most debugging -glibc-debug: efforts will not require these. -glibc-debug: To use these libraries, set LD_LIBRARY_PATH when calling the debugger: -glibc-debug: LD_LIBRARY_PATH=/usr/lib/debug gdb <executable> -glibc-debug: -glibc-debug: Or, use this approach if you need to debug a setuid binary: -glibc-debug: su user -c "LD_LIBRARY_PATH=/usr/lib/debug gdb <executable>" diff --git a/testing/source/glibc/slack-desc.glibc-i18n b/testing/source/glibc/slack-desc.glibc-i18n deleted file mode 100644 index a697bc3d..00000000 --- a/testing/source/glibc/slack-desc.glibc-i18n +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -glibc-i18n: glibc-i18n (locale files from glibc) -glibc-i18n: -glibc-i18n: These files go in /usr/lib/locale, /usr/share/i18n/, and -glibc-i18n: /usr/share/locale/ to provide internationalization support. -glibc-i18n: You'll need this package unless you will be using US English only. -glibc-i18n: -glibc-i18n: -glibc-i18n: -glibc-i18n: -glibc-i18n: -glibc-i18n: diff --git a/testing/source/glibc/slack-desc.glibc-profile b/testing/source/glibc/slack-desc.glibc-profile deleted file mode 100644 index 4b4100e0..00000000 --- a/testing/source/glibc/slack-desc.glibc-profile +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -glibc-profile: glibc-profile (GNU C libraries with profiling support) -glibc-profile: -glibc-profile: This package contains static versions of the GNU C libraries with -glibc-profile: support for profiling binaries using gprof. gprof calculates how -glibc-profile: much time a program spends in each routine which can suggest where -glibc-profile: to concentrate efforts to improve performance. -glibc-profile: -glibc-profile: See the gprof man page for more details. -glibc-profile: -glibc-profile: -glibc-profile: diff --git a/testing/source/glibc/slack-desc.glibc-solibs b/testing/source/glibc/slack-desc.glibc-solibs deleted file mode 100644 index a538452f..00000000 --- a/testing/source/glibc/slack-desc.glibc-solibs +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -glibc-solibs: glibc-solibs (shared GNU C libraries) -glibc-solibs: -glibc-solibs: This package contains the shared libraries, binaries, and support -glibc-solibs: files required to run most Linux applications linked with glibc. -glibc-solibs: -glibc-solibs: -glibc-solibs: -glibc-solibs: -glibc-solibs: -glibc-solibs: -glibc-solibs: |